A methodology for analysis of sugarcane productivity trends - 2. Comparing variety trials with commercial productivity

Previous research has reported both agreements and serious anomalies in relationships between production attributes of sugarcane varieties in variety trials (VTs) and commercial production (CP). This paper examines VT and CP data for tonnes of cane per hectare (TCH) and sugar content (CCS). Data, analysed by REML, included 107 VTs and 54 CP mill years for 9 varieties from the mill districts of Mulgrave, Babinda, and Tully for harvest years 1982-99. Important consistencies included high TCH of Q152, high CCS of Q117 and Q120, and low CCS of H56-752. Significant anomalies existed with respect to TCH for Q113, Q117, Q120, Q122, Q138, and H56-752 and to CCS for Q113 and Q124. Investigation of these anomalies was assisted by access to independent REML analyses of CP data for 65692 individual Tully cane blocks from 1988 to 1999 and by the knowledge of persons familiar with the preferential uses of varieties by farmers. Minor anomalies were due to limited year or mill area data. Q124 TCH was deemed to be decreased and its CCS increased by severe disease in Babinda CP in the extremely wet 1998 and 1999 seasons. Other serious anomalies have credible but unsubstantiated explanations. The most convincing, for Q113, Q117, Q138, and H56-752, are that these varieties were deployed unevenly with regard to late season harvesting, predominant use or avoidance on high fertility soils, or use confined to low fertility sandy soils, respectively. Uneven deployment results in confounding of these effects in the varietal CP statistics at mill area level. It is concluded that VTs cannot be enhanced to anticipate or evaluate most effects of uneven deployment. They give adequate predictions of relative CP performance for varieties deployed evenly across confounding influences. Routine analyses of individual block CP data would be useful and enhanced by addition of relevant information to the block records.

Crop coefficient and water consumption of eggplant in no-tillage system and conventional soil preparation

Under organic management in Seropédica-RJ, Brazil, using a weighing lysimeter, the crop coefficients (kc), the maximum evapotranspiration and the productivity of eggplant cultivation under two cropping systems (no tillage with straw plus soil with conventional preparation) were determined. A whole randomized layout with two treatments (no tillage and conventional) and five replicates during 134 days of cultivation were adopted. There were no significant differences in the eggplant cultivation in the two cropping systems, with a maximum commercial productivity obtained from 47.42 Mg ha-1 for the no-tillage system, and 47.91 Mg ha-1 for the conventional tillage. The accumulated ETc was 285.15 and 323.44 mm for the no-tillage and conventional, respectively. The crop coefficients value for the phases: 1 - transplanting, flowering, 2 - flowering-fruiting, 3 - fruit- first harvesting, 4- first harvesting of the final crop cycle was 0.83, 0.77, 0.90 and 0.97 in no-tillage system for the respective phases and for the conventional one 0.81, 1.14, 1.17 and 1.05 for the same steps described above.

Distancia entre plantas y dosis de nitrógeno y potasio en sandía sin semillas fertirrigada

El objetivo de este trabajo fue evaluar los efectos de dosis de N y K2O, vía fertirrigación por goteo, y de la distancia entre plantas sobre la productividad del híbrido Shadow de sandía sin semillas. El experimento se realizó de agosto a octubre de 2008 en el Município de Tupã, SP, Brazil. Se avaluaran cuatro dosis de N + K2O (79,8 + 106,7, 106,4 + 142,2, 133,0 + 177,7, y 159,6 + 213,2 kg ha-1, respectivamente), y cuatro distancias entre plantas (0,5, 1,0, 1,5 y 2,0 m), en hileras espaciadas de 2,0 m. Se utilizó el diseño experimental de bloques al azar, en parcelas subdivididas, con tres repeticiones. Las variables evaluadas fueron: concentración foliar de N y K, peso medio de frutos, número de frutos y productividad total y comercial; y número de frutos en las clases de 3 a 5, 5 a 7, 7 a 9 kg y con más de 9 kg, por planta y por hectárea. Hubo efecto del factor dosis de N + K2O sobre la concentración foliar de K, y la productividad total y comercial de la sandía híbrido Shadow disminuyó linealmente con el aumento de la distancia entre plantas. Sin embargo, no hubo efecto significativo de la interacción ni efecto individual de los factores sobre las otras variables avaliadas.

Adubação com boro em batata-doce: efeito das fontes, doses e modos de aplicação

Boron (B) fertilization can result in high yield and better sweet potato storage roots quality. However, there is few works about this subject. The objective was to evaluate the yield of sweet potato crops in response to B sources, rates and application form. The experimental design was complete randomized blocks, in factorial outline ((2x2x2)+1), with three replications, which resulted of the combination of sources of B (boric acid and borax), application form (via soil and via foliar) and doses of B (1 and 2 kg ha(-1)) and a control treatment (without B). There was no interaction between the factors studied for the commercial yield of sweet potato. No significant differences was found between B sources and application form, but they showed higher yield than the control treatment. Additionally, sweet potato yield increade with application of 2 kg ha(-1) of B.

Desempenho de híbridos de couve-flor de verão em Jaboticabal

Instalou-se um experimento, em campo aberto, com o objetivo de comparar o desempenho de oito híbridos de couve-flor de verão. Adotou-se o delineamento em blocos casualizados, com oito tratamentos e quatro repetições. A parcela experimental de 14 m² constou de 28 plantas distribuídas no espaçamento de 1,0 m entre linhas e 0,5 m entre plantas. Foram avaliados os híbridos de couve-flor: TPX00123, TPC00218, Sarah AF-1169, Sharon, Snow-Flake, First-Snow, Veneza e Verona. As adubações de cobertura foram realizadas com 10,5 kg de sulfato de amônio e 2,8 kg de cloreto de potássio, aplicados aos 15, 30, 45 e 60 dias após o transplante das mudas. A colheita das cabeças foi realizada quando começaram a atingir o ponto ideal de colheita com cabeças compactas e botões florais ainda unidos. Os híbridos TPC00218 e TPX00123 mostraram-se promissores, com produtividades comerciais de 23,8 e 23,2 t ha-1, respectivamente. O híbrido First-Snow possui baixo desenvolvimento de plantas e boa produtividade, podendo ser cultivado mais adensado. O híbrido Snow-Flake foi o que obteve menor produtividade, não sendo recomendado para plantio na região de Jaboticabal. Todos os híbridos testados apresentaram produção classificada na categoria extra e na classe 8 (maiores que 230 mm).

Influência das épocas de cultivo e do estabelecimento do consórcio na produção de tomate e alface consorciados

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Determinação das características agronômicas, dos distúrbios fisiológicos, do estado nutricional da planta e da qualidade dos tubérculos em cultivares de batata (Solanum tuberosum L.)

Pós-graduação em Agronomia (Agricultura) - FCA

Esterco de bovino e nitrogênio na cultura de rabanete

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Qualidade fisiológica da semente e adubação com zinco na cultura do milho-doce

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Fertilização fosfatada no desempenho agronômico e acúmulo de nutrientes do meloeiro

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Produtividade de melância em função da adubação nitrogenada, potássica e população de plantas

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Cultivo e controle de insetos do tomateiro em diferentes ambientes

Pós-graduação em Agronomia - FEIS

Manejo da fertirrigação para melancia em função da condutividade elétrica da solução do solo

Pós-graduação em Agronomia (Horticultura) - FCA

Posibilidades de cultivo de nuevas especies marinas en el área mediterránea

La acuicultura, el cultivo y cría de animales y plantas acuáticas, representa en la actualidad una fuente esencial de proteína animal y vegetal altamente saludable y nutritiva, proporcionando un sistema de vida y de ingresos en todo el mundo. La acuicultura además de ser un motor para el desarrollo social y económico de las áreas costeras marinas y fluviales mundiales, supone en muchas regiones subdesarrolladas una garantía de alimento de alta calidad y es clave en la seguridad alimentaria de sus poblaciones. El desarrollo de la acuicultura se ha realizado fundamentalmente en los últimos 50 años, y ha sido sobre todo en la década de los años 80, cuando la acuicultura ha experimentado un fuerte crecimiento con tasas anuales que superan el 6%. Con el estancamiento de la producción pesquera y el incremento de la población mundial, la acuicultura se presenta como la única fuente posible de suministro de proteínas (vegetales y animales) de alta calidad, ricas en aceites omega 3 (EPA y DHA) de origen acuático. En la actualidad la producción procedente de la acuicultura supera los 95 millones de toneladas anuales, siendo ligeramente superior a los 94 millones de toneladas anuales provenientes de la pesca extractiva. De este total mundial acuícola, la producción asiática representa el 89%, mientras que la europea el 4,2% Aunque el 46% de la producción mundial acuícola se concentra únicamente en solo 10 especies, una de las principales características de la acuicultura es la gran diversidad de especies cultivadas, más de 500, realizándose su cría bajo diferentes tecnologías y sistemas productivos. El ámbito de esta tesis, es únicamente la acuicultura marina que se desarrolla en las aguas del mar mediterráneo, indistintamente de los sistemas y tecnología de producción utilizados. Los principales grupos de cultivo que se realizan en las aguas del Mediterráneo son los moluscos y los peces, siendo muy escasos los cultivos de otros grupos como crustáceos y macroalgas. La piscicultura marina mediterránea está dominada por el cultivo en jaulas flotantes de dos especies, la dorada (Sparus auratus) y la lubina (Dicentrarchus labrax). Estas dos especies y tras 30 años de experiencia de cultivo, mantienen todavía una ineficiencia productiva alta (reducida selección genética, lento crecimiento hasta talla comercial, alto factor de conversón del pienso…) y además ocupan un estrecho nicho de mercado, ya que prácticamente toda la comercialización de la dorada y lubina se realiza en fresco y sin elaborar ni transformar, a una talla media de 500 g. Para dar respuesta desde la acuicultura mediterránea al alto consumo y a la creciente demanda que en la Unión Europea existe de los productos acuícolas, y en especial los productos elaborados y transformados, es necesario de manera urgente, un aumento de la producción de las especies ya cultivadas (dorada y lubina) mediante la mejora de su eficiencia productiva, al mismo tiempo que se debe iniciar la producción industrial de nuevas especies piscícolas, mediante la diversificación de los cultivos. Para llevar a cabo esta diversificación, se hace necesario el establecimiento de una metodología clara, que asegure una selección de especies apropiadas y rentables para la industria acuícola mediterránea, cuyo cultivo sostenible debiera cumplir con los desafíos que el sector tiene. Nuevas especies que complementen y cubran las demandas actuales y futuras del mercado Europeo e Internacional de productos acuícolas. Nuevas especies con parámetros productivos eficientes, que garanticen unos costes productivos competitivos. Nuevas especies que puedan ser cultivadas utilizando como base la tecnología de producción ya existente en el sector. El objetivo de esta tesis es la definición y desarrollo de una metodología sencilla para la selección de nuevas especies piscícolas marinas para su cultivo eficiente y sostenible Y bajo la aplicación de esta metodología, la selección de un grupo de especies piscícolas para su cultivo rentable a corto y medio plazo (6-8 años) en el Mediterráneo. Para ello se ha definido y aplicado una metodología con la que se han evaluado diez especies candidatas, previamente escogidas de una serie de listas previas originadas en los distintos estudios y trabajos de diversificación realizados con anterioridad por otros equipos de investigación. Estas especies candidatas han sido: Seriola dumerili. (Seriola) , Argyrosomus regius (Corvina), Polyprion americanus (Cherna), Ephinephelus marginatus (Mero), Dentex dentex (Dentón), Pagrus pagrus (Pargo), Solea senegalensis (Lenguado del Senegal), Thunnus thynnus (Atún rojo), Mugil cephalus (Lisa), Coryphaena hippurus (Lampuga). El conjunto de estas especies ocupa un amplio y variado espectro dentro de las distintas áreas de mercado, productiva, tecnológica, y medioambiental . Y en todas ellas existe una experiencia mínima en sus diferentes fases de cultivo. En el desarrollo de la metodología de selección, en esta tesis se han definido diversos parámetros de evaluación, considerados como los más significativos y sencillos de aplicar. Los parámetros se han agrupado en tres bloques, el comercial, el productivo y el medioambiental. El Bloque de Mercado, comprende aquellos criterios que están relacionados con la comercialización de la especie. Calidad de la carne del pescado. Competencia con otras especies en el mercado. Potencial de Transformado. Precio de venta del pescado. El bloque Medioambiental incluye criterios del grado de idoneidad de la especie en la región y del grado de impacto ambiental de su cultivo. Rango de temperaturas del agua óptimo para el cultivo. Potencial impacto ambiental de su cultivo. Eslabón trófico de la especie.. El bloque Productivo, engloba los criterios y parámetros relacionados con el nivel de conocimiento y control que sobre su cultivo existen ( larvario, engorde, tecnología) Grado de control de la fase larvaria. Disponibilidad de alevines en el sector Crecimiento. Factor de conversión Aprovechamiento de la capacidad productiva instalada, Coste de inversión. Previa a la evaluación se han descrito las principales características de las especies candidatas en función del estado y experiencia actual sus cultivos. En la aplicación de estos criterios se han establecido matrices de evaluación y a cada criterio se le ha asignado un valor diferente en función de sus características y propiedades selectivas. Los resultados obtenidos mediante la aplicación de la metodología de evaluación propuesta, han señalado la seriola y la corvina como especies más recomendadas para su puesta en cultivo en el Mediterráneo a corto y medio plazo. Las otras dos especies seleccionadas han sido la lisa y la lampuga. Como conclusión final podemos señalar que el cultivo de nuevas especies es fundamentalmente para el desarrollo sostenible de la acuicultura mediterránea. Esta diversificación debe basarse en la aplicación de una metodología sencilla y práctica, que garantice una selección de especies cuyo cultivo sea rentable y abarquen nuevos segmentos de mercado. ABSTRACT Aquaculture, the cultivation and breeding of aquatic animals and plants, currently represents an essential source of highly nutritious and healthy protein that provides a way of life and income all over the world. Apart from being a social and economic driver in coastal and marine areas, it also entails a guaranteed high quality nourishment in many undeveloped areas being key to the alimentary safety of their population. Aquaculture has developed mainly in the last 50 years and experienced a high growth especially during the Eighties when the annual rates were above 6%. With fishing production stagnating and the global population increasing, aquaculture emerges as the only possible animal and vegetable protein source of aquatic origin, high in quality and omega 3 oils (EPA and DHA). Here and now, aquaculture production is over 95 million tons per year, which is slightly higher than the 94 million tons per year that come from extractive fisheries. From this aquaculture total, Asiatic production represents 89% while Europe´s is only 4.2%. Even though 46% of the global aquaculture production focuses just on 10 species, one of the main characteristics of aquaculture is the wide diversity of cultivated species –over 500– using different technologies and production systems. This PhD’s scope is only marine aquaculture in Mediterranean water, regardless of the technology or systems used. The main crop groups in the Mediterranean sea are molluscs and finfish, while crustacean and macroalgae cultivations are very limited. Mediterranean fish culture is dominated by the cultivation in floating cages of two species: Bream (Sparus auratus) and Bass (Dicentrarchus labrax). After 30 years of farming, these two species still keep a high productive inefficiency –reduced genetic selection, slow growth to marketable size, high feed conversion rate– and fill a narrow niche market as practically all bream and bass is sold fresh and whole, unprocessed and untransformed, with an average size of 500 grams. To meet the high consumption and growing demand of aquaculture products, in the European Union (especially those prepared and transformed), Mediterranean aquaculture needs to urgently increase the production of the species already under cultivation (Bass and Bream) by means of improving its productive efficiency and at the same time begin initiating industrial production of new species by diversifying the cultivation. To carry out this diversification it is necessary to establish a clear methodology that ensures the selection of adapted and profitable species for the Mediterranean aquaculture industry. The sustainable farming of these new species needs to meet the challenges this sector faces: New species that complement and meet the current and future needs of the European and International markets for aquaculture products. New species with efficient production parameters that ensure competitive production costs. New species that can be cultivated using already existing production technologies. The aim of this PhD is to define and develop a simple methodology for the selection of new marine fish species for their efficient and sustainable cultivation. And by applying this methodology, to select a group of fish species for its profitable crop in the short and medium term (6-8 years) in the Mediterranean. For this, a methodology has been defined and applied evaluating ten candidate species selected from a series of lists originated from different studies and from diversification works previously conducted by other research teams. These candidate species are: Seriola dumerili. (Greater amberjack), Argyrosomus regius (Meagre), Polyprion americanus (Wreckfish), Ephinephelus marginatus (Dusky grouper), Dentex dentex (Common dentex), Pagrus pagrus (Red porgy), Solea senegalensis (Senegal sole), Thunnus thynnus (Bluefin tuna), Mugil cephalus (Grey mullet), Coryphaena hippurus (Dolphinfish). All these species occupy a broad and varied spectrum within different productive, technological and environmental market areas. There is minimal experience in their different stages of cultivation for all of them. While developing the selection methodology several evaluation parameters have been defined in this PhD, considered the most significant and simple to apply. The parameters are grouped in three blocks: commercial, productivity and environmental. Market block comprises criteria related to the marketing of the species. Quality of the fish meatCompetition with other species in the marketTransformation potentialFish selling price Environment block includes criteria related to the degree of suitability of the species in the region and the degree of environmental impact of their cultivation. Optimal water temperature range for cultivationPotential environmental impact of their cultivationTrophic chain level. Productivity block includes criteria and parameters related to the level of knowledge and control over their cultivation (larval, ongrowing, technology) Degree of control of the larval stageAvailability of alevin in the sector GrowthFeed conversion rate. Exploitation of installed capacityInvestment cost Prior to the evaluation, the main characteristics of the candidate species have been described based on the current status and experience of their cultivations. When applying these criteria evaluation matrices have been established assigning to each criteria a different value depending on their characteristics and selective properties. The results obtained by applying the proposed assessment methodology have identified the Greater Amberjack and Meagre as the most recommended species for farming in the Mediterranean in the short and medium term. The other two selected species were the Grey Mullet and the Dolphinfish. In conclusion, the cultivation of new species is crucial for the sustainable development of Mediterranean aquaculture. This diversification has to be based on the application of a simple and practical methodology that guarantees a selection of species whose cultivation is profitable and covers new market segments.

Stand density management in rainforest plantations

Trees in plantations established for timber production are usually grown at a sufficiently high density that canopy closure occurs within a relatively short time after planting. The trees then shade and outcompete most herbs, shrubs or grasses growing at the site. The closer the spacing (i.e. the greater the density) the faster this will occur. Subsequently, as the trees grow larger, this between-species competition is replaced by within-species competition. If unmanaged, this competition can reduce the commercial productivity of the plantation. Thus, there are two management dilemmas. One is knowing the best initial planting density. The second is knowing how to management the subsequent between-tree competition in order to optimize overall plantation timber productivity. In this chapter we consider initial spacing and thinning for high value timber trees grown in single and mixed species plantations. From growth studies in stands of different ages recommendations are proposed for managing both types of plantations where the primary objective is timber production. It seems that many rainforest species will require more space to achieve optimal growth than most eucalypts and conifers. On the other hand many rainforest species do not have strong apical dominance. Care will be needed to balance these two attributes.