Bronzi e bronzi dorati esposti all’azione della pioggia: corrosione ed inibizione

Il presente lavoro di tesi è stato organizzato in tre parti principali: in prima analisi, è stato effettuato uno studio preliminare di patine reali prelevate da bronzi esposti all’aperto, al fine di verificare l’ipotesi che diverse geometrie di esposizione generano patine differenti nella morfologia e nella composizione sulla superficie della lega. In particolare, è stata posta l’attenzione sullo Sn, il quale esibisce un differente comportamento in aree esposte o riparate dalla pioggia battente. Successivamente quindi, mediante una prova di invecchiamento accelerato che riproduce l’azione della pioggia battente (dropping test) è stata quindi studiata l’efficienza dell’inibitore PropS-SH (3-mercapto-propil-trimetossi-silano), il quale si è dimostrato un possibile sostituto del BTA nell’inibizione della corrosione dei bronzi e tra i primi candidati nello studio dell’inibizione della corrosione nei bronzi dorati. Lo studio è stato effettuato impiegando il dropping test sia per la pre-patinazione (in modo da produrre un substrato rappresentativo di quello su cui si applica l’inibitore) che per l’esposizione vera e propria. I risultati ottenuti sono stati poi confrontati con quelli ottenuti in un lavoro precedente, in cui è stata studiata l’efficienza dello stesso inibitore in condizioni che simulano invece l’azione della pioggia stagnante. Infine, sono stati condotti studi preliminari sulla corrosione di campioni di bronzo dorato mediante invecchiamento accelerato in condizioni che simulano sia la pioggia battente che quella stagnante (wet&dry test).

Preparation, characterization and quantized capacitance of 3-mercapto-1,2-propanediol monolayer protected gold nanoparticles

Monolayer protected gold nanoparticles (MPCs) are the focus of recent research for their stability and are deemed as the building blocks of bottom-up strategies. In this Letter, 3-mercapto-1,2-propanediol monolayer protected gold nanoparticles (MPD-MPCs) were synthesized and characterized by transmission electron microscopy, UV/Vis spectroscopy, X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy. The value of quantized double-layer capacitance (1.13 aF) of MPD-MPCs in aqueous media was obtained by differential pulse voltammograms.

Síntese, caracterização e propriedades do polímero cloreto de 3-n-propil-1-azônia-4-azabiciclo[2.2.2]octano silsesquioxano

Neste trabalho encontra-se descrita a síntese do polímero híbrido organo inorgânico, cloreto de 3-n-propil-1-azônia-4-azabiciclo [2.2.2] octano silsesquioxano (dabcosilsesquioxano), através do método sol-gel. O polímero foi obtido por reação entre o precursor orgânico cloreto de 3-n-propiltrimetoxisilano-1-azônia-4-azabiciclo[2.2.2]octano (dabcosil), obtido em nosso laboratório, e o precursor inorgânico tetraetilortosilicato (TEOS) usando relações molares TEOS/dabcosil de 0 até 49, em meio ácido (pH entre 3 e 4). A caracterização destes materiais, realizada por espectroscopia no infravermelho e por análise termogravimétrica, comprovou que são materiais híbridos e que eles apresentam uma estabilidade térmica até 300ºC. Os polímeros com alto grau de conteúdo orgânico mostraram-se solúveis em água e foram facilmente depositados sobre matrizes de sílica, alumina e sílica modificada com um filme de óxido de alumínio (Al/SiO2). Estudos da lixiviação dos polímeros em água, nestas matrizes, mostraram que os mesmos tem melhor aderência na matriz de Al/SiO2. O polímero dabcosilsesquioxano com relação molar TEOS/dabcosil 0,33 impregnado na matriz Al/SiO2 foi usado como adsorvente para CuCl2, ZnCl2 e CdCl2 em solução etanólica, sendo que a capacidade de adsorção dos cloretos metálicos seguiu a ordem CdCl2 > ZnCl2 > CuCl2. A seletividade para a adsorção dos íons metálicos, em situação competitiva, também foi estudada. Os melhores resultados foram encontrados para o cádmio. Os materiais híbridos com menor grau de incorporação orgânica, mostraram-se insolúveis em água. A morfologia destes polímeros foi estudada através da microscopia eletrônica de varredura e de isotermas de adsorção e dessorção de nitrogênio, sendo então obtidas a área superficial específica, a distribuição de tamanho de poros e uma estimativa do tamanho médio de partículas. Um estudo exploratório da potencialidade destes materiais como adsorventes de cátions cádmio em solução aquosa mostrou resultados muito positivos.

Corrosione atmosferica in area urbana-costiera di un acciaio Cor-Ten: studio del rilascio in ambiente dei metalli di lega

Cor-Ten is a particular kind of steel, belonging to low-alloyed steel; thanks to his aesthetic features and resistance to atmospheric corrosion, this material is largely used in architectural, artistic and infrastructural applications. After environmental exposure, Cor-Ten steel exhibits the characteristic ability to self-protect from corrosion, by the development of a stable and adherent protective layer. However, some environmental factors can influence the formation and stability of the patina. In particular, exposure of Cor-Ten to polluted atmosphere (NOx, SOx, O3) or coastal areas (marine spray) may cause problems to the protective layer and, as a consequence, a release of alloying metals, which can accumulate near the structures. Some of these metals, such as Cr and Ni, could be very dangerous for soils and water because of their large toxicity. The aim of this work was to study the corrosion behavior of Cor-Ten exposed to an urban-coastal site (Rimini, Italy). Three different kinds of commercial surface finish (bare and pre-patinated, with or without a beeswax covering) were examined, both in sheltered and unsheltered exposure conditions. Wet deposition brushing the specimens surface (leaching solutions) are monthly collected and analyzed to evaluate the extent of metal release and the form in which they leave the surface, for example, as water-soluble compounds or non-adherent corrosion products. Five alloying metals (Fe, Cu, Cr, Mn and Ni) and nine ions (Cl-, NO3-, NO2-, SO42-, Na+, Ca2+, K+, Mg2+, NH4+) are determined through Atomic Absorption Spectroscopy and Ion Chromatography, respectively. Furthermore, the evolution and the behaviour of the patina are periodically followed by surface investigations (SEM-EDS and Raman Spectroscopy). After two years of exposure, the results show that Bare Cor-Ten, cheaper than the other analyzed specimens, even though undergoes the greater mass variation, his metal release is comparable to the release of the pre-patinated samples. The behavior of pre-patinated steel, with or without beeswax covering, do not show particular difference. This exposure environment doesn’t allow a completely stabilization of the patina; nevertheless an estimate of metal release after 10 years of exposure points out that the environmental impact of Cor-Ten is very low: for example, the release of chromium in the soluble fraction is less than 10 mg if we consider an exposed wall of 10 m2.

Test and development of microcapsules for rigid polyurethane foam

Tese de mestrado em Química Tecnológica, apresentada à Universidade de Lisboa, através da Faculdade de Ciências, 2016

Untersuchungen zur stereokontrollierten Synthese von 3-Mercaptolysinderivaten und Untersuchungen zur Synthese von Ansa-Seco-Steroiden

Untersuchungen zur stereokontrollierten Synthese von 3-Mercaptolysinderivaten: 3-Mercaptolysin und Peptide mit einer 3-Mercaptolysin-Einheit sind als Liganden für Nukleardiagnostika in der Kontrastmittelforschung von großem Interesse. Für das Screening Gewebe-selektiver Diagnostika sollten Mercaptolysinderivate, die sich für den Einbau in Peptide eignen, stereokontrolliert aufgebaut werden. Als Grundlage wurde im Rahmen dieser Arbeit eine sehr effiziente Synthese von Methoxymethyl-(4-oxo-butyl)-carbaminsäure-tert-butylester aus Pent-4-en-1-ol entwickelt. Nach Olefinierung des Aldehyds konnten Auxiliar-substituierte 6-Amino-hexensäure-derivate in guten Ausbeuten erhalten werden. Diese bildeten die Startmaterialien für auxiliargesteuerte Aziridinierungen mit anschließender Ringöffnung durch Schwefel-Nukleophile. Zudem wurden Azidierungen an Auxiliar-bewehrten Substraten, Michael-Additionen von Schwefel-Nukleophilen an Dehydroaminosäuren und viele weitere Reaktionen untersucht. Es galt dabei auf patentrechtlich geschützte Reaktionen zu verzichten, weil die Produkte ggf. in großem Maßstab kommerziell genutzt werden sollen. Dabei konnten alle vier stereoisomeren 2-Acetylamino-6-(tert-butoxycarbonyl-methoxymethyl-amino)-3-(4-methoxy-benzylsulfanyl)-hexansäurementhylester in guter Ausbeute synthetisiert werden. Nach Herstellung größerer Mengen der entsprechenden am Schwefelatom ungeschützten N-Fmoc-Aminosäurederivate sollen alle vier Stereoisomere in Peptide eingebaut und auf ihre Eignung als Liganden in Nukleardiagnostika untersucht werden. Untersuchungen zur Synthese neuartiger Ansa-Steroide: Über die Synthese von Ansa-Seco-Steroiden mittels eine Kaskade von intermolekularer Diels-Alder-Reaktion und anschließender Retro-Diels-Alder-Reaktion an 5,6,7,8-Tetradehydrosteroiden wurde erstmals 1986 von E. Winterfeldt et al. berichtet. Die damit eröffnete Möglichkeit eines völlig neuen Zugangs zu pharmakologisch interessanten Makrolid-Substraten konnte aber bislang nicht effektiv genutzt werden, weil insbesondere im Zusammenhang mit der Diels-Alder-Reaktion erhebliche präparative Probleme auftraten: Brauchbare Reaktivität nur bei sehr wenigen Dienophilen, Regioselektivitätsprobleme, etc. Hier galt es zu untersuchen, inwiefern sich diese Probleme durch die intramolekulare Reaktionsführung der Cycloaddition unterdrücken lassen können. Für die intramolekulare Diels-Alder-Reaktion zwischen der 5,7-Dien-Einheit des Steroids und einer an das Substrat gebundenen Dienophil-Einheit ist die Möglichkeit einer günstigen Anordnung der beiden Reaktanden-Gruppen entscheidend. Dafür wurden umfangreiche Untersuchungen zur alpha-konfigurierten Anbindung eines Dienophils in die 3-Position an 3-Hydroxy-5,6,7,8-Tetradehydrosteroiden durchgeführt: Mitsunobu-Reaktionen, Oxidations-Reduktions-Sequenzen, Oxidations-Ketalisierungs-Sequenzen, etc. Hierbei wurden zahlreiche neue Steroide synthetisiert. Es gelang jedoch nicht, 5,6,7,8-Tetradehydrosteroide mit axial in Position 3 eingebundenen Dienophilen in präparativ nutzbaren Mengen zu synthetisieren. Bei der Untersuchung intermolekularer Diels-Alder-Reaktionen zwischen Ergosterol und Brommaleinsäureanhydrid wurde vorzugsweise die Bildung der Addukte des 7,8,14,15-Tetradehydroisomers des Ergosterols beobachtet.

Strategie di conservazione per bronzi esposti all'aperto: studio di metodologie di pulitura, patinazione e consolidamento

Con l’aumento dell’acidità e degli inquinanti nelle deposizioni umide, la corrosione atmosferica dei bronzi esposti all’aperto è stata accelerata e la stabilità della patina di prodotti di alterazione, che solitamente protegge parzialmente il substrato metallico, risulta compromessa. La patina costituisce il supporto reale nelle condizioni d’impiego dell’inibitore o del protettivo, il quale viene applicato in seguito ad una pulitura del manufatto corroso che non espone il metallo nudo. L’inibitore attualmente più utilizzato, benzotriazolo (BTA), risulta non totalmente adeguato nei confronti del bronzo, tossico per l’ambiente e sospetto cancerogeno per l’uomo. Occorre quindi sviluppare soluzioni alternative per la conservazione dei bronzi all’aperto: a questo scopo, il presente lavoro di tesi si è sviluppato in tre fasi: (i) patinazione via invecchiamento artificiale accelerato, simulando la pioggia battente (dropping test) e la pioggia stagnante (wet&dry) su campioni di bronzo quaternario Cu-Sn-Zn-Pb, al fine di produrre un substrato rappresentativo, diversificando le patine prodotte dalle due geometrie di esposizione, sul quale possa essere applicato un inibitore o protettivo. La patinazione artificiale ha permesso di riprodurre efficacemente le due tipologie di patine naturali: le superfici patinate in pioggia battente hanno mostrato il tipico arricchimento in Stagno dovuto alla decuprificazione, mentre le superfici patinate in pioggia stagnante hanno presentato la comparsa dei tipici prodotti precursori dei solfati basici. (ii) pulitura di una patina naturale su bronzo quaternario (fontana del XVII sec.) mediante sabbiatura criogenica (dry-ice blasting), al fine di verificare l’efficienza di questa tecnica per preparare le superfici patinate all’applicazione di un inibitore o protettivo e il suo eventuale utilizzo in sostituzione alle tecniche tradizionali. La sabbiatura criogenica si è tuttavia dimostrata non selettiva nei confronti dei depositi calcarei, dimostrandosi non utilmente applicabile. (iii) protezione di superfici di bronzo quaternario, patinate artificialmente simulando la pioggia battente, mediante un trattamento innovativo di biopatinazione ottenuto applicando il ceppo fungino Beauveria Bassiana, potenzialmente in grado di convertire in ossalati i prodotti di corrosione della patina naturale. Lo scopo è quello di valutare l’efficienza protettiva della biopatina in seguito ad un invecchiamento accelerato simulante la pioggia battente. La biopatinazione è risultata applicabile anche a superfici arricchite in Stagno artificialmente (dropping test), ma la biopatina ottenuta non si è mostrata in grado di limitare i fenomeni corrosivi. Si ritengono necessarie ulteriori prove per valutarne l’efficienza a più lungo termine.

Photoinduced DNA and Protein Cleavage Activity of Ferrocene-Conjugated Ternary Copper(II) Complexes

Ferrocene-conjugated ternary copper(II) complexes [Cu(L)(B)](ClO4)(2), where L is FcCH(2)N(CH2Py)(2) (Fc = (eta(5)-C5H4)Fe-II(eta(5)-C5H5)) and B is a phenanthroline base, viz., 2,2'-bipyridine (bpy, 1), 1, 10-phenanthroline (phen, 2), dipyrido[3,2-d:2',3'-f]quinoxaline (dpq, 3), and dipyrido[3,2-a:2',3'-c]phenazine (dppz, 4), have been synthesized and characterized by various spectroscopic and analytical techniques. The bpy complex 1, as its hexafluorophosphate salt, has been structurally characterized by X-ray crystallography. The molecular structure shows the copper(II) center having an essentially square-pyramidal coordination geometry in which L with a pendant ferrocenyl (Fc) moiety and bpy show respective tridentate and bidentate modes of binding to the metal center. The complexes are redox active, showing a reversible cyclic voltammetric response of the Fc(+)-Fc couple near 0.5 V vs SCE and a quasi-reversible Cu(II)-Cu(I) couple near 0.0 V. Complexes 2-4 show binding affinity to calf thymus (CT) DNA, giving binding constant (K-b) values in the range of 4.2 x 10(4) to 2.5 x 10(5) M-1. Thermal denaturation and viscometric titration data suggest groove binding and/or a partial intercalative mode of binding of the complexes to CT DNA. The complexes show good binding propensity to the bovine serum albumin (BSA) protein, giving K-BSA values of similar to 10(4) M-1 for the bpy and phen complexes and similar to 10(5) M-1 for the dpq and dppz complexes. Complexes 2-4 exhibit efficient chemical nuclease activity in the presence of 3-mercapto-propionic acid (MPA) as a reducing agent or hydrogen peroxide (H2O2) as an oxidizing agent. Mechanistic studies reveal formation of hydroxyl radicals as the reactive species. The dpq and dppz complexes are active in cleaving supercoiled (SC) pUC19 DNA on photoexposure to visible light of different wavelengths including red light using an argon-krypton mixed gas ion laser. Mechanistic investigations using various inhibitors reveal the fort-nation of hydroxyl radicals in the DNA photocleavage reactions. The dppz complex 4, which shows efficient photoioduced BSA cleavage activity, is a potent multifunctional model nuclease and protease in the chemistry of photodynamic therapy (PDT) of cancer.

Photochemistry of dimethylthioketene dimers

Thioketones and dithioesters, using 1,3-cyclobutanedithione and 3-mercapto-2,2,4-trimethyldithio-3-pentenoic acid B-thiolactone as models are found to undergo a-cleavage to give the diradical and carbene as reactive intermediates.

Photofragmentation Reactions Of Thiocarbonyl Compounds

Preferential yield of ring expansion and rearrangement products through α-cleavage of tetramethyl-3-thio-1,3-cyclobutanedione (1) and 3-mercapto-2,2,4-trimethyl-3-pentenoic acid β-(thio lactone) (2) involving diradical and carbene has been observed upon photolysis of 1 and 2.

Multilayer assemblies of polyelectrolyte-gold nanoparticles for the electrocatalytic oxidation and detection of arsenic(III)

Multilayers of poly(diallyldimethylammonium chloride) (PDDA) and citrate capped Au nanoparticles (AuNPs) anchored on sodium 3-mercapto-1-propanesulfonate modified gold electrode by electrostatic layer-by-layer assembly (LbL) technique are shown to be an excellent architecture for the direct electrochemical oxidation of As(III) species. The growth of successive layers in the proposed LbL architecture is followed by atomic force microscopy, UV-vis spectroscopy, quartz crystal microbalance with energy dissipation, and electrochemistry. The first bilayer is found to show rather different physico-chemical characteristics as compared to the subsequent bilayers, and this is attributed to the difference in the adsorption environments. The analytical utility of the architecture with five bilayers is exploited for arsenic sensing via the direct electrocatalytic oxidation of As(III), and the detection limit is found to be well below the WHO guidelines of 10 ppb. When the non-redox active PDDA is replaced by the redoxactive Os(2,2'-bipyridine)(2)Cl-poly(4-vinylpyridine) polyelectrolyte (PVPOs) in the LbL assembly, the performance is found to be inferior, demonstrating that the redox activity of the polyelectrolyte is futile as far as the direct electro-oxidation of As(III) is concerned. (C) 2012 Elsevier Inc. All rights reserved.

Quartz crystal microbalance monitoring of density changes in mesoporous TiO2 phytate films during redox and ion exchange processes

Nanofilm deposits of TiO2 nanoparticle phytates are formed on gold electrode surfaces by 'directed assembly' methods. Alternate exposure of a 3-mercapto-propionic acid modified gold surface to (i) a TiO2 sol and (ii) an aqueous phytic acid solution (pH 3) results in layer-by-layer formation of a mesoporous film. Ru(NH3)(6)(3+) is shown to strongly adsorb/accumulate into the mesoporous structure whilst remaining electrochemically active. Scanning the electrode potential into a sufficiently negative potential range allows the Ru(NH3)(6)(3+) complex to be reduced to Ru(NH3)(6)(2+) which undergoes immediate desorption. When applied to a gold coated quartz crystal microbalance (QCM) sensor, electrochemically driven adsorption and desorption processes in the mesoporous structure become directly detectable as a frequency response, which corresponds directly to a mass or density change in the membrane. The frequency response (at least for thin films) is proportional to the thickness of the mass-responsive film, which suggests good mechanical coupling between electrode and film. Based on this observation, a method for the amplified QCM detection of small mass/density changes is proposed by conducting measurements in rigid mesoporous structures. (C) 2003 Elsevier Science B.V. All rights reserved.

Synthesis of thiolated and acrylated nanoparticles using thiol-ene click chemistry: towards novel mucoadhesive materials for drug delivery

Thiol- and acrylate-functionalized nanoparticles have been synthesized from pentaerythritol tetrakis(3-mercapto-propionate) and pentaerythritol tetraacrylate using thiol-ene click chemistry. Using Raman and 1H NMR spectroscopy as well as Ellman's assay, it was demonstrated that excess pentaerythritol tetraacrylate in the feed mixture led to nanoparticles with free acrylate groups on their surface, whereas nanoparticles with thiolated surfaces could be synthesized using feed mixtures with excess pentaerythritol tetrakis(3-mercapto-propionate). The possibility of fluorescent labelling of thiolated nanoparticles has been demonstrated through their reaction with fluorescein-5-maleimide. The thiolated nanoparticles were found to be mucoadhesive and exhibited retention on mucosal surface of porcine urinary bladder.

Desenvolvimento de nanosistemas farmacêuticos para terapia gênica

Gene therapy is one of the major challenges of the post-genomic research and it is based on the transfer of genetic material into a cell, tissue or organ in order to cure or improve the patient s clinical status. In general, gene therapy consists in the insertion of functional genes aiming substitute, complement or inhibit defective genes. The achievement of a foreigner DNA expression into a population of cells requires its transfer to the target. Therefore, a key issue is to create systems, vectors, able to transfer and protect the DNA until it reaches the target. The disadvantages related to the use of viral vectors have encouraged efforts to develop emulsions as non-viral vectors. In fact, they are easy to produce, present suitable stability and enable transfection. The aim of this work was to evaluate two different non-viral vectors, cationic liposomes and nanoemulsions, and the possibility of their use in gene therapy. For the two systems, cationic lipids and helper lipids were used. Nanoemulsions were prepared using sonication method and were composed of Captex® 355; Tween® 80; Spam® 80; cationic lipid, Stearylamine (SA) or 1,2-dioleoyl-3-trimethylammoniumpropane (DOTAP) and water (Milli-Q®). These systems were characterized by average droplet size, Polidispersion Index (PI) and Zeta Potential. The stability of the systems; as well as the DNA compaction capacity; their cytotoxicity and the cytotoxicity of the isolated components; and their transfection capacity; were also evaluated. Liposomes were made by hydration film method and were composed of DOTAP; 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE), containing or not Rhodaminephosphatidylethanolamine (PE- Rhodamine) and the conjugate Hyaluronic Acid DOPE (HA-DOPE). These systems were also characterized as nanoemulsions. Stability of the systems and the influence of time, size of plasmid and presence or absence of endotoxin in the formation of lipoplexes were also analyzed. Besides, the ophthalmic biodistribution of PE-Rhodamine containing liposomes was studied after intravitreal injection. The obtained results show that these systems are promising non-viral vector for further utilization in gene therapy and that this field seems to be very important in the clinical practice in this century. However, from the possibility to the practice, there is still a long way

Utilização de sílica gel organofuncionalizada para adsorção de íons metálicos em solução aquosa

In this work the organosilanes aminopropyltriethoxysilane, 3-mercaptopropyltryethoxisilane and n[-3-(trimetoxisilyl)propyl]ethylenetriamine, as well as tetraethylortosilicate (TEOS), were employed to produce, by sol-gel method, organofuncionalized silicon samples. The prepared samples were characterized by elementar analys by thermogravimetry and infrared spectroscopy. Those samples were employed to adsorb Cd2+, Pb2+, Ni2+ and Zn2+ from aqueous solutions (10, 20, 40, 60 and 80 mg L-1). In typical experiments, 50 mg of the organometrix was suspended in 20 mL of metal cation solutions at four different contact times: 30, 60, 90 and 120 minutes. The total amount of adsorbed cations were measured by atomic absorption spectrometry. To all investigated matrices, the following adsorption capacity was observed: Ni2+ > Zn2+ > Cd2+ > Pb2+. Such sequence is closely related with the cation radius, as well as the cation hardness