Response of P, K, Mg and NO‚́ƒ-N contents of carrots to irrigation, soil compaction, and nitrogen fertilisation

Selostus: Maan tiiviyden, sadetuksen ja typpilannoituksen vaikutus porkkanan kivennäisainepitoisuuteen ja ravinteiden ottoon sekä nitraatin kertymiseen

Biological contamination of barley and carrots by pathogens in soil fertilized with anthropogenic nutrients

Conference publication in Kalmar ECO-TECH’07. International Conference on Technologies for Waste and Wastewater Treatment, Energy from Waste, Remediation of Contaminated Sites and Emissions Related to Climate November 26-28 2007, Kalmar, Sweden.

Comparative lifecycle assessment on organic and conventional carrots – case: Carrots from South-Savo and imported carrots from Italy

Organic farming is perceived to be an environmental friendly method of food production, thus assumed to be an alternative means of minimizing food-based environmental footprints. However, lower yield and unproductive years in organic crop rotation raise questions of whether it is really an environmentally friendly farming practice. Thus, the aim of this thesis was to examine the carbon footprint and energy demands of organic carrots cultivated and sold in South-Savo, Finland and compare them with those of local and imported conventional carrots using lifecycle assessment (LCA) as a method. From the investigation, it was found that organic carrots produced in South-Savo have the lowest GHG emissions and energy demand. The GHG emissions of local organic, local conventional and imported conventional carrots were found to be 4g CO2 eq. kgcarrots-1, 142g CO2 eq. kgcarrots-1 and 280 g CO2 eq. kgcarrots-1, respectively. On the other hand, energy demand for those carrots was found to be 1,33 MJ, 1,88 MJ and 3,68 MJ kgcarrots-1. Furthermore, it was also found that local organic carrots would have approximately similar GHG emissions as conventional counterpart if soil carbon stock change was excluded from the study.

Provitamin a activity of Brazilian carrots: leaves and roots, raw and cooked and their chemical composition

The purpose of this study was to determine through carotenoid analysis, the provitamin A value of two carrots (Daucus carota L.) cultivars (Brasilia and Beta3), leaves and roots, raw and submitted to two ways of cooking: boiling and microwave. Proximate analysis results are also presented for a better characterization of these vegetables (moisture, ash, lipids, proteins, fiber and total carbohydrates). The main carotenoids sources of provitamin A in this vegetable, both in leaves or roots was β-carotene and α-carotene. α-carotene shows half of the provitamin A value of β-carotene. Samples of the Brasilia cultivar presented the better provitamin A value both for leaves and roots. The results for raw samples of the Brasilia cultivar were 464.48 RE/100g for leaves and 606.42 RE/100g for roots. There were no significant losses of provitamin A with the boiling or microwave cooking methods used.

Evaluation of total carotenoids, alpha- and beta-carotene in carrots (Daucus carota L.) during home processing

This study aims to analyze the influence of dehydration and different preparation methods during home processing related toalpha-carotene, beta-carotene and total carotenoids stability in carrots. Vitamin A values were evaluated after different treatments. Thus, carrots were submitted to steam cooking, water cooking with and without pressure, moist/dry cooking and conventional dehydration. Determination of alpha- and beta-carotenes was made by High-Performance Liquid Chromatography (HPLC) (conditions were developed by us) using spectrophotometric detection visible-UV at 470 nm; a RP-18 column and methanol: acetonitrile: ethyl acetate (80: 10: 10) as mobile phase. Total carotenoids quantification was made by 449 nm spectrophotometer. The retention of the analyzed carotenoids ranged from 60.13 to 85.64%. Water cooking without pressure promoted higher retention levels of alpha- and beta-carotene and vitamin A values, while water cooking with pressure promoted higher retention levels of total carotenoids. Dehydration promoted the highest carotenoid losses. The results showed that, among the routinely utilized methods under domestic condition, cooking without pressure, if performed under controlled time and temperature, is the best method as it reduces losses in the amount of alpha- and beta-carotene, the main carotenoids present in the carrots. Despite the significant carotenoid losses, carrots prepared through domestic methods, remain a rich source of provitamin A.

Influence of temperature on the respiration rate of minimally processed organic carrots (Daucus Carota L. cv. Brasília)

The objective of this work was to study the influence of temperature on the respiration rate of minimally processed organic carrots (Daucus Carota L. cv. Brasília) with and without the application of a gelatin film. The samples were packed in flexible bags and stored at 1, 5 and 10 °C. During the five days of storage, the CO2 and O2 concentrations in the headspace of the package were monitored by gas chromatography, and the mathematical model based on enzymatic kinetics was used to estimate the respiration rate of minimally processed organic carrots. The effect of temperature on the respiration rate was evaluated by the Arrhenius equation. The results showed that the O2 concentration decreased during the storage period and the CO2 concentration increased. The lowest O2 concentrations of 2.59 and 2.66% were found for the samples stored at 10 °C with and without the film, respectively. For the CO2 concentration, the highest concentrations of 16.25 and 16.32% were again found for the temperature of 10 °C with and without the application of the film, respectively. At the temperature of 1 °C, the maximum respiratory rates for the samples without and with the film were 10.82 and 10.44 mL CO2.kg-1/hour, respectively, after 72 hours of storage. The greatest respiratory rate was obtained at 10 °C, the maximum peak being reached after 50 hours. Activation energy values were of 50.59 kJ.mol-1, for the samples with the film, and 51.88 kJ.mol-1 for the samples without the film.

Construction of 2D transparent micromodels in polyester resin with porosity similar to carrots

Microscopic visualization, especially in transparent micromodels, can provide valuable information to understand the transport phenomena at pore scale in different process occurring in porous materials (food, timber, soils, etc.). Micromodels studies focus mainly on the observation of multi-phase flow, which presents a greater proximity to reality. The aim of this study was to study the process of flexography and its application in the manufacture of polyester resin transparent micromodels and its application to carrots. Materials used to implement a flexo station for micromodels construction were thermoregulated water bath, exposure chamber to UV light, photosensitive substance (photopolymer), RTV silicone polyester resin, and glass plates. In this paper, data on size distribution of a particular kind of carrot we used, and a transparent micromodel with square cross-section as well as a Log-normal pore size distribution with pore radii ranging from 10 to 110 µm (average of 22 µm and micromodel size of 10 × 10 cm) were built. Finally, it stresses that it has successfully implemented the protocol processing 2D polyester resin transparent micromodels.

Integration of cooking and vacuum cooling of carrots in a same vessel

Cooked vegetables are commonly used in the preparation of ready-to-eat foods. The integration of cooking and cooling of carrots and vacuum cooling in a single vessel is described in this paper. The combination of different methods of cooking and vacuum cooling was investigated. Integrated processes of cooking and vacuum cooling in a same vessel enabled obtaining cooked and cooled carrots at the final temperature of 10 ºC, which is adequate for preparing ready-to-eat foods safely. When cooking and cooling steps were performed with the samples immersed in boiling water, the effective weight loss was approximately 3.6%. When the cooking step was performed with the samples in boiling water or steamed, and the vacuum cooling was applied after draining the boiling water, water loss ranged between 15 and 20%, which caused changes in the product texture. This problem can be solved with rehydration using a small amount of sterile cold water. The instrumental textural properties of carrots samples rehydrated at both vacuum and atmospheric conditions were very similar. Therefore, the integrated process of cooking and vacuum cooling of carrots in a single vessel is a feasible alternative for processing such kind of foods.

Evaluating the potential of high pressure high temperature and thermal processing on volatile compounds, nutritional and structural properties of orange and yellow carrots

The present study compares the impact of thermal and high pressure high temperature(HPHT) processing on volatile profile (via a non-targeted headspace fingerprinting) and structural and nutritional quality parameter (via targeted approaches) of orange and yellow carrot purees. The effect of oil enrichment was also considered. Since oil enrichment affects compounds volatility, the effect of oil was not studied when comparing the volatile fraction. For the targeted part, as yellow carrot purees were shown to contain a very low amount of carotenoids, focus was given to orange carrot purees. The results of the non-targeted approach demonstrated HPHT processing exerts a distinct effect on the volatile fractions compared to thermal processing. In addition, different colored carrot varieties are characterized by distinct headspace fingerprints. From a structural point of view, limited or no difference could be observed between orange carrot purees treated with HPHT or HT processes, both for samples without and with oil. From nutritional point of view, only in samples with oil, significant isomerisation of all-trans-β-carotene occurred due to both processing. Overall, for this type of product and for the selected conditions, HPHT processing seems to have a different impact on the volatile profile but rather similar impact on the structural and nutritional attributes compared to thermal processing.

Time Evolution of Physicochemical Properties of Carrots During the Drying Process

This study is aimed to determine the properties of Nantes carrots while drying by hot air at three different temperatures (50, 60 and 70 ºC). The chemical properties evaluated were: moisture, pro- tein, fibre, ash, sugars and water activity, and the physical properties were: texture, color, density and porosity. The results showed that the drying at 70 ºC affected mostly the chemical properties analyzed. Regarding the texture, similar changes were recorded in terms of hardness, gumminess and chewiness at the temperature of 70 ºC that affected these properties the most. Regarding color, in general the vari- ations in a* and b* along drying were not meaningful, although some discoloration was observed (in- crease in L*). The porosity increased due to the decrease in humidity. The final porosity measured for the carrots dried at 70 ºC was; however, lower than those for 50 and 60 ºC.

Descriptions of types of principal American varieties of orange-fleshed carrots /

Prepared jointly by specialists of the United States Department of Agriculture, Cornell University, and the experiment stations of California, Louisiana, Minnesota, Texas, and Virginia.