Simulação de sinais de RMN através das equações de Bloch

The aim of this paper was to present a simple and fast way of simulating Nuclear Magnetic Resonance signals using the Bloch equations. These phenomenological equations describe the classical behavior of macroscopic magnetization and are easily simulated using rotation matrices. Many NMR pulse sequences can be simulated with this formalism, allowing a quantitative description of the influence of many experimental parameters. Finally, the paper presents simulations of conventional sequences such as Single Pulse, Inversion Recovery, Spin Echo and CPMG.

Identification by computer-simulated RFLP of phytoplasmas associated with eggplant giant calyx representative of two subgroups, a lineage of 16SrIII-J and the new subgroup 16SrIII-U

Symptoms resembling giant calyx, a graft-transmissible disease, were observed on 1-5% of eggplant (aubergine; Solanum melongena L.) plants in production fields in Sao Paulo state, Brazil. Phytoplasmas were detected in 1 2 of 1 2 samples from symptomatic plants that were analysed by a nested PCR assay employing 16S rRNA gene primers R16mF2/R16mR1 followed by R16F2n/R16R2. RFLP analysis of the resulting rRNA gene products (1.2 kb) indicated that all plants contained similar phytoplasmas, each closely resembling strains previously classified as members of RFLP group 16SrIII (X-disease group). Virtual RFLP and phylogenetic analyses of sequences derived from PCR products identified phytoplasmas infecting eggplant crops grown in Piracicaba as a lineage of the subgroup 16SrIII-J, whereas phytoplasmas detected in plants grown in Braganca Paulista were tentatively classified as members of a novel subgroup 16SrIII-U. These findings confirm eggplant as a new host of group 16SrIII-J phytoplasmas and extend the known diversity of strains belonging to this group in Brazil.

Car-barrier impact response of a computer simulated Mustang. Final report.

Automobile Manufacturers Association, Detroit, Mich.

Further negative results regarding the use of continued fractions for digital computer arithmetic /

Mode of access: Internet.

Elasto-plastic impact of fine particles and fragmentation of small agglomerates

Surface deposition of dense aerosol particles is of major concern in the nuclear industry for safety assessment. This study presents theoretical investigations and computer simulations of single gas-born U3O8 particles impacting with the in-reactor surface and the fragmentation of small agglomerates. A theoretical model for elasto-plastic spheres has been developed and used to analyse the force-displacement and force-time relationships. The impulse equations, based on Newton's second law, are applied to govern the tangential bouncing behaviour. The theoretical model is then incorporated into the Distinct Element Method code TRUBAL in order to perform computer simulated tests of particle collisions. A comparison of simulated results with both theoretical predictions and experimental measurements is provided. For oblique impacts, the results in terms of the force-displacement relationship, coefficients of restitution, trajectory of the impacting particle, and distribution of kinetic energy and work done during the process of impact are presented. The effects of Poisson's ratio, friction, plastic deformation and initial particle rotation on the bouncing behaviour are also discussed. In the presence of adhesion an elasto-plastic collision model, which is an extension to the JKR theory, is developed. Based on an energy balance equation the critical sticking velocity is obtained. For oblique collisions computer simulated results are used to establish a set of criteria determining whether or not the particle bounces off the target plate. For impact velocities above the critical sticking value, computer simulated results for the coefficients of restitution and rebound angles of the particle are presented. Computer simulations of fracture/fragmentation resulting from agglomerate-wall impact have also been performed, where two randomly generated agglomerates (one monodisperse, the other polydisperse), each consisting of 50 primary particles are used. The effects of impact angle, local structural arrangements close to the impact point, and plastic deformation at the contacts on agglomerate damage are examined. The simulated results show a significant difference in agglomerate strength between the two assemblies. The computer data also shows that agglomerate damage resulting from an oblique impact is determined by the normal velocity component rather than the impact speed.

The activation process of the alpha1B-adrenergic receptor: potential role of protonation and hydrophobicity of a highly conserved aspartate.

In this study, a quantitative approach was used to investigate the role of D142, which belongs to the highly conserved E/DRY sequence, in the activation process of the alpha1B-adrenergic receptor (alpha1B-AR). Experimental and computer-simulated mutagenesis were performed by substituting all possible natural amino acids at the D142 site. The resulting congeneric set of proteins together with the finding that all the receptor mutants show various levels of constitutive (agonist-independent) activity enabled us to quantitatively analyze the relationships between structural/dynamic features and the extent of constitutive activity. Our results suggest that the hydrophobic/hydrophilic character of D142, which could be regulated by protonation/deprotonation of this residue, is an important modulator of the transition between the inactive (R) and active (R*) state of the alpha1B-AR. Our study represents an example of quantitative structure-activity relationship analysis of the activation process of a G protein-coupled receptor.

Modeling and Synthesis of Tracking Control for the Belt Drive System

Usingof belt for high precision applications has become appropriate because of the rapid development in motor and drive technology as well as the implementation of timing belts in servo systems. Belt drive systems provide highspeed and acceleration, accurate and repeatable motion with high efficiency, long stroke lengths and low cost. Modeling of a linear belt-drive system and designing its position control are examined in this work. Friction phenomena and position dependent elasticity of the belt are analyzed. Computer simulated results show that the developed model is adequate. The PID control for accurate tracking control and accurate position control is designed and applied to the real test setup. Both the simulation and the experimental results demonstrate that the designed controller meets the specified performance specifications.

Distribuição volumétrica e espectro de gotas de pontas de pulverização de baixa deriva

Objetivou-se neste trabalho avaliar a distribuição volumétrica e o espectro de gotas das pontas de pulverização de baixa deriva TTI110015, AI110015 e AVI11001 sob diferentes condições operacionais. A distribuição volumétrica foi determinada em bancada de ensaios padronizada analisando o coeficiente de variação (CV%) de uma barra simulada em computador, utilizando pressões de 200, 300 e 400 kPa, altura de 30, 40 e 50 cm em relação à bancada e espaçamento entre pontas de 40 a 100 cm. O espectro de gotas foi produzido utilizando-se apenas água como calda em um analisador de partículas em meio aquoso, nas pressões de 200, 300 e 400 kPa. Foram avaliados o DMV, a porcentagem de gotas com diâmetro inferior a 100 µm (%100 µm) e a amplitude relativa (AR). As pontas proporcionaram perfil descontínuo nas pressões de 300 e 400 kPa e uniforme a 200 kPa. Na pressão de 200 kPa, as pontas foram adequadas apenas para aplicação em faixa, e a 300 e 400 kPa, apenas para área total. Ocorreu menor CV (abaixo de 7%) com a maior pressão de trabalho e menor espaçamento entre pontas. À medida que se aumentou a pressão de trabalho, reduziu-se o DMV. As pontas TTI110015 e AI110015 em todas as pressões e a ponta AVI11001 na pressão de 200 kPa produziram gotas extremamente grossas e gotas grossas nas pressões de 300 e 400 kPa apenas para a ponta AVI11001. As pontas proporcionaram baixos valores de amplitude relativa (AR) e gotas de tamanho uniforme, bem como produziram baixa porcentagem de gotas menores que 100 µm, principalmente TTI110015 e AI110015, com menor risco de deriva.

Self-navigated isotropic three-dimensional cardiac T2 mapping.

PURPOSE: To implement and characterize an isotropic three-dimensional cardiac T2 mapping technique. METHODS: A self-navigated three-dimensional radial segmented balanced steady-state free precession pulse sequence with an isotropic 1.7-mm spatial resolution was implemented at 3T with a variable T2 preparation module. Bloch equation and Monte Carlo simulations were performed to determine the influence of the heart rate, B1 inhomogeneity and noise on the T2 fitting accuracy. In a phantom study, the accuracy of the pulse sequence was studied through comparison with a gold-standard spin-echo T2 mapping method. The robustness and homogeneity of the technique were ascertained in a study of 10 healthy adult human volunteers, while first results obtained in patients are reported. RESULTS: The numerical simulations demonstrated that the heart rate and B1 inhomogeneity cause only minor deviations in the T2 fitting, whereas the phantom study showed good agreement of the technique with the gold standard. The volunteer study demonstrated an average myocardial T2 of 40.5 ± 3.3 ms and a <15% T2 gradient in the base-apex and anterior-inferior direction. In three patients, elevated T2 values were measured in regions with expected edema. CONCLUSION: This respiratory self-navigated isotropic three-dimensional technique allows for accurate and robust in vitro and in vivo T2 quantification. Magn Reson Med 73:1549-1554, 2015. © 2014 Wiley Periodicals, Inc.

The Use of Radiostereometric Analysis in Fractures of the Distal Radius: From Phantom Models to Clinical Application

Radiostereometric analysis (RSA) is a highly accurate method for the measurement of in vivo micromotion of orthopaedic implants. Validation of the RSA method is a prerequisite for performing clinical RSA studies. Only a limited number of studies have utilised the RSA method in the evaluation of migration and inducible micromotion during fracture healing. Volar plate fixation of distal radial fractures has increased in popularity. There is still very little prospective randomised evidence supporting the use of these implants over other treatments. The aim of this study was to investigate the precision, accuracy, and feasibility of using RSA in the evaluation of healing in distal radius fractures treated with a volar fixed-angle plate. A physical phantom model was used to validate the RSA method for simple distal radius fractures. A computer simulation model was then used to validate the RSA method for more complex interfragmentary motion in intra-articular fractures. A separate pre-clinical investigation was performed in order to evaluate the possibility of using novel resorbable markers for RSA. Based on the validation studies, a prospective RSA cohort study of fifteen patients with plated AO type-C distal radius fractures with a 1-year follow-up was performed. RSA was shown to be highly accurate and precise in the measurement of fracture micromotion using both physical and computer simulated models of distal radius fractures. Resorbable RSA markers demonstrated potential for use in RSA. The RSA method was found to have a high clinical precision. The fractures underwent significant translational and rotational migration during the first two weeks after surgery, but not thereafter. Maximal grip caused significant translational and rotational interfragmentary micromotion. This inducible micromotion was detectable up to eighteen weeks, even after the achievement of radiographic union. The application of RSA in the measurement of fracture fragment migration and inducible interfragmentary micromotion in AO type-C distal radius fractures is feasible but technically demanding. RSA may be a unique tool in defining the progress of fracture union.

Die Natur als Erholungs(t)raum

Zur Erholung in die Natur gehen oder doch lieber zur Natursimulation greifen? Intuitiv würden die meisten Menschen der Natur einen größeren Erholungswert zusprechen als einer Natursimulation. Aber ist die Natur tatsächlich erholsamer? In der Naturerholungsforschung (Restorative Environment Research) kommen häufig Natursimulationen zum Einsatz, um die erholsame Wirkung von Natur zu ermitteln. Problematisch ist dabei, dass deren ökologische Validität und Vergleichbarkeit noch nicht empirisch abgesichert ist. Vorliegende Arbeit setzt an dieser methodischen und empirischen Lücke an. Sie überprüft sowohl die ökologische Validität als auch die Vergleichbarkeit von Natursimulationen. Dazu wird die erholsame Wirkung von zwei Natursimulationen im Vergleich zu der physisch-materiellen Natur empirisch untersucht und verglichen. Darüber hinaus werden Aspekte des subjektiven Erlebens und der Bewertung im Naturerholungskontext exploriert. Als bedeutsamer Wirkmechanismus wird die erlebnisbezogene Künstlichkeit/Natürlichkeit angesehen, die sich auf die Erlebnisqualität von Natursimulationen und der physisch-materiellen Natur bezieht: Natursimulationen weisen im Vergleich zur physisch-materiellen Natur eine reduzierte Erlebnisqualität auf (erlebnisbezogene Künstlichkeit), z.B. eine reduzierte Qualität und Quantität der Sinnesansprache. Stellt man einen derartigen Vergleich nicht nur mit der physisch-materiellen Natur, sondern mit unterschiedlichen Natursimulationstypen an, dann zeigen sich auch hier Unterschiede in der erlebnisbezogenen Künstlichkeit. Beispielsweise unterscheidet sich ein Naturfoto von einem Naturfilm durch das Fehlen von auditiven und bewegten Stimuli. Diese erlebnisbezogene Künstlichkeit kann die erholsame Wirkung von Natur - direkt oder indirekt über Bewertungen - hemmen. Als Haupthypothese wird angenommen, dass mit zunehmendem Ausmaß an erlebnisbezogener Künstlichkeit die erholsame Wirkung der Natur abnimmt. Dem kombinierten Feld- und Laborexperiment liegt ein einfaktorielles Vorher-Nachher-Design zugrunde. Den 117 Probanden wurde zunächst eine kognitiv und affektiv belastende Aufgabe vorgelegt, danach folgte die Erholungsphase. Diese bestand aus einem Spaziergang, der entweder in der physisch-materiellen Natur (urbaner Park) oder in einer der beiden audio-visuellen Natursimulationen (videogefilmter vs. computergenerierter Spaziergang durch selbigen urbanen Park) oder auf dem Laufband ohne audio-visuelle Darbietung stattfand. Die erlebnisbezogene Künstlichkeit/Natürlichkeit wurde also wie folgt operationlisiert: die physische Natur steht für die erlebnisbezogene Natürlichkeit. Die beiden Natursimulationen stehen für die erlebnisbezogene Künstlichkeit. Die computergenerierte Version ist im Vergleich zur Videoversion erlebnisbezogen künstlicher, da sie weniger fotorealistisch ist. Die Zuordnung zu einer der vier experimentellen Erholungssettings erfolgte nach dem Zufallsprinzip. Die Effekte von moderater Bewegung wurden in den Natursimulationen durch das Laufen auf dem Laufband kontrolliert. Die Beanspruchungs- bzw. Erholungsreaktionen wurden auf kognitiver (Konzentriertheit, Aufmerksamkeitsleistung) affektiver (3 Befindlichkeitsskalen: Wachheit, Ruhe, gute Stimmung) und physiologischer (Alpha-Amylase) Ebene gemessen, um ein umfassendes Bild der Reaktionen zu erhalten. Insgesamt zeigen die Ergebnisse, dass die beiden Natursimulationen trotz Unterschiede in der erlebnisbezogenen Künstlichkeit/Natürlichkeit zu relativ ähnlichen Erholungsreaktionen führen, wie die physisch-materielle Natur. Eine Ausnahme stellen eine der drei affektiven (Wachheit) und die physiologische Reaktion dar: Probanden der physisch-materiellen Naturbedingung geben an wacher zu sein und weisen - wider erwarten - eine höhere physiologische Erregung auf. Demnach ist die physisch-materielle Natur nicht grundsätzlich erholsamer als die Natursimulationen. Die Hypothese ließ sich somit nicht bestätigen. Vielmehr deuten sich komplexe Erholungsmuster und damit auch unterschiedliche Erholungsqualitäten der Settings an, die einer differenzierten Betrachtung bedürfen. Für die ökologische Validität von Natursimulationen gilt, dass diese nur mit Einschränkung als ökologisch valide bezeichnet werden können, d.h. nur für bestimmte, aber nicht für alle Erholungsreaktionen. Die beiden Natursimulationen führen ebenfalls trotz Unterschiede in der erlebnisbezogenen Künstlichkeit zu ähnlichen Erholungsreaktionen und können somit als gleichwertig behandelt werden. Erstaunlicherweise kommt es hier zu ähnlichen Erholungsreaktionen, obwohl die bestehenden Unterschiede von den Probanden wahrgenommen und die erlebnisbezogen künstlichere computergenerierte Version negativer bewertet wird. Aufgrund der nicht erwartungskonformen Ergebnisse muss das Erklärungskonzept der erlebnisbezogenen Künstlichkeit/Natürlichkeit infrage gestellt werden. Alternative Erklärungskonzepte für die Ergebnisse („Ungewissheit“, mentale räumliche Modelle), die sich andeutenden unterschiedlichen Erholungsqualitäten der Settings, methodische Einschränkungen sowie die praktische Bedeutung der Ergebnisse werden kritisch diskutiert.

l-resonance perturbations in infrared perpendicular bands

The effects of ℓ-type resonance on rovibrational bands in infrared spectra are reviewed. Observed spectra are compared with computer-simulated spectra obtained by solving the Hamiltonian matrix numerically and calculating the true (perturbed) wavenumber and intensity of each line in the band. The most obvious effects in the spectra are shown to result from intensity perturbations rather than line-shifts; in oblate symmetric tops the Q branch structure near the band center may show anomalies due to ℓ-resonance even at quite low resolution and even when the accidental resonance is not very exact. Numerical values of ℓ-doubling constants are obtained for several cyclopropane bands by comparing observed band contours at about 0.2-cm−1 resolution with computed contours. Although the constants are not determined with great precision, the sign of the ℓ-doubling constants is determined unambiguously.

The role of visual and nonvisual information in the control of locomotion

During locomotion, retinal flow, gaze angle, and vestibular information can contribute to one's perception of self-motion. Their respective roles were investigated during active steering: Retinal flow and gaze angle were biased by altering the visual information during computer-simulated locomotion, and vestibular information was controlled through use of a motorized chair that rotated the participant around his or her vertical axis. Chair rotation was made appropriate for the steering response of the participant or made inappropriate by rotating a proportion of the veridical amount. Large steering errors resulted from selective manipulation of retinal flow and gaze angle, and the pattern of errors provided strong evidence for an additive model of combination. Vestibular information had little or no effect on steering performance, suggesting that vestibular signals are not integrated with visual information for the control of steering at these speeds.

Eye-movements aid the control of locomotion

Eye-movements have long been considered a problem when trying to understand the visual control of locomotion. They transform the retinal image from a simple expanding pattern of moving texture elements (pure optic flow), into a complex combination of translation and rotation components (retinal flow). In this article we investigate whether there are measurable advantages to having an active free gaze, over a static gaze or tracking gaze, when steering along a winding path. We also examine patterns of free gaze behavior to determine preferred gaze strategies during active locomotion. Participants were asked to steer along a computer-simulated textured roadway with free gaze, fixed gaze, or gaze tracking the center of the roadway. Deviation of position from the center of the road was recorded along with their point of gaze. It was found that visually tracking the middle of the road produced smaller steering errors than for fixed gaze. Participants performed best at the steering task when allowed to sample naturally from the road ahead with free gaze. There was some variation in the gaze strategies used, but sampling was predominantly of areas proximal to the center of the road. These results diverge from traditional models of flow analysis.

Analysis of the genome of Spodoptera frugiperda nucleopolyhedrovirus (SfMNPV-19) and of the high genomic heterogeneity in group II nucleopolyhedroviruses

The genome of the most virulent among 22 Brazilian geographical isolates of Spodoptera frugiperda nucleopolyhedrovirus, isolate 19 (SfMNPV-1 9), was completely sequenced and shown to comprise 132 565 bp and 141 open reading frames (ORFs). A total of 11 ORFs with no homology to genes in the GenBank database were found. Of those, four had typical baculovirus; promoter motifs and polyadenylation sites. Computer-simulated restriction enzyme cleavage patterns of SfMNPV-1 9 were compared with published physical maps of other SfMNPV isolates. Differences were observed in terms of the restriction profiles and genome size. Comparison of SfMNPV-1 9 with the sequence of the SfMNPV isolate 3AP2 indicated that they differed due to a 1427 bp deletion, as well as by a series of smaller deletions and point mutations. The majority of genes of SfMNPV-1 9 were conserved in the closely related Spodoptera exigua NPV (SeMNPV) and Agrotis segetum NPV (AgseMNPV-A), but a few regions experienced major changes and rearrangements. Synthenic maps for the genomes of group 11 NPVs revealed that gene collinearity was observed only within certain clusters. Analysis of the dynamics of gene gain and loss along the phylogenetic tree of the NPVs showed that group 11 had only five defining genes and supported the hypothesis that these viruses form ten highly divergent ancient lineages. Crucially, more than 60% of the gene gain events followed a power-law relation to genetic distance among baculoviruses, indicative of temporal organization in the gene accretion process.