Estudo e caracterização mecânica de compósitos reforçados com fibras naturais

As crescentes preocupações ambientais e a necessidade de um desenvolvimento sustentável tem proporcionado um grande interesse no estudo e desenvolvimento de materiais mais ecológicos e amigos do ambiente. No caso particular da indústria dos materiais compósitos, a utilização de fibras naturais de origem vegetal, em substituição das tradicionais fibras de vidro, tem aumentado significativamente nos últimos anos. Para além dos claros benefícios ecológicos, a utilização de fibras naturais em detrimento das fibras de vidro, possibilita também o fabrico de componentes com baixo peso, boas propriedades mecânicas, baixo custo, pouco abrasivos às ferramentas de produção e com boas propriedades de isolamento térmico e acústico. Contudo, existem também algumas limitações decorrentes da utilização de fibras naturais como reforço de materiais poliméricos, como exemplo, a possibilidade de emitirem odores e absorverem água, a falta de adesão entre as fibras e as matrizes e o facto de possuírem baixa resistência à temperatura. No presente trabalho, foram estudadas e analisadas as propriedades mecânicas de laminados de matriz termoendurecível de epóxido e poliéster, reforçados com várias camadas de tecido bidireccional de fibras de juta. Para além dos referidos laminados, foram também produzidos e estudados compósitos de matriz termoplástica biodegradável de PLA (ácido poliláctico), reforçados com fibras curtas de juta. Todos os compósitos produzidos foram sujeitos a ensaios de tracção e flexão e as suas propriedades foram comparadas. O tecido de juta utilizado como reforço dos compósitos fabricados, foi caracterizado através de vários ensaios, utilizados tipicamente na indústria têxtil. As propriedades extraídas destes ensaios, foram úteis para a previsão das propriedades mecânicas dos materiais compósitos fabricados.Por fim, foi realizada uma análise critica sobres todos os resultados extraídos dos ensaios efectuados.

Kytkentäaineet puumuovikomposiiteissa

Puumuovikomposiittien valmistuksessa yhdistetään kaksi toisistaan eroavaa materiaalia jolloin saadaan aikaan materiaalien ominaisuuksien ainutlaatuinen yhdistelmä. Polymeerimateriaaleina käytetään pääasiassa erilaisia kestomuoveja. Kuitumateriaaleina voidaan käyttää puujauhetta, sahanpurua, paperin- ja kartongin valmistuksessa käytettävää sellua, nanoselluloosaa tai muita puukuitumateriaaleja. Polaarisen puukuidun ja polaarittoman muovimateriaalin välinen materiaalien rajapinnan adheesio on yleensä riittämätöntä, mikä vaikuttaa lopputuotteen ominaisuuksien heikkenemiseen. Kyseinen ongelma on pyritty ratkaisemaan käyttämällä erilaisia kytkentäaineita. Tässä työssä keskitytään käsittelemään erilaisia puumuovikomposiittien kytkentäaineita, niiden toimintaa sekä vaikutuksia lopputuotteeseen. Lisäksi työssä esitellään myös puumuovikomposiittien valmistusmateriaaleja ja valmistusprosesseja.

Effect of cold plasma treatment on mechanical properties of PET/PMMA composites

Mechanical strength of polyethylene terephthalate (PET) fibres and polymethyl methacrylate (PMMA) matrix composites were studied with particular interest on the effects of oxygen and argon plasma treated fibres. PET. fibres were treated in a radio frequency plasma reactor using argon or oxygen for different treatment times to increase the interface adhesion. Fibre volume fraction was measured through digital image analysis. Elastic moduli resulted between 3 GPa for untreated to 6 GPa for treated composites. Tensile tests on PET fibres showed that plasma treatment caused a decrease in average tensile strength compared to untreated fibres. Fracture analysis confirmed the increase in interfacial adhesion due to plasma treatment. (c) 2004 Elsevier Ltd. All rights reserved.

Influence of Insertion Techniques for Resin Cement and Mechanical Cycling on the Bond Strength Between Fiber Posts and Root Dentin

Purpose: To evaluate the effect of the insertion technique for resin cement and mechanical cycling on the bond strength between fiber posts and root dentin.Materials and Methods: Sixty-four single-rooted bovine teeth were endodontically prepared to receive glass-fiber posts. The insertion of cement into the root canal was performed using one of the following techniques: POS, insertion with the post; LEN, the use of a lentulo-type drill; EXP, insertion with a straight-tip explorer; or CEN, the use of a Centrix syringe. Half of the specimens were mechanically cycled. All specimens were sectioned into slices of 1.8 mm for the push-out test and 0.5 mm for analysis of the cement layer quality.Results: The insertion technique affected the interaction between factors (bond strength and mechanical cycling; p < 0.0001). Insertion of the Centrix syringe after mechanical cycling showed the highest bond values (13.6 +/- 3.2 MPa). Group-to-group comparisons for baseline and cycled conditions indicated that mechanical cycling significantly influenced the bond strength (p < 0.0001) of the POS and CEN groups. The quality of the cement layer did not differ between the techniques when evaluated in the middle (p = 0.0612) and cervical (p = 0.1119) regions, but did differ in the apical region (p = 0.0097), where the CEN group had better layer quality for the two conditions tested (baseline and cycled).Conclusion: The use of the Centrix syringe improved the homogeneity of the cement layer, reducing the defects in the layer and increasing adhesive strength values to dentin, even after mechanical cycling.

Adhesion of Salmonella enterica var Enteritidis strains lacking fimbriae and flagella to rat ileal explants cultured at the air interface or submerged in tissue culture medium

Rat ileal air interface and submerged explant models were developed and used to compare the adhesion of Salmonella enterica var Enteritidis wild-type strains with that of their isogenic single and multiple deletion mutants. The modified strains studied were defective for fimbriae, flagella, motility or chemotaxis and binding was assessed on tissues with and without an intact mucus layer. A multiple afimbriate/aflagellate (fim(-)/fla(-)) strain, a fimbriate but aflagellate (fla(-)) strain and a fimbriate/flagellate but non-motile (mot(-)) strain bound significantly less extensively to the explants than the corresponding wild-type strains. With the submerged explant model this difference was evident in tissues with or without a mucus layer, whereas in the air interface model it was observed only in tissues,vith an intact mucus layer. A smooth swimming chemotaxis-defective (che(-)) strain and single or multiple afimbriate strains bound to explants as well as their corresponding wild-type strain. This suggests that under the present experimental conditions fimbriae were not essential for attachment of S. enterica var Enteritidis to rat ileal explants, However; the possession of active flagella did appear to be an important factor. in enabling salmonellae to penetrate the gastrointestinal mucus layer and attach specifically to epithelial cells.

Evaluation of interface characterization and adhesion of glass ceramics to commercially pure titanium and gold alloy after thermal- and mechanical-loading

Objectives. This study evaluated the effect of thermal- and mechanical-cycling on the shear bond strength of three low-fusing glassy matrix dental ceramics to commercial pure titanium (cpTi) when compared to conventional feldspathic ceramic fused to gold alloy.Methods. Metallic frameworks (diameter: 5 min, thickness: 4 mm) (N = 96, n = 12 per group) were cast in cpTi and gold alloy, airborne particle abraded with 150 mu m aluminum oxide. Low-fusing glassy matrix ceramics and a conventional feldspathic ceramic were fired onto the alloys (thickness: 4mm). Four experimental groups were formed; Gr1 (control group): Vita Omega 900-Au-Pd alloy; Gr2: Ticeram-cpTi; Gr3: Super Porcelain Ti-22-cpTi and G4: Vita Titankeramik-cpTi. While half of the specimens from each ceramic-metal combination were randomly tested without aging (water storage at 37 C for 24h only), the other half were first thermocycled (6000 cycles, between 5 and 55 C, dwell time: 13 s) and then mechanically loaded (20,000 cycles under SON load, immersion in distilled water at 37 C). The ceramic-alloy interfaces were loaded under shear in a universal test machine (cross-head speed: 0.5 mm/min) until failure occur-red. Failure types were noted and the interfaces of the representative fractured specimens from each group were examined with stereo microscope and scanning electron microscope (SEM). in an additional study (N = 16, n = 2 per group), energy dispersive X-ray spectroscopy (EDS) analysis was performed from ceramic-alloy interfaces. Data were analyzed using ANOVA and Tukey's test.Results. Both ceramic-metal combinations (p < 0.001) and aging conditions (p < 0,001) significantly affected the mean bond strength values. Thermal- and mechanical-cycling decreased the bond strength (MPa) results significantly for Gr3 (33.4 +/- 4.2) and Gr4 (32.1 +/- 4.8) when compared to the non-aged groups (42.9 +/- 8.9, 42.4 +/- 5.2, respectively). Gr1 was not affected significantly from aging conditions (61.3 +/- 8.4 for control, 60.7 +/- 13.7 after aging) (p > 0.05). Stereomicroscope images showed exclusively adhesive failure types at the opaque ceramic-cpTi interfacial zone with no presence of ceramic on the substrate surface but with a visible dark titanium oxide layer in Groups 2-4 except Gr1 where remnants of bonder ceramic was visible. EDS analysis from the interfacial zone for cpTi-ceramic groups showed predominantly 34.5-85.1% O(2) followed by 1.1-36.7% Aland 0-36.3% Si except for Super Porcelain Ti-22 where a small quantity of Ba (1.4-8.3%), S (0.7%) and Sn (35.3%) was found. In the Au-Pd alloy-ceramic interface, 56.4-69.9% O(2) followed by 15.6-26.2% Si, 3.9-10.9% K, 2.8-6% Na, 4.4-9.6% Al and 0-0.04% Mg was observed.Significance. After thermal-cycling for 6000 times and mechanical-cycling for 20,000 times, Triceram-cpTi combination presented the least decrease among other ceramic-alloy combinations when compared to the mean bond strength results with Au-Pd alloy-Vita Omega 900 combination. (c) 2008 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Interface tailoring for adhesion enhancement of diamond-like carbon thin films

We have explored the suitability and characteristics of interface tailoring as a tool for enhancing the adhesion of hydrogen-free diamond-like carbon (DLC) thin films to silicon substrates. DLC films were deposited on silicon with and without application of an initial high energy carbon ion bombardment phase that formed a broad Si-C interface of gradually changing Si:C composition. The interface depth profile was calculated using the TRIDYN simulation program, revealing a gradient of carbon concentration including a region with the stoichiometry of silicon carbide. DLC films on silicon, with and without interface tailoring, were characterized using Raman spectroscopy, scanning electron microscopy, atomic force microscopy and scratch tests. The Raman spectroscopy results indicated sp3-type carbon bonding content of up to 80%. Formation of a broadened Si:C interface as formed here significantly enhances the adhesion of DLC films to the underlying silicon substrate. (C) 2012 Elsevier B.V. All rights reserved.

Red blood cell adhesion on a solid/liquid interface

Red blood cells (RBCs), previously fixed with glutaraldehyde, adhere to glass slides coated with fibrinogen. The RBC deposition process on the horizontal glass surface is investigated by analyzing the relative surface covered by the RBCs, as well as the variance of this surface coverage, as a function of the concentration of particles. This study is performed by optical microscopy and image analysis. A model, derived from the classical random sequential adsorption model, has been developed to account for the experimental results. This model highlights the strong influence of the hydrodynamic interactions during the deposition process.

Visualizing the dynamics of T cell activation: Intracellular adhesion molecule 1 migrates rapidly to the T cell/B cell interface and acts to sustain calcium levels

T cell recognition typically involves both the engagement of a specific T cell receptor with a peptide/major histocompatibility complex (MHC) and a number of accessory interactions. One of the most important interactions is between the integrin lymphocyte function-associated antigen 1 (LFA-1) on the T cell and intracellular adhesion molecule 1 (ICAM-1) on an antigen-presenting cell. By using fluorescence video microscopy and an ICAM-1 fused to a green fluorescent protein, we find that the elevation of intracellular calcium in the T cell that is characteristic of activation is followed almost immediately by the rapid accumulation of ICAM-1 on a B cell at a tight interface between the two cells. This increased density of ICAM-1 correlates with the sustained elevation of intracellular calcium in the T cell, known to be critical for activation. The use of peptide/MHC complexes and ICAM-1 on a supported lipid bilayer to stimulate T cells also indicates a major role for ICAM-1/LFA-1 in T cell activation but, surprisingly, not for adhesion, as even in the absence of ICAM-1 the morphological changes and adhesive characteristics of an activated T cell are seen in this system. We suggest that T cell antigen receptor-mediated recognition of a very small number of MHC/peptide complexes could trigger LFA-1/ICAM-1 clustering and avidity regulation, thus amplifying and stabilizing the production of second messengers.

Effects of Ultramorphological Changes on Adhesion to Lased Dentin-Scanning Electron Microscopy and Transmission Electron Microscopy Analysis

Dentin irradiation with erbium lasers has been reported to alter the composite resin bond to this treated surface. There is still a lack of studies reporting the effect of erbium lasers on dentin organic content and elucidating how laser treatment could interfere in the quality of the resin-dentin interface. This study aimed to evaluate the effect of erbium laser irradiation on dentin morphology and microtensile bond strength (lTBS) of an adhesive to dentin. Seventy-two dentin disks were divided into nine groups (n = 8): G1-Control (600-grit SiC paper); Er:YAG groups: G2-250 mJ/4 Hz; G3-200 mJ/4 Hz; G4-180 mJ/10 Hz; G5-160 mJ/10 Hz; Er, Cr:YSGG groups: G6-2 W/20 Hz; G7-2.5 W/20 Hz; G8-3 W/20 Hz; G9-4 W/20 Hz. Specimens were processed for cross-sectional analysis by scanning electron microscopy (SEM) (n = 3), transmission electron microscopy (TEM) (n = 2), and adhesive interface (n = 3). Forty-five dentin samples (n = 5) were restored and submitted to lTBS testing. ANOVA (alpha = 5%) revealed that G1 presented the highest lTBS values and irradiated groups did not differ from each other. TEM micrographs showed a superficial layer of denatured collagen fibrils. For SEM micrographs, it was possible to verify the laser effects extending to dentin subsurface presenting a rough aspect. Cross-sectional dentin micrographs of this hybridized surface revealed a pattern of modified tags with ringlike structures around it. This in vitro study showed that erbium laser irradiation interacts with the dental hard tissue resulting in a specific morphological pattern of dentin and collagen fibrils that negatively affected the bond strength to composite resin. Microsc. Res. Tech. 74:720-726, 2011. (C) 2010 Wiley-Liss, Inc.

Influence of crystallite size of nanophased hydroxyapatite on fibronectin and osteonectin adsorption and on MC3T3-E1 osteoblast adhesion and morphology

The characteristic topographical features (crystallite dimensions, surface morphology and roughness) of bioceramics may influence the adsorption of proteins relevant to bone regeneration. This work aims at analyzing the influence of two distinct nanophased hydroxyapatite (HA) ceramics, HA725 and HA1000 on fibronectin (FN) and osteonectin (ON) adsorption and MC3T3-E1 osteoblast adhesion and morphology. Both substrates were obtained using the same hydroxyapatite nanocrystals aggregates and applying the sintering temperatures of 725ºC and 1000ºC, respectively. The two proteins used in this work, FN as an adhesive glycoprotein and ON as a counter-adhesive protein, are known to be involved in the early stages of osteogenesis (cell adhesion, mobility and proliferation). The properties of the nanoHA substrates had an important role in the adsorption behavior of the two studied proteins and clearly affected the MC3T3- E1 morphology, distribution and metabolic activity. HA1000 surfaces presenting slightly larger grain size, higher root-mean-square roughness (Rq), lower surface area and porosity, allowed for higher amounts of both proteins adsorbed. These substrates also revealed increased number of exposed FN cell-binding domains as well as higher affinity for osteonectin. Regarding the osteoblast adhesion results, improved viability and cell number were found for HA1000 surfaces as compared to HA725 ones, independently of the presence or type of adsorbed protein. Therefore the osteoblast adhesion and metabolic activity seemed to be more sensitive to surfaces morphology and roughness than to the type of adsorbed proteins.

Foam pore size is a critical interface parameter of suction-based wound healing devices.

BACKGROUND: Suction-based wound healing devices with open-pore foam interfaces are widely used to treat complex tissue defects. The impact of changes in physicochemical parameters of the wound interfaces has not been investigated. METHODS: Full-thickness wounds in diabetic mice were treated with occlusive dressing or a suction device with a polyurethane foam interface varying in mean pore size diameter. Wound surface deformation on day 2 was measured on fixed tissues. Histologic cross-sections were analyzed for granulation tissue thickness (hematoxylin and eosin), myofibroblast density (α-smooth muscle actin), blood vessel density (platelet endothelial cell adhesion molecule-1), and cell proliferation (Ki67) on day 7. RESULTS: Polyurethane foam-induced wound surface deformation increased with polyurethane foam pore diameter: 15 percent (small pore size), 60 percent (medium pore size), and 150 percent (large pore size). The extent of wound strain correlated with granulation tissue thickness that increased 1.7-fold in small pore size foam-treated wounds, 2.5-fold in medium pore size foam-treated wounds, and 4.9-fold in large pore size foam-treated wounds (p < 0.05) compared with wounds treated with an occlusive dressing. All polyurethane foams increased the number of myofibroblasts over occlusive dressing, with maximal presence in large pore size foam-treated wounds compared with all other groups (p < 0.05). CONCLUSIONS: The pore size of the interface material of suction devices has a significant impact on the wound healing response. Larger pores increased wound surface strain, tissue growth, and transformation of contractile cells. Modification of the pore size is a powerful approach for meeting biological needs of specific wounds.

Secretory IgA and intestinal epithelial cells at the interface between homeostasis regulation and protection against infection

RESUME DESTINE A UN LARGE PUBLICL'intestin est le siège d'intenses agressions de la part de l'ensemble des aliments ingérés, de bactéries agressives dites pathogènes mais également de bactéries dites commensales peuplant naturellement les surfaces intestinales muqueuses. Pour faire face, notre organisme arbore de nombreux niveaux de protections tant physiques, chimiques, mécaniques mais aussi immunitaires. La présence d'un type particulier de cellules, les cellules épithéliales (IEC) assurant une protection physique, ainsi que la production d'anticorps spécialisés par le système immunitaire appelés immunoglobulines sécrétoires A (SlgA) servent conjointement de première ligne de défense contre ces agressions externes. Néanmoins, comment le dialogue s'articule entre ces deux partenaires reste incomplet.Nous avons donc décidé de mimer ces interactions en modélisant les surfaces muqueuses par une monocouche de cellules différenciées en laboratoire. Des souches bactériennes isolées de l'intestin humain seules ou associées à des SlgA non-spécifiques ont été mises au contact de ce modèle cellulaire nous permettant de conclure quant à la présence effective d'une modulation du dialogue bactérie/lEC impliquant une activation de la réponse cellulaire vers un état de tolérance mutuelle. De façon surprenante, nous avons par ailleurs mis en évidence un type d'interaction nouveau entre ces anticorps et ces bactéries. Une étude biochimique nous a permis de détailler un nouveau rôle des SlgA médié par les sucres présents à leur surface dans le maintien d'une relation pacifique avec les commensaux perpétuellement présents, relations qualifiées d'homésostase intestinale.Le rôle protecteur des SlgA a par ailleurs été abordé pour avoir une meilleure appréhension de leur impact au niveau cellulaire lors d'infection par Shigella flexneri, bactérie causant la Shigellose, diarrhée sanglante responsable de la mort de plus d'un million de personnes chaque année. Basée sur le même modèle cellulaire, cette étude nous a permis de démontrer une nouvelle entrée de ce pathogène directement via les IEC. La présence d'anticorps spécifiques à la surface des bactéries restreint leur champs d'action contre les cibles intracellulaires identifiées que sont les filaments soutenant le squelette de la cellule, les fibres d'actine ainsi que les jonctions serrées, réseaux de protéines clés des interactions entre cellules. Cette ouverture au niveau cellulaire apporte un nouvel élan quant à la compréhension du rôle protecteur des SlgA lors d'attaques de l'intestin, protection semblant dépendante d'une agrégation des bactéries.Pour finir, nous avons mis en évidence la détection directe par les cellules de la présence d'anticorps libres dans l'intestin ajoutant une nouvelle réplique dans le dialogue complexe entre ces deux piliers de l'équilibre intestinal que sont les SlgA et les cellules épithéliales.RESUMELa muqueuse intestinale est dotée d'un réseau complexe de protections physico-chimiques, mécaniques ou immunologiques. Associées à un système immunitaire omniprésent, les cellules épithéliales intestinales {IEC) bordant la lumière intestinale ont la double tâche de protéger l'intérieur de l'organisme stérile contre l'invasion et la dissémination d'agents pathogènes, et de maintenir une relation pacifique avec la flore intestinale, rôles également joués par les immunoglobulines sécrétoires A (SlgA), anticorps les plus abondamment présents à la surface des muqueuses. Tant les IEC que les SlgA sont ainsi décrites comme convergeant vers le même objectif ; néanmoins, les rouages de leurs interactions restent largement inconnus.Pour répondre à cette question, des monocouches épithéliales reconstituées in vitro ont été incubées avec des souches commensales telles que des Lactobacillus ou des Bifodobacteria, seules ou complexées avec des SlgA non-spécifiques, nous permettant de décrypter l'influence des SlgA sur la détection des bactéries par les IEC, favorisant l'adhésion bactérienne et la cohésion cellulaire, augmentant l'activation de la voie NF-κΒ ainsi que la sécrétion de la cytokine thymic stromal lymphopoietin contrairement à celle de médiateurs pro-inflammatoires qui reste inchangée. Par ailleurs, une interaction Fab-indépendante est suggérée dans l'interaction SlgA/bactéries. Comme une interaction de faible affinité a été décrite comme prenant naturellement place au niveau de l'intestin, nous avons donc disséqué les mécanismes sous- jacents en utilisant un large spectre de bactérie associés à des protéines soit recombinantes soit isolées à partir de colostrum, mettant en évidence un rôle crucial des N-glycanes présents sur la pièce sécrétoire et soulignant une nouvelle propriété des SlgA dans l'homéostase intestinale.Intrinsèquement liés aux caractéristiques des SlgA, nous nous sommes également focalisés sur leur rôle protecteur lors d'infection par l'enteropathogène Shigella flexneri reproduites in vitro sur des monocouches polarisées. Nous avons tout d'abord démontré une nouvelle porte d'entrée pour ce pathogène directement via les IEC. L'agrégation des bactéries par les SlgA confère aux cellules une meilleure résistance à l'infection, retardant croissance bactérienne et entrée cellulaire, affectant par ailleurs leur capacité à cibler le cytosquelette et les jonctions serrées. La formation de tels cargos détectés de façon biaisée par les IEC apparaît comme une explication plausible au maintien de la cohésion cellulaire médiée par les SlgA.Enfin, le retrotransport des SlgA à travers les IEC a été abordé soulignant une participation active de ces cellules dans la détection de l'environnement extérieur, les impliquant possiblement dans l'activation d'un état muqueux stable.Conjointement, ces résultats indiquent que les SlgA représentent l'un des éléments-clés à la surface de la muqueuse et soulignent la complexité du dialogue établi avec l'épithélium en vue du maintien d'un fragile équilibre intestinal.ABSTRACTThe intestinal mucosa is endowed with a complex protective network melting physiochemical, mechanical and immunological features. Beyond the ubiquitous intestinal immune system, intestinal epithelial cells (IEC) lying the mucosal surfaces have also the dual task to protect the sterile core against invasion and dissemination of pathogens, and maintain a peaceful relationship with commensal microorganisms, aims also achieved by the presence of high amounts of secretory immunoglobulins A (SlgA), the most abundant immunoglobulin present at mucosal surfaces. Both IEC and SlgA are thus described to converge toward the same goal but how their interplay is orchestrated is largely unknown.To address this question, in vitro reconstituted IEC monolayers were first apically incubated with commensal bacteria such as Lactobacillus or Bifodobacteria strains either alone or in complexes with non-specific SlgA. Favoring the bacterial adhesion and cellular cohesion, SlgA impacts on the cellular sensing of bacteria, increasing NF-κΒ activation, and leading to cytokine releases restricted to the thymic stromal lymphopoietin and unaffected expression of pro-inflammatory mediators. Of main interest, bacterial recognition by SlgA suggested a Fab-independent interaction. As this low affinity, called natural coating occurs in the intestine, we further dissected the underlying mechanisms using a larger spectrum of commensal strains associated with recombinant as well as colostrum-derived proteins and pinpointed a crucial role of N-glycans of the secretory component, emphasizing an underestimated role of carbohydrates and another properties of SlgA in mediating intestinal homeostasis.As mucosal protection is also anchored in SlgA and IEC features, we focused on the cellular role of SlgA. Using IEC apical infection by the enteropathogen Shigella flexneri, we have first demonstrated a new gate of entry for this pathogen directly via IEC. Specific SlgA bacterial aggregation conferred to the cells a better resistance to infection, delaying bacterial growth and cellular entry, affecting their ability to damage both the cytoskeleton and the tight junctions. Formation of such big cargos differentially detected by IEC appears as a plausible explanation sustaining at the cellular level the antibody-mediated mucosal protection.Finally, SlgA retrotransport across IEC has been tackled stressing an active IEC sensing of the external environment possibly involved in the steady-state mucosal activation.All together, these results indicate that SlgA represents one of the pivotal elements at mucosal surfaces highlighting the complexity of the dialogue established with the epithelium sustaining the fragile intestinal balance.The Intestinal mucosa is endowed with a complex protective network melting physiochemical, mechanical and immunological features. Beyond the ubiquitous intestinal immune system, intestinal epithelial cells (IEC) lying the mucosal surfaces have also the dual task to protect the sterile core against invasion and dissemination of pathogens, and maintain a peaceful relationship with commensal microorganisms, aims also achieved by the presence of high amounts of secretory immunoglobulins A (SlgA), the most abundant immunoglobulin present at mucosal surfaces. Both IEC and SlgA are thus described to converge toward the same goal but how their interplay is orchestrated is largely unknown.To address this question, in vitro reconstituted IEC monolayers were first apically incubated with commensal bacteria such as Lactobacillus or Bifodobacteria strains either alone or in complexes with non-specific SlgA. Favoring the bacterial adhesion and cellular cohesion, SlgA impacts on the cellular sensing of bacteria, increasing NF-κΒ activation, and leading to cytokine releases restricted to the thymic stromal lymphopoietin and unaffected expression of pro-inflammatory mediators. Of main interest, bacterial recognition by SlgA suggested a Fab-independent interaction. As this low affinity, called natural coating occurs in the intestine, we further dissected the underlying mechanisms using a larger spectrum of commensal strains associated with recombinant as well as colostrum-derived proteins and pinpointed a crucial role of N-glycans of the secretory component, emphasizing an underestimated role of carbohydrates and another properties of SlgA in mediating intestinal homeostasis.As mucosal protection is also anchored in SlgA and IEC features, we focused on the cellular role of SlgA. Using IEC apical infection by the enteropathogen Shigella flexneri, we have first demonstrated a new gate of entry for this pathogen directly via IEC. Specific SlgA bacterial aggregation conferred to the cells a better resistance to infection, delaying bacterial growth and cellular entry, affecting their ability to damage both the cytoskeleton and the tight junctions. Formation of such big cargos differentially detected by IEC appears as a plausible explanation sustaining at the cellular level the antibody-mediated mucosal protection.Finally, SlgA retrotransport across IEC has been tackled stressing an active IEC sensing of the external environment possibly involved in the steady-state mucosal activation.All together, these results indicate that SlgA represents one of the pivotal elements at mucosal surfaces highlighting the complexity of the dialogue established with the epithelium sustaining the fragile intestinal balance.

MgO/Ag(001) interface structure and STM images from first principles

The interface of MgO/Ag(001) has been studied with density functional theory applied to slabs. We have found that regular MgO films show a small adhesion to the silver substrate, the binding can be increased in off-stoichiometric regimes, either by the presence of O vacancies at the oxide film or by a small excess of O atoms at the interface between the ceramic to the metal. By means of theoretical methods, the scanning tunneling microscopy signatures of these films is also analyzed in some detail. For defect free deposits containing 1 or 2 ML and at low voltages, tunnelling takes place from the surface Ag substrate, and at large positive voltages Mg atoms are imaged. If defects, oxygen vacancies, are present on the surface of the oxide they introduce much easier channels for tunnelling resulting in big protrusions and controlling the shape of the image, the extra O stored at the interface can also be detected for very thin films.

MgO/Ag(001) interface structure and STM images from first principles

The interface of MgO/Ag(001) has been studied with density functional theory applied to slabs. We have found that regular MgO films show a small adhesion to the silver substrate, the binding can be increased in off-stoichiometric regimes, either by the presence of O vacancies at the oxide film or by a small excess of O atoms at the interface between the ceramic to the metal. By means of theoretical methods, the scanning tunneling microscopy signatures of these films is also analyzed in some detail. For defect free deposits containing 1 or 2 ML and at low voltages, tunnelling takes place from the surface Ag substrate, and at large positive voltages Mg atoms are imaged. If defects, oxygen vacancies, are present on the surface of the oxide they introduce much easier channels for tunnelling resulting in big protrusions and controlling the shape of the image, the extra O stored at the interface can also be detected for very thin films.