Influence of specimens' design and manufacturing process on microtensile bond strength to enamel: laboratory and FEA comparison

This study evaluated the effect of specimens' design and manufacturing process on microtensile bond strength, internal stress distributions (Finite Element Analysis - FEA) and specimens' integrity by means of Scanning Electron Microscopy (SEM) and Laser Scanning Confocal Microscopy (LCM). Excite was applied to flat enamel surface and a resin composite build-ups were made incrementally with 1-mm increments of Tetric Ceram. Teeth were cut using a diamond disc or a diamond wire, obtaining 0.8 mm² stick-shaped specimens, or were shaped with a Micro Specimen Former, obtaining dumbbell-shaped specimens (n = 10). Samples were randomly selected for SEM and LCM analysis. Remaining samples underwent microtensile test, and results were analyzed with ANOVA and Tukey test. FEA dumbbell-shaped model resulted in a more homogeneous stress distribution. Nonetheless, they failed under lower bond strengths (21.83 ± 5.44 MPa)c than stick-shaped specimens (sectioned with wire: 42.93 ± 4.77 MPaª; sectioned with disc: 36.62 ± 3.63 MPa b), due to geometric irregularities related to manufacturing process, as noted in microscopic analyzes. It could be concluded that stick-shaped, nontrimmed specimens, sectioned with diamond wire, are preferred for enamel specimens as they can be prepared in a less destructive, easier, and more precise way.

Using perspective schema and a reference model to design the ETL process

Dissertação apresentada para a obtenção do Grau de Doutor em Informática

Rethinking construction: the Generic Design and Construction Process Protocol

The complexity of construction projects and the fragmentation of the construction industry undertaking those projects has effectively resulted in linear, uncoordinated and highly variable project processes in the UK construction sector. Research undertaken at the University of Salford resulted in the development of an improved project process, the Process Protocol, which considers the whole lifecycle of a construction project whilst integrating its participants under a common framework. The Process Protocol identifies the various phases of a construction project with particular emphasis on what is described in the manufacturing industry as the ‘fuzzy front end’. The participants in the process are described in terms of the activities that need to be undertaken in order to achieve a successful project and process execution. In addition, the decision-making mechanisms, from a client perspective, are illustrated and the foundations for a learning organization/industry are facilitated within a consistent Process Protocol.

Systemförvaltning hos Banverket – design av gemensam process för ändringshantering

Vår uppdragsgivare för detta arbete var IT-avdelningen på Banverkets huvudkontor. Deras upp-drag till oss var att kartlägga nuläget i ändringshanteringen i systemförvaltningen. Utifrån den kartläggningen skulle vi även utveckla en gemensam process med tillhörande processbeskrivning för ändringshanteringen. Ändringshantering är alla de aktiviteter som uppstår från det att ett förändringsbehov inkommer till dess att förändringen är införd. Banverket har under 2003 arbetat fram en metodik för systemförvaltning, som fortfarande är under utveckling. Metodikens stöd för det operativa arbetet, i synnerhet ändringshanteringen, är inte tillräcklig. Förvaltningsledare har hittills skapat sina egna processer kring hur ändringshan-teringen ska gå till och de finns inte dokumenterade, utan existerar som enskild kunskap. Detta leder till att systemförvaltningen blir personbunden och konsekvensen blir bland annat att det är resurskrävande att byta ut personen i förvaltningen samt att det tar längre tid vid överlämning av förvaltningen till ny person. Vi genomförde semistrukturerade intervjuer med nio systemförvaltare och förvaltningsledare för att kunna beskriva deras arbetssätt i nuläget. Till hjälp i beskrivningen av arbetssättet använde vi handlingsgrafer enligt metoden FA/SIM. Med handlingsgraferna kunde vi jämföra de olika arbetssätten. Vid jämförelsen kunde vi se att det fanns ett antal handlingar som är återkommande i de flesta nulägesbeskrivningarna. Vi analyserade dessa handlingar med hjälp av affärsaktsteorin för att få svar på om ändringshanteringen är affärstydlig. Vi kunde se att förvaltningsledarna saknar ett bra stöd för vilken information som bör komma in med varje förändringsbehov. Detta leder till att förvaltningsledaren känner en osäkerhet i om den prioriterat rätt och kan leda till att han/hon hamnar i ett underläge i en eventuell förhandling med leverantören. I acceptanstestningen märkte vi att den inte utförs på ett strukturerat sätt samt att det finns en tendens till att förvaltningsledaren i vissa fall förlitar sig på den testning leverantören utför. Den ändringshanteringsprocess vi utvecklat är en grund till ett gemensamt arbetssätt, men en viss fördjupning av detaljnivån i processen måste ske mot varje förvaltningsobjekt. Vi menar att för att säkerställa att rätt och jämförbar information om de olika förändringsbehoven kommer in behöver förvaltningsledaren arbeta fram någon form av frågemall. Genom att genomföra en nyt-tovärdering enligt PENG-modellen tror vi att förvaltningsledaren hittar de frågor som han/hon behöver ha svar på i prioriteringsfasen och som bör ingå i frågemallen. Acceptanstestningen bör ske på ett strukturerat sätt och vi föreslår att förvaltningsledaren arbetar fram ett testprotokoll för sitt förvaltningsobjekt samt identifierar några för verksamheten kritiska funktionaliteter som också bör ingå i testprotokollet.

Revisiting the stability and growth pact: grand design or internal adjustment?

Includes bibliography

Report of the Commissioners appointed in 1898 to inquire and report what methods of treating and disposing of sewage (including any liquid from any factory or manufacturing process) may properly be adopted.

Mode of access: Internet.

INTIMATE APPAREL: AN EXPLORATION OF COSTUME DESIGN IDEAS AND PROCESS FOR THE UNIVERSITY OF MARYLAND’S DEPARTMENT OF THEATRE, DANCE AND PERFORMING 2015 PRODUCTION

The following thesis navigates the primary artistic concept, design process and execution of Marchlena Rodgers’ costume design for the University of Maryland’s production of Intimate Apparel. Intimate Apparel opened October 9, 2015 in the University of Maryland’s Kay Theatre. The piece was written by Lynn Nottage directed by Jennifer Nelson. The set was designed by Lydia Francis, Lighting was designed by Max Doolittle.

Simultaneous steady state and dynamic design of process systems using structural indicators

The simultaneous design of the steady-state and dynamic performance of a process has the ability to satisfy much more demanding dynamic performance criteria than the design of dynamics only by the connection of a control system. A method for designing process dynamics based on the use of a linearised systems' eigenvalues has been developed. The eigenvalues are associated with system states using the unit perturbation spectral resolution (UPSR), characterising the dynamics of each state. The design method uses a homotopy approach to determine a final design which satisfies both steady-state and dynamic performance criteria. A highly interacting single stage forced circulation evaporator system, including control loops, was designed by this method with the goal of reducing the time taken for the liquid composition to reach steady-state. Initially the system was successfully redesigned to speed up the eigenvalue associated with the liquid composition state, but this did not result in an improved startup performance. Further analysis showed that the integral action of the composition controller was the source of the limiting eigenvalue. Design changes made to speed up this eigenvalue did result in an improved startup performance. The proposed approach provides a structured way to address the design-control interface, giving significant insight into the dynamic behaviour of the system such that a systematic design or redesign of an existing system can be undertaken with confidence.

Computational studies for the design of process equipment with complex geometries

This study combines several projects related to the flows in vessels with complex shapes representing different chemical apparata. Three major cases were studied. The first one is a two-phase plate reactor with a complex structure of intersecting micro channels engraved on one plate which is covered by another plain plate. The second case is a tubular microreactor, consisting of two subcases. The first subcase is a multi-channel two-component commercial micromixer (slit interdigital) used to mix two liquid reagents before they enter the reactor. The second subcase is a micro-tube, where the distribution of the heat generated by the reaction was studied. The third case is a conventionally packed column. However, flow, reactions or mass transfer were not modeled. Instead, the research focused on how to describe mathematically the realistic geometry of the column packing, which is rather random and can not be created using conventional computeraided design or engineering (CAD/CAE) methods. Several modeling approaches were used to describe the performance of the processes in the considered vessels. Computational fluid dynamics (CFD) was used to describe the details of the flow in the plate microreactor and micromixer. A space-averaged mass transfer model based on Fick’s law was used to describe the exchange of the species through the gas-liquid interface in the microreactor. This model utilized data, namely the values of the interfacial area, obtained by the corresponding CFD model. A common heat transfer model was used to find the heat distribution in the micro-tube. To generate the column packing, an additional multibody dynamic model was implemented. Auxiliary simulation was carried out to determine the position and orientation of every packing element in the column. This data was then exported into a CAD system to generate desirable geometry, which could further be used for CFD simulations. The results demonstrated that the CFD model of the microreactor could predict the flow pattern well enough and agreed with experiments. The mass transfer model allowed to estimate the mass transfer coefficient. Modeling for the second case showed that the flow in the micromixer and the heat transfer in the tube could be excluded from the larger model which describes the chemical kinetics in the reactor. Results of the third case demonstrated that the auxiliary simulation could successfully generate complex random packing not only for the column but also for other similar cases.

The Role of networks in the internationalization process of Finnish design companies

Finnish design has attracted global attention lately and companies within the industry have potential in international markets. Because networks have been found to be extremely helpful in a firm’s international business operations and usefulness of networks is not fully exploited, their role in Finnish design companies is investigated. Accordingly, this study concentrates on understanding the role of networks in the internationalization process of Finnish design companies. This was investigated through describing the internationalization process of Finnish design companies, analyzing what kind of networks are related to internationalization process of Finnish design companies, and analyzing how networks are utilized in the internationalization process of Finnish design companies. The theoretical framework explores the Finnish design industry, internationalization process and networks. The Finnish design industry is introduced in general and the concept of design is defined to refer to the industries of textiles, furniture, clothing, and lighting equipment in the research. The theories of internationalization process, the Uppsala model and Luostarinen’s operation modes, are explored in detail. The Born Global theory, which is a contrary view to stage models, is also discussed. The concept of network is investigated, networks are classified into business and social networks, and network approach to internationalization is discussed. The research is conducted empirically and the research method is a descriptive case study. In this study, four case companies are investigated: the interior decoration unit of L-Fashion Group, Globe Hope, Klo Design, and Melaja Ltd. Data is collected by semi-structured interviews and the analysis is done in the following way: the case companies are introduced, their internationalization processes and networks are described and, finally, the comparison of the case companies is done in a form of cross-case analysis. This research showed that cooperation with social networks, such as locals or employees who have experience from the target market can be extremely helpful in the beginning of a Finnish design company’s internationalization process. This study also indicated that public organizations do not necessarily enhance the internationalization process in a design company point-of-view. In addition, the research showed that there is cooperation between small Finnish design companies whereas large design companies are not as open to cooperation with competitors.

Life Cycle Assessment (LCA) Applied to the Design of an Innovative Drying Process for Sewage Sludge

Most adverse environmental impacts result from design decisions made long before manufacturing or usage. In order to prevent this situation, several authors have proposed the application of life cycle assessment (LCA) at the very first phases of the design of a process, a product or a service. The study in this paper presents an innovative thermal drying process for sewage sludge called fry-drying, in which dewatered sludge is directly contacted in the dryer with hot recycled cooking oils (RCO) as the heat medium. Considering the practical difficulties for the disposal of these two wastes, fry-drying presents a potentially convenient method for their combined elimination by incineration of the final fry-dried sludge. An analytical comparison between a conventional drying process and the new proposed fry-drying process is reported, with reference to some environmental impact categories. The results of this study, applied at the earliest stages of the design of the process, assist evaluation of the feasibility of such system compared to a current disposal process for the drying and incineration of sewage sludge.