Simulation of rectifier voltage malfunction on OWECS, four-level converter, HVDC light link: Smart grid context tool

This paper presents a model for the simulation of an offshore wind system having a rectifier input voltage malfunction at one phase. The offshore wind system model comprises a variable-speed wind turbine supported on a floating platform, equipped with a permanent magnet synchronous generator using full-power four-level neutral point clamped converter. The link from the offshore floating platform to the onshore electrical grid is done through a light high voltage direct current submarine cable. The drive train is modeled by a three-mass model. Considerations about the smart grid context are offered for the use of the model in such a context. The rectifier voltage malfunction domino effect is presented as a case study to show capabilities of the model. (C) 2015 Elsevier Ltd. All rights reserved.

On-axis joint transform correlation based on a four-level power spectrum

We propose a method to obtain a single centered correlation with use of a joint transform correlator. We analyze the required setup to carry out the whole process optically, and we also present experimental results.

Four-level systems and a universal quantum gate

We discuss the possibility of implementing a universal quantum XOR gate by using two coupled quantum dots subject to external magnetic fields that are parallel and slightly different. We consider this system in two different field configurations. In the first case, parallel external fields with the intensity difference at each spin being proportional to the time-dependent interaction between the spins. A general exact solution describing this system is presented and analyzed to adjust field parameters. Then we consider parallel fields with intensity difference at each spin being constant and the interaction between the spins switching on and off adiabatically. In both cases we adjust characteristics of the external fields (their intensities and duration) in order to have the parallel pulse adequate for constructing the XOR gate. In order to provide a complete theoretical description of all the cases, we derive relations between the spin interaction, the inter-dot distance, and the external field. (C) 2008 WILEYNCH Verlag GmbH & Co. KGaA. Weinheim.

Methanol laser line assignments: evidence of four-level laser systems

The Ritz computer program, developed for facilitating the assignment of molecular Fourier transform absorption spectra and described in a previous work, determines the energy level values involved in the assigned transitions by the Rydberg-Ritz combination principle. Combining the data obtained from the analyses of high-resolution infrared (IR) and far-infrared (FIR) spectra, it is possible to predict possible FIR laser emissions of molecules. In the present work we have applied this method to the common isotopomer methanol, 12CH3 16OH, and obtained 14 proposed assignments for previously unassigned FIR laser lines. We also predict 15 possible new FIR laser emissions. For the first time, an assignment involving a four-level laser system with collisional population transfer to a slightly higher energy level is reported. © 1998 Academic Press.

Modeling data with structural and temporal correlation using lower level and higher level multilevel models

Novel imaging techniques are playing an increasingly important role in drug development, providing insight into the mechanism of action of new chemical entities. The data sets obtained by these methods can be large with complex inter-relationships, but the most appropriate statistical analysis for handling this data is often uncertain - precisely because of the exploratory nature of the way the data are collected. We present an example from a clinical trial using magnetic resonance imaging to assess changes in atherosclerotic plaques following treatment with a tool compound with established clinical benefit. We compared two specific approaches to handle the correlations due to physical location and repeated measurements: two-level and four-level multilevel models. The two methods identified similar structural variables, but higher level multilevel models had the advantage of explaining a greater proportion of variation, and the modeling assumptions appeared to be better satisfied.

Offshore wind turbine simulation: multibody drive train. Bacl-to-back NPC (Neutral Point Clamped) converters: Fractional-order control

This paper is on offshore wind energy conversion systems installed on the deep water and equipped with back-to-back neutral point clamped full-power converter, permanent magnet synchronous generator with an AC link. The model for the drive train is a five-mass model which incorporates the dynamic of the structure and the tower in order to emulate the effect of the moving surface. A three-level converter and a four-level converter are the two options with a fractional-order control strategy considered to equip the conversion system. Simulation studies are carried out to assess the quality of the energy injected into the electric grid. Finally, conclusions are presented. (C) 2014 Elsevier Ltd. All rights reserved.

Multilevel oblique corpectomy for cervical spondylotic myelopathy preserves segmental motion.

PURPOSE: To document the neurological outcome, spinal alignment and segmental range of movement after oblique cervical corpectomy (OCC) for cervical compressive myelopathy. METHODS: This retrospective study included 109 patients--93 with cervical spondylotic myelopathy and 16 with ossified posterior longitudinal ligament in whom spinal curvature and range of segmental movements were assessed on neutral and dynamic cervical radiographs. Neurological function was measured by Nurick's grade and modified Japanese Orthopedic Association (JOA) scores. Eighty-eight patients (81%) underwent either a single- or two-level corpectomy; the remaining (19%) undergoing three- or four-level corpectomies. The average duration of follow-up was 30.52 months. RESULTS: The Nurick's grade and the JOA scores showed statistically significant improvements after surgery (p < 0.001). The mean postoperative segmental angle in the neutral position straightened by 4.7 ± 6.5°. The residual segmental range of movement for a single-level corpectomy was 16.7° (59.7% of the preoperative value), for two-level corpectomy it was 20.0° (67.2%) and for three-level corpectomies it was 22.9° (74.3%). 63% of patients with lordotic spines continued to have lordosis postoperatively while only one became kyphotic without clinical worsening. Four patients with preoperative kyphotic spines showed no change in spine curvature. None developed spinal instability. CONCLUSIONS: The OCC preserves segmental motion in the short-term, however, the tendency towards straightening of the spine, albeit without clinical worsening, warrants serial follow-up imaging to determine whether this motion preservation is long lasting.

Plant species richness and environmental heterogeneity in a mountain landscape: effects of variability and spatial configuration

The loss of biodiversity has become a matter of urgent concern and a better understanding of local drivers is crucial for conservation. Although environmental heterogeneity is recognized as an important determinant of biodiversity, this has rarely been tested using field data at management scale. We propose and provide evidence for the simple hypothesis that local species diversity is related to spatial environmental heterogeneity. Species partition the environment into habitats. Biodiversity is therefore expected to be influenced by two aspects of spatial heterogeneity: 1) the variability of environmental conditions, which will affect the number of types of habitat, and 2) the spatial configuration of habitats, which will affect the rates of ecological processes, such as dispersal or competition. Earlier, simulation experiments predicted that both aspects of heterogeneity will influence plant species richness at a particular site. For the first time, these predictions were tested for plant communities using field data, which we collected in a wooded pasture in the Swiss Jura mountains using a four-level hierarchical sampling design. Richness generally increased with increasing environmental variability and "roughness" (i.e. decreasing spatial aggregation). Effects occurred at all scales, but the nature of the effect changed with scale, suggesting a change in the underlying mechanisms, which will need to be taken into account if scaling up to larger landscapes. Although we found significant effects of environmental heterogeneity, other factors such as history could also be important determinants. If a relationship between environmental heterogeneity and species richness can be shown to be general, recently available high-resolution environmental data can be used to complement the assessment of patterns of local richness and improve the prediction of the effects of land use change based on mean site conditions or land use history.

Two-dimensional atom localization and Raman cooling of tripod-type atoms

Both atom localization and Raman cooling, considered in the thesis, reflect recent progress in the area of all-optical methods. We focus on twodimensional (2D) case, using a four-level tripod-type atomic scheme for atom localization within the optical half-wavelength as well as for efficient subrecoil Raman cooling. In the first part, we discuss the principles of 1D atom localization, accompanying by an example of the measurement of a spontaneously-emitted photon. Modifying this example, one archives sub-wavelength localization of a three-level -type atom, measuring the population in its upper state. We go further and obtain 2D sub-wavelength localization for a four-level tripod-type atom. The upper-state population is classified according to the spatial distribution, which in turn forms such structures as spikes, craters and waves. The second part of the thesis is devoted to Raman cooling. The cooling process is controlled by a sequence of velocity-selective transfers from one to another ground state. So far, 1D deep subrecoil cooling has been carried out with the sequence of square or Blackman pulses, applied to -type atoms. In turn, we discuss the transfer of atoms by stimulated Raman adiabatic passage (STIRAP), which provides robustness against the pulse duration if the cooling time is not in any critical role. A tripod-type atomic scheme is used for the purpose of 2D Raman cooling, allowing one to increase the efficiency and simplify the realization of the cooling.

Performance of Supply Chain when using selected Coordination Mechanisms

Coordination among supply chain members is essential for better supply chain performance. An effective method to improve supply chain coordination is to implement proper coordination mechanisms. The primary objective of this research is to study the performance of a multi-level supply chain while using selected coordination mechanisms separately, and in combination, under lost sale and back order cases. The coordination mechanisms used in this study are price discount, delay in payment and different types of information sharing. Mathematical modelling and simulation modelling are used in this study to analyse the performance of the supply chain using these mechanisms. Initially, a three level supply chain consisting of a supplier, a manufacturer and a retailer has been used to study the combined effect of price discount and delay in payment on the performance (profit) of supply chain using mathematical modelling. This study showed that implementation of individual mechanisms improves the performance of the supply chain compared to ‘no coordination’. When more than one mechanism is used in combination, performance in most cases further improved. The three level supply chain considered in mathematical modelling was then extended to a three level network supply chain consisting of a four retailers, two wholesalers, and a manufacturer with an infinite part supplier. The performance of this network supply chain was analysed under both lost sale and backorder cases using simulation modelling with the same mechanisms: ‘price discount and delay in payment’ used in mathematical modelling. This study also showed that the performance of the supply chain is significantly improved while using combination of mechanisms as obtained earlier. In this study, it is found that the effect (increase in profit) of ‘delay in payment’ and combination of ‘price discount’ & ‘delay in payment’ on SC profit is relatively high in the case of lost sale. Sensitivity analysis showed that order cost of the retailer plays a major role in the performance of the supply chain as it decides the order quantity of the other players in the supply chain in this study. Sensitivity analysis also showed that there is a proportional change in supply chain profit with change in rate of return of any player. In the case of price discount, elasticity of demand is an important factor to improve the performance of the supply chain. It is also found that the change in permissible delay in payment given by the seller to the buyer affects the SC profit more than the delay in payment availed by the buyer from the seller. In continuation of the above, a study on the performance of a four level supply chain consisting of a manufacturer, a wholesaler, a distributor and a retailer with ‘information sharing’ as coordination mechanism, under lost sale and backorder cases, using a simulation game with live players has been conducted. In this study, best performance is obtained in the case of sharing ‘demand and supply chain performance’ compared to other seven types of information sharing including traditional method. This study also revealed that effect of information sharing on supply chain performance is relatively high in the case of lost sale than backorder. The in depth analysis in this part of the study showed that lack of information sharing need not always be resulting in bullwhip effect. Instead of bullwhip effect, lack of information sharing produced a huge hike in lost sales cost or backorder cost in this study which is also not favorable for the supply chain. Overall analysis provided the extent of improvement in supply chain performance under different cases. Sensitivity analysis revealed useful insights about the decision variables of supply chain and it will be useful for the supply chain management practitioners to take appropriate decisions.

Determinacion de condiciones laborales de los trabajadores de cuatro hospitales de primer nivel y dos de segundo nivel en el departamento del Quindio – Colombia 2012

Objetivo: Determinar condiciones laborales de los trabajadores de cuatro hospitales de primer nivel y dos de segundo nivel en el departamento del Quindío - Colombia 2012. Metodología: Se realizó un estudio descriptivo de corte transversal con una muestra de 577 trabajadores del sector sanitario de cuatro hospitales de primer nivel y dos de segundo nivel en el departamento de Quindío – Colombia mediante la recolección de datos demográficos y la aplicación de las siguientes encuestas: “Encuesta Nacional de Condiciones de Trabajo” del Instituto Nacional de Seguridad e Higiene en el Trabajo de España (INSHT), en su versión validada para el idioma español: “Irritation Index”. Con fines de analizar la información obtenida se creó una base de datos con base en lo contenido en las encuestas válidas y se realizaron tablas dinámicas en Excel Resultados: participaron 577 trabajadores hospitalarios, encontrándose un 72% de personal femenino y un 28% de personal masculino con una relación H:M 2:6. De la población total encuestada, un 72% corresponde a trabajadores del área asistencial y un 28% al área administrativa. Se encontró una alta percepción de riesgo ergonómico (manejo de cargas, 81%, movimientos repetitivos 91%, posturas forzadas, 49%). Los síntomas osteomusculares referidos fueron: dolor cervical 20%, dolor en región dorsal media 17%, dolor en el hombro 62%, dolor en muñeca 27% y dolor en codo 10%. En la percepción de carga mental y factores de riesgo psicosocial se observó que el 92% de los trabajadores requiere un alto nivel de atención en la ejecución de sus tareas, el 77%, debe atender varias tareas al mismo tiempo, el 52% realiza tarea complejas, el 49% ve necesario esconder sus emociones en el sitio de trabajo, el 13% considera que su trabajo es excesivo, el 43% manifiesta la necesidad de trabajar rápido en el desarrollo de sus funciones, el 69% trabaja con plazos estrictos muy cortos el66% considera que el ritmo de trabajo está determinado por plazos temporales a cumplir. Por otro lado se encuentra una adecuada percepción de la autonomía (93-94%) en la escogencia del método de trabajo, ritmo de trabajo, establecimiento del orden de las tareas a cumplir. En general las relaciones interpersonales son percibidas de manera positiva encontrándose que el 98% recibe ayuda de sus compañeros y el 97% afirma contar con la ayuda de sus superiores. En cuanto a la violencia física en el lugar de trabajo se encuentra que un 6 % ha sido víctima de agresión por parte de personas ajenas al lugar de trabajo. En lo concerniente al percepción de la salud física, el 48% refiere un óptimo estado de salud, mientras que en lo referente a la salud mental se encuentra más frecuentemente alteraciones del sueño (20%), sensación de tensión (20%), tristeza y/o depresión (13%), dificultad para desconectarse del trabajo (15%). Discusión: En la población estudiada se encontró una alta percepción de condiciones ergonómicas inadecuadas dadas por posturas forzadas, manipulación de cargas y movimientos repetitivos, así como exposición a riesgo biológico y factores de riesgo psicosocial. Resulta importante destacar que los hallazgos obtenidos reflejan lo reportado en la literatura internacional y dejan de manifiesto la importancia de reflexionar sobre la necesidad de identificar los riesgos, sensibilizar a la población y de priorizar las actuaciones preventivas.

Sex/gender differences and autism: setting the scene for future research

Objective The relationship between sex/gender differences and autism has attracted a variety of research ranging from clinical, neurobiological to etiological, stimulated by the male bias in autism prevalence. Findings are complex and do not always relate to each other in a straightforward manner. Distinct but interlinked questions on the relationship between sex/gender differences and autism remain under addressed. To better understand the implications from existing research and to help design future studies, we propose a four-level conceptual framework to clarify the embedded themes. Method We searched PubMed for publications before September 2014 using search terms “‘sex OR gender OR females’ AND autism.” 1,906 citations were screened for relevance, along with publications identified via additional literature reviews, resulting in 329 reports that were reviewed. Results Level 1 “Nosological and diagnostic challenges” concerns the question “How should autism be defined and diagnosed in males and females?” Level 2 “Sex/gender-independent and sex/gender-dependent characteristics” addresses the question “What are the similarities and differences between males and females with autism?” Level 3 “General models of etiology: liability and threshold” asks the question “How is the liability for developing autism linked to sex/gender?” Level 4 “Specific etiological-developmental mechanisms” focuses on the question “What etiological-developmental mechanisms of autism are implicated by sex/gender and/or sexual/gender differentiation?” Conclusions Using this conceptual framework, findings can be more clearly summarized, and the implications of the links between findings from different levels can become clearer. Based on this four-level framework, we suggest future research directions, methodology, and specific topics in sex/gender differences and autism.

Two-photon absorption of perylene derivatives: Interpreting the spectral structure

This work investigates the two-photon absorption spectrum of perylene tetracarboxylic derivatives using the white-light continuum Z-scan technique. Perylene derivatives present relatively high two-photon absorption cross-section, which makes them attractive for applications in photonics. Because of the spectral resolution of the white-light continuum Z-scan, we were able to observe a well defined structure in the two-photon absorption spectrum, composed by two distinct peaks. These peaks, as well as the resonant enhancement of the nonlinearity, were modeled using the sum-over-states approach considering a four-level energy diagram with two final two-photon states. The existence of such states was confirmed using the response function formalism within the DFT framework. (C) 2009 Elsevier B.V. All rights reserved.

Farelo de trigo na alimentação de poedeiras semipesadas na fase de recria

O estudo foi conduzido com o objetivo de avaliar os efeitos da inclusão de farelo de trigo (FT) na ração sobre o desempenho de frangas semipesadas nas fases de recria 1 (7 a 14 semanas de idade) e recria 2 (15 a 19 semanasde idade) e seu efeito residual durante a fase inicial de produção de ovos. Foram utilizadas 160 frangas Lohmann Brown distribuídas em delineamento inteiramente casualizado, com quatro níveis de FT na ração: 0 (controle), 10, 20 e 30%, que resultaram em quatro tratamentos, com cinco repetições de oito aves na fase de recria 1. Ao completarem 14 semanas, as aves foram transferidas para gaiolas de arame galvanizado, redistribuídas em seis repetições de seis aves. Utilizaram-se 144 aves e descartaram-se, aleatoriamente, quatro aves por tratamento, constituindo a fase de recria 2. A adição de FT diminuiu linearmente o peso vivo final e o ganho de peso, resultando em reduções de 1,15 e 0,03 g, respectivamente, para cada 1% de inclusão de FT na ração. O consumo de água aumentou de forma quadrática e cresceu, em valores absolutos, com o aumento de 0 a 30% de farelo de trigo. A cada aumento de 1% de FT na ração, a idade das aves ao primeiro ovo elevou aproximadamente 0,6 dia e o peso do ovo em 0,22 g. A inclusão de farelo de trigo na ração reduz a taxa de crescimento de frangas, atrasa o início da postura, mas melhora o peso inicial dos ovos em relação a dietas à base de milho e de farelo de soja.

Computational speed-up with a single qudit

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)