Flame retardant properties of the bark powder of Anadenanthera peregrina var. falcata (Benth.) Altschul (angico) studied by coupled thermogravimetry-Fourier transform infrared spectroscopy

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Approved List. Flame-Retardant Application Concerns, Fabrics, Materials and Chemicals

Mode of access: Internet.

(Table S1) Brominated flame retardant concentrations in an ice core from Holtedahlfonna, Svalbard

Brominated flame retardants (BFRs) have been found in Arctic wildlife, lake sediment, and air. To identify the atmospheric BFR deposition history on Svalbard, Norway, we analyzed 19 BFRs, including hexabromocyclododecane (HBCD), 1,2-bis(2,4,6-tribromophenoxy)ethane (BTBPE), decabromodiphenyl ethane (DBDPE), pentabromoethylbenzene (PBEB),and 15 polybrominated diphenyl ether congeners (PBDE) in the upper 34 m of an ice core (representing 1953-2005) from Holtedahlfonna, the western-most ice sheet on Svalbard. All of the non-PBDE compounds were detected in nearly continuous profiles in the core. Seven PBDEs were not observed above background (28,47,66,100,99,154,153), while 4 were found in 1 or 2 of 6 segments (17,85,138,183). BDEs-49,71,190,209 had nearly continuous profiles but only BDE-209 in large amounts. The greatest inputs were HBCD and BDE-209, 910, and 320 pg/cm**2/yr from 1995-2005. DBDPE, BTBPE, and PBEB show nearly continuous input growth in recent core segments, but all were <6 pg/cm**2/yr. Long-range atmospheric processes may have moved these particle-bound BFRs to the site, probably during the Arctic haze season. Average air mass trajectories over 10 years show >75% of atmospheric flow to Holtedahlfonna coming from Eurasia during haze periods (March and April).

Flammability Standards – A Major Role in Flame Retardant Exposure? Televisions as a case study.

Flame retardants (FRs) are added to materials to enhance the fire safety level of readily combustible polymers. Although they have been purported to aid in preventing fires in some cases, they have also become a significant cause for concern given the vast data on environmental persistence and human and animal adverse health effects. Evidence since the 1980s has shown that Canadian, American and Europeans have detectable levels of FRs in their bodies. North Americans in particular have high levels of these chemicals due to stringent flammability standards and the higher use of polybrominated diphenyl ethers (PBDEs) in North America as opposed to Europe. FRs have been detected in household dust and some evidence suggests that TVs could be a significant source of exposure to FRs. It is imperative to re-visit the flammability standard (UL94V) that allows for FR use in TVs plastic materials by providing a risk versus benefit analysis to determine if this standard provides a fire safety benefit and if it plays a major role in FR exposure. This report first examined the history of televisions and the progression to the UL94V flammability test standard to understand why FRs were first added to polymers used in the manufacturing of TVs. It has been demonstrated to be due to fire hazards resulting from the use of plastic materials in cathode-ray tube (CRT) TVs that had an “instant-on” feature and high voltage and operating temperatures. In providing a risk versus benefit analysis, this paper presents the argument that 1) by providing a market survey the current flammability test standard (UL94V) is outdated and lacks relevance to current technology as flat, thin, energy efficient Liquid Crystal Displays (LCDs) dominate over traditionally used heavy, bulky and energy-intensive CRTs; 2) FRs do not impart fire safety benefits considering that there is a lack of valid fire safety concern, such as reduced internal and external ignition and fire hazard, and a lack of valid fire data and hazard for television fires in general and finally; 3) the standard is overly stringent as it does not consider the risk due to exposure to FRs in household dust due to the proliferation and greater use of televisions in households. Therefore, this report argues that the UL94V standard has become trapped in history and needs to be updated as it may play a major role in FR exposure.

Studies on the Flammability of Short Kevlar Fiber-Thermoplastic Polyurethane Composite

The flammability of short Kevlar aramide fiber-thermoplastic polyurethane (TPU) has been investigated with respect to fiber loading and various flame retardant additives such as halogen containing polymers, antimony oxide/chlorine donor combination, zinc borate, and aluminum hydroxide. Smoke generation was reduced drastically, while the oxygen index was reduced marginally in the presence of short fibers. The best improvement in the oxygen index was obtained with antimony oxide/chlorinated paraffin wax combination, in the weight ratio 1:6. A 70 phr loading of aluminum hydroxide improved LOI and reduced smoke generation.

New families of highly efficient, halogen-free flame retardants for polypropylene (PP)

The driving forces for current research of flame retardants are increased fire safety in combination with flame retardant formulations that fulfill the criteria of sustainable production and products. In recent years, important questions about the environmental safety of antimony, and in particular, brominated flame retardants have been raised. As a consequence of this, the current doctoral thesis work describes efforts to develop new halogen-free flame retardants that are based on various radical generators and phosphorous compounds. The investigation was first focused on compounds that are capable of generating alkyl radicals in order to study their role on flame retardancy of polypropylene. The family of azoalkanes was selected as the cleanest and most convenient source of free alkyl radicals. Therefore, a number of symmetrical and unsymmetrical azoalkanes of the general formula R-N=N-R’ were prepared. The experimental results show that in the series of different sized azocycloalkanes the flame retardant efficacy decreased in the following order: R = R´= cyclohexyl > cyclopentyl > cyclobutyl > cyclooctanyl > cyclododecanyl. However, in the series of aliphatic azoalkanes compounds, the efficacy decreased as followed: R = R´= n-alkyl > tert-butyl > tert-octyl. The most striking difference in flame retardant efficacy was observed in thick polypropylene plaques of 1 mm, e.g. azocyclohexane (AZO) had a much better flame retardant performance than did the commercial reference FR (Flamestab® NOR116) in thick PP sections. In addition, some of the prepared azoalkane flame retardants e.g. 4’4- bis(cyclohexylazocyclohexyl) methane (BISAZO) exhibited non-burning dripping behavior. Extrusion coating experiments of flame retarded low density polyethylene (LDPE) onto a standard machine finished Kraft paper were carried out in order to investigate the potential of azoalkanes in multilayer facings. The results show that azocyclohexane (AZO) and 4’4-bis (cyclohexylazocyclohexyl) methane (BISAZO) can significantly improve the flame retardant properties of low density polyethylene coated paper already at 0.5 wt.% loadings, provided that the maximum extrusion temperature of 260 oC is not exceeded and coating weight is kept low at 13 g/m2. In addition, various triazene-based flame retardants (RN1=N2-N3R’R’’) were prepared. For example, polypropylene samples containing a very low concentration of only 0.5 wt.% of bis- 4’4’-(3’3’-dimethyltriazene) diphenyl ether and other triazenes passed the DIN 4102-1 test with B2 classification. It is noteworthy that no burning dripping could be detected and the average burning times were very short with exceptionally low weight losses. Therefore, triazene compounds constitute a new and interesting family of radical generators for flame retarding of polymeric materials. The high flame retardant potential of triazenes can be attributed to their ability to generate various types of radicals during their thermal decomposition. According to thermogravimetric analysis/Fourier transform infrared spectroscopy/MS analysis, triazene units are homolytically cleaved into various aminyl, resonance-stabilized aryl radicals, and different CH fragments with simultaneous evolution of elemental nitrogen. Furthermore, the potential of thirteen aliphatic, aromatic, thiuram and heterocyclic substituted organic disulfide derivatives of the general formula R-S-S-R’ as a new group of halogen-free flame retardants for polypropylene films have been investigated. According to the DIN 4102- 1 standard ignitibility test, for the first time it has been demonstrated that many of the disulfides alone can effectively provide flame retardancy and self-extinguishing properties to polypropylene films at already very low concentrations of 0.5 wt.%. For the disulfide family, the highest FR activity was recorded for 5’5’-dithiobis (2-nitrobenzoic acid). Very low values for burning length (53 mm) and burning time (10 s) reflect significantly increased fire retardant performance of this disulfide compared to other compounds in this series as well as to Flamestab® NOR116. Finally, two new, phosphorus-based flame retardants were synthesized: P’P-diphenyl phosphinic hydrazide (PAH) and melamine phenyl phosphonate (MPhP). The DIN 4102-1 test and the more stringent UL94 vertical burning test (UL94 V) were used to assess the formulations ability to extinguish a flame once ignited. A very strong synergistic effect with azoalkanes was found, i.e. in combination with these radical generators even UL94 V0 rate could be obtained.

Solid-phase Microextraction and Detection of Organophosphate Triesters in Indoor air

In the work underlying this thesis solid-phase microextraction (SPME) was evaluated as a passive sampling technique for organophosphate triesters in indoor air. These compounds are used on a large scale as flame-retarding and plastizicing additives in a variety of materials and products, and have proven to be common pollutants in indoor air. The main objective of this work was to develop an accurate method for measuring the volatile fraction. Such a method can be used in combination with active sampling to obtain information regarding the vapour/particulate distribution in different indoor environments. SPME was investigated under both equilibrium and non-equilibrium conditions and parameters associated with these different conditions were estimated. In Paper I, time-weighted average (TWA) SPME under dynamic conditions was investigated in order to obtain a fast air sampling method for organophosphate triesters. Among the investigated SPME coatings, the absorptive PDMS polymer had the highest affinity for the organophosphate triesters and was consequently used in all further work. Since the sampling rate is dependent on the agitation conditions, the linear airflow rates had to be carefully considered. Sampling periods as short as 1 hour were shown to be sufficient for measurements in the ng-μg m-3 range when using a PDMS 100-μm fibre and a linear flow rate above 7 cm s-1 over the fibre. SPME under equilibrium conditions is rather time-consuming, even under dynamic conditions, for slowly partitioning compounds such as organophosphate triesters. Nevertheless, this method has some significant advantages. For instance, the limit of detection is much lower compared to 1 h TWA sampling. Furthermore, the sampling time can be ignored as long as equilibrium has been attained. In Paper II, SPME under equilibrium conditions was investigated and evaluated for organophosphate triester vapours. Since temperature and humidity are closely associated with the distribution constant a simple study of the effect of these parameters was performed. The obtained distribution constants were used to determine the air levels in a common indoor environment. SPME and parallel active sampling on filters yielded similar results, indicating that the detected compounds were almost entirely associated with the vapour phase To apply dynamic SPME method in the field a sampler device, which enables controlled linear airflow rates to be applied, was constructed and evaluated (Paper III). This device was developed for application of SPME and active sampling in parallel. A GC/PICI-MS/MS method was developed and used in combination with active sampling of organophosphate triesters in indoor air (Paper IV). The combination of MS/MS and the soft ionization achieved with methanol as reagent gas yielded high selectivity and detection limits comparable to those provided by GC with nitrogen-phosphorus detection (NPD). The method limit of detection, when sampling 1.5 m3 of air, was in the range 0.1-1.4 ng m-3. In Paper V, the developed MS method was used in combination with SPME for indoor air measurements. The levels detected in the investigated indoor environments range from a few ng to μg m-3. Tris(2-chloropropyl) phosphate was detected at a concentration as high as 7 μg m-3 in a newly rebuilt lecture room.

Investigación de mezclas de caucho, con bajo contenido en cloro, para bandas transportadoras con características ignífugas

El objeto de la tesis doctoral se centra en la obtención de una banda transportadora de minería exenta de halógenos o al menos con el menor contenido posible, es por ello que se ha realizado un estudio de diferentes matrices poliméricas sin halógenos y se han evaluado diferentes sistemas ignifugantes. Se ha partido de mezclas con base polimérica de caucho natural y de estireno butadieno ya que son cauchos sin halógenos y con los que se pueden obtener mezclas de buenas propiedades mecánicas. Los resultados obtenidos durante el desarrollo de la tesis han sido muy satisfactorios, ya que se fabricaron bandas a gran escala para poder realizar los ensayos descritos en la normativa UNE EN 14973. La clasificación adquirida, categoría B1, alcanza dos de los objetivos marcados al inicio de los trabajos de investigación, y por tanto puede dar lugar a: - La fabricación a nivel industrial - La comercialización de una banda retardante de llama para minería y obra subterránea, formulada con un nuevo aditivo que reduce notablemente el contenido en cloro. - Disminución de la contaminación derivada de los humos tóxicos producidos cuando una banda transportadora arde accidentalmente. Los aditivos retardantes de llama sin halógenos, son muy efectivos en dosis elevadas, para la obtención de mezclas con propiedades ignífugas, pero las propiedades mecánicas de las mezclas se debilitan. Se ha buscado un compromiso entre las propiedades ignífugas y mecánicas, por lo que resulta adecuado obtener aditivos que posean un tamaño de partícula tal que actúen como cargas semi-reforzantes para poder utilizarlos en mayor proporción y así poder conseguir las propiedades ignífugas deseadas sin alterar de forma significativa las demás propiedades de la mezcla. ABSTRACT The purpose of this thesis is to obtain a mining conveyor belt with minimal halogen content, with the final objective of being halogen-free. Several polymer matrices without halogen and as well as fireproof systems have been analyzed to achieve this goal. The polymer mixtures studied are based on natural rubber and styrene butadiene, due to the fact that are rubbers without halogens and which their mixtures have good mechanical properties. The outcome of the thesis research is satisfactory, since the results are manufactured conveyor belts that comply with the tests described in the UNE EN 14973. The obtained B1 classification achieves two objectives set at the beginning of the research, and therefore can lead to: - Manufacturing at industrial level - Marketing of a flame retardant conveyor belt for mining and underground works formulated with a new additive that significantly reduces the chlorine content - Reduce pollution produced of the toxic fumes generated when a conveyor accidentally burns Additive flame retardant halogen-free are very effective in high doses to obtain blends with flame retardant properties, but the mechanical properties of the blends are below standards. A compromise between the fire retardant and mechanical properties has been successfully obtained, making possible to obtain additives that show a particle size that act as semi-reinforcing load in order to use a greater extent and thus be able to achieve the pursued fire retardant properties without altering significant other properties of mixture.

Evaluation of the Genotoxic and Physiological Effects of Decabromodiphenyl Ether (BDE-209) and Dechlorane Plus (DP) Flame Retardants in Marine Mussels (Mytilus galloprovincialis)

Dechlorane Plus (DP) is a proposed alternative to the legacy flame retardant decabromodiphenyl ether (BDE-209), a major component of Deca-BDE formulations. In contrast to BDE-209, toxicity data for DP are scarce and often focused on mice. Validated dietary in vivo exposure of the marine bivalve (Mytilus galloprovincialis) to both flame retardants did not induce effects at the physiological level (algal clearance rate), but induced DNA damage, as determined by the comet assay, at all concentrations tested. Micronuclei formation was induced by both DP and BDE-209 at the highest exposure concentrations (100 and 200 mu g/L, respectively, at 18% above controls). DP caused effects similar to those by BDE-209 but at lower exposure concentrations (5.6, 56, and 100 mu g/L for DP and 56, 100, and 200 mu g/L for BDE-209). Moreover, bioaccumulation of DP was shown to be concentration dependent, in contrast to BDE-209. The results described suggest that DP poses a greater genotoxic potential than BDE-209

Evaluation of the Genotoxic and Physiological Effects of Decabromodiphenyl Ether (BDE-209) and Dechlorane Plus (DP) Flame Retardants in Marine Mussels (Mytilus galloprovincialis)

Dechlorane Plus (DP) is a proposed alternative to the legacy flame retardant decabromodiphenyl ether (BDE-209), a major component of Deca-BDE formulations. In contrast to BDE-209, toxicity data for DP are scarce and often focused on mice. Validated dietary in vivo exposure of the marine bivalve (Mytilus galloprovincialis) to both flame retardants did not induce effects at the physiological level (algal clearance rate), but induced DNA damage, as determined by the comet assay, at all concentrations tested. Micronuclei formation was induced by both DP and BDE-209 at the highest exposure concentrations (100 and 200 mu g/L, respectively, at 18% above controls). DP caused effects similar to those by BDE-209 but at lower exposure concentrations (5.6, 56, and 100 mu g/L for DP and 56, 100, and 200 mu g/L for BDE-209). Moreover, bioaccumulation of DP was shown to be concentration dependent, in contrast to BDE-209. The results described suggest that DP poses a greater genotoxic potential than BDE-209

Estudo de retardantes de chama, isentes de halogéneos, em espumas de poliuretano monocomponente

Estágio de natureza profissional para obtenção do grau de Mestre em Engenharia Química

Organofosforiyhdisteille (TBEP ja TEHP) altistuminen työpaikoilla

Työssä mitattiin työilman TBEP- ja TEHP-pitoisuuksia siivousalalla (3 kohdetta) ja muovituoteteollisuudessa (2 kohdetta). Pitoisuutta ilmassa verrattiin työntekijöidenbiomonitorointinäytteistä analysoitujen 2-butoksietikkahapon (2-BAA) ja 2-etyyliheksaanihapon (2-EHA) pitoisuuteen. Tavoitteena oli biomonitoroin-timenetelmän soveltuvuuden selvittäminen altistumisen arvioinnissa sekä tarvittavien lisäsuojaus- ja torjunta-tarpeiden selvittäminen. Biomonitorointia sekoittavien tekijöiden (2-butoksietanoli ja 2-etyyli-1-heksanoli) pitoisuus mitattiin työntekijöidenhengitysilmasta kerätystä VOC-näytteestä. OVS-keräimiin kerätyt TBEP- ja TEHP-näytteet uutettiin ultraäänellä sopivalla liuottimella ja analysoitiin kaasukromatografisesti (GC). VOC-näytteet kerättiin Tenax GR ¿adsorbenttiin, irrotettiin keräimestä termodesorptiolla ja analysoitiin GC:lla. Biomonitorointinäytteiden (virtsa) 2-BAA- ja 2-EHA -pitoisuus analysoitiin myös GC:lla. Lattianvahauksen aikana siivoojien hengitysilmasta mitatuissa TBEP-näytteissä pitoisuudet vaihtelivat välillä 70 - 860 ng/m3 sekä VOC-näytteistä 88 %:sta löytyi2-butoksietanolia, jonka pitoisuus vaihteli välillä 3 - 1800 µg/m3. Virtsan 2-BAA:n pitoisuudet vaihtelivat välillä <0,3 - 26 mmol/mol kreatiniinia ollen korkeimmillaan 43 % toimenpiderajasta. Raskaana olevien toimenpideraja ylitettiin 30 % näytteistä. Muovituotetehtaissa TEHP-pitoisuus työntekijöiden hengitysilmassa oli alle määritysrajan (eli < 1 - < 3 ng/m3). Muovituotetehtaissa kerätyistä VOC-näytteistä 16 %:sta löydettiin 2-etyyli-1-heksanolia, jonka pitoisuus vaihteli välillä 90 - 100 µg/m3. Virtsan 2-EHA-pitoisuudet olivat välillä <0,1 - 0,2 mmol/mol kreatiniinia. Tulosten perusteella siivoojat altistuvat TBEP:lle ja 2-butoksietanolille lattianvahauksen yhteydessä, muttaaltistuminen ei ilman pitoisuuksien ja biomonitoroinnin tulosten mukaan aiheutaterveyshaittaa ainakaan yhden mahdollisen metaboliitin 2-BAA:n kautta. Pois lukien raskaana olevat työntekijät, joille 2-butoksietanolia sisältävän vahanpoistotuotteen käsitteleminen aiheuttaa mahdollista terveyshaittaa. Käytetyillä biomonitorointimenetelmillä ei voitu osoittaa altistumista tapahtuneen mitatuilla TBEP:n ja TEHP:n pitoi-suustasoilla. Metaboliareittien varmistamisen jälkeen on mahdollista tutkia toimivampaa menetelmää altistumisen arviointiin biomonitoroinnin avulla. Työntekijöiden suojautuminen niin muovituotetehtaissa kuin siivoustyössäkin mitattujen yhdisteiden osalta oli pääosin riittävää. Ainoastaan raskaana olevien työntekijöiden, jotka siivoustyössään altistuvat 2-butoksietanolille, suojaukseen tulisi kiinnittää huomiota.

Processamento de placas de circuito impresso de equipamentos eletroeletrônicos de pequeno porte

A hydrometallurgical process applicable to printed circuit boards of small electrical and electronic devices was developed. This involved three leaching steps (60 ºC, 2 h): 6 mol L-1 NaOH, 6 mol L-1 HCl and aqua regia. NaOH removed the resin and flame retardant that covered the circuit boards. HCl dissolved the most electropositive metals and a small amount of copper (~0.3 wt%). Aqua regia dissolved the noble metals. Silver precipitated as AgCl. Gold and platinum were quantitatively extracted with pure methyl-isobutylketone and Alamine 336 (10 % vol. in kerosene), respectively. Slow evaporation of the raffinate crystallized CuCl2.4H2O (89% yield).

Estudo da flamabilidade e resistência à chama de compósito de poliéster insaturado e fibra da folha do abacaxizeiro (PALF)

In the present research work, composites were prepared using pine apple leaf fibres (PALF) as reinforcement with unsaturated polyester resin as matrix, incorporating with fire retardant at different compositions. The PALF was obtained from the decortication of pine apple leaves obtained from Ramada 4 from Ielmo Marinho in the State of Rio Grande do Norte. The unsaturated polyester resin and the catalyzer were bought from the local establishment. The fire retardant, aluminium tri-hydroxide - Al(OH)3 was donated by Alcoa Alumínio S.A and was used in the proportions of 20%, 40% and 60% w/w. Initially the fibres were treated with 2% NaOH for 1 hour, to remove any impurities present on the fibre surface, such as wax, fat, pectin and pectate, in order to have a better adsorption of the fibres with the matrix as well as the flame retardant. The fibre mat was prepared in a mat preparator by immersion, developed in the Textile Engineering Laboratory, at the UFRN. The composites (300x300x3 mm) were prepared by compression molding and the samples (150x25x3 mm) for analysis of the properties were cut randomly using a laser cutter. Some of the cut samples were used to measure the smoke emission and fire resistance using UL94 standard. Mechanical tension-extension and flexural properties were carried in CTGás RN and the Laboratório de Metais e Ensaios Mecânicos Engenharia de Materiais UFRN , as well as SEM studies were carried out at Núcleo de Estudos em Petróleo e Gás Natural - UFRN . From the observed results, it was noted that, there was no marked influence of the fire retardant on the mechanical properties. Also in the water absorption test, the quantity of water absorbed was less in the sample with higher concentration of fire retardant. It was also observed that the increase in the proportion of the fire retardant increased the time of burning, may be due to the compactness of the composite due to the presence of fire retardant as a filling material even though it was meant to reduce the rate of inflammability of the composite