Did Impending War in Europe Help Destroy the Gold Bloc in 1936? An Internal Inconsistency Hypothesis

This paper investigates the gold bloc operated between France, the Netherlands, Switzerland and Belgium, especially over the period after the USA left the gold standard in March 1933 to its end in September 1936. It enquires into the effect of military-political developments in Germany and Italy on the sustainability of the gold bloc between its members. Juxtaposed is the view of leading political scientists, such as Henry Kissinger, who see impending war in Europe as deeply and adversely affecting psychology in Europe, and what may be called the standard "economists' view" that sees the demise of the gold bloc as being caused almost exclusively by economic factors. Developing concepts of external and internal inconsistency of the gold bloc, this investigation concludes that both economic and military-political developments played important roles in destroying the last vestiges of the gold standard.

Caractérisation pharmacocinétique et pharmacodynamique de la lidocaïne avec ou sans adrénaline lors d’un bloc paravertébral du plexus brachial chez le chien

Au cours des vingt dernières années, l’anesthésie régionale est devenue, autant en médecine vétérinaire qu’humaine, un outil essentiel à l’élaboration de protocoles analgésiques péri-opératoires. Parmi l’éventail de techniques mises au point en anesthésie canine, le bloc paravertébral du plexus vertébral (PBPB) et sa version modifiée sont d’un grand intérêt pour toute procédure du membre thoracique, dans sa portion proximale. Toutefois, l’essentiel des données publiées à ce jour provient d’études colorimétriques, sans évaluation clinique, et peu d’information est disponible sur les techniques de localisation nerveuse envisageables à ce site. Notre étude visait à décrire une approche échoguidée du PBPB modifié, puis à caractériser ses paramètres pharmacocinétiques et pharmacodynamiques après administration de lidocaïne (LI) ou lidocaïne adrénalinée (LA). Huit chiens ont été inclus dans un protocole prospectif, randomisé, en aveugle et croisé, réparti sur trois périodes. L’impact pharmacodynamique du bloc effectué avec LI ou LA a été évalué régulièrement pour 180 min suivant son exécution. Le traitement à l’adrénaline n’a pas démontré d’impact significatif (P = 0,845) sur la durée du bloc sensitif, tel qu’évalué par un stimulus douloureux mécanique appliqué aux dermatomes ciblés. À l’opposé, l’atteinte proprioceptive évaluée par la démarche a été trouvée prolongée (P = 0,027) et le bloc moteur mesuré par le pic de force verticale (PVF) au trot sur la plaque de force s’est avéré plus marqué (PVF réduit; P = 0,007) sous LA. À l’arrêt comme au trot, le nadir de la courbe PVF-temps a été trouvé retardé (P < 0,005) et la pente ascendante de retour aux valeurs normales adoucie (P = 0,005). Parallèlement aux évaluations cliniques, des échantillons plasmatiques ont été collectés régulièrement afin de quantifier et décrire le devenir pharmacocinétique de la lidocaïne. Parmi les trois élaborés, un modèle bi-compartimental doté d’une double absorption asynchrone d’ordre zéro a finalement été sélectionné et appliqué aux données expérimentales. Sous LA, la Cmax a été trouvée significativement diminuée (P < 0,001), les phases d’absorption prolongées [P < 0,020 (Dur1) et P < 0,001 (Dur2)] et leurs constantes réduites [P = 0,046(k01) et P < 0,001 (k02)], le tout en concordance avec les effets proprioceptifs et moteurs rapportés. Bien que l’extrapolation du dosage soit maintenant théoriquement envisageable à partir du modèle mis en lumière ici, des études supplémentaires sont encore nécessaires afin d’établir un protocole de PBPB d’intérêt clinique. L’analyse sur plaque de force pourrait alors devenir un outil de choix pour évaluer l’efficacité du bloc dans un cadre expérimental.

Caractérisation pharmacocinétique et pharmacodynamique de la lidocaïne avec ou sans adrénaline lors d’un bloc paravertébral du plexus brachial chez le chien

Au cours des vingt dernières années, l’anesthésie régionale est devenue, autant en médecine vétérinaire qu’humaine, un outil essentiel à l’élaboration de protocoles analgésiques péri-opératoires. Parmi l’éventail de techniques mises au point en anesthésie canine, le bloc paravertébral du plexus vertébral (PBPB) et sa version modifiée sont d’un grand intérêt pour toute procédure du membre thoracique, dans sa portion proximale. Toutefois, l’essentiel des données publiées à ce jour provient d’études colorimétriques, sans évaluation clinique, et peu d’information est disponible sur les techniques de localisation nerveuse envisageables à ce site. Notre étude visait à décrire une approche échoguidée du PBPB modifié, puis à caractériser ses paramètres pharmacocinétiques et pharmacodynamiques après administration de lidocaïne (LI) ou lidocaïne adrénalinée (LA). Huit chiens ont été inclus dans un protocole prospectif, randomisé, en aveugle et croisé, réparti sur trois périodes. L’impact pharmacodynamique du bloc effectué avec LI ou LA a été évalué régulièrement pour 180 min suivant son exécution. Le traitement à l’adrénaline n’a pas démontré d’impact significatif (P = 0,845) sur la durée du bloc sensitif, tel qu’évalué par un stimulus douloureux mécanique appliqué aux dermatomes ciblés. À l’opposé, l’atteinte proprioceptive évaluée par la démarche a été trouvée prolongée (P = 0,027) et le bloc moteur mesuré par le pic de force verticale (PVF) au trot sur la plaque de force s’est avéré plus marqué (PVF réduit; P = 0,007) sous LA. À l’arrêt comme au trot, le nadir de la courbe PVF-temps a été trouvé retardé (P < 0,005) et la pente ascendante de retour aux valeurs normales adoucie (P = 0,005). Parallèlement aux évaluations cliniques, des échantillons plasmatiques ont été collectés régulièrement afin de quantifier et décrire le devenir pharmacocinétique de la lidocaïne. Parmi les trois élaborés, un modèle bi-compartimental doté d’une double absorption asynchrone d’ordre zéro a finalement été sélectionné et appliqué aux données expérimentales. Sous LA, la Cmax a été trouvée significativement diminuée (P < 0,001), les phases d’absorption prolongées [P < 0,020 (Dur1) et P < 0,001 (Dur2)] et leurs constantes réduites [P = 0,046(k01) et P < 0,001 (k02)], le tout en concordance avec les effets proprioceptifs et moteurs rapportés. Bien que l’extrapolation du dosage soit maintenant théoriquement envisageable à partir du modèle mis en lumière ici, des études supplémentaires sont encore nécessaires afin d’établir un protocole de PBPB d’intérêt clinique. L’analyse sur plaque de force pourrait alors devenir un outil de choix pour évaluer l’efficacité du bloc dans un cadre expérimental.

Photoluminescence enhancement by gold nanoparticles in Eu(3+) doped GeO(2)-Bi(2)O(3) glasses

We report large photoluminescence (PL) enhancement in Eu(3+)-doped GeO(2)-Bi(2)O(3) glasses containing gold nanoparticles (NPs). Growth of approximate to 1000% in the PL intensity corresponding to the Eu(3+) transition (5)D(0)->(7)F(2), at 614 nm, was observed in comparison with a reference sample that does not contain gold NPs. Other PL bands from 580 to 700 nm are also enhanced. The enhancement of the PL intensity is attributed to the increased local field in the Eu(3+) locations due to the presence of the NPs and the energy transfer from the excited NPs to the Eu(3+) ions.

Structure of disordered gold-polymer thin films using small angle x-ray scattering

We have investigated the structure of disordered gold-polymer thin films using small angle x-ray scattering and compared the results with the predictions of a theoretical model based on two approaches-a structure form factor approach and the generalized Porod law. The films are formed of polymer-embedded gold nanoclusters and were fabricated by very low energy gold ion implantation into polymethylmethacrylate (PMMA). The composite films span (with dose variation) the transition from electrically insulating to electrically conducting regimes, a range of interest fundamentally and technologically. We find excellent agreement with theory and show that the PMMA-Au films have monodispersive or polydispersive characteristics depending on the implanted ion dose. (C) 2010 American Institute of Physics. [doi:10.1063/1.3493241]

Surface plasmon resonance of gold nanoparticles formed by cathodic arc plasma ion implantation into polymer

Shallow subsurface layers of gold nanoclusters were formed in polymethylmethacrylate (PMMA) polymer by very low energy (49 eV) gold ion implantation. The ion implantation process was modeled by computer simulation and accurately predicted the layer depth and width. Transmission electron microscopy (TEM) was used to image the buried layer and individual nanoclusters; the layer width was similar to 6-8 nm and the cluster diameter was similar to 5-6 nm. Surface plasmon resonance (SPR) absorption effects were observed by UV-visible spectroscopy. The TEM and SPR results were related to prior measurements of electrical conductivity of Au-doped PMMA, and excellent consistency was found with a model of electrical conductivity in which either at low implantation dose the individual nanoclusters are separated and do not physically touch each other, or at higher implantation dose the nanoclusters touch each other to form a random resistor network (percolation model). (C) 2009 American Vacuum Society. [DOI: 10.1116/1.3231449]

Structural properties of buried conducting layers formed by very low energy ion implantation of gold into polymer

We have investigated the fundamental structural properties of conducting thin films formed by implanting gold ions into polymethylmethacrylate (PMMA) polymer at 49 eV using a repetitively pulsed cathodic arc plasma gun. Transmission electron microscopy images of these composites show that the implanted ions form gold clusters of diameter similar to 2-12 nm distributed throughout a shallow, buried layer of average thickness 7 nm, and small angle x-ray scattering (SAXS) reveals the structural properties of the PMMA-gold buried layer. The SAXS data have been interpreted using a theoretical model that accounts for peculiarities of disordered systems.

Gold-implanted shallow conducting layers in polymethylmethacrylate

PMMA (polymethylmethacrylate) was ion implanted with gold at very low energy and over a range of different doses using a filtered cathodic arc metal plasma system. A nanometer scale conducting layer was formed, fully buried below the polymer surface at low implantation dose, and evolving to include a gold surface layer as the dose was increased. Depth profiles of the implanted material were calculated using the Dynamic TRIM computer simulation program. The electrical conductivity of the gold-implanted PMMA was measured in situ as a function of dose. Samples formed at a number of different doses were subsequently characterized by Rutherford backscattering spectrometry, and test patterns were formed on the polymer by electron beam lithography. Lithographic patterns were imaged by atomic force microscopy and demonstrated that the contrast properties of the lithography were well maintained in the surface-modified PMMA.

Conducting polymer formed by low energy gold ion implantation

A buried conducting layer of metal/polymer nanocomposite was formed by very low energy gold ion implantation into polymethylmethacrylate. The conducting layer is similar to 3 nm deep and of width similar to 1 nm. In situ resistivity measurements were performed as the implantation proceeded, and the conductivity thus obtained as a function of buried gold concentration. The measured conductivity obeys the behavior well established for composites in the percolation regime. The critical concentration, below which the polymer remains an insulator, is attained at a dose similar to 1.0 x 10(16) atoms/cm(2) of implanted gold ions. (C) 2008 American Institute of Physics.

High performance magnetic separation of gold nanoparticles for catalytic oxidation of alcohols

We present the magnetic separation approach to facilitate the recovery of gold nanoparticle (AuNP) catalysts. The use of magnetically recoverable supports for the immobilization of AuNPs instead of traditional oxides, polymers or carbon based solids guarantees facile, clean, fast and efficient separation of the catalyst at the end of the reaction cycle. Magnetic separation can be considered an environmentally benign separation approach, since it minimizes the use of auxiliary substances and energy for achieving catalyst recovery. The catalyst preparation is based on the immobilization of Au(3+) on the surface of core-shell silica-coated magnetite nanoparticles, followed by metal reduction using two different methods. AuNPs were prepared by thermal reduction in air and by hydrogen reduction at mild temperature. Interestingly, the mean particle size of the supported AuNPs was similar (ca. 5.9 nm), but the polydispersity of the samples is quite different. The catalytic activity of both catalysts in the aerobic oxidation of alcohols was investigated and a distinct selectivity for benzyl alcohol oxidation was observed.

Clean preparation of methyl esters in one-step oxidative esterification of primary alcohols catalyzed by supported gold nanoparticles

Methyl esters were prepared by the clean, one-step catalytic esterification of primary alcohols using molecular oxygen as a green oxidant and a newly developed SiO(2)-supported gold nanoparticle catalyst. The catalyst was highly active and selective in a broad range of pressure and temperature. At 3 atm O(2) and 130 degrees C benzyl alcohol was converted to methyl benzoate with 100% conversion and 100% selectivity in 4 h of reaction. This catalytic process is much ""greener"" than the conventional reaction routes because it avoids the use of stoichiometric environmentally unfriendly oxidants, usually required for alcohol oxidation, and the use of strong acids or excess of reactants or constant removal of products required to shift the equilibrium to the desired esterification product.

Cold nuclear matter effects on J/psi production as constrained by deuteron-gold measurements at root S(NN)=200 GeV

We present a new analysis of J/psi production yields in deuteron-gold collisions at root s(NN) =200 GeV using data taken from the PHENIX experiment in 2003 and previously published in S. S. Adler [Phys. Rev. Lett 96, 012304 (2006)]. The high statistics proton-proton J/psi data taken in 2005 are used to improve the baseline measurement and thus construct updated cold nuclear matter modification factors (R(dAu)). A suppression of J/psi in cold nuclear matter is observed as one goes forward in rapidity (in the deuteron-going direction), corresponding to a region more sensitive to initial-state low-x gluons in the gold nucleus. The measured nuclear modification factors are compared to theoretical calculations of nuclear shadowing to which a J/psi (or precursor) breakup cross section is added. Breakup cross sections of sigma(breakup)=2.8(-1.4)(+1.7) (2.2(-1.5)(+1.6)) mb are obtained by fitting these calculations to the data using two different models of nuclear shadowing. These breakup cross-section values are consistent within large uncertainties with the 4.2 +/- 0.5 mb determined at lower collision energies. Projecting this range of cold nuclear matter effects to copper-copper and gold-gold collisions reveals that the current constraints are not sufficient to firmly quantify the additional hot nuclear matter effect.

Centrality dependence of charged hadron production in deuteron plus gold and nucleon plus gold collisions at root S(NN)=200 GeV

We present transverse momentum (p(T)) spectra of charged hadrons measured in deuteron-gold and nucleon-gold collisions at root s(NN)=200 GeV for four centrality classes. Nucleon-gold collisions were selected by tagging events in which a spectator nucleon was observed in one of two forward rapidity detectors. The spectra and yields were investigated as a function of the number of binary nucleon-nucleon collisions, nu, suffered by deuteron nucleons. A comparison of charged particle yields to those in p+p collisions show that yield per nucleon-nucleon collision saturates with nu for high momentum particles. We also present the charged hadron to neutral pion ratios as a function of p(T).

Synergistic interaction between gold nanoparticles and nickel phthalocyanine in layer-by-layer (LbL) films: evidence of constitutional dynamic chemistry (CDC)

The concept of constitutional dynamic chemistry (CDC) based on the control of non-covalent interactions in supramolecular structures is promising for having a large impact on nanoscience and nanotechnology if adequate nanoscale manipulation methods are used. In this study, we demonstrate that the layer-by-layer (LbL) technique may be used to produce electroactive electrodes with ITO coated by tetrasulfonated nickel phthalocyanine (NiTsPc) alternated with poly(allylamine hydrochloride) (PAH) incorporating gold nanoparticles (AuNP), in which synergy has been achieved in the interaction between the nanoparticles and NiTsPc. The catalytic activity toward hydrogen peroxide (H(2)O(2)) in multilayer films was investigated using cyclic voltammetry, where oxidation of H(2)O(2) led to increased currents in the PAH-AuNP/NiTsPc films for the electrochemical processes associated with the phthalocyanine ring and nickel at 0.52 and 0.81 V vs. SCE, respectively, while for PAH/NiTsPc films (without AuNP) only the first redox process was affected. In control experiments we found out that the catalytic activity was not solely due to the presence of AuNP, but rather to the nanoparticles inducing NiTsPc supramolecular structures that favored access to their redox sites, thus yielding strong charge transfer. The combined effects of NiTsPc and AuNP, which could only be observed in nanostructured LbL films, point to another avenue to pursue within the CDC paradigm.

Structural control of gold nanoparticles self-assemblies by layer-by-layer process

This work presents a novel way to introduce gold nanoparticles (Au NPs) in a multilayer polymer produced by the layer-by-layer (LbL) assembling technique. The technique chosen shows that, depending on the pH used, different morphological structures can be obtained from monolayer or bilayer Au NPs. The MEIS and RBS techniques allowed for the modelling of the interface polymer-NPs, as well as the understanding of the interaction of LbL system, when adjusting the pH in weak polyelectrolytes. The process reveals that the optical properties of multilayer systems could be fine-tuned by controlling the addition of metallic nanoparticles, which could also modify specific polarization responses.