Seasonal, horizontal, and vertical distribution of phytoplankton chlorophyll a in the Northeast U.S. Continental Shelf Ecosystem

The broad scale features in the horizontal, vertical, and seasonal distribution of phytoplankton chlorophyll a on the northeast U.S. continental shelf are described based on 57,088 measurements made during 78 oceanographic surveys from 1977 through 1988. Highest mean water column chlorophyll concentration (Chlw,) is usually observed in nearshore areas adjacent to the mouths of the estuaries in the Middle Atlantic Bight (MAB), over the shallow water on Georges Bank, and a small area sampled along the southeast edge of Nantucket Shoals. Lowest Chlw «0.125 ug l-1) is usually restricted to the most seaward stations sampled along the shelf-break and the central deep waters in the Gulf of Maine. There is at least a twofold seasonal variation in phytoplankton biomass in all areas, with highest phytoplankton concentrations (m3) and highest integrated standing stocks (m2) occurring during the winter-spring (WS) bloom, and the lowest during summer, when vertical density stratification is maximal. In most regions, a secondary phytoplankton biomass pulse is evident during convective destratification in fall, usually in October. Fall bloom in some areas of Georges Bank approaches the magnitude of the WS-bloom, but Georges Bank and Middle Atlantic Bight fall blooms are clearly subordinate to WS-blooms. Measurements of chlorophyll in two size-fractions of the phytoplankton, netplankton (>20 um) and nanoplankton «20 um), revealed that the smaller nanoplankton are responsible for most of the phytoplankton biomass on the northeast U.S. shelf. Netplankton tend to be more abundant in nearshore areas of the MAB and shallow water on Georges Bank, where chlorophyll a is usually high; nanoplankton dominate deeper water at the shelf-break and deep water in the Gulf of Maine, where Chlw is usually low. As a general rule, the percent of phytoplankton in the netplankton size-fraction increases with increasing depth below surface and decreases proceeding offshore. There are distinct seasonal and regional patterns in the vertical distribution of chlorophyll a and percent netplankton, as revealed in composite vertical profiles of chlorophyll a constructed for 11 layers of the water column. Subsurface chlorophyll a maxima are ubiquitous during summer in stratified water. Chlorophyll a in the subsurface maximum layer is generally 2-8 times the concentration in the overlying and underlying water and approaches 50 to 75% of the levels observed in surface water during WS-bloom. The distribution of the ratio of the subsurface maximum chlorophyll a to surface chlorophyll a (SSR) during summer parallels the shelfwide pattern for stability, indexed as the difference in density (sigma-t) between 40 m and surface (stability 40. The weakest stability and lowest SSR's are found in shallow tidally-mixed water on Georges Bank; the greatest stability and highest SSR's (8-12:1) are along the mid and outer MAB shelf, over the winter residual water known as the "cold band." On Georges Bank, the distribution of SSR and the stability40 are roughly congruent with the pattern for maximum surface tidal current velocity, with values above 50 cms-1 defining SSR's less than 2:1 and the well-mixed area. Physical factors (bathymetry, vertical mixing by strong tidal currents, and seasonal and regional differences in the intensity and duration of vertical stratification) appear to explain much of the variability in phytoplankton chlorophyll a throughout this ecosystem. (PDF file contains 126 pages.)

Catacoustics

'Catacoustics' was an exhibition of sculptural assemblages and photographs that continues my exploration of self-portraiture and the sculptural object. The exhibition was presented as part of the 2015 MetroArts curated exhibition program (Curator: Amy-Clare McCarthy). The work specifically extends the formal vocabulary of my studio practice to incorporate a replica casting of the Ian Fairweather memorial rock at Bribie Island, Queensland. The resulting casts are combined with a series of heptagonal forms derived from the memorial plinth and other sundry components taken from previous exhibitions.,The final arrangement of this diverse field of elements are determined in part by their formal properties (e.g. their capacity to nest, prop, balance, support each other) frequently also taking the horizontal/vertical and the orientation of surrounding walls as formal cues. In so doing, the body of work acts as a manifestation of object-agency. Within this studio methodology, practice is theorised as a site for the interplay of non-human agents. The resulting exhibition thus acts a meditation on the ontology of art practice, conceived as a 'topology' - a fluid network of relationships forged largely by objects.

Avoimesti sitoutuneena : Lähetystyö kristillisessä kasvatuksessa ja vapaaehtoistyössä

In this study the junction of Christian mission, Christian education and voluntary work are examined in the Christian student voluntary association Opiskelijain Lähetysliitto (OL), which is the Finnish successor to the Student Volunteer Movement. The main subjects are the structure and content of the mission education as one aspect of Lutheran education and the reasons for expressing the mission interest through voluntary work. The research questions are as follows: What kind of organization has the OL been? What has mission education been like in the OL? Why have the former chairpersons participated in the OL? How have purposiveness and intentionality arisen among the former chairpersons? The study is empirical despite having a historical and retrospective view, since the OL is explored during the period 1972 2000. The data consists of the OL s annual reports, membership applications (N=629) and interviews of all 25 former chairmen. Data is analysed by qualitative and quantitative content analysis in a partly inductive and partly deductive manner. The pedagogical framework arises from situational learning theory (Lave - Wenger 1991), which was complemented with the criteria for meaningful learning (Jonassen 1995), the octagon model of volunteer motivation (Yeung 2004) and the definitions of intentionality and purposiveness in the theory of teachers pedagogical thinking (Kansanen et al. 2000). The analysis of the archive data showed that the activities of the OL are reminiscent of those of the missions of the Finnish Evangelical Lutheran Church congregations. The biggest difference was that all OL participants were young adults, the age group that is the greatest challenge to the Church. The OL is therefore an interesting context in which to explore mission education and mission interest. The key result of the study was the forming of a model of mission educa-tion. The model has three educational components: values, goals and methods. The gist of the model is formed by the goals. The main goal is the arousing and strengthening of mission interest which has emotional, cognitive and practical aspects. The subgoals create the horizontal vertical and inward outward dimensions of the model, which are the metalevels of mission education. The subgoals reveal that societal and religious education may embody a missionary dimension when they are understood as missionary training. Further, a distinction between mission education and missionary training was observed. The former emphasizes the main goal of the model and the latter underlines the subgoals. Based on the vertical dimension of the model the study suggests that the definition of religious competence needs to be complemented with missional competence. Reasons for participating in the OL were found to be diverse as noted in other studies on volunteering and motivating factors, and were typical to young people such as the importance of social relations. The study created new motivational themes that occurred in the middle of the continuity newness and the distance proximity dimensions, which were not found in Yeung s research. Mission interest as voluntary work appeared as oriented towards one s own spirituality or towards the social community. On the other hand, mission interest was manifested as intentional education in order to either improve the community or to promote the Christian mission. In the latter case the mission was seen as a purpose in life and as a future profession. Keywords: mission, Christian education, voluntary work, mission education, mission interest, stu-dent movement

Towed vehicles: undulating platforms as tools for maping coastal processes and water quality assessment, Seaside, California, February 5-7,2007. Workshop proceedings

The Alliance for Coastal Technologies (ACT) Workshop on Towed Vehicles: Undulating Platforms As Tools for Mapping Coastal Processes and Water Quality Assessment was convened February 5-7,2007 at The Embassy Suites Hotel, Seaside, California and sponsored by the ACT-Pacific Coast partnership at the Moss Landing Marine Laboratories (MLML). The TUV workshop was co-chaired by Richard Burt (Chelsea Technology Group) and Stewart Lamerdin (MLML Marine Operations). Invited participants were selected to provide a uniform representation of the academic researchers, private sector product developers, and existing and potential data product users from the resource management community to enable development of broad consensus opinions on the application of TUV platforms in coastal resource assessment and management. The workshop was organized to address recognized limitations of point-based monitoring programs, which, while providing valuable data, are incapable of describing the spatial heterogeneity and the extent of features distributed in the bulk solution. This is particularly true as surveys approach the coastal zone where tidal and estuarine influences result in spatially and temporally heterogeneous water masses and entrained biological components. Aerial or satellite based remote sensing can provide an assessment of the aerial extent of plumes and blooms, yet provide no information regarding the third dimension of these features. Towed vehicles offer a cost-effective solution to this problem by providing platforms, which can sample in the horizontal, vertical, and time-based domains. Towed undulating vehicles (henceforth TUVs) represent useful platforms for event-response characterization. This workshop reviewed the current status of towed vehicle technology focusing on limitations of depth, data telemetry, instrument power demands, and ship requirements in an attempt to identify means to incorporate such technology more routinely in monitoring and event-response programs. Specifically, the participants were charged to address the following: (1) Summarize the state of the art in TUV technologies; (2) Identify how TUV platforms are used and how they can assist coastal managers in fulfilling their regulatory and management responsibilities; (3) Identify barriers and challenges to the application of TUV technologies in management and research activities, and (4) Recommend a series of community actions to overcome identified barriers and challenges. A series of plenary presentation were provided to enhance subsequent breakout discussions by the participants. Dave Nelson (University of Rhode Island) provided extensive summaries and real-world assessment of the operational features of a variety of TUV platforms available in the UNOLs scientific fleet. Dr. Burke Hales (Oregon State University) described the modification of TUV to provide a novel sampling platform for high resolution mapping of chemical distributions in near real time. Dr. Sonia Batten (Sir Alister Hardy Foundation for Ocean Sciences) provided an overview on the deployment of specialized towed vehicles equipped with rugged continuous plankton recorders on ships of opportunity to obtain long-term, basin wide surveys of zooplankton community structure, enhancing our understanding of trends in secondary production in the upper ocean. [PDF contains 32 pages]

The temperature dependence of the development of the embryo in Mesocyclops leuckarti (Claus) and Cyclops scutifer

This work is mainly intended as an addition to the studies of the populations dynamics of Cyclops scutifer, which is part of the ”Latn ja jaure project” (a study of the principles involved in the ecosystem of a small -initially fish free- mountain lake, before and after the introduction of fish). The field work consisted of sampling in Lake Erken in Roslagen in June, July and September, as well as in Latn ja jaure in the Abisko mountains in August and September of 1965. Additional sampling was done in Latn ja jaure for the study of the horizontal, vertical and temporal distribution of Cyclops scutifer, as well as the in situ development of the different stages. These samples have been analysed in such a way as to fit into the frame work of future studies on the population dynamics of Cyclops scutifer, The main aim of the present investigation is the determination of the dependence upon tempera- tare of the development of the embryo in the subarctic Cyclops scutifer as compared with the conditions found in the warm water species Mesocyclops leuckarti.

Confiabilidade de diferentes métodos de aquisição de modelos dentários digitais

O uso de modelos de estudo dentários faz parte tanto da prática quanto da pesquisa odontológica e ortodôntica. Com a introdução dos scanners 3D e dos tomógrafos CBCT (cone beam computer tomography) tornou-se possível a obtenção de modelos dentários tridimensionais virtuais das arcadas dentárias. Foram selecionados 56 modelos dentários superiores e escaneados em três tipos diferentes de scanners: Maestro 3D Dental Scanner (AGE Solutions, Potedera, Italia), 3Shape R700 3D Scanner (3Shape, Copenhagen, Dinamarca) e o scanner 3Shape TRIOS (3Shape, Copenhagen, Dinamarca). Doze medidas foram realizadas nos modelos dentários de gesso e comparadas com as mesmas medidas realizadas nos modelos dentários digitais por meio do teste de Análise de Variância (ANOVA). Estatisticamente não foram encontradas diferenças significativas entre as medições tradicionais nos modelos dentários de gesso e as medidas realizadas nos modelos dentários digitais. Os três tipos de métodos de aquisição de modelos dentários digitais foram considerados confiáveis para as medições horizontais, transversais e verticais. Os modelos dentários virtuais podem ser indicados como substitutos dos modelos dentários de gesso.

Possible fish stock size assessment and available production survey as developed on Lake Kariba

This paper is an outline of methods practically useful for the evaluation of ichthyomass, fish abundance, available production and yield in lakes and rivers. Terms and concepts are reviewed, and difficulties stemming from the use of "predetermined" mathematical models are discussed. Sampling with toxicants in blocked-off areas was found to be the most practical method and is described in detail. For the total estimation of ichthyomass the spatial ranges of fish distribution must be determined; the results of echo-sounding surveys for horizontal, vertical, topographical, seasonal and diel fish distribution are given. Some of the most important methods for computing available production are listed and applied to Lake Kariba as an example. In particular, a method based on the balance between the main predator and prey species is reviewed. The ecological production survey concept is finally stressed as applied to multispecies fish stocks.

Shape Recognition of Linear Construction Entities from Construction Site Images

The capability to automatically identify shapes, objects and materials from the image content through direct and indirect methodologies has enabled the development of several civil engineering related applications that assist in the design, construction and maintenance of construction projects. This capability is a product of the technological breakthroughs in the area of Image Processing that has allowed for the development of a large number of digital imaging applications in all industries. In this paper, an automated and content based shape recognition model is presented. This model was devised to enhance the recognition capabilities of our existing material based image retrieval model. The shape recognition model is based on clustering techniques, and specifically those related with material and object segmentation. The model detects the borders of each previously detected material depicted in the image, examines its linearity (length/width ratio) and detects its orientation (horizontal/vertical). The results emonstrate the suitability of this model for construction site image retrieval purposes and reveal the capability of existing clustering technologies to accurately identify the shape of a wealth of materials from construction site images.

渤海湾盆地济阳坳陷东部走滑构造特征及其对油气成藏的影响研究

研究区位于郯庐断裂中段与济阳坳陷的构造结合部，区内走滑构造广泛发育，主要的走滑断裂有7条，分别是郯庐断裂带的东西两支、垦东断层、孤东断层、长堤断层、埕东断层和发育于垦东凸起中部的浅层走滑构造带。走滑构造带与油气富集带有着明显的对应关系。 通过对研究区内二维、三维地震测线和平面构造图的精细解释和分析，分别揭示了各走滑断裂在平面、剖面和三维空间上的构造形态。根据走滑断裂及其伴生构造的平面和剖面上的几何学特征，将研究区内的走滑断裂划分为三种类型：成熟型走滑断裂、隐伏型走滑断裂、不连续型的走滑断裂。 从理论模式研究入手，推导了拉分盆地中盆地的走滑速率与沉降速率之间的关系，证实了走滑速率同盆地的几何形状参数、最大沉降深度和盆地的沉降速率存在着稳定的数值关系。通过对莱州湾地区潍北凹陷基底沉降历史的分析，建立了潍北凹陷沉降速率与郯庐断裂中段走滑速率之间的经验关系式，进而求出郯庐断裂中段新生代右行走滑位移量的大小为40km。 运用2DMove软件，对研究区内四条典型剖面进行构造复原，计算出了各条剖面每个时期的伸展参数，对研究区构造活动强度进行了定量分析，揭示了研究区的构造演化规律。通过运用Ansys软件进行有限元模拟，恢复了晚白垩世晚期-古近纪早期研究区内的构造应力场和应变场，揭示了扭张作用是研究区内走滑断层开始走滑的主要原因。 通过上述分析，结合对究区内近几年勘探开发成功和失败的实例分析，全面探讨了走滑活动对于油气成藏“生”、“储”、“盖”、“圈”、“运”、“保”各因素的影响。

沾化凹陷火成岩油气藏形成条件和分布规律研究

As a kind of special lithologic ones, Igneous rock oil and gas pool is more and more paid attention, and it has different forming condition and distribution from conventional ones, such as various terrane distribution types, serious reservoir anisotropy, complicated hydrocarbon-bearing, so there is not successful experience to follow for exploration and development of this complex subtle oil and gas pool at present. For an example of Igneous oil and gas pool of Luo151 area in Zhanhua seg, Eastern China, this article study the difficult problem, including petrologic nd lithofacies analysis, Origin, invasion age and times of Igneous rock, reservoir anisotropy, Geological Modeling, Igneous reservoir synthesis evaluation. forming condition and distribution are studied synthetically, and an integrated method to predict igneous rock oil and gas pool is formed, which is evaluated by using development data. The Igneous rock is mainly diabase construction in Luo151 area of Zhanhua Sag, and petrologic types include carbonaceous slate, hornfels, and diabases. Based on analyzing synthetically petrologic component, texture and construct, 4 lithofacies zones, such as carbonaceous slate subfacies, hornfels subfacies containing cordierite and grammite, border subfacies and central subfacies, are divided in the diabase and wall rock. By studying on isotopic chronology, terrane configuration and imaging logging data, the diabase intrusion in Zhanhua Sag is formed by tholeiite magma emplacing in Shahejie formation stratum on the rift tension background Lower Tertiary in North China. The diabase intrusion of Luo151 is composed possibly of three periods magma emplacement. There is serious anisotropy in the diabase reservoirs of Luo151 in Zhanhua Sag. Fracture is primary reservoir space, which dominated by tensile fracture in high obliquity, and the fracture zones are mainly developed round joint belt of igneous rock and wall rock and position of terrane thickness changing rapidly. The generation materials of the reservoirs in Luo151 igneous oil pools consist of Intergranular micropore hornfels, condensate blowhole-solution void diabase condensate edge, the edge and center of the condensate seam diabase, of which are divided into horizontal, vertical and reticulated cracks according fracture occurrence. Based on the above research, a conceptual model of igneous rock reservoir is generated, which is vertically divided into 4 belts and horizontally 3 areas. It is built for the first time that classification evaluation pattern of igneous rock reservoir in this area, and 3 key wells are evaluated. The diabase construction is divided into grammite hornfels micropore type and diabase porous-fracture type reservoirs. The heavy mudstone layers in Third Member of Shahejie formation (Es3) provide favorable hydrocarbon source rock and cap formation, diabase and hornfels belts serve as reservoirs, faults and microcracks in the wall rocks as type pathways for oil and gas migration. The time of diabase invasion was about in the later deposition period of Dongying Formation and the middle of that of Guantao Formation, the oil generated from oil source rock of Es3 in the period of the Minghuazhen formation and is earlier more than the period of diabase oil trap and porous space forming. Based on geological and seismic data, the horizon of igneous rocks is demarcated accurately by using VSP and synthetic seismogram, and the shape distribution and continuity of igneous rocks are determined by using cross-hole seismic technology. The reservoir capability is predicted by using logging constraining inversion and neural network technology. An integrated method to predict igneous rock oil and gas pool is formed. The study is appraised by using development data. The result show the reservoir conceptual model can guide the exploration and development of oil pool, and the integrated method yielded marked results in the production.

Appearance of the frequency-doubling stimulus at threshold.

PURPOSE. It has been argued that the threshold for detecting frequency-doubling (FD) technology perimeter stimuli differs from the threshold for perceiving spatial structure (pattern) in the same targets. Thresholds for perceiving spatial structure have typically been assessed using orientation-identification experiments. The authors investigated the influence of orientation, edge profile, and psychophysical method on the origin of the reported differences in detection and orientation-identification thresholds for FD gratings.

METHODS. Detection and orientation-identification thresholds were determined in 12 observers with the use of FD stimuli (0.25 cyc/deg, 25 Hz) presented centrally and at 15° eccentricity. Edge profile (square- and Gaussian-windowed) and orientation (horizontal, vertical, and oblique) were independently modified. Detection thresholds were also measured for spatially uniform flickering targets (25 Hz). Orientation-identification thresholds using a two-alternative forced choice (2-AFC) and a two-interval forced choice (2-IFC) method were also compared in five experienced observers.

RESULTS. Orientation-identification and detection thresholds did not significantly differ under any condition tested. Orientation-identification thresholds obtained with 2-AFC were not significantly different from those obtained with 2-IFC. Thresholds for spatially uniform flicker were significantly lower than for FD stimuli.

CONCLUSIONS. The authors found that orientation-identification and detection thresholds for FD gratings did not differ and argue that recent findings to the contrary arise from the inappropriate use of spatially uniform flicker targets as alternatives in 2-IFC experiments.

Comportamiento de la red de arrastre de fondo tipo 450/120 empleada en el estudio de recursos demersales a inicios del invierno 1998. BIC José Olaya Balandra 9806-07 de Puerto Pizarro a Huarmey

Se determinaron correlaciones entre diferentes parámetros de funcionamiento de la red de arrastre empleadas para las calas de comprobación. Abertura vertical con Abertura horizontal, profundidad con longitud de cable, abertura vertical y abertura horizontal versus velocidad de arrastre, analizándose un total de 72 lances de comprobación. Los datos de comportamiento de la red como la abertura horizontal y abertura vertical de la boca de la red, profundidad de la red y distancia entre la relinga inferior al fondo, etc. se obtuvo en forma directa por medio del sistema SCANMAR RX 400, los arrastres tuvieron una duración promedio de 13,58 minutos con una velocidad de arrastre promedio de 3,8 nudos. Se aplicó el modelo de regresión lineal para la correlación entre los valores de: (a) abertura vertical y abertura horizontal, (b) longitud del cable de arrastre principal con la profundidad de arrastre, (c) abertura horizontal-vertical y la velocidad de arrastre.

L'horizon et la colonne, réflexions sur la relation intérieur-extérieur chez Le Corbusier

Ce mémoire explore la question du rapport intérieur-extérieur chez Le Corbusier se questionnant sur la façon dont la notion d’interpénétration spatiale, postulat majeur de l’architecture moderne, est présente dans son discours. À travers l’étude des croquis, photos et notes de son Voyage d’Orient, ainsi que de certains principes architecturaux énoncés dans ses ouvrages théoriques emblématiques des années 1920, nous allons saisir chez Le Corbusier une pensée qui transcende l’idée d’objet architectural et révèle un intérêt spécial porté au site et à la dialectique horizontale-verticale. Certains dispositifs ou éléments architecturaux, tels que la colonnade et la colonne, vont se révéler aux yeux du maître, lorsqu’ils se trouvent dans des espaces de transition entre l’intérieur et l’extérieur, porteurs d’une fonction médiatrice entre l’homme et son milieu, et ce sera par le biais d’un outil de mesure : l’angle droit. Cette recherche entend contribuer à la compréhension de la pensée architecturale de Le Corbusier, notamment en ce qui concerne la relation architecture-paysage en tant qu’expérience phénoménale.

A calibrated, non-invasive method for measuring the internal interface height field at high resolution in the rotating, two-layer annulus

We describe a remote sensing method for measuring the internal interface height field in a rotating, two-layer annulus laboratory experiment. The method is non-invasive, avoiding the possibility of an interaction between the flow and the measurement device. The height fields retrieved are accurate and highly resolved in both space and time. The technique is based on a flow visualization method developed by previous workers, and relies upon the optical rotation properties of the working liquids. The previous methods returned only qualitative interface maps, however. In the present study, a technique is developed for deriving quantitative maps by calibrating height against the colour fields registered by a camera which views the flow from above. We use a layer-wise torque balance analysis to determine the equilibrium interface height field analytically, in order to derive the calibration curves. With the current system, viewing an annulus of outer radius 125 mm and depth 250 mm from a distance of 2 m, the inferred height fields have horizontal, vertical and temporal resolutions of up to 0.2 mm, 1 mm and 0.04 s, respectively.

A conceptual framework of e-fraud control in an integrated supply chain

The integration of supply chains offers many benefits; yet, it may also render organisations more vulnerable to electronic fraud (e-fraud). E-fraud can drain on organisations’ financial resources, and can have a significant adverse effect on the ability to achieve their strategic objectives. Therefore, efraud control should be part of corporate board-level due diligence, and should be integrated into organisations’ practices and business plans.
Management is responsible for taking into consideration the relevant cultural, strategic and implementation elements that inter-relate with each other and to coordinating the human, technological and financial resources necessary to designing and implementing policies and procedures for controlling e-fraud. Due to the characteristics of integrated supply chains, a move from the traditional vertical approach to a systemic, horizontal-vertical approach is necessary. Although the e-fraud risk cannot be eliminated, risk mitigation policies and processes tailored to an organisation’s particular vulnerabilities can significantly reduce the risk and may even preclude certain classes of frauds.
In this paper, a conceptual framework of e-fraud control in an integrated supply chain is proposed. The proposed conceptual framework can help managers and practitioners better understand the issues and plan the activities involved in a systemic, horizontal-vertical approach to e-fraud control in an integrated supply chain, and can be a basis upon which empirical studies can be build.