Surface barrier effects in non-resonant microwave absorption by superconducting thin films of YBa2Cu3O7??

We present an unusual temperature dependence of hysteresis in the Lion resonant microwave absorption (NRMA) signals from superconducting thin films of YBa2Cu3O7-delta. We observe that the hysteresis increases with increase in temperature till T-c which we interpret as evidence for the presence of Bean-Livingston surface barriers (BLSB) in the single crystalline films.

Did Japanese direct investment in Korea suppress indigenous industrialization in the 1930s? : evidence from country-level factory entry patterns

Foreign direct investment (FDI) can deliver both positive and negative spillovers to the local economy. Negative effects such as crowding-out or entry-barrier effects might outweigh the positive ones when the technological gap between foreign and local firms is significant. This paper examines the impact of Japanese direct investment into Korea under colonization in the 1930s on the entry of Korean-owned factories. By using the census of manufacturing factories in Korea, we exploit variations in the share of Japanese factories and their entry rates across counties within the same subsectors. We find that within a subsector, entry rates of Korean factories were higher in counties with higher presence and entry of Japanese factories. Positive correlations are also found between subsectors. The results imply that Japanese direct investment did not suppress the entry of Korean factories and that FDI could exert positive entry spillovers on indigenous firms, even at a very early stage of industrialization.

Managerial strategies in canning industries: A case study of early twentieth century Portugal

Business History, Vol, 51 Issue 1, p45-58

Determinants and impacts of inward FDI in Japan

The research consists of three empirical studies. The first examines how source country characteristics affect the aggregate FDI inflows in the Japanese economy during the period of 1989-2002. Our results demonstrate that the stable investment climate of the home country is an essential factor indicating FDI inflows to Japan. By contrast, the export performance of the source country is negatively correlated with FDI inflows, indicating that international trade and FDI are substitutes. The second study identifies the determinants of foreign penetration across Japanese manufacturing sectors at the three-digit level during the period of 1997-2003. More importantly, this study examines the moderating effects of keiretsu affiliations on the relationship between various sectoral characteristics and foreign participation. The evidence of both horizontal and vertical keiretsu impacts on foreign penetration depends on not only different proxy measures used for inward FDI, but also on the level of technological sophistication in given sectors. In general, our results demonstrate that horizontally linked keiretsu are positively associated with foreign productions in knowledge-intensive sectors. By contrast, this effect becomes a significant entry barrier to foreign employment in low-tech sectors. The final study evaluates the impacts of a foreign presence on the productivity of Japanese manufacturing firms over the period of 1997-2003. Our results suggest that spillover effects largely differ according to the level of absorptive capacity of indigenous firms.

Análisis de los posibles efectos del TLC con Estados Unidos en el subsector del maíz

En el marco del desarrollo del sector primario en Colombia, se observa la existencia de una serie de situaciones o factores adversos que le impiden alcanzar su productividad y competitividad, entre los cuales destacan los altos costos de la materia prima e insumos utilizados en los procesos productivos de siembra y cosecha, la inexistencia de políticas públicas que garanticen un verdadero apoyo al campesinado colombiano, como los subsidios y/o estrategias de protección a la producción nacional, estas últimas, como barrera a la entrada en grandes volúmenes de productos importados, resultantes de los acuerdos internacionales donde se les da mayor participación a los productos importados, como ha sido en los últimos años, los provenientes de Canadá y Estados Unidos, este último, con la firma del TLC. Lo anterior ha coadyuvando a una reducción en las áreas de cultivo, así como en el rendimiento por hectáreas; como es el caso de la agrocadena de cereales, entre los que destaca el maíz amarillo, el cual ha experimentado un alto incremento en su volumen de importación, resultado de los excedentes exportables dados en la producción agrícola norteamericana, siendo los subsidios que a través de la ley Farm Bill, el gobierno norteamericano le otorga a los productores agropecuarios, un incentivo importante para tal fin. Con base en esto, los precios internacionales de comercialización del maíz amarillo han presentado una tendencia de decrecimiento, imposibilitando a los productores colombianos afrontar esta situación. Por medio de esta investigación se busca evaluar y esclarecer los posibles efectos del TLC de Colombia con Estados Unidos sobre los productores de maíz, y así mismo porporcionar alternativas de solución tanto para los campesinos como para el gobierno, identificando las principales variables que afectan la producción del cereal

Estradas e conectividade na Mata Atlântica: identificando áreas prioritárias para aplicação de medidas de mitigação

As rodovias podem representar um importante fator na fragmentação de habitat para espécies silvestres adaptadas a habitats de alta complexidade estrutural, como as florestas tropicais. As estradas reduzem a conectividade da paisagem e a capacidade da população regional em habitar todas as áreas adequadas e estes efeitos são mais significativos nas espécies que evitam a estrada, que são, muitas vezes, espécies de interior de florestas. A magnitude dos efeitos de barreira dependerá do comportamento e mobilidade destas espécies. Quando as estradas representam ralos (sink) ou barreiras para as populações, devido, respectivamente, aos atropelamentos ou à repulsa, medidas mitigadoras são indicadas para aumentar a conectividade entre as manchas de habitat separadas por essas estradas. A qualidade do habitat é um fator que deve ser considerado, mesmo com baixas frequências de atropelamentos nesses locais. O objetivo desse estudo foi propor dois métodos de seleção de áreas prioritárias para implantação de medidas mitigadoras dos efeitos das estradas sobre espécies de vertebrados florestais: Seleção Hierárquica Multivariada e Seleção Bivariada. A área de estudo foi o bioma Mata Atlântica, sendo recortado em paisagens hexagonais em três escalas diferentes (10.000, 1.000 e 100 km), usando a extensão Repeating Shapes no programa ArcGIS 9.3. Em cada hexágono foram calculados: área de floresta e de Unidade de Conservação, densidade de estradas e de hidrografia. Apenas os hexágonos cobertos por no mínimo 45% pela Mata Atlântica, com mais de 50% de cobertura florestal e mais de 1% de Unidades de Conservação foram incluídos nas análises. Após esta seleção, no método Seleção Hierárquica Multivariada, foi feita uma análise de componentes principais (PCA) com as quatro variáveis medidas, para cada escala separadamente. Os hexágonos foram então ordenados segundo o posicionamento deles no 1 Eixo da PCA de forma hierárquica e da maior para menor escala de hexágonos. Para área de estudo o método de Seleção Bivariada foi construído um gráfico de pontos, para cada escala de hexágono, com as variáveis cobertura florestal e rios. Foram selecionados os hexágonos que estavam localizados no quadrante do gráfico que representasse maior densidade de rios e maior porcentagem de cobertura florestal. Posteriormente foi feita uma simulação para avaliar se os métodos eram capazes de recuperar escores tão alto quanto a ordenação seguindo apenas o posicionamento dos hexágonos no Eixo 1 da PCA, sem uma análise hierárquica. O método de Seleção Hierárquica Multivariada foi mais eficiente para escolha de áreas prioritárias do que a Seleção Bivariada tanto para a escala intermediária (1.000 km) quanto para a menor escala (100 km). Os cinco hexágonos de 100 km mais prioritários estão localizados em São Paulo e Paraná, abrangendo quatro UCs (PARES de Jacupiranga, APA de Guaraqueçaba, APA Cananéia- Jacuípe e PARES da Ilha do Cardoso). Devido à simplicidade e fácil aplicabilidade do método, acredita-se que este pode ser uma opção interessante para escolha de áreas prioritárias para implantação de medidas mitigadoras dos efeitos de estradas

急倾斜金属矿体开采岩体移动规律与变形趋势预测研究

Rockmass movement due to mining steep metallic ore body is a considerable question in the surface movement and deformation issue caused by underground mining. Research on coal mining induced rockmass movement and its prediction problem have been performed for a long-term, and have achieved great progress at home and abroad. However, the rockmass movement caused by mining steep metal mine is distinctivly different from coal seam mining.. Existing surface movement laws and deformation prediction methods are not applicable to the rockmass movement caused by mining steep metal mine. So far the home and abroad research to this theory is presently at an early stage, and there isn’t mature theory or practical prediction method, which made a great impact on production. In this paper, the research object—Jinchuan nickel mine, which is typical steep metal mine, characterized by complex geological conditions, developed faults, cracked rockmass, high geostress, and prominent engineering stability problems. In addition, backfill mining method is used in the mine, the features of rockmass movement caused by this mining method are also different from other mining methods. In this paper, the laws of rock mass movement, deformation and destroy mechanism, and its prediction were analyzed based on the collection of data, detailed in-sit engineering geology survey, ground movement monitoring by GPS, theoretical analysis and numerical simulation. According to the GPS monitoring of ground surface movement, ground subsidence basin with apparent asymmetry is developing, the influence scope is larger in the upper faulted block than in the lower faulted block, and the center of ground movement is moving along the upper faulted block direction with increasing depth of mining. During the past half and seven years, the largest settlement has amounted to 1287.5mm, and corresponding horizontal displacement has amounted to 664.6mm. On the ground surface, two fissure belts show a fast-growing trend of closure. To sum up, mining steep metal mine with backfill method also exist the same serious problem of rockmass movement hazards. Fault, as a low intensity zone in rockmass, when it located within the region of mining influence, the change of potential energy mainly consumed in fault deformation associated with rockmass structure surface friction, which is the essence of displacement and stress barrier effects characterized by fault rupture zone. when steep fault located in the tensile deformation region incurred by underground excavation, no matter excavation in hangingwall or in footwall of the fault, there will be additional tensile stress on the vertical fault plane and decrease in the shear strength, and always showing characteristics of normal fault slip, which is the main reason of fault escarpment appeared on the ground surface. The No.14 shaft deformation and failure is triggered by fault activation, which showed with sidewall move, rupture, and break down features as the main form of a concentrated expression of fault effects. The size and orientation of principal stress in surrounding rock changed regularly with mining; therefore, roadway deformation and damage at different stages have different characteristics and distribution models. During the process of mining, low-intensity weak structures surface always showed the most obvious reaction, accompany with surface normal stress decrease and shear strength bring down, to some extent, occurred with relative slide and deformation. Meanwhile, the impact of mining is a relatively long process, making the structure surface effect of roadway deformation and damage more prominent than others under the influence of mining. Roadway surrounding rockmass deformation caused by the change of strain energy density field after excavation mainly belongs to elastic deformation, and the correspondented damage mainly belongs to brittle rupture, in this circumstance, surrounding rockmass will not appear large deformation. The large deformation of surrounding rockmass can only be the deformation associated with structure surface friction or the plastic deformation of itself, which mainly caused by the permanent self-weigh volume force，and long-term effect of mining led to the durability of this deformation Good pitting fill effect and supporting effect of backfill, as well as the friction of rockmass structure surface lead to obvious macro-rockmass movement with long-lag characteristics. In addition, the loss of original intensity and new structure surface arisen increased flexibility in rockmass and fill deformation in structure surface, which made the time required for rockmass potential energy translate into deformation work associated with plastic deformation and structure surface friction consumed much, and to a large extent, eliminated the time needed to do those plastic work during repeated mining, all of which are the fundamental reason of rockmass movement aftereffect more significant than before. Mining steep deposits in high tectonic stress area and in gravity stress area have different movement laws and deformation mechanism. The steep deposit, when the vertical size of the mining areas is smaller than the horizontal size of the orebody, no matter mining in gravity stress area or in high tectonic stress area, they have similar features of ground movement with mining horizontal orebody; contrarily, there will appear double settlement centers on the ground surface under the condition of mining in high tectonic stress area, while there will always be a single center under the other condition. Meanwhile the ground movement lever, scale of mining influence area and macro features of ground movement, deformation and fracture are also different from mining in gravity stress area, and the fundamental reason lies in the impact of orientation of the maximum principal stress on rock movement features in in-site rock stress field. When mining thick and steep deposit, the ground surface movement and deformation characteristic curves are significantly different from excavating the horizontal ore bed and thin steep deposit. According to the features of rockmass movement rate, the development process of mining-induced rockmass movement is divided into three stages: raising stage, steadily stage and gradually decay stage. Considering the actual exploitation situation, GPS monitoring results and macro-characteristics of surface movement, the current subsidence pattern of Jinchuan No.2 mine is in the early stage of development. Based on analysis of surface movement rate, surface subsidence rate increase rapidly when mining in double lever at the same time, and reach its peak until the exploitation model ended. When double lever mining translate into single, production decreased, surface subsidence rate suddenly start to reduce and maintain a relatively low value, and the largest subsidence center will slowly move along with the hangingwall ore body direction with increasing depth of mining, at the same time, the scope and extent of subsidence in footwall ore body will begin magnify, and a sub-settlement center will appear on ground surface, accompanied with the development and closure trend of ground fissure, the surrounding rockmass of shaft and roadway will be confronted to more frequent and severe deformation and failure, and which will have a negative impact on the overall stability of No.2 mine mining. On the premise of continuity of rockmass movement, gray system model can be used in ground rockmass movement prediction for good results. Under the condition of backfill mining step by step, the loose effect of compact status of the hard, broken rockmass led to lower energy release rate, although surrounding rockmass has high elastic energy, loose and damage occurred in the horizontal ore body, which made the mining process safety without any large geological hazards. During the period of mining the horizontal ore body to end, in view of its special “residual support role”, there will be no large scale rockmass movement hazards. Since ground surface movement mainly related to the intensity of mining speed and backfill effect, on the premise of constant mining speed, during the period of mining the horizontal ore body to end, the rate of ground surface rockmass movement and deformation won’t have sudden change.

Receivable Management in Non Banking Finance Companies with Special Reference to Vehicle Financing

In the absence of entry barrier or regulatory restrictions, Non Banking Financial Companies frantically grew and accessed the public deposit without any regulatory control. The deposit of NBFCs grew from Rs. 41.9 crore in 1971 to 53116.0 crore in 1997. This growth was the result of a combined effect of increase in the number of NBFCs and increase in the amount of deposits. The deposits amazed as above was invested in various assets especially that in motor vehicles by these asset financing NBFCs. Various tactics were adopted by these NBFCs and their agents for recovering the receivable outstanding from such assets. Both central government and RBI were concerned about the protection of depositors‘ interest and various committees were set up to frame a comprehensive regulation for the functioning of these NBFCs.

Estrutura de capital, estratégia e competição de mercado na indústria de gás liquefeito de petróleo (GLP) no período 1995-2003

A indústria brasileira de gás liquefeito de petróleo, GLP, tem sido alvo freqüente, nos últimos anos, da atenção de órgãos reguladores, mídia e público em geral. Muitas têm sido as especulações a respeito de seu padrão de conduta publicados na imprensa, variando desde práticas predatórias até a formação disciplinada de cartel. A presente pesquisa, baseada em depoimentos de executivos da indústria e no acesso a dados das firmas dessa indústria tomado públicos - dados financeiros e operacionais - explora qual seja, afinal, o padrão de competição desse oligopólio. O estudo parte da Teoria da Estrutura de Capital aplicada para decisões de competição e mercado - preços e quantidades a ofertar para constatar que, dadas suas escolhas de estrutura de capital, as firmas esta indústria específica simplesmente adotam um padrão tradicional de arrefecimento da competição a partir de sua dívida. A dívida, nesta indústria, é utilizada para a criação de barreiras de entrada. Ainda assim, casos de acirramento da competição e de concentração de mercado foram encontrados, indicando que não haja uma disciplina formal de conduta por parte de suas firmas as quais devem, eventualmente, encontrar dificuldades - ou falta de interesse - na convivência em um mercado em fase de transformação.

The effect of chloride ions and A. ferrooxidans on the oxidative dissolution of the chalcopyrite evaluated by electrochemical noise analysis (ENA)

It is believed that the dissolution of chalcopyrite (CuFeS2) in acid medium can be accelerated by the addition of Cl- ions, which modify the electrochemical reactions in the leaching system. Electrochemical noise analysis (ENA) was utilized to evaluate the effect of the Cl- ions and Acidithiobacillus ferrooxidans on the oxidative dissolution of a CPE-chalcopyrite (carbon paste electrode modified with chalcopyrite) in acid medium. The emphasis was on the analysis of the admittance plots (Ac) calculated by ENA. In general, a stable passive behavior was observed, mainly during the initial stages of CPE-chalcopyrite immersion, characterized by a low passive current and a low dispersion of the Ac plots, mainly after bacteria addition. This can be explained by the adhesion of bacterial cells on the CPE-chalcopyrite surface acting as a physical barrier. The greater dispersions in the Ac plots occurred immediately after the Cl- ions addition, in the absence of bacteria characterizing an active-state. In the presence of bacteria the addition of Clions only produced some effect after some time due to the barrier effect caused by bacteria adhesion. © (2009) Trans Tech Publications.

Complex mixed state of the Pauli-limited superconductor CeCoIn5

Magnetization measurements were performed on CeCoIn5 at temperatures down to 20 mK and magnetic fields up to 17 T applied along different crystallographic orientations. For field configurations nearly parallel to the ab plane (theta less than or similar to 40 degrees and T <= 50 mK), we have found an intriguing vortex dynamics regime revealed by a hysteretic and metastable anomalous peak effect (APE), which gives evidence of surface barrier effects enhanced by antiferromagnetic fluctuations in the mixed state of CeCoIn5. Furthermore, we have observed crossover features in the torque and magnetization traces at fields below H-c2, which are consistent with vortices lattice phase transitions and with the anomalies speculated to be the Fulde-Ferrel-Larkin-Ovchinnikov (FFLO) superconducting state in CeCoIn5. All of the above features were found to be dramatically perturbed in Ce0.98Gd0.02CoIn5.

Influence of the relative amounts of crystalline and amorphous phases on the mechanical properties of polyamide-6 nanocomposites

The relative amounts of amorphous and crystalline ?- and a-phases in polyamide-6 nanocomposites, estimated from the deconvolution of X-ray diffraction peaks using Gaussian functions, correlates with their mechanical, thermomechanical, and barrier properties. The incorporation of organoclay platelets (Cloisite 15A and 30B) induced the crystallization of the polymer in the ? form at expense of the amorphous phase, such that 12 wt % of Cloisite is enough to enhance the mechanical and the thermomechanical properties. However, higher nanofiller loads were necessary to achieve good barrier effects, because this property is mainly dependent on the tortuous path permeation mechanism of the gas molecules through the nanocomposite films. (C) 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012

Enabling knowledge creation through outsiders: towards a push model of open innovation

Open innovation is increasingly being adopted in business and describes a situation in which firms exchange ideas and knowledge with external participants, such as customers, suppliers, partner firms, and universities. This article extends the concept of open innovation with a push model of open innovation: knowledge is voluntarily created outside a firm by individuals and organisations who proceed to push knowledge into a firm’s open innovation project. For empirical analysis, we examine source code and newsgroup data on the Eclipse Development Platform. We find that outsiders invest as much in the firm’s project as the founding firm itself. Based on the insights from Eclipse, we develop four propositions: ‘preemptive generosity’ of a firm, ‘continuous commitment’, ‘adaptive governance structure’, and ‘low entry barrier’ are contexts that enable the push model of open innovation.

Diversities and Disparities among Female-Headed Households in Rural Malawi

Using data obtained from a survey carried out in six villages in various parts of rural Malawi, this paper examines some of the main characteristics of female-headed households. In the study villages, most female-headed households are in a disadvantageous position relative to their male counterparts in terms of labour endowment, farm size, and agricultural productivity. The high cost of inputs, especially of fertilizer, prevents resource-poor female-headed households from improving maize self-sufficiency through increased productivity and from engaging in high-return agriculture such as tobacco production. The paper also shows that there are marked disparities within the category of female-headed households. Factors that enable some female-headed households to achieve high income include the availability of high-return nonfarm income opportunities, use of social networks to obtain labour and income opportunities, land acquisition through flexible applications of inheritance rules, and the existence of informal tobacco marketing. Livelihood diversification is adopted by both male- and female-headed households, but many of the female-headed households engage in low-return and low-entry-barrier activities such as agricultural wage labour. On the other hand, the high off-farm income in the wealthier female-headed households enables them to purchase fertilizer for own-farm production, contributing to an improvement in productivity and resultant increases in their total income.