11 resultados para cheesemaking
Resumo:
This paper reviews the use of plant extracts as vegetable coagulants for cheesemaking. It covers the plants used as sources of coagulants, with a historical overview and particular emphasis on Cynara species. The genus Cynara L., its composition, milk clotting and proteolytic enzymes (cardosins) and their specificity towards peptide linkages are also described. Cheeses produced in the Iberian Peninsula using Cynara L. as coagulant are documented. Cynara L. is still the most used vegetable coagulant in cheesemaking, and also the most investigated. However, much work remains to be done to understand its action during cheese maturation and further characterization.
Resumo:
Mode of access: Internet.
Resumo:
The period, known to UK farmers and processors as the "spring flush", when the cows' diet changes from dry feed to spring pasture, has long been established as a time of change in milk properties and processing characteristics. Although it is believed to be a time when problems in processing are most likely to occur (e.g. milk that does not form clots or forms weak gels during cheesemaking), there is little evidence in the literature of detailed changes in milk composition and their impact on product manufacture. In this study, a range of physicochemical properties were analysed in milk collected from five commercial dairy herds before, during and after the spring flush period of 2006. In particular, total and ionic calcium contents of milk were studied in relation to other parameters including rennet clotting, acid gel properties, heat coagulation, alcohol stability, micelle size and zeta potential. Total divalent cations were significantly reduced from 35.4 to 33.4 mmol.L-1 during the study, while ionic calcium was reduced from 1.48 to 1.40 mmol.L-1 over the same period. Many parameters varied significantly between the sample dates. However, there was no evidence to suggest that any of the milk samples would have been unsuitable for processing - e.g. there were no samples that did not form clots with chymosin within a reasonable time or formed especially weak rennet or acid gels. A number of statistically significant correlations were found within the data, including ionic calcium concentration and pH; rennet clotting time (RCT) and micelle diameter; and RCT and ethanol stability. Overall, while there were clear variations in milk composition and properties over this period, there was no evidence to support the view that serious processing problems are likely during the change from dry feed to spring pasture.
Resumo:
Portugal has a strong tradition of cheesemaking from raw ewe's milk; most of these cheeses are still made on a traditional farmhouse scale. Their production is protected by Protected Designation of Origin (PDO) but the specific biochemical aspects of the majority still need to be characterised. Two different cheesemaking procedures, traditional and semi-industrial, were compared technologically, biochemically and microbiologically. It was observed that, despite the highly significant difference between artisanal and semi-industrial cheeses (P < 0.001), both products were within the limits of national regulations for most parameters except maturation temperature, humidity and the value for the maturation index. Although the present study was not fully representative of the region, the results obtained suggest that the specific regulations for Serpa cheese should be revised and that other parameters, such as moisture and salt-in-moisture content, which are very much dependent on the cheesemaking process, should be included in order to characterise better this traditional cheese.
Resumo:
The cheese industry has continually sought a robust method to monitor milk coagulation. Measurement of whey separation is also critical to control cheese moisture content, which affects quality. The objective of this study was to demonstrate that an online optical sensor detecting light backscatter in a vat could be applied to monitor both coagulation and syneresis during cheesemaking. A prototype sensor having a large field of view (LFV) relative to curd particle size was constructed. Temperature, cutting time, and calcium chloride addition were varied to evaluate the response of the sensor over a wide range of coagulation and syneresis rates. The LFV sensor response was related to casein micelle aggregation and curd firming during coagulation and to changes in curd moisture and whey fat contents during syneresis. The LFV sensor has potential as an online, continuous sensor technology for monitoring both coagulation and syneresis during cheesemaking.
Resumo:
Dhaka cheese is a semihard artisanal variety originating from Bangladesh where manual curd kneading is a normal stage in its manufacture. Dhaka cheeses were produced with different degrees of curd kneading to quantify the curd manipulation process in terms of pressure and to standardise the length of operation. The effect of manipulation on the composition, rheology, texture and microstructure of fresh cheese was also studied. Manipulation had significant effects (P < 0.05–0.001) on most of the parameters studied. One minute of curd manipulation was found to be sufficient for Dhaka cheesemaking
Resumo:
Caseins comprise make up about 80% of the total protein content of milk and present polymorphism with change in the amino acid sequence. Within this abundance of proteins, kappa-casein is noteworthy, since it has been associated with differences in milk yield, composition and processing. The objective of this study was to observe the existence of polymorphism in the kappa-casein gene in female buffaloes. For this purpose, blood samples from 115 female buffaloes, collected with vacutainer by needle punctionure of the jugular vein, were used. for genomic DNA extraction was done from blood samples. The PCR-RFLP and SSCP techniques demonstrated that the studied animals were monomorphic for the kappa-casein gene. Only allele B was observed in these animals, which was present in homozygosis. Therefore, it was not possible to quantify the gene action on milk yield and its constituents. The monomorphism observed in the population studied would allow the development of a method to identify mixtures of cow and buffalo milk in mozzarella cheese production, especially because, in cattle, the kappa-casein gene is polymorphic. Copyright by the Brazilian Society of Genetics.
Resumo:
Report of the 5th annual meeting published with the Transactions of the Wisconsin State Agricultural Society, v. 34.
Resumo:
Milk obtained from cows on 2 subtropical dairy feeding systems were compared for their suitability for Cheddar cheese manufacture. Cheeses were made in a small-scale cheesemaking plant capable of making 2 blocks ( about 2 kg each) of Cheddar cheese concurrently. Its repeatability was tested over 10 separate cheesemaking days with no significant differences being found between the 2 vats in cheesemaking parameters or cheese characteristics. In the feeding trial, 16 pairs of Holstein - Friesian cows were used in 2 feeding systems (M1, rain-grown tropical grass pastures and oats; and M5, a feedlot, based on maize/barley silage and lucerne hay) over 2 seasons ( spring and autumn corresponding to early and late lactation, respectively). Total dry matter, crude protein (kg/cow. day) and metabolisable energy (MJ/cow.day) intakes were 17, 2.7, and 187 for M1 and 24, 4, 260 for M5, respectively. M5 cows produced higher milk yields and milk with higher protein and casein levels than the M1 cows, but the total solids and fat levels were similar (P > 0.05) for both M1 and M5 cows. The yield and yield efficiency of cheese produced from the 2 feeding systems were also not significantly different. The results suggest that intensive tropical pasture systems can produce milk suitable for Cheddar cheese manufacture when cows are supplemented with a high energy concentrate. Season and stage of lactation had a much greater effect than feeding system on milk and cheesemaking characteristics with autumn ( late lactation) milk having higher protein and fat contents and producing higher cheese yields.
Resumo:
Two cheese formulations made from raw milk and endogenous yeasts with 30, 60 and 180 days of maturation in two dairy Paraná Southwest were studied to evaluate their quality through physical, physical-chemical, microbiological and sensorial characteristics, as one of the stages of development of a typical regional cheese. The production was accompanied from designing the flowchart processing, where the samples were collected to perform the analysis of proteins, lipids, moisture, ash, carbohydrates, total solids, fat in dry matter, calories; water activity, instrumental texture (hardness, adhesiveness, springiness, cohesiveness, resiliency and chewiness), instrumental color (CIE Lab); microbiological quality was assessed searching for total and thermotolerant coliforms, coagulase positive staphylococci and Salmonella spp.; the acceptance related to sensory characteristics of color, appearance, flavor, texture, taste and purchase intent was evaluated through the structured hedonic scale. This research contributed information relevant to the production process, such as the realization of the viability in freeze-drying lactic acid bacteria yeast isolated from milk in the Southwestern Mesoregion of Parana and the results of the analysis of the cheese showed similarity between formulations, regarding the physical, physical-chemical characterization, moreover good microbiological quality, where the differences between samples of dairy products were not perceived by sensory panelists. Adjustments in standardization related to technological quality control is an extremely important factor for the success of dairy companies and small producers involved in the project and that they have the option of producing the Santo Giorno, a fine cheese, with the great advantage of adding features of region, with high standard of sanitary conditions and with great consumer acceptance of indicative.
Resumo:
Dairy industries are asked to be increasingly competitive and efficient. Despite the increasing trend in milk yield and protein content during the last decade genetic selection, milk coagulation ability has diminished and even if the absolute amount of cheese produced has increased, the relative cheese yield from a set amount of milk, has decreased. As casein content and variants, along with milk clotting properties (MCP) are determined to a large extent at DNA level, genetic selection and embryo transfer can provide efficacious tools to reverse this trend and achieve improvements. The aim of the proposed research was to determine how rapidly and to what extent milk coagulation properties could be improved by using embryo transfer (ET) as a tool to increase the frequency of k-casein BB genotype cattle and reducing A and E variants in an Italian Holstein herd with a low prevalence of the favourable genotype. In the effort to optimize superovulation protocols and results, synchronization of wave emergence was performed through manual transrectal ablation of the largest (dominant) ovarian follicle on days 7 or 8 of the cycle (estrus = day 0); different drugs and dosage for the superstimulation protocol were experimented trying to overcome the negative effects of stress and the perturbance of LH secretion in superovulated highly producing lactating cows and the use of SexedULTRA™ sex-sorted semen, for artificial insemination of superovulated cows was reported for the first time. The selection program carried out in this research, gave evidence and gathered empirical data of feasible genetic improvements in cheesemaking ability of milk by means of k-casein BB selection. In conclusion, in this project, selection of k-casein BB genotype markedly enhanced cheese-making properties of milk, providing an impetus to include milk coagulation traits in genetic selection and breeding programs for dairy cattle.