Predicting beef carcass retail products of Mediterranean buffaloes by real-time ultrasound measures

Twenty eight Mediterranean buffaloes bulls were scanned with real-time ultrasound (RTU), slaughtered, and fabricated into retail cuts to determine the potential for ultrasound measures to predict carcass retail yield. Ultrasound measures of fat thickness, ribeye area and rump fat thickness were recorded three to five days prior to slaughter. Carcass measurements were taken, and one side of each carcass was fabricated into retail cuts. Stepwise regression analysis was used to compare possible models for prediction of either kilograms or percent retail product from carcass mesaurements and ultrasound measures. Results indicate that possible prediction models for percent or kilograms of retail products using RTU measures were similar in their predictive power and accuracy when compared to models derived from carcass measurements. Both fat thickness and ribeye area were over-predicted when measured ultrasonically compared to measurements taken on the carcass in the cooler. The mean absolute differences for both traits are larger than the mean differences, indicating that some images were interpreted to be larger and some smaller than actual carcass measurements. Ultrasound measurements of REA and FT had positive correlations with carcass measures of the same traits (r=.96 for REA and r=.99 for FT). Standard errors of prediction currently are being used as the standard to certify ultrasound technicians for accuracy. Regression equations using live weight (LW), rib eye area (REAU) and subcutaneous fat thickness (FTU) between 12(th) and 13 (th) ribs and also over the biceps femoris muscle (FTP8) by ultrasound explained 95% of the variation in the hot carcass weight when measure immediately before slaughter.

Beef Carcass Contamination by Shiga Toxin-Producing Escherichia coli Strains in an Abattoir in Brazil: Characterization and Resistance to Antimicrobial Drugs

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Characterization of Escherichia coli isolated from carcasses of beef cattle during their processing at an abattoir in Brazil

Beef carcass sponge samples collected between March 2003 and August 2005 at an abattoir in Brazil were surveyed for the presence of Shiga toxin-producing Escherichia coli (STEC). Only one carcass among the 80 tested showed a STEC, stx2-encoding gene by PCR amplification. The frequency of carcass contamination by E. coli during processing was tested at three situations, respectively: preevisceration, postevisceration and postprocessing, during the rain and dry seasons. The prevalence of E. coli at the three points was of 30.0%, 70.0%, 27.5% in the rain season and of 22.5%, 55.0%, 17.5% during the dry season, respectively. The E. coli isolates exhibited a high level (45.0%) of multidrug resistance to two or more antimicrobial agents. (c) 2006 Elsevier B.V. All rights reserved.

Production systems - An example from Brazil

Important information about the Brazilian agribusiness, population and economy are presented in this paper, as well as details of beef production, market, industry and production system, to inform people involved in meat industry about details on demography, production, economy and production systems of a country that is the largest player in beef exports in the world and that uses, mostly, Bos indicus based bovine population, reared under pasture conditions, for meat production purposes. Herd size, genetic evaluation programs, quantity of beef produced and market is informed, with figures about the global and major players` production. Some discussion related to environmental concerns, methane emission and carbon fixation is also presented, as well as meat quality. Meat quality of fed animals is also compared with beef from animals that are raised in pasture conditions. (c) 2009 Elsevier Ltd. All rights reserved.

Whole-genome analysis for backfat thickness in a tropically adapted, composite cattle breed from Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Intake, live-weight gain and carcass characteristics of beef cattle given diets based on forage maize silage harvested at different stages of maturity

Advancing maturity of forage maize is associated with increases in the proportion of dry matter (DM) and starch, and decreases in the proportions of structural carbohydrates in the ensiled crop. This experiment investigated the effects of three maize silages of 291 (low), 339 (medium) and 393 (high) g DM per kg fresh weight on the performance of 48 Simmental. Holstein-Friesian cattle. Equal numbers of steers (mean start weight = 503 (s.d. 31.3) kg) and heifers (mean start weight = 378 (s.d. 11.2) kg) were offered individually isonitrogenous diets composed of the three silages plus a protein supplement with minerals once daily until slaughter at the target live weight of 575 and 475 kg for steers and heifers, respectively. Intake was reduced on the low diet (P < 0.01) compared with the other two treatments. Dietary starch intake increased by a total of 1 kg/day between low and medium diets but by only 0.2 kg/day between medium and high diets. Unlike starch intake, total neutral-detergent fibre intake showed no significant difference (P > 0.05) between diets. There were no differences in live-weight gain between treatments but differences (P < 0.05) in food conversion efficiency indicated relative gains of 115, 100 and 102 g gain per kg DM intake for diets low, medium and high, respectively. There were no differences between diets in carcass weights, fat score and overall conformation.

Performance and carcass characteristics of beef cattle fed with ammoniated marandugrass hay

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of genetic type and level of concentrate in the finishing diet on carcass and meat quality traits in beef heifers

Carcass and meat quality traits of thirty-six feedlot beef heifers from different genetic groups (GG) fed at two concentrate levels (CL) were evaluated using 12- Nellore (NE), 12 - 1/2Angus x 1/2Nellore (AN) and 12 - 1/2Simmental x 1/2Nellore (SN) animals. Six heifers of each GG were randomly assigned into one of two treatments: concentrate at 0.8% or 1.2% of body weight (BW). Heifers fed concentrate at 0.8% of BW had greater (P<0.05) dressing percentage. None of the proximate analysis components of the beef were affected (P>0.05) by either CL or GG. Heifers from the AN group had higher (P<0.05) carcass weights, 12th rib fat thickness and lower dressing percentage (P<0.05) compared to the other groups. NE heifers had greater WBSF values (P<0.05) than the other genetic groups. Data suggest that the concentrate level can be reduced without compromising meat quality traits. (C) 2011 Elsevier Ltd. All rights reserved.

Effects of GHR gene polymorphisms on growth and carcass traits in Zebu and crossbred beef cattle

The growth hormone receptor (GHR) is the cell surface receptor for growth hormone (GH) and is required for GH to carry out its effects on target tissues. The objectives of the present study were to estimate the allele and genotype frequencies of the GHR/Alu I gene polymorphism located in the regulatory region in beef cattle belonging to different genetic groups and to determine associations between this polymorphism and growth and carcass traits. Genotyping was performed on 384 animals, including 79 Nellore (Zebu), 30 Canchim (5/8 Charolais+3/8 Zebu), 30 Simmental X Nellore crossbred and 245 Angus x Nellore crossbred cattle. Alleles Alu I(+), Alu I(-) and Alu I(N)-null allele-were evidenced for the GHR/Alu I polymorphism and the frequency of the Alu I(N) allele was significantly higher than the frequency of the Alu I(+) and Alu I(-) alleles in all genetic groups. Genotype Alu I(N/N) of the GHRIAlu I predominated in Nellore animals, while the Alu I(N/+) and Alu I(N/-) predominated in the other genetic groups. In the association studies, traits of interest were analyzed using the General Linear Model (GLM) procedure of the SAS program and least squares means of the genotypes were compared by the Tukey test. Significant associations (P < 0.05) were observed between the Alu I(N/N) genotype of the GHRIAlu I polymorphism and lower weight gain and body weight at slaughter, although a confounding between genotypes and genetic groups may have occurred. (c) 2005 Elsevier B.V. All rights reserved.

Effects of polymorphic microsatellites in the regulatory region of IGF1 and GHR on growth and carcass traits in beef cattle

Growth hormone (GH), insulin-like growth factors 1 and 2 (IGF1 and IGF2) and their associated binding proteins and transmembrane receptors (GHR, IGF1R and IGF2R) play an important role in the physiology of mammalian growth. The objectives of the present study were to estimate the allele and genotype frequencies of microsatellite markers located in the 5'-regulatory region of the IGF1 and GHR genes in beef cattle belonging to different genetic groups and to determine effects of these markers on growth and carcass traits in these animals under an intensive production system. For this purpose, genotyping was performed on 384 bulls including 79 Nellore, 30 Canchim (5/8 Charolais + 3/8 Zebu) and 275 crossbred animals originating from crosses of Simmental (1/2 Simmental, n = 30) and Angus (1/2 Angus, n = 245) sires with Nellore females. The effects of substituting L allele for S allele of GHR microsatellite across Nellore, Canchim and 1/2 Angus were significant for weight gain and body weight (P < 0.05). The IGF1 microsatellite allele substitutions of 229 for 225 within Nellore group and of 225 for 229 within 1/2 Angus were not significant for any of the traits.

Association between IGF-I, IGF-IR and GHRH gene polymorphisms and growth and carcass traits in beef cattle

Molecular biology techniques are of help in genetic improvement since they permit the identification, mapping and analysis of polymorphisms of genes encoding proteins that act on metabolic pathways involved in economically interesting traits. The somatotrophic axis, which essentially consists of growth hormone releasing hormone (GHRH), growth hormone (GH), insulin-like growth factors I and II (IGF-I and IGF-II), and their associated binding proteins and receptors (GHRHR, GHR, IGF-IR and IGF-IIR), plays a key role in the metabolism and physiology of mammalian growth. The objectives of the present study were to estimate the allele and genotype frequencies of the IGF-I/SnaBI, IGF-IR/TaqI and GHRH/HaeIII gene polymorphisms in different genetic groups of beef cattle and to determine associations between these polymorphisms and growth and carcass traits. For this purpose, genotyping was performed on 79 Nellore animals, 30 Canchim (5/8 Charolais+3/8 Zebu) animals and 275 crossbred cattle originating from the crosses of Simmental (n=30) and Angus (n=245) sires with Nellore females. In the association studies, traits of interest were analyzed using the GLM procedure of SAS and least square means of the genotypes were compared by the Tukey test. Associations of IGF-I/SnaBI genotypes with body weight and subcutaneous backfat were significant (p < 0.05), and nearly significant for longissimus dorsi area (p=0.06), with the 1313 genotype being favorable compared to the AB genotype. No significant associations were observed between this polymorphism and weight gain or carcass yield (P > 0.05). The IGF-IR/TaqI and GHRH/HaeIII polymorphisms showed no association with production traits. (c) 2004 Elsevier B.V All rights reserved.