ACE Research Vignette 047: What is the hard evidence on innovation and business productivity

This series of research vignettes is aimed at sharing current and interesting research findings from our team of international Entrepreneurship researchers. This vignette, written by Professor Beth Webster at Swinburne University of Technology, examines how innovation in small and medium size businesses affect their productivity.

To promote American business productivity, technology, and innovation : a guide to directories providing information on federal, state, and local initiatives.

Mode of access: Internet.

Use of business analysis in beef businesses to direct management practice change for climate adaptation outcomes

Beef businesses in northern Australia are facing increased pressure to be productive and profitable with challenges such as climate variability and poor financial performance over the past decade. Declining terms of trade, limited recent gains in on-farm productivity, low profit margins under current management systems and current climatic conditions will leave little capacity for businesses to absorb climate change-induced losses. In order to generate a whole-of-business focus towards management change, the Climate Clever Beef project in the Maranoa-Balonne region of Queensland trialled the use of business analysis with beef producers to improve financial literacy, provide a greater understanding of current business performance and initiate changes to current management practices. Demonstration properties were engaged and a systematic approach was used to assess current business performance, evaluate impacts of management changes on the business and to trial practices and promote successful outcomes to the wider industry. Focus was concentrated on improving financial literacy skills, understanding the business’ key performance indicators and modifying practices to improve both business productivity and profitability. To best achieve the desired outcomes, several extension models were employed: the ‘group facilitation/empowerment model’, the ‘individual consultant/mentor model’ and the ‘technology development model’. Providing producers with a whole-of-business approach and using business analysis in conjunction with on-farm trials and various extension methods proved to be a successful way to encourage producers in the region to adopt new practices into their business, in the areas of greatest impact. The areas targeted for development within businesses generally led to improvements in animal performance and grazing land management further improving the prospects for climate resilience.

Using the work system method with freshman information systems students

Recent surveys of information technology management professionals show that understanding business domains in terms of business productivity and cost reduction potential, knowledge of different vertical industry segments and their information requirements, understanding of business processes and client-facing skills are more critical for Information Systems personnel than ever before. In an attempt to restrucuture the information systems curriculum accordingly, our view it that information systems students need to develop an appreciation for organizational work systems in order to understand the operation and significance of information systems within such work systems.

Realidad empresarial. Gobierno vs las Pymes en el uso de la información para el desarrollo administrativo internacional y logístico

En el transcurso del desarrollos de este trabajo se puede observar el análisis del Departamento Administrativo Nacional de Estadística en Colombia (DANE), La Dirección de Impuestos y Aduanas Nacionales DIAN, el Departamento Nacional de Planeación DNP, La Superintendencia de Sociedades y Cámara de comercio) para entender si estas en un entorno actual a la realidad empresarial están ayudando o no a las PYMES en Colombia. Entiendo si presentan un buen servicio informativo para el apoyo estratégico y productivo desde la creación de estas mismas. Así mismo se analiza las puntos positivos y negativos que cada entidad representa hacia las PYMES y como es la percepción que las empresas tiene de las entidades gubernamentales, para lograr establecer las mejoras posibles, con el fin de manejar un mejor camino a mejorar el vínculo Logístico y administrativo en el entorno empresarial del sector privado y gubernamental.

Green noise or green value? Measuring the price effects of environmental certification in commercial buildings

This paper investigates the price effects of environmental certification on commercial real estate assets. It is argued that there are likely to be three main drivers of price differences between certified and non-certified buildings. First, certified buildings offer a bundle of benefits to occupiers relating to business productivity, image and occupancy costs. Second, due to these occupier benefits, certified buildings can result in higher rents and lower holding costs for investors. Third, certified buildings may require a lower risk premium. Drawing upon the CoStar database of US commercial real estate assets, hedonic regression analysis is used to measure the effect of certification on both rent and price. We first estimate the rental regression for a sample of 110 LEED and 433 Energy Star as well as several thousand benchmark buildings to compare the sample to. The results suggest that, compared to buildings in the same metropolitan region, certified buildings have a rental premium and that the more highly rated that buildings are in terms of their environmental impact, the greater the rental premium. Furthermore, based on a sample of transaction prices for 292 Energy Star and 30 LEED-certified buildings, we find price premia of 10% and 31% respectively compared to non-certified buildings in the same metropolitan area

Análise de desempenho de vendas em telecomunicações utilizando técnicas de mineração de dados

Nowadays, telecommunications is one of the most dynamic and strategic areas in the world. Organizations are always seeking to find new management practices within an ever increasing competitive environment where resources are getting scarce. In this scenario, data obtained from business and corporate processes have even greater importance, although this data is not yet adequately explored. Knowledge Discovery in Databases (KDD) appears then, as an option to allow the study of complex problems in different areas of management. This work proposes both a systematization of KDD activities using concepts from different methodologies, such as CRISP-DM, SEMMA and FAYYAD approaches and a study concerning the viability of multivariate regression analysis models to explain corporative telecommunications sales using performance indicators. Thus, statistical methods were outlined to analyze the effects of such indicators on the behavior of business productivity. According to business and standard statistical analysis, equations were defined and fit to their respective determination coefficients. Tests of hypotheses were also conducted on parameters with the purpose of validating the regression models. The results show that there is a relationship between these development indicators and the amount of sales

A competitiveness index for the regions of a country

Includes bibliography

Desempenho do consórcio de tomateiro e berinjeleira em função das épocas de transplante e de cultivo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Managing the impacts of wireless technology

This paper investigates and implicates how organisations renovate their service operations and improve business productivity in the context of wireless networks and mobile technologies. Drawing from two case studies conducted in healthcare institutions situated in southwest USA, the findings suggested that wireless networks and relevant technologies evidently enhanced business productivity and fundamentally changed service provision and, in turn, shaped or reshaped organisational images in the community. The implications reinforced the notions that technology could provide foundation for an organisation’s economic growth and that organisations’ business and IT strategies need to seriously consider aligning with this technological trend. For researchers, how organisations in different industries manoeuvre their ways around these technologies might provide interesting venues for future investigation.

Aplicações de Ferramentas Lean em uma Indústria de Transformação de Papel

Esta dissertação foi desenvolvida no âmbito do 2º ano do Mestrado em Engenharia Mecânica – Ramo de Gestão Industrial no Instituto Superior de Engenharia do Porto. Este projeto realizou-se em ambiente industrial, nomeadamente na Tubembal, S.A. uma empresa localizada no concelho da Trofa, distrito do Porto. Esta empresa dedica-se à transformação de papel e comércio de embalagens, produz tubos e cantoneiras de cartão e é atualmente a maior empresa do sector na Península Ibérica. Esta dissertação baseia-se na aplicação de ferramentas Lean, numa perspetiva de melhoria de um ambiente produtivo industrial, melhorando o desempenho dos processos existentes e consequentemente a produtividade da empresa em estudo, com o objetivo de a tornar mais competitiva num ambiente global. A metodologia Lean tem como principal objetivo a eliminação de desperdício em toda a cadeia de valor e neste sentido surge como fundamental numa cultura de melhoria contínua e focalização no cliente, que se pretende instalar nesta empresa. Foi realizada uma análise profunda a toda a cadeia de valor como forma de identificar os maiores desperdícios e posteriormente apresentadas medidas para combater estes mesmos desperdícios, podendo assim reduzir custos. No projeto de melhoria apresentado à organização constam como principais ações, a implementação da metodologia 5S’s como ferramenta essencial para mudança de hábitos dos funcionários e integração e envolvimento de todos num mesmo projeto comum, na busca da melhoria contínua. Procedeu-se ainda à simulação de algumas propostas de reorganização do layout de forma a encontrar aquela que minimizasse os custos com movimentações e garantisse um fluxo controlado e em segurança dos produtos e pessoas dentro da fábrica. As propostas apresentadas mostram que a reorganização do layout da fábrica pode trazer ganhos significativos para a empresa, redução direta no tempo perdido em deslocações e maior disponibilidade dos meios e consequente direta redução dos custos. Todas as propostas apresentadas visam a adaptação da empresa a um modelo mais dinâmico de negócio, capaz de responder rápida e eficazmente aos seus clientes, adaptando-se ao mercado e garantindo a sua sustentabilidade num futuro próximo.

Implementation of the CDM model to the analisys of the hotel sector

The main aim of this study was to determine the impact of innovation on productivity in service sector companies — especially those in the hospitality sector — that value the reduction of environmental impact as relevant to the innovation process. We used a structural analysis model based on the one developed by Crépon, Duguet, and Mairesse (1998). This model is known as the CDM model (an acronym of the authors’ surnames). These authors developed seminal studies in the field of the relationships between innovation and productivity (see Griliches 1979; Pakes and Grilliches 1980). The main advantage of the CDM model is its ability to integrate the process of innovation and business productivity from an empirical perspective.

Performance Benchmarking of Australian Business Regulation : Submission to the Productivity Commission

The need to “reduce red tape” and regulatory inconsistencies is a desirable outcome (OECD 1997) for developed countries. The costs normally associated with regulatory regimes are compliance costs and direct charges. Geiger and Hoffman (1998) have noted that the extent of regulation in an industry tends to be negatively associated with firm performance. Typically, approaches to estimation of the cost of regulations examine direct costs, such as fees and charges, together with indirect costs, such as compliance costs. However, in a fragmented system, such as Australia, costs can also be incurred due to procedural delays, either by government, or by industry having to adapt documentation for different spheres of government; lack of predictable outcomes, with variations occurring between spheres of government and sometimes within the same government agency; and lost business opportunities, with delays and red tape preventing realisation of business opportunities (OECD 1997). In this submission these costs are termed adaptation costs. The adaptation costs of complying with variations in regulations between the states has been estimated by the Building Product Innovation Council (2003) as being up to $600 million per annum for building product manufacturers alone. Productivity gains from increased harmonisation of the regulatory system have been estimated in the hundreds of millions of dollars (ABCB 2003). This argument is supported by international research which found that increasing the harmonisation of legislation in a federal system of government reduces what we have termed adaptation costs (OECD 2001). Research reports into the construction industry in Australia have likewise argued that improved consistency in the regulatory environment could lead to improvements in innovation (PriceWaterhouseCoopers 2002), and that research into this area should be given high priority (Hampson & Brandon 2004). The opinion of industry in Australia has consistently held that the current regulatory environment inhibits innovation (Manley 2004). As a first step in advancing improvements to the current situation, a summary of the current costs experienced by industry needs to be articulated. This executive summary seeks to outline these costs in the hope that the Productivity Commission would be able to identify the best tools to quantify the actual costs to industry.

Submission to the Productivity Commission issues paper business set-Up, transfer and closure

The Commission has been asked to identify appropriate options for reducing entry and exit barriers including advice on the potential impacts of the personal/corporate insolvency regimes on business exits...

Submission to the Productivity Commission draft report business set-up, transfer and closure

The Commission has released a Draft Report on Business Set-Up, Transfer and Closure for public consultation and input. It is pleasing to note that three chapters of the Draft Report address aspects of personal and corporate insolvency. Nevertheless, we continue to make the submission to national policy inquiries and discussions that a comprehensive review should be undertaken of the regulation of insolvency and restructuring in Australia. The last comprehensive review of the insolvency system was by the Australian Law Reform Commission (the Harmer Report) and was handed down in 1988. Whilst there have been aspects of our insolvency laws that have been reviewed since that time, none has been able to provide the clear and comprehensive analysis that is able to come from a more considered review. Such a review ought to be conducted by the Australian Law Reform Commission or similar independent panel set up for the task. We also suggest that there is a lack of data available to assist with addressing questions raised by the Draft Report. There is a need to invest in finding out, in a rigorous and informed way, how the current law operates. Until there is a willingness to make a public investment in such research with less reliance upon the anecdotal (often from well-meaning but ultimately inadequately informed participants and others) the government cannot be sure that the insolvency regime we have provides the most effective regime to underpin Australia’s commercial and financial dealings, nor that any change is justified. We also make the submission that there are benefits in a serious investigation into a merged regulatory architecture of personal and corporate insolvency and a combined personal and corporate insolvency regulator.