Investigations on Longline Fishing in Lakshadweep Sea with special reference to Bycatch Issues Bait and Hook Selectivity

The main objectives of the present study have been studies on the operational performance of tuna longline in Lakshadweep Sea studies on the efficiency of hooks in the longline operation studies on the efficiency of baits in the longline operation studies on bycatch in longline operation studies on predation on the longline catch and the hook loss encountered during the fishing operation

Hook selectivity of the pacu Piaractus mesopotamicus (Holmberg, 1887) in the Pantanal, the state of Mato Grosso do Sul, Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Quantifying the roles of competing static gears: comparative selectivity of longlines and monofilament gill nets in a multi-species fishery of the Algarve (southern Portugal)

Fishing trials with monofilament gill nets and longlines using small hooks were carried out in Algarve waters (southern Portugal) over a one-year period. Four hook sizes of "Mustad" brand, round bent, flatted sea hooks (Quality 2316 DT, numbers 15, 13, 12 and 11) and four mesh sizes of 25, 30, 35 and 40 mm (bar length) monofilament gill nets were used. Commercially valuable sea breams dominated the longline catches while small pelagics were relatively more important in the gill nets. Significant differences in the catch size frequency distributions of the two gears were found for all the most important species caught by both gears (Boops boops, Diplodus bellottii, Diplodus vulgaris, Pagellus acarne, Pagellus erythrinus, Spondyiosoma cantharus, Scomber japonicus and Scorpaena notata), with longlines catching larger fish and a wider size range than nets. Whereas longline catch size frequency distributions for most species for the different hook sizes were generally highly overlapped, suggesting little or no differences in size selectivity, gill net catch size frequency distributions clearly showed size selection. A variety of models were fitted to the gill net and hook data using the SELECT method, while the parameters of the logistic model were estimated by maximum likelihood for the longline data. The bi-normal model gave the best fits for most of the species caught with gill nets, while the logistic model adequately described hook selectivity. The results of this study show that the two static gears compete for many of the same species and have different impacts in terms of catch composition and size selectivity. This information will I;e useful for the improved management of these small-scale fisheries in which many different gears compete for scarce resources.

Species and size selectivity in a 'red' sea bream longline 'metier' in the Algarve (southern Portugal)

A longline 'metier' using small hooks for 'red' sea breams (Pagellus acarne and Pagellus erythrinus) in the Algarve (south of Portugal) was studied. Experimental longlining was carried out with three sizes of "Mustad" round bend, flatted, spade end Quality 2316 DT hooks (numbers 11, 13 and 15) and two types of bait: razor shell (Ensis siliqua) and mud shrimp (Upogebia pusilla). A total of 3 328 fish and at least 36 species were caught with 33 600 hooks fished in 28 longline sets. Five species of sea breams (Sparidae) accounted for 79% of the catch: Pagellus acarne, Pagellus erythrinus, Diplodus vulgaris, Spondyliosoma cantharus, and Boops boops. High catch rates of 20-30 fish per 100 hooks were made in a number of 1 200 hook longline sets, with total catch weights of 40 to more than 60 kg per set. In general, the smallest hook (number 15) had the highest catch rate. Bait type did not significantly affect the catch size distributions. Although more fish were caught with the razor shell bait, higher catch rates of 'red' sea breams were obtained with mud shrimp. Catch rates were also affected by the location of the fishing grounds and the time of the set, with the highest catch rates obtained when the longline was set within two hours before sunrise. A wide size range was caught for each species, with highly overlapped catch size frequency distributions for the three hook sizes used. Except for Spondyliosoma cantharus, few illegal-sized fish were caught, even with the smallest hook. The logistic model fitted by maximum likelihood was used to describe hook selectivity for Diplodus vulgaris, Pagellus acarne, Pagellus erythrinus, and Spondyliosoma cantharus. (C) Ifremer-Elsevier, Paris.

The hake deepwater semi-pelagic ("pedra-bola") longline fishery in the Algarve (southern Portugal)

A 2-year study of the European hake (Merluccius merluccius) semi-pelagic ("pedra-bola) longline fishery was carried out in the Algarve (southern Portugal). This fishery takes place on the continental slope at 200-700 m depths. using monofilament longlines that are lifted off the bottom at regular intervals by glass balls. Hook selectivity trials were carried out with four hook sizes (SIAPAL brand numbers 10, 9, 7 and 5) from March to August 1997 and May to August 1998. At least 32 species of fish and invertebrates were caught, with hake dominating the catch (41 and 45% of the catch in numbers), followed by Galeus melastomus (23 and 19%), Micromesistius poutassou (10 and 7%), Benthodesmus elongatus (8 and 5%), Etmopterus pusillus (6 and 9%) and Scyliorhinus canicula (5 and 4%). Apart from the hake, and some species of commercial value such as G. melastomus (only the large individuals), Ray's bream (Brama brama, 1.4 and 4%), silver scabbard fish (Lepidopus caudatus. 1 and 2.5%), swordfish (Xiphins gladius, <1%), wreckfish (Polyprion americanus, <1%). conger eel (Conger conger. <1%), and bluemouth rockfish (Helicolenus dactylopterus, <1%)- most of the other species are discarded, used as bait in traps or consumed by the fishermen. Catch rates (number of fish per 100 hooks) for hake and for all species combined decreased significantly with hook size. Hake catch size frequency distributions for the different hook sizes in 1997 and 1998 were highly overlapped, with the four different hooks catching a wide range of sizes. Although catch size frequency distributions for the different sized hooks were not significantly different in 1997, hake caught in 1998 were characterised by smaller sizes and size ranges. (C) 2001 Elsevier Science B.V. All rights reserved.

Comparative fixed gear studies in the Cyclades (Aegean Sea): size selectivity of small-hook longlines and monofilament gill nets

Fishing trials with monofilament gill nets and longlines using small hooks were carried out at the same fishing grounds in Cyclades (Aegean Sea) over 1 year. Four sizes of MUSTAD brand, round bent, flatted sea hooks (Quality 2316 DT, numbers 15, 13, 12 and 11) and four mesh sizes of 22, 24, 26 and 28 turn nominal bar length monofilament gill nets were used. Significant differences in the catch size frequency distributions of the two gears were found for four out of five of the most important species caught by both the gears (Diplodus annularis, Diplodus vulgaris, Pagellus erythrinus, Scorpaena porcus and Serranus cabrilla), with longlines catching larger fish and a wider size range than gill nets. Whereas longline catch size frequency distributions for most species for the different hook sizes were generally highly overlapped, suggesting little or no differences in size selectivity, gill net catch size frequency distributions clearly showed size selection, with larger mesh sizes catching larger fish. A variety of models were fitted to the gill net data, with the lognormal providing the best fit in most cases. A maximum likelihood method was also used to estimate the parameters of the logistic model for the longline data. Because of the highly overlapped longline catch size frequency distributions parameters could only be estimated for two species. This study shows that the two static gears have different impacts in terms of size selection. This information will be useful for the more effective management of these small-scale, multi-species and multi-gear fisheries. (C) 2002 Elsevier Science B.V. All rights reserved.

A comparison of monofilament gillnet and small hook longline selectivity in a multispecies artisanal fishery in the Algarve, Southern Portugal

As part of ongoing studies concerned with the small-scale fisheries of the South of Portugal, experimental fishing was carried out with monofilament gillnets and small hook longlines within the same area. Sixty-two species were caught, of which 20 were common to both gears. Pronounced differences in terms of the relative importance of different species in the catches were observed. Size selection patterns also differed, with highly overlapped hook catch distributions and few species showing evidence for size selectivity. In contrast, strong selectivity was characteristic of species which tend to be "wedged" in gillnets. Whereas smaller stretched mesh sizes (particularly 40 and 50 mm) caught significant numbers of illegal sized fish, this was minimal in the longlines. Some implications for management are discussed.

Semi-pelagic longline selectivity for two demersal species from the Azores: the black spot sea bream (Pagellus bogaraveo) and the bluemouth rockfish (Helicolenus dactylopterus dactylopterus)

The selectivity of four hook sizes (STELL brand(1), Quality 2335, numbers 12, 9, 6 and 4) used in a semi-pelagic longline fishery was studied in the Azores. Two species were caught in sufficient numbers for modelling of selectivity: the black spot sea bream (Pagellus bogaraveo) and the bluemouth rockfish (Helicolenus dactylopterus dactylopterus). A maximum likelihood method was used to fit a versatile model which can be used to describe a wide range of selectivity curves; from bell-shaped to asymptotic. Significant differences in size selectivity between hooks were found for both species. In the case of Pagellus bogaraveo, the smallest hook (number 12) had the lowest catch rates and all hooks were characterised by logistic-type selectivity curves, with sizes at 50% selectivity of: 27.9, 30.4, and 32.8 cm for hooks numbers 12, 9 and 6, respectively. The number 9 hook was the most efficient for Helicolenus d. dactylopterus, with selectivity curves varying from strongly skewed to the right for the number 12 hook to logistic-type for the numbers 6 and 4 hooks. Sizes at 50% selectivity for this species were 16.8, 18.7, 20.7, and 22.0 cm. respectively. (C) 1999 Elsevier Science B.V. All rights reserved.

Species and size selectivity in a Portuguese multispecies artisanal long-line fishery

The species and size selectivity of long-lines using small hooks were studied off the south coast of Portugal using ''Mustad'' brand round bent, flatted sea hooks (Quality 2316 DT) numbers 15, 13, and 11 baited with razor shell clam (Ei-isis siliqua). Hook numbers 13 and 11 are 49 and 109% larger respectively than number 15 hooks in terms of overall size (maximum width x maximum length). A total of 39 900 hooks were fished in 45 sets and 35 species of fish and cephalopods were caught. As a group, 13 species of sea breams (Sparidae) dominated the catch by numbers (58%) and weight (73%). Six species of sea breams, along with the greater weever fish (Trachinus draco) accounted for 81% of the total catch by weight, with the common or white sea bream (Diplodus sargus) bring the most important (29%). Catch size distributions by hook size were, in general, highly overlapped for all species and hook size had little apparent effect on minimum size at capture. All hooks caught a wide range of sizes per species, but the catch rate (number of fish per 100 hooks) was significantly lower for the largest hook. Except for the black sea bream (Spondyliosoma cantharus), capture of illegally sized or immature fish was minimal. Small increases in average size with hook size were evident for four species: Diplodus sargus, D. vulgaris, Lithognathus mormyrus and Serranus cabrilla. No differences in size selectivity were detected for Boops boops, D. annularis, Spondyliosoma cantharus and Trachinus draco. A skew-normal model adequately described differences in size selectivity in five of six species. (C) 1996 International Council for the Exploration of the Sea

Catch composition, catch rates and size selectivity of three long-line methods in the Algarve (southern Portugal)

Three long-line methods have been studied in the Algarve: 1) small-hook long-line for inshore (less than 30 m) ‘white’ sea breams (Sparidae); 2) small-hook long-line for deeper water (40-60 m) ‘red’ sea breams; and 3) deep water (500-700 m) semi-pelagic long-line for hake Merluccius merluccius (Linnaeus, 1758). Selectivity studies were carried out with three hook sizes in the first two cases: Mustad round-bent Quality 2369 hooks, numbers 15, 13, and 11, baited with a standardsized razor-shell Ensis siliqua (Linnaeus, 1758). Four hook sizes (numbers 10, 9, 7, and 5) of Stell round-bent, eyed hooks were used in the semi-pelagic long-line selectivity study, baited with a half of a standard-sized sardine. Some factors affecting catch composition and catch rates of the small hook long-lines were also evaluated: bait, gangion length, setting time, fishing ground, and depth. Species diversity was relatively high, with 40, 36 and 27 species, respectively, in the three studies. However, the catches were dominated by a limited number of species. Catch rates (number of fish per 100 hooks) were variable (< 5 %; > 20 %), with a general decrease in catch rate with increasing hook size in all the studies. In general, the catch size distributions for the different hook sizes for each species were highly overlapping, with little or no evidence of differences in size selectivity. Hooks caught a wide size-range for each species, with few or no illegal-sized fish, in most cases. Some implications of these results for the management of multi-species, multi-gear fisheries are discussed.

Selectivity in reduction of natural furanoheliangolides with Stryker's reagent

Reduction of the natural sesquiterpene lactones furanoheliangolides with Stryker's reagent is an effective process for producing eremantholides through a biomimetic pathway. Other reduction products are also formed. Oxygenated functions at C-15 of the furanoheliangolide produce an increase in the velocities of the reactions and reduce the chemoselectivity of the reagent.

Structural basis of GC-1 selectivity for thyroid hormone receptor isoforms

Background: Thyroid receptors, TRa and TR beta, are involved in important physiological functions such as metabolism, cholesterol level and heart activities. Whereas metabolism increase and cholesterol level lowering could be achieved by TR beta isoform activation, TRa activation affects heart rates. Therefore, beta-selective thyromimetics have been developed as promising drug-candidates for treatment of obesity and elevated cholesterol level. GC-1 [ 3,5-dimethyl-4-(4'-hydroxy- 3'-isopropylbenzyl)-phenoxy acetic acid] has ability to lower LDL cholesterol with 600-to 1400-fold more potency and approximately two-to threefold more efficacy than atorvastatin (Lipitor(C)) in studies in rats, mice and monkeys. Results: To investigate GC-1 specificity, we solved crystal structures and performed molecular dynamics simulations of both isoforms complexed with GC-1. Crystal structures reveal that, in TRa Arg228 is observed in multiple conformations, an effect triggered by the differences in the interactions between GC-1 and Ser277 or the corresponding asparagine (Asn331) of TR beta. The corresponding Arg282 of TR beta is observed in only one single stable conformation, interacting effectively with the ligand. Molecular dynamics support this model: our simulations show that the multiple conformations can be observed for the Arg228 in TR alpha, in which the ligand interacts either strongly with the ligand or with the Ser277 residue. In contrast, a single stable Arg282 conformation is observed for TR beta, in which it strongly interacts with both GC-1 and the Asn331. Conclusion: Our analysis suggests that the key factors for GC-1 selectivity are the presence of an oxyacetic acid ester oxygen and the absence of the amino group relative to T(3). These results shed light into the beta-selectivity of GC-1 and may assist the development of new compounds with potential as drug candidates to the treatment of hypercholesterolemia and obesity.

Surface tension of flotation solution and its influence on the selectivity of the separation between apatite and gangue minerals

This work presents and discusses the influence of the surface tension (gamma(LV)) of methanol/water mixtures on the flotation response of apatite versus gangue minerals conditioned with flotation reagents (75 g/t cornstarch and 100 g/t Berol 867) at pH 10.6. Berol 867 is a collector composed of sodium alkyl sarcosinate plus nonionic surfactant. The highest Schulz efficiency of separation (recovery of apatite minus recovery of gangue) was achieved at approximate to 51.0 mN/m. The critical surface tension of wettability (gamma(C)) of apatite was found to occur at 34.7 mN/m when determined by means of gamma flotation experiments, , and it was 33.9 mN/m when determined by Zisman`s approach.

Tree-ring characterization of Araucaria columnaris Hook and its applicability as a lead indicator in environmental monitoring

Tree-rings have frequently been used for dating of trees and to determine annual growth increments and forest dynamics, but little is known in tropical conditions about their utilization for environmental monitoring. This paper presents the results of Araucaria columnaris tree-ring characterization by wood anatomy and X-ray densitometric analysis and the determination of Pb concentration. Core samples from twelve araucaria trees were extracted from two sites exposed to air pollution due to intense traffic of vehicles and industrial activities. The tree-rings distinctly presented radial variation in early-latewood thickness and density, and characteristics of juvenile and mature wood. Anatomical and X-ray densitometric analysis were useful to delimit the tree-ring boundaries and to date the tree-rings, as well as to prove the annual formation. The lead concentration in annual araucaria tree-rings, analyzed with graphite furnace atomic absorption spectrometry, indicated the seasonal presence of the heavy metal in the environment during the 30 years studied, although the Pb did not affect tree growth. (c) 2008 Elsevier GmbH. All rights reserved.

High selectivity microporous silica membranes for lactic acid dehydration

Lactic acid (LA) has significant market potential for many industries including food, cosmetics, pharmaceuticals, medical and biodegradable materials. Production of LA usually begins with the fermentation of glucose but subsequent stages for the enrichment of lactic acid are complex and energy intensive and could be minimised using water selective membrane technology. In this work, we trialled a highly selective hydrostable carbonised template molecular sieve silica (CTMSS) membrane for the dehydration of a 15 vol% aqueous lactic acid solution with 0.1 vol% glucose. CTMSS membrane films were developed by dip-coating ceramic substrates with silica sols made using the acid catalysed sol-gel process. Permeation was performed by feeding LA/glucose solution to the membrane cell at 18°C in a standard pervaporation setup. The membrane showed selective transport of water from the aqueous feed to the permeate while glucose was not detected. CTMSS membrane permeate flux stabilised at 0.2 kg.m-2.hr-1 in 3.9 hours, and reduced LA to lower than 0.2 vol%. Flux through the CTMSS micropores was activated, displaying increased initial flux to 1.58 kg.m-2.hr-1 at 60°C. To enrich a 1 l.min-1 stream to 85% LA in a single stage, a minimum membrane area of 324 m2 would be required at 18°C. Increased operating temperature to 80°C significantly reduced this area to 24 m2 but LA levels in the permeate stream increased to 0.5 vol%. The highly selective CTMSS membrane technology is an ideal candidate for LA purification. CTMSS membrane systems operate stably in aqueous systems leading to potential cost reductions in LA processing for future markets.