Extending haptic device capability for 3D virtual grasping

This paper presents an investigation into the workspace constraints observed through the use of multiple single point haptic interfaces, which lead to the design of a novel grasping device that improves upon current commercial haptic interfaces. The presented device is desktop based, and has been designed to maximise the haptic workspace while offering the ability to grasp and manipulate virtual objects, which is a function that current commercial interfaces are limited in providing. The performance of the commercial haptic interface in producing sustained effective operation and increased workspace with the attached haptic gripper is evaluated, and the improvement of both has been determined.

Enabling multi-point haptic grasping in virtual environments

Haptic interaction has received increasing research interest in recent years. Currently, most commercially available haptic devices provide the user with a single point of interaction. Multi-point haptic devices present a logical progression in device design and enable the operator to experience a far wider range of haptic interactions, particularly the ability to grasp via multiple fingers. This is highly desirable for various haptically enabled applications including virtual training, telesurgery and telemanipulation. This paper presents a gripper attachment which utilises two low-cost commercially available haptic devices to facilitate multi-point haptic grasping. It provides the ability to render forces to the user's fingers independently and using Phantom Omni haptic devices offers several benefits over more complex approaches such as low-cost, reliability, and ease of programming. The workspace of the gripper attachment is considered and in order to haptically render the desired forces to the user's fingers, kinematic analysis is discussed and necessary formulations presented. The integrated multi-point haptic platform is presented and exploration of a virtual environment using CHAI 3D is demonstrated.

A multi-point haptic platform for grasping and manipulating virtual objects

This work presents a multi-point haptic platform that employs two Phantom Omni haptic devices. A gripper attachment connects to both devices and enables multi-point haptic grasping in virtual environments. In contrast to more complex approaches, this setup benefits from low-cost, reliability, and ease of programming while being capable of independently rendering forces to each of the user’s fingertips. The ability to grasp with multiple points potentially lends itself to applications such as virtual training, telesurgery and telemanipulation.

Reconfigurable multipurpose haptic interface

This paper presents a low-cost haptic interface providing four different kinematic configurations. The different configurations are achieved using two Phantom Omni haptic devices combined with a series of clip-on attachments. Aside from the flexibility to easily reconfigure the interface, three of the four configurations provide functionality which is either not readily available or is cost prohibitive for many applications.

Multipoint haptic guidance for micrograsping systems

The ability to perform accurate micromanipulation offers wide-reaching benefits and is of increasing interest to researchers. Recent research into microgripper, microtweezer, and microforcep systems contributes toward accurate micrograsping and manipulation. Despite these efforts, achieving adequate operator control remains a distinct research challenge. Haptic interfaces interact with the human's haptic modality and offer the ability to enhance the operator's controllability of micromanipulation systems. Our previous work introduced single-point haptic guidance to assist the operator during intracellular microinjection. This paper extends the approach to propose multipoint haptic guidance for micrograsping tasks. Accurate micrograsping is valuable in many applications, including microassembly and biomanipulation. A multipoint haptic gripper facilitates haptic interaction, and haptic guidance assists the operator in controlling systems suitable for micrograsping. Force fields are used to guide the operator to suitable grasp points on micrometer-sized objects and consist of attractive and repulsive forces. The ability of the force field to effectively assist the operator in grasping the cell is evaluated using a virtual environment. Evaluation results demonstrate the ability of the approach to significantly reduce participants' average grasping error.

Grasping virtual objects with multi-point haptics

The majority of commercially available haptic devices offer a single point of haptic interaction. These devices are limited when it is desirable to grasp with multiple fingers in applications including virtual training, telesurgery and telemanipulation. Multipoint haptic devices serve to facilitate a greater range of interactions. This paper presents a gripper attachment to enable multi-point haptic grasping in virtual environments. The approach employs two Phantom Omni haptic devices to independently render forces to the user's thumb and other fingers. Compared with more complex approaches to multi-point haptics, this approach provides a number of advantages including low-cost, reliability and ease of programming. The ability of the integrated multi-point haptic platform to interact within a CHAI 3D virtual environment is also presented.

Force-controlled automatic microassembly of tissue engineering scaffolds

This paper presents an automated system for 3D assembly of tissue engineering (TE) scaffolds made from biocompatible microscopic building blocks with relatively large fabrication error. It focuses on the pin-into-hole force control developed for this demanding microassembly task. A beam-like gripper with integrated force sensing at a 3 mN resolution with a 500 mN measuring range is designed, and is used to implement an admittance force-controlled insertion using commercial precision stages. Visual-based alignment followed by an insertion is complemented by a haptic exploration strategy using force and position information. The system demonstrates fully automated construction of TE scaffolds with 50 microparts whose dimension error is larger than 5%.

A Novel Approach to Haptic Tele-operation of Aerial Robot Vehicles

We present a novel, simple and effective approach for tele-operation of aerial robotic vehicles with haptic feedback. Such feedback provides the remote pilot with an intuitive feel of the robot’s state and perceived local environment that will ensure simple and safe operation in cluttered 3D environments common in inspection and surveillance tasks. Our approach is based on energetic considerations and uses the concepts of network theory and port-Hamiltonian systems. We provide a general framework for addressing problems such as mapping the limited stroke of a ‘master’ joystick to the infinite stroke of a ‘slave’ vehicle, while preserving passivity of the closed-loop system in the face of potential time delays in communications links and limited sensor data

Grounding action in visuo-haptic space using experience networks

Traditional approaches to the use of machine learning algorithms do not provide a method to learn multiple tasks in one-shot on an embodied robot. It is proposed that grounding actions within the sensory space leads to the development of action-state relationships which can be re-used despite a change in task. A novel approach called an Experience Network is developed and assessed on a real-world robot required to perform three separate tasks. After grounded representations were developed in the initial task, only minimal further learning was required to perform the second and third task.

Multisensory integration weightings underlying haptic feedback laparoscopic surgery

"This letter aims to highlight the multisensory integration weighting mechanisms that may account for the results in studies investigating haptic feedback in laparoscopic surgery. The current lack of multisensory theoretical knowledge in laparoscopy is evident, and “a much better understanding of how multimodal displays in virtual environments influence human performance is required” ...publisher website

Attunement to haptic information helps skilled performers select implements for striking a ball in cricket

This study examined the perceptual attunement of relatively skilled individuals to physical properties of striking implements in the sport of cricket. We also sought to assess whether utilising bats of different physical properties influenced performance of a specific striking action: the front foot straight drive. Eleven, skilled male cricketers (mean age = 16.6 ± 0.3 years) from an elite school cricket development programme consented to participate in the study. Whist blindfolded, participants wielded six bats exhibiting different mass and moment of inertia (MOI) characteristics and were asked to identify their three most preferred bats for hitting a ball to a maximum distance by performing a front foot straight drive (a common shot in cricket). Next, participants actually attempted to hit balls projected from a ball machine using each of the six bat configurations to enable kinematic analysis of front foot straight drive performance with each implement. Results revealed that, on first choice, the two bats with the smallest mass and MOI values (1 and 2) were most preferred by almost two-thirds (63.7%) of the participants. Kinematic analysis of movement patterns revealed that bat velocity, step length and bat-ball contact position measures significantly differed between bats. Data revealed how skilled youth cricketers were attuned to the different bat characteristics and harnessed movement system degeneracy to perform this complex interceptive action.

Gestural, emergent and expressive : three research themes for haptic interaction

Drawing on three case studies of work in the fields of participatory design, interaction design and electronic arts, we reflect on the implications of these studies for haptic interface research. We propose three themes: gestural; emergent; and expressive; as signposts for a program of research into haptic interaction that could point the way towards novel approaches to haptic interaction and move us from optic to haptic ways of seeing.

Intercontinental haptic teleoperation of a flying vehicle : a step towards real-time applications

This paper describes the theory and practice for a stable haptic teleoperation of a flying vehicle. It extends passivity-based control framework for haptic teleoperation of aerial vehicles in the longest intercontinental setting that presents great challenges. The practicality of the control architecture has been shown in maneuvering and obstacle-avoidance tasks over the internet with the presence of significant time-varying delays and packet losses. Experimental results are presented for teleoperation of a slave quadrotor in Australia from a master station in the Netherlands. The results show that the remote operator is able to safely maneuver the flying vehicle through a structure using haptic feedback of the state of the slave and the perceived obstacles.

Intrinsic frames of reference in haptic spatial learning

It has been proposed that spatial reference frames with which object locations are specified in memory are intrinsic to a to-be-remembered spatial layout (intrinsic reference theory). Although this theory has been supported by accumulating evidence, it has only been collected from paradigms in which the entire spatial layout was simultaneously visible to observers. The present study was designed to examine the generality of the theory by investigating whether the geometric structure of a spatial layout (bilateral symmetry) influences selection of spatial reference frames when object locations are sequentially learned through haptic exploration. In two experiments, participants learned the spatial layout solely by touch and performed judgments of relative direction among objects using their spatial memories. Results indicated that the geometric structure can provide a spatial cue for establishing reference frames as long as it is accentuated by explicit instructions (Experiment 1) or alignment with an egocentric orientation (Experiment 2). These results are entirely consistent with those from previous studies in which spatial information was encoded through simultaneous viewing of all object locations, suggesting that the intrinsic reference theory is not specific to a type of spatial memory acquired by the particular learning method but instead generalizes to spatial memories learned through a variety of encoding conditions. In particular, the present findings suggest that spatial memories that follow the intrinsic reference theory function equivalently regardless of the modality in which spatial information is encoded.

Extending visual perception with haptic exploration for improved scene understanding

Scene understanding has been investigated from a mainly visual information point of view. Recently depth has been provided an extra wealth of information, allowing more geometric knowledge to fuse into scene understanding. Yet to form a holistic view, especially in robotic applications, one can create even more data by interacting with the world. In fact humans, when growing up, seem to heavily investigate the world around them by haptic exploration. We show an application of haptic exploration on a humanoid robot in cooperation with a learning method for object segmentation. The actions performed consecutively improve the segmentation of objects in the scene.