Estudos epidemiológicos e controle químico de Phakopsora euvitis

Em janeiro de 2003 foram constatados sintomas típicos de ferrugem em folhas maduras de videira (Vitis vinifera), nas áreas experimentais da Universidade Estadual Paulista, Campus de Ilha Solteira, em Selvíria - MS e Ilha Solteira - SP. Este é o primeiro relato desta doença da videira no Centro-Oeste do Brasil. Considerando a intensidade da doença, a importância da cultura da videira na região e a falta de informações sobre a ferrugem, os objetivos deste trabalho foram: reconfirmar a patogenicidade de Phakopsora euvitis; estudar a influência da luz e da temperatura na germinação de urediniósporos; estudar o efeito do tipo de superfície na germinação de urediniósporos; determinar a longevidade in vivo de urediniósporos e avaliar a eficiência agronômica de fungicidas para o controle da ferrugem. Sintomas da ferrugem foram verificados somente em folhas maduras de videira. A temperatura de 25 ºC, no escuro, e a superfície inferior da folha de videira foram as melhores condições para a germinação de urediniósporos de P. euvitis. A germinação dos urediniósporos foi reduzida em 94%, em folhas de videira que foram retiradas das plantas e mantidas durante sete dias na superfície do solo. em dois experimentos realizados em campo constatou-se que os fungicidas tebuconazole, propiconazole e azoxystrobin proporcionaram as menores intensidades da doença. Tebuconazole apresentou-se como o fungicida mais eficiente no controle da ferrugem. No geral, maior intensidade da ferrugem foi observada em videira conduzida no sistema de espaldeira.

Robustness of speckle imaging techniques applied to horizontal imaging scenarios

Atmospheric turbulence near the ground severely limits the quality of imagery acquired over long horizontal paths. In defense, surveillance, and border security applications, there is interest in deploying man-portable, embedded systems incorporating image reconstruction methods to compensate turbulence effects. While many image reconstruction methods have been proposed, their suitability for use in man-portable embedded systems is uncertain. To be effective, these systems must operate over significant variations in turbulence conditions while subject to other variations due to operation by novice users. Systems that meet these requirements and are otherwise designed to be immune to the factors that cause variation in performance are considered robust. In addition robustness in design, the portable nature of these systems implies a preference for systems with a minimum level of computational complexity. Speckle imaging methods have recently been proposed as being well suited for use in man-portable horizontal imagers. In this work, the robustness of speckle imaging methods is established by identifying a subset of design parameters that provide immunity to the expected variations in operating conditions while minimizing the computation time necessary for image recovery. Design parameters are selected by parametric evaluation of system performance as factors external to the system are varied. The precise control necessary for such an evaluation is made possible using image sets of turbulence degraded imagery developed using a novel technique for simulating anisoplanatic image formation over long horizontal paths. System performance is statistically evaluated over multiple reconstruction using the Mean Squared Error (MSE) to evaluate reconstruction quality. In addition to more general design parameters, the relative performance the bispectrum and the Knox-Thompson phase recovery methods is also compared. As an outcome of this work it can be concluded that speckle-imaging techniques are robust to the variation in turbulence conditions and user controlled parameters expected when operating during the day over long horizontal paths. Speckle imaging systems that incorporate 15 or more image frames and 4 estimates of the object phase per reconstruction provide up to 45% reduction in MSE and 68% reduction in the deviation. In addition, Knox-Thompson phase recover method is shown to produce images in half the time required by the bispectrum. The quality of images reconstructed using Knox-Thompson and bispectrum methods are also found to be nearly identical. Finally, it is shown that certain blind image quality metrics can be used in place of the MSE to evaluate quality in field scenarios. Using blind metrics rather depending on user estimates allows for reconstruction quality that differs from the minimum MSE by as little as 1%, significantly reducing the deviation in performance due to user action.

Impacto de la prestación de servicios de salud bajo el modelo de red en el municipio de Sogamoso

El presente estudio es de tipo analítico, cohorte retrospectiva, tiene como objeto estudiar un modelo de prestación de servicios de salud bajo el concepto de red integrada, conformada por las clínicas privadas de segundo y tercer nivel de complejidad del municipio de Sogamoso (Boyacá). Se analizó el período comprendido entre los años 2012 a 2014, donde se puede evidenciar la implementación y puesta en marcha del modelo. En el mes de agosto del año 2012, la estrategia de asociatividad la adelantaron las tres instituciones de manera libre y autónoma, utilizando como guía la metodología propuesta por la Cepal en el año 2010; las diferencias entre esta metodología y el modelo utilizado se deben a las particularidades de las clínicas y del contexto en el que se desarrolló. Este modelo de atención surgió de la necesidad de prestar los servicios de salud ofertados por las clínicas, acorde con su capacidad instalada, al total de la población de la Nueva EPS en Sogamoso, que en ese momento coyuntural no se estaba cumpliendo en el municipio, y ninguna de las instituciones tenía la infraestructura individual para atender a toda su población. El resultado de la asociación de las tres clínicas se logró gracias a un grado de confianza previo entre los directivos de las instituciones y posterior a varias reuniones, en las que se tomó la determinación de trabajar con el modelo de Unión Temporal, ya que no son una persona jurídica diferente a las que la conforman Se demuestra el impacto de este modelo asociativo de cada una de las organizaciones que la componen evaluando cuatro ámbitos como la capacidad de aprendizaje, capacidad de gestión estratégica, economía de escala y poder de negociación y externalidades. Para la recolección de la información se utilizaron las bases de datos de las instituciones hospitalarias con la información de los indicadores de oportunidad, así como el incremento de la facturación y del recaudo antes y después de la formación de la Unión Temporal; adicionalmente se realizaron encuestas a los directores de las clínicas como fuente de información para desarrollo de nuevos productos, reducción de costos, ampliación de la oferta hospitalaria, establecimientos de alianza, puesta en marcha de servicios comunes y apertura de nuevos mercados. Sumado a lo anterior, se realizó una encuesta adicional a los usuarios del nuevo producto desarrollado. Como resultado de este estudio se encuentra beneficio en todos los ámbitos evaluados para las instituciones que interactúan bajo este modelo y se espera que obtengan los mismos beneficios que los demás actores participantes en él, como las EAPB, los cuales no hacen parte del presente estudio. En Colombia no se observa la existencia de un modelo similar en sistema de salud, a pesar del leve intento de la Ley 1438 del 2011 por iniciar la conformación de redes; por esta razón se puede decir que este estudio marca un derrotero para que las organizaciones de salud tengan un modelo de articulación ante la falta de desarrollos de esquemas de red y por tratarse de un modelo con ausencia de reglamentación.

Rod length influence in torque measurement of SPT-T test

Since Ranzini suggested supplementing the SPT test with measurement of the torque required to turn the split spoon sampler after driving, many Brazilian engineers have been using this in the design of pile foundations. This paper presents a study of the rod length influence in the torque measurement. A theoretical study of material resistance considering torsion and bending in a thin wall tubular steel shaft was performed. It makes possible to conclude that the shearing tension caused by the proper weight represents less than 1% of the shearing tension caused by the turning moment. In addition, an experimental study was done with electric torquemeters fixed in a horizontal rod system. The tests were being carried out to analyze rods of one meter to twenty meters in length and the measurements were collected at the ends of each rod length verifying the efficiency data. As a result, it is possible to verify that the torque difference through rod length is lower than minimum scales of mechanical torquemeters that are used on practical engineering. Also a fact to be considered is a big torque loss for values under 20 N.m of applied torque. This way, the SPT-T is not adequate to low consistency soil. Copyright ASCE 2007.

Theoretical and experimental evaluation of the influence of the length of drill rods in the SPT-T test

The influence of soil drill rod length on the N value in the SPT-T test has been studied extensively by Mello (1971), Schmertmann & Palacios (1979), Odebrecht et al. (2002) and Cavalcante (2002). This paper presents an analysis of the Standard Penetration Test supplemented with torque measurement (SPT-T). A theoretical study of the resistance of the rod material to torsion and bending indicated that the shear stress caused by the rod self-weight represents less than 1% of that caused by the torsional moment. An experimental study with electric torquemeters attached to a horizontal rod system, as well as two field tests in the vertical direction, were also carried out to compare and substantiate the results. The purpose of these tests was to analyze changes along the length of the rod in response to successive increments at 1-meter intervals. Torque measurements were taken at each increment of the length to ascertain the accuracy of the theoretical data. The difference between the applied torque and the measured torque at the end of rod system was lower than the minimum scale of mechanical torquemeters used in practice.

Anomalias eletromagnéticas de corpos tubulares inclinados em contato com o manto de intemperismo usando diferentes arranjos de bobinas-modelamento analógico

A principal aplicação dos métodos eletromagnéticos é a prospecção de sulfetos maciços que pela própria natureza geológica são corpos longos e delgados, encrustados em rocha encaixante resistiva, permitindo a interpretação através de curvas de modelos reduzidos usando semi-planos em meio resistivo (ar-livre). No entanto, com a extensão do uso dos métodos eletromagnéticos em regiões que tem um manto de intemperismo de parcialmente condutivo a condutivo, como na região Amazônica e nas regiões semi-áridas ou de climas tropicais , esta técnica de interpretação tem levado a resultados bem diferentes da situação real. O objetivo deste trabalho é estudar a influência do manto de intemperismo em contato ôhmico com o corpo-alvo, utilizando os arranjos de bobinas horizontal coplanar (HCP), vertical coplanar (VCP), vertical coaxial (VCA) e mínimo (PERP), através do modelagem analógico. Para simular o corpo foram utilizadas placas de grafite, cujas dimensões satisfazem a condição de semi-plano. Para simular o manto foi usada uma solução de cloreto de amônia. De forma geral, os resultados obtidos com os diversos arranjos apresentaram as mesmas características, ressalvada as diferenças peculiares de cada arranjo. De forma resumida tem-se as seguintes alterações na anomalia atribuídas à um manto condutivo em contato ôhmico com o corpo-alvo: i) Há rotação de fase, que inicialmente é em sentido anti-horário, mas mais adiante, com o aumento do número de indução do manto , torna-se horária; ii) Alteração na forma padrão do perfil de quadratura devido ao surgimento do pico extra no lado a favor do mergulho; iii) Só há uniformidade de comportamento para o pico-a-pico contra da quadratura, que cresce com o aumento número de indução do manto. Maiores anomalias são obtidas com o sistema horizontal coplanar e as menores com o vertical coplanar. Neste estudo não foi observado formação de pico extra nas anomalias do arranjo vertical coplanar. Ainda, os efeitos de cobertura são mais acentuados no sistema horizontal coplanar comparados aos sistemas de bobina vertical e em anomalias de semi-planos menos inclinados e em menor profundidade.

Estudo de anomalias eletromagnéticas de um condutor tabular vertical sob camadas parcialmente condutiva em multifrequência e multiseparação através de modelamento analógico

A resposta eletromagnética (EM) de um corpo condutivo envolvido por uma zona parcialmente condutiva, torna-se bastante diferente daquela de um corpo condutivo em um meio altamente resistivo. As zonas parcialmente condutivas, como por exemplo, rocha encaixante, halo de sulfetos disseminados ou manto de intemperismo, que envolvem o corpo condutivo, afetam a resposta EM de diferentes maneiras, dependendo de suas características físicas e geométricas e, em particular, do sistema de prospecção EM utilizado. Neste trabalho em modelamento analógico, foi feita uma análise de anomalias EM provocadas por corpos condutivos tabulares verticais sob manto de intemperismo, em levantamentos terrestres para diferentes sistemas de bobinas - horizontal coplanar, vertical coplanar e vertical coaxial - em oito frequências na faixa de 250 Hz a 35 kHz e separações entre as bobinas de 0,15; 0,20 e 0,25m. O manto de intemperismo foi simulado por folhas de aço finas dispostas horizontalmente e o corpo condutor principal por folhas de alumínio finas colocadas verticalmente. As dimensões das folhas foram determinadas de acordo com as condições de modelamento para o plano e o semi-plano. Foram utilizados três corpos e três mantos com diferentes espessuras e condutividades, simulando, deste modo, diversas situações geológicas. Os resultados mostraram que cada sistema de bobinas é afetado diferentemente pela presença do manto de intemperismo. Para a análise dos resultados foi plotado um conjunto de diagramas considerando os valores pico-a-pico das anomalias em fase e em quadratura. Um outro conjunto de diagramas mostra as amplitudes máximas em fase, que ocorrem quando a componente em quadratura se anula em uma frequência relativamente baixa para um conjunto de corpo-manto, e as amplitudes máximas em quadratura, que ocorrem quando a resposta em fase atinge um mínimo próximo de zero, em frequências relativamente altas. Com isto foi possível conhecer a faixa de frequências para cada sistema de bobinas, onde a resposta EM se encontra o mínimo afetada pela presença do manto de intemperismo. A maior amplitude na resposta é obtida no sistema horizontal coplanar e a menor no sistema vertical coplanar. Um aumento na separação entre as bobinas é acompanhado por um deslocamento da anomalia para baixas frequências. A faixa de frequências, onde a presença do manto tem pouca influência na resposta do corpo condutivo, e maior para o sistema vertical coaxial e menor para o sistema horizontal coplanar. Esses resultados dão uma luz para o conhecimento da posição e da largura da banda de frequências utilizável, assim como as melhores separações entre transmissor-receptor, para auxiliar no planejamento de sistemas de prospecção EM, de modo que a resposta fique o mais livre possível de sinais indesejáveis, tais como os causados pela presença do manto de intemperismo.

Neuronale Netzwerke des Zentralkomplexes und ein räumliches Arbeitsgedächtnis von Drosophila melanogaster

Zielgerichtete Orientierung ermöglicht es Lebewesen, überlebenswichtige Aufgaben, wie die Suche nach Ressourcen, Fortpflanzungspartnern und sicheren Plätzen zu bewältigen. Dafür ist es essentiell, die Umgebung sensorisch wahrzunehmen, frühere Erfahrungen zu speichern und wiederabzurufen und diese Informationen zu integrieren und in motorische Aktionen umzusetzen.rnWelche Neuronengruppen vermitteln zielgerichtete Orientierung im Gehirn einer Fliege? Welche sensorischen Informationen sind in einem gegebenen Kontext relevant und wie werden diese Informationen sowie gespeichertes Vorwissen in motorische Aktionen übersetzt? Wo findet im Gehirn der Übergang von der sensorischen Verarbeitung zur motorischen Kontrolle statt? rnDer Zentralkomplex, ein Verbund von vier Neuropilen des Zentralhirns von Drosophila melanogaster, fungiert als Übergang zwischen in den optischen Loben vorverarbeiteten visuellen Informationen und prämotorischem Ausgang. Die Neuropile sind die Protocerebralbrücke, der Fächerförmige Körper, der Ellipsoidkörper und die Noduli. rnIn der vorliegenden Arbeit konnte gezeigt werden, dass Fruchtfliegen ein räumliches Arbeitsgedächtnis besitzen. Dieses Gedächtnis kann aktuelle visuelle Information ersetzen, wenn die Sicht auf das Zielobjekt verloren geht. Dies erfordert die sensorische Wahrnehmung von Zielobjekten, die Speicherung der Position, die kontinuierliche Integration von Eigen-und Objektposition, sowie die Umsetzung der sensorischen Information in zielgerichtete Bewegung. Durch konditionale Expression von Tetanus Toxin mittels des GAL4/UAS/GAL80ts Systems konnte gezeigt werden, dass die Ringneurone, welche in den Ellipsoidkörper projizieren, für das Orientierungsgedächtnis notwendig sind. Außerdem konnte gezeigt werden, dass Fliegen, denen die ribosomale Serinkinase S6KII fehlt, die Richtung verlieren, sobald keine Objekte mehr sichtbar sind und, dass die partielle Rettung dieser Kinase ausschließlich in den Ringneuronenklassen R3 und R4d hinreichend ist, um das Gedächtnis wieder herzustellen. Bei dieser Gedächtnisleistung scheint es sich um eine idiothetische Form der Orientierung zu handeln. rn Während das räumliche Arbeitsgedächtnis nach Verschwinden von Objekten relevant ist, wurde in der vorliegende Arbeit auch die Vermittlung zielgerichteter Bewegung auf sichtbare Objekte untersucht. Dabei wurde die zentrale Frage bearbeitet, welche Neuronengruppen visuelle Orientierung vermitteln. Anhand von Gehirnstrukturmutanten konnte gezeigt werden, dass eine intakte Protocerebralbrücke notwendig ist, um Laufgeschwindigkeit, Laufaktivität und Zielgenauigkeit bei der Ansteuerung visueller Stimuli korrekt zu vermitteln. Dabei scheint das Horizontale Fasersystem, welches von der Protocerebralbrücke über den Fächerförmigen Körper auf den Zentralkomplex assoziierte Neuropile, die Ventralkörper, projiziert, notwendig für die lokomotorische Kontrolle und die zielgenaue Bewegung zu sein. Letzeres konnte zum einen durch Blockade der synaptischen Transmission anhand konditionaler Tetanus Toxin Expression mittels des GAL4/UAS/GAL80ts Systems im Horizontalen Fasersystem gezeigt werden;. zum anderen auch durch partielle Rettung der in den Strukturmutanten betroffenen Gene. rn Den aktuellen Ergebnissen und früheren Studien folgend, ergibt sich dabei ein Modell, wie zielgerichtete Bewegung auf visuelle Stimuli neuronal vermittelt werden könnte. Nach diesem Modell bildet die Protocerebralbrücke die Azimuthpositionen von Objekten ab und das Horizontale Fasersystem vermittelt die entsprechende lokomotorische Wo-Information für zielgerichtete Bewegungen. Die Eigenposition in Relation zum Zielobjekt wird über die Ringneurone und den Ellipsoidkörper vermittelt. Wenn das Objekt aus der Sicht verschwindet, kann die Relativposition ideothetisch ermittelt werden und integriert werden mit Vorinformation über das Zielobjekt, die im Fächerförmigen Körper abgelegt ist (Was-Information). Die resultierenden Informationen könnten dann über das Horizontale Fasersystem in den Ventralkörpern auf absteigende Neurone gelangen und in den Thorax zu den motorischen Zentren weitergeleitet werden.rn

Trade-off study on deorbiting S/C in near polar orbit

Usual long, flexible, ED tethers kept vertical by the gravity gradient might be less efficient for deorbiting S/C in near-polar orbits than conventional (Hall, Ion) electrical thrusters. A trade-off study on this application is here presented for tethers kept horizontal and perpendicular to the orbital plane. A tether thus oriented must be rigid and short for structural reasons, requiring a non-convex cross section and a power supply as in the case of electrical thrusters. Very recent developments on bare-tether collection theory allow predicting the current collected by an arbitrary cross section. For the horizontal tether, structural considerations on length play the role of ohmic effects in vertical tethers, in determining the optimal contribution of tether mass to the overall deorbiting system. For a given deorbiting-mission impulse, tether-system mass is minimal at some optimal length that increases weakly with the impulse. The horizontal-tether system may beat both the vertical tether and the electrical thruster as regards mass requirements for a narrow length range centered at about 100 m, allowing, however, for a broad mission-impulse range.

A 20 m spatial resolution seamless multisource Digital Elevation/Depth Model for Lizard Island, northern Great Barrier Reef

Hydrographers have traditionally referred to the nearshore area as the "white ribbon" area due to the challenges associated with the collection of elevation data in this highly dynamic transitional zone between terrestrial and marine environments. Accordingly, available information in this zone is typically characterised by a range of datasets from disparate sources. In this paper we propose a framework to 'fill' the white ribbon area of a coral reef system by integrating multiple elevation and bathymetric datasets acquired by a suite of remote-sensing technologies into a seamless digital elevation model (DEM). A range of datasets are integrated, including field-collected GPS elevation points, terrestrial and bathymetric LiDAR, single and multibeam bathymetry, nautical chart depths and empirically derived bathymetry estimations from optical remote sensing imagery. The proposed framework ranks data reliability internally, thereby avoiding the requirements to quantify absolute error and results in a high resolution, seamless product. Nested within this approach is an effective spatially explicit technique for improving the accuracy of bathymetry estimates derived empirically from optical satellite imagery through modelling the spatial structure of residuals. The approach was applied to data collected on and around Lizard Island in northern Australia. Collectively, the framework holds promise for filling the white ribbon zone in coastal areas characterised by similar data availability scenarios. The seamless DEM is referenced to the horizontal coordinate system MGA Zone 55 - GDA 1994, mean sea level (MSL) vertical datum and has a spatial resolution of 20 m.

As Operações de Transformação Fundiária Resultantes do Loteamento e o (seu) Registo

O presente trabalho corresponde ao Trabalho de Projeto Avançado do Mestrado em Solicitadoria, na área do Registo Predial, apresentado na Escola Superior de Tecnologia e Gestão de Felgueiras, conducente à obtenção do grau de Mestre. Tem como objeto o registo das operações de transformação fundiária resultantes de loteamento. No primeiro capítulo, começamos por abordar, de uma forma geral, a necessidade de lotear e a sua relação com o registo. Tratamos da noção de loteamento, referimos a sua evolução de uma forma breve e desenvolvemos quais as formas de titulação no âmbito do loteamento. Referimos o regime da propriedade horizontal como alternativa ao licenciamento. Para finalizar, e como não podia deixar de ser, explicamos os efeitos reais e registais, bem como as suas implicações jurídicas. No segundo capítulo, centramo-nos nas condições especiais dos loteamentos, nomeadamente as cedências, os negócios jurídicos e a prestação de caução. No que respeita às cedências, fazemos a distinção entre as cedências para o domínio privado ou domínio publico e caracterizamos os inerentes negócios jurídicos, conforme os casos. Analisamos a prestação de caução como garantia de execução das obras de urbanização, fazendo referência ao seu montante. No terceiro capítulo, tratamos da validade e eficácia dos atos, começando pela cassação do título, em que consiste e quando é que a ela há lugar. Tratamos, também, a caducidade, declaração de nulidade e anulação. Quanto à caducidade, identificamos os diferentes tipos e em que momento pode ocorrer. No que respeita à declaração de nulidade, falamos de seu regime, quando é que estamos perante um ato nulo e quais os seus efeitos. Por fim e no que concerne à anulação, caracterizamos a anulabilidade dos atos de controlo prévio das operações urbanísticas. Desenvolvemos, também, o embargo, especificamos em que situações o mesmo se determina, qual o procedimento a adotar e quais os seus efeitos. No quarto e último capítulo, abordamos as operações de transformação fundiária isentas de licença, nomeadamente o destaque, referindo qual a sua natureza jurídica, bem como as suas implicações registais e as outras operações de transformação fundiária isentas de licença. O método usado assenta na análise das questões estudadas, com recurso a autores, doutrina e jurisprudência pertinentes nesta matéria.

Influence of leaf removal on berry thermal efficiency for anthocyanin accumulation

The aim of this work was to analyse the effects of leaf removal on Touriga Nacional berry temperature and consequent thermal efficiency for anthocyanins biosynthesis. The field experiment was located at Dão Wine Research Station, Nelas, Portugal in an adult vineyard planted with North-South oriented rows, with the red grape variety Touriga Nacional grafted on 110R rootstock. The vines were trained on a vertical shoot positioning, spur-pruned on a bilateral Royat cordon system and deficit irrigated (50% ETc). The experimental design was a randomized complete block design with four replications of twelve vines per elemental plot, and the following two treatments: basal leaf removal (LR) and a control non-defoliated (ND). Berry temperature (Tb) was measured continuously during the second half (3rd to 19th September) of the 2009 ripening period using two-junction, fine-wires copper-constantan thermocouples manually inserted into the berries and connected to a data logger. A sample of clusters located in different canopy positions (exposed and internal; facing East and West) of 4 vines per treatment were used. To quantify the effect of Tb on anthocyanins biosynthesis, the berry hourly mean temperatures were converted into normal heat hours (NHH) and accumulated per day (NHHd) and per monitoring period (NHHc). For quantification of thermal requirements for anthocyanins synthesis and accumulation, a minimum of 10°C, a maximum of 35°C, and an optimum of 26°C were used. Meteorological variables were measured at an automatic weather station installed within the experimental plot. For all days of the monitoring period, daily average berry temperature (dTb) of all monitored berries was lower in ND treatment than in LR, being the maximum differences between treatments registered on 11th September. The highest dTb differences between treatments were registered on the clusters located at the west side of the canopy on 7th September while dTb of the clusters located in the centre of the canopy was less affected by leaf removal. The control non-defoliated treatment (ND) presented a significantly higher NHHc than that of LR being the higher differences presented by the clusters located in the west side. The lowest differences in NHHc were obtained in the clusters located in the centre of the canopy. Our results show that the thermal efficiency for berry anthocyanins accumulation was significantly affected by leaf removal and that this effect was dependent of the meteorological conditions, time of the day and berry/cluster location into the vine canopy.

Experimental investigation on lateral impact response of concrete-filled double-skin tube columns using horizontal-impact-testing system

This paper presents an experimental investigation on the lateral impact performance of axially loaded concrete-filled double-skin tube (CFDST) columns. These columns have desirable structural and constructional properties and have been used as columns in building, legs of off shore platforms and as bridge piers. Since they could be vulnerable to impact from passing vessels or vehicles, it is necessary to understand their behaviour under lateral impact loads. With this in mind, an experimental method employing an innovative instrumented horizontal impact testing system (HITS) was developed to apply lateral impact loads whilst the column maintained a static axial pre-loading to examine the failure mechanism and key response parameters of the column. These included the time histories of impact force, reaction forces, global lateral deflection and permanent local buckling profile. Eight full scale columns were tested for key parameters including the axial load level and impact location. Based on the test data, the failure mode, peak impact force, impact duration, peak reaction forces, reaction force duration, column maximum and residual global deflections and column local buckling length, depth and width under varying conditions are analysed and discussed. It is evident that the innovative HITS can successfully test structural columns under the combination of axial pre-loading and impact loading. The findings on the lateral impact response of the CFDST columns can serve as a benchmark reference for their future analysis and design.

Application of Electrical Resistance Tomography System to Monitor Gas/Liquid Two-Phase Flow in a Horizontal Pipe

The Electrical Resistance Tomography (ERT) technique possesses great potential in monitoring widely exiting industrial two/multi-phase flow. For vertical pipe flow and inclined pipe flow, some application studies with exciting results have been reported, but there is rarely a paper regarding the application of ERT to horizontal gas/liquid pipe flow. This paper addresses this issue and proposes a smart method, Liquid Level Detection method, to conventional ERT system. The enhanced ERT system using the new method can monitor horizontal pipe flow effectively and its application is no longer restricted by the flow conditions. Some experimental results from monitoring an air/water slug pipe flow are presented.

The oculomotor system: (1) Vertical-horizontal interaction and signal recognition, (2) Time delays and power spectra

In the first section of this thesis, two-dimensional properties of the human eye movement control system were studied. The vertical - horizontal interaction was investigated by using a two-dimensional target motion consisting of a sinusoid in one of the directions vertical or horizontal, and low-pass filtered Gaussian random motion of variable bandwidth (and hence information content) in the orthogonal direction. It was found that the random motion reduced the efficiency of the sinusoidal tracking. However, the sinusoidal tracking was only slightly dependent on the bandwidth of the random motion. Thus the system should be thought of as consisting of two independent channels with a small amount of mutual cross-talk.

These target motions were then rotated to discover whether or not the system is capable of recognizing the two-component nature of the target motion. That is, the sinusoid was presented along an oblique line (neither vertical nor horizontal) with the random motion orthogonal to it. The system did not simply track the vertical and horizontal components of motion, but rotated its frame of reference so that its two tracking channels coincided with the directions of the two target motion components. This recognition occurred even when the two orthogonal motions were both random, but with different bandwidths.

In the second section, time delays, prediction and power spectra were examined. Time delays were calculated in response to various periodic signals, various bandwidths of narrow-band Gaussian random motions and sinusoids. It was demonstrated that prediction occurred only when the target motion was periodic, and only if the harmonic content was such that the signal was sufficiently narrow-band. It appears as if general periodic motions are split into predictive and non-predictive components.

For unpredictable motions, the relationship between the time delay and the average speed of the retinal image was linear. Based on this I proposed a model explaining the time delays for both random and periodic motions. My experiments did not prove that the system is sampled data, or that it is continuous. However, the model can be interpreted as representative of a sample data system whose sample interval is a function of the target motion.

It was shown that increasing the bandwidth of the low-pass filtered Gaussian random motion resulted in an increase of the eye movement bandwidth. Some properties of the eyeball-muscle dynamics and the extraocular muscle "active state tension" were derived.