Urea-based constructs readily amplify and attenuate nonlinear optical activity in response to H-bonding and anion recognition

Urea-based molecular constructs are shown for the first time to be nonlinear optically (NLO) active in solution. We demonstrate self-assembly triggered large amplification and specific anion recognition driven attenuation of the NLO activity. This orthogonal modulation along with an excellent nonlinearity-transparency trade-off makes them attractive NLO probes for studies related to weak self-assembly and anion transportation by second harmonic microscopy.

Triarylborane-Appended New Triad and Tetrad: Chromogenic and Fluorogenic Anion Recognition

Facile synthesis of triad 3 and tetrad 4 incorporating -B(Mes)(2) (Mes = mesityl (2,4,6-trimethylphenyl)), boron dipyrromethene (BODIPY), and triphenylamine is reported. Introduction of two dissimilar acceptors (triarylborane and BODIPY) on a single donor resulted in two distinct intramolecular charge transfer processes (amine-to-borane and amine-to-BODIPY). The absorption and emission properties of the new triad and tetrad are highly dependent on individual building units. The nature of electronic communication among the individual fluorophore units has been comprehensively investigated and compared with building units. Compounds 3 and 4 showed chromogenic and fluorogenic responses for small anions such as fluoride and cyanide.

The Use of Electrospray Mass Spectrometry to Determine Speciation in a Dynamic Combinatorial Library for Anion Recognition

The composition of a dynamic mixture of similar 2,2'-bipyridine complexes of iron(II) bearing either an amide (5-benzylamido-2,2'-bipyridine and 5-(2-methoxyethane)amido-2,2'-bipyridine) or an ester (2,2'-bipyridine-5-carboxylic acid benzylester and 2,2'-bipyridine-5-carboxylic acid 2-methoxyethane ester) side chain have been evaluated by electrospray mass spectroscopy in acetonitrile. The time taken for the complexes to come to equilibrium appears to be dependent on the counteranion, with chloride causing a rapid redistribution of two preformed heteroleptic complexes (of the order of 1 hour), whereas the time it takes in the presence of tetrafluoroborate salts is in excess of 24^^h. Similarly the final distribution of products is dependent on the anion present, with the presence of chloride, and to a lesser extent bromide, preferring three amide-functionalized ligands, and a slight preference for an appended benzyl over a methoxyethyl group. Furthermore, for the first time, this study shows that the distribution of a dynamic library of metal complexes monitored by ESI-MS can adapt following the introduction of a different anion, in this case tetrabutylammonium chloride to give the most favoured heteroleptic complex despite the increasing ionic strength of the solution. 

Anion recognition and transport properties of sulfamide-, phosphoric triamide- and thiophosphoric triamide-based receptors

Studies of sulfamide, phosphoric triamide and thiophosphoric triamidebased organocatalysts show that the phosphorus containing systems are effective new hydrogen bonding motifs for the recognition and transport of anions.

Electrochemical anion recognition with ferrocene functionalised macrocycles

The syntheses and characterization of two new redox active cyclam ligands ferrocenylmethyl-(6-methyl-1,4,8,11-tetraazacyclotetradec-6-yl)-amine(L-3) and 1, 1'-ferrocenylmethyl-bis(6-methyl-1,4,8,11-tetraazacyclotetradec-6-yl)-amine (L-4) are reported. The compounds each possess a ferrocenyl group bearing one (L-3) or two (L-4) appended macrocycles linked by their exocyclic amino groups and the crystal structures of both compounds have been determined. Anion binding of L-3 and L-4 was investigated by electrochemical titrations where H-bonding to each macrocycle causing a shift in the Fc(+/0) redox potential was used as a reporter of guest binding. The Zn-II complex of L-3 has also been isolated and characterized structurally. These compounds were analysed for their capacity to electrochemically recognize anions in both aqueous and non-aqueous solution. We have found that L-3, L-4 and [ZnL3-](2+) sense Cl- and AcO- anions in MeCN-CH2Cl2, a function that is lost in aqueous solution.

Exploiting the 1,2,3-triazolium motif in anion-templated formation of a bromide-selective rotaxane host assembly

Stimulated by the efficacy of copper (I) catalysed Huisgen-type 1,3-dipolar cycloaddition of terminal alkynes and organic azides to generate 1,4-disubstituted 1,2,3-triazole derivatives, the importance of ‘click’ chemistry in the synthesis of organic and biological molecular systems is ever increasing.[1] The mild reaction conditions have also led to this reaction gaining favour in the construction of interlocked molecular architectures.[2-4] In the majority of cases however, the triazole group simply serves as a covalent linkage with no function in the resulting organic molecular framework. More recently a renewed interest has been shown in the transition metal coordination chemistry of triazole ligands.[3, 5, 6] In addition novel aryl macrocyclic and acyclic triazole based oligomers have been shown to recognise halide anions via cooperative triazole C5-H….anion hydrogen bonds.[7] In light of this it is surprising the potential anion binding affinity of the positively charged triazolium motif has not, with one notable exception,[8] been investigated. With the objective of manipulating the unique topological cavities of mechanically bonded molecules for anion recognition purposes, we have developed general methods of using anions to template the formation of interpenetrated and interlocked structures.[9-13] Herein we report the first examples of exploiting the 1,2,3-triazolium group in the anion templated formation of pseudorotaxane and rotaxane assemblies. In an unprecedented discovery the bromide anion is shown to be a superior templating reagent to chloride in the synthesis of a novel triazolium axle containing [2]rotaxane. Furthermore the resulting rotaxane interlocked host system exhibits the rare selectivity preference for bromide over chloride...

Ditopic molecular architectures for the recognition of anionic species

Dissertation presented to obtain the Ph.D degree in Chemistry

Anion-templated assembly of pseudorotaxanes: importance of anion template, strength of ion-pair thread association, and macrocycle ring size

A wide range of pseuclorotaxane assemblies containing positively charged pyridinium, pyridinium nicotinamide, imidazolium, benzimidazolium and guanidinium threading components, and macrocyclic isophthalamide polyether ligands have been prepared using a general anion templation procedure. In noncompetitive solvent media, coupling halide anion recognition by a macrocyclic ligand with ion-pairing between the halide anion and a strongly associated cation provides the driving force for interpenetration. Extensive solution H-1 NMR binding studies, thermodynamic investigations, and single-crystal X-ray structure determinations reveal that the nature of the halide anion template, strength of the ion-pairing between the anion template and the cationic threading component, and to a lesser extent favorable second sphere pi-pi aromatic stacking interactions between the positively charged threading component and macrocyclic ligand, together with macrocyclic ring size, affect the efficacy of pseudorotaxane formation.

Metalloporphyrin anion sensors: the effect of the metal centre on the anion binding properties of amide-functionalised and tetraphenyl metalloporphyrins

This article describes the synthesis and anion binding properties of a series of ‘picket fence’ metalloporphyrin complexes, within which the metal centre is systematically varied. The porphyrin structure contains four amide bonds and is the same for each metal. The anion binding properties of these receptors are further contrasted with those of their tetraphenylporphyrin congeners to elucidate both the effect of the metal centre and the influence of the amide groups on the anion recognition process. Anion binding was demonstrated using UV/visible and 1H NMR spectroscopies, electrochemistry and luminescence. The metal centre was found to be highly influential in the strength and selectivity of binding; for example, the cadmium and mercury complexes exhibited far greater affinities for anions than the zinc complexes in competitive solvents such as DMSO. The amide functionalities were found to enhance the anion binding process.

Sensitive turn-on fluorescent detection of cyanide based on the dissolution of fluorophore functionalized gold nanoparticles

We report a simple fluorescent method for sensitive cyanide detection based on the dissolution of Rhodamine B-adsorbed gold nanoparticles by cyanide.

Turn-on fluorescent cyanide sensor based on copper ion-modified CdTe quantum dots

A new fluorescent sensor for the sensitive and selective detection of cyanide (CN-) in aqueous media was developed herein. The sensing approach is based on CN--modulated quenching behavior of Cu2+ toward the photoluminescence (PL) of CdTe quantum dots (QDs). In the presence of CN-, the PL of QDs that have been quenched by Cu2+ was found to be efficiently recovered, which then allows the detection of CN- in a very simple approach. Experimental results showed that the pH of the buffer solution, concentration of copper ions, and size of CdTe QDs all influenced the response of the sensor to CN-. Under the optimal conditions, a good linear relationship between the PL intensity and the concentration of CN- can be obtained in the range of 3.0 x 10(-7) to 1.2 x 10(-5) M, with a detection limit as low as 1.5 x 10(-7) M. In addition, the present fluorescent sensor possesses remarkable selectivity for cyanide over other anions, and negligible influences were observed on the cyanide detection by the coexistence of other anions or biological species (such as albumin and typical blood constituents).

A retrievable and highly selective fluorescent probe for monitoring dihydrogen phosphate ions based on a naphthalimide framework

A novel selective fluorescent chemosensor based on naphthalimide derivatives (AN-SB) was synthesized and characterized. Once combined with Cu2+, compound AN-SB could give rise to a visible yellow to orange color change and fluorescence quenching, while other metal ions showed subtle disturbance. The complex (AN-SB-Cu2+) formed by Cu2+ and AN-SB displayed high specificity for H2PO4-. Among the various anions, only H2PO4- induced the revival of color and fluorescence of AN-SB, resulting in "off-on" type sensing of H2PO4- anion. The signal transduction occured via reversible formation-separation of complex AN-SB-Cu2+, however, slight changes were observed in the presence of other anions. (C) 2013 Elsevier B.V. All rights reserved.

Receptores de aniões baseados em azacalix[4]arenos e isoftalamidas

Nesta tese, desenvolvida no âmbito do Programa Doutoral em Química da Universidade de Aveiro, foram desenvolvidos novos receptores sintéticos construídos a partir da plataforma macrocíclica tetraazacalix[2]areno[2]triazina ou do fragmento de isoftalamida. Ambas as unidades estruturais foram decora-das com grupos de reconhecimento molecular baseados em grupos amida e/ou ureia com o objectivo de actuarem como receptores selectivos de aniões com importância biológica ou farmacológica, incluindo acetato, oxalato, malo-nato, succinato, glutarato, diglicolato, L- e D-NHBoc-alanina, (S)- e (R)-fenilpro-panoato, (S,S)- e (R,R)-tartarato, fumarato, maleato, Cl-, HCO3-, H2PO4-, HSO4- e SO42-. No Capítulo 1 é efectuada uma revisão bibliográfica dos desenvolvimentos recentes na síntese, caracterização estrutural e aplicações de receptores fun-cionais relacionados com os desenvolvidos no âmbito desta tese, com especial incidência para aqueles que foram estudados como receptores de aniões. Neste domínio, enquanto que receptores derivados da isoftalamida têm sido bastante estudados ao longo das últimas décadas, o desenvolvimento de receptores de aniões inspirados em heteracalix[2]areno[2]triazinas ainda se encontra a dar os primeiros passos. No Capítulo 2 é apresentada a síntese de quatro novos macrociclos derivados de tetraazacalix[2]areno[2]triazina incorporando um ou dois braços de L-alanina (A1, A2) ou de L-leucina (L1, L2) nos anéis benzénicos, e derivados com grupos amida como unidades de reconhecimento. Adicionalmente, são também apresentados dois novos azacalix[2]areno[2]triazinas contendo um (U1) ou dois (U2) braços com grupos ureia substituídos com um grupo (S)-metilbenzílico. Foram ainda preparados os macrociclos A2Me4 e U2Me4 por metilação dos átomos de azoto em ponte de A2 e U2, os quais foram posterior-mente utilizados em estudos de associação. Os compostos sintetizados foram caracterizados através de técnicas espectroscópicas, complementadas por difracção de raios X de cristal único no caso de U2Me4. O Capítulo 3 contempla os estudos de reconhecimento molecular entre os macrociclos A2Me4 e U2Me4 e os aniões derivados de ácidos mono- e dicarbo-xílicos alifáticos, ácidos carboxílicos isoméricos (enantiómeros e isómeros geométricos), aminoácidos e polioxaniões acima referidos, excepto HCO3-. Os estudos de associação foram realizados através de técnicas de titulação por RMN 1H com determinação das respectivas constantes de afinidade. Todas as associações estudadas apresentaram uma estequiometria receptor-substrato 1:1 com excepção das associações formadas entre A2Me4 e U2Me4 com H2PO4- (1:2). Os complexos A2Me4∙SO42- e U2Me4∙(H2PO4-)2 são os mais estáveis com constantes de associação de 7,4 × 104 M-1 e superior a 105 M-2, respectivamente. O reconhecimento dos dicarboxilatos ocorreu através dos dois braços do macrociclo, com os aniões com grupos carboxilato separados por cadeias alifáticas mais compridas (glutarato e diglicolato) apresentando um melhor ajuste aos braços de A2Me4 e U2Me4. Não foi observado reconheci-mento enantiosselectivo de aniões. Em contraste, as constantes de afinidade para as associações com os aniões dos isómeros cis (maleato) e trans (fumarato) do ácido but-2-enodióico, de 89 e 4920 M-1 para A2Me4 e 481 e 4007 M-1 para U2Me4, respectivamente, sugerem selectividade de ambos os receptores para o fumarato. No Capítulo 4 é descrita a síntese de nove receptores acíclicos incorporando a unidade de isoftalamida (Iso-1 a Iso-9) e braços laterais com grupos de reconhecimento de aniões. Enquanto que o receptor Iso-1 possui como unida-des de reconhecimento apenas grupos amida, os receptores Iso-2, Iso-3, Iso-5, Iso-6, Iso-7 e Iso-9 possuem grupos amida e ureia, e os derivados Iso-4 e Iso-8 grupos amida e sulfonilureia. Em cada um destes compostos, os grupos de reconhecimento estão separados por uma cadeia etilénica cuja flexibilidade confere um melhor ajuste com os aniões. Os derivados de isoftalamida preparados foram caracterizados através de técnicas espectroscópicas. No Capítulo 5 são apresentados os estudos de associação realizados por técnicas de titulação por RMN 1H entre Iso-1, Iso-2, Iso-4, Iso-6 e Iso-8 com os aniões H2PO4-, HCO3-, Cl- e oxalato. Os receptores Iso-1, Iso-2 e Iso-6 apresentaram maior afinidade para o dianião, com valores de Kass de 6100, 7800 e 9800 M-1 respectivamente, e menor para Cl- (17 < Kass < 19 M-1). Foram sempre formadas associações mais estáveis com H2PO4- (294 < Kass < 427 M-1) comparativamente a HCO3-, sendo que a associação mais forte com este últi-mo foi determinada com Iso-2 (Kass = 95 M-1). As moléculas de Iso-4 e Iso-8 sofreram desprotonação dos grupos sulfonilureia na presença de todos os aniões excepto de Cl-. No Capítulo 6 apresentam-se as conclusões gerais e no Capítulo 7 descrevem-se os procedimentos experimentais e também os dados espectroscópicos dos produtos obtidos.

Carboxylate anions binding and sensing by a novel tetraazamacrocycle containing ferrocene as receptor

A tetraazamacrocycle containing ferrocene moieties has been synthesized and characterized. The tetraprotonated form of this compound was evaluated as a receptor (R) for anion recognition of several substrates (S), Cl-, PF6-, HSO4-, H2PO4- and carboxylates, such as p-nitrobenzoate (p-nbz(-)), phthalate (ph(2-)), isophthalate (iph(2-)) and dipicolinate (dipic(2-)). H-1 NMR titrations in CD3OD indicated that this receptor is not suitable for recognizing HSO4- and H2PO4-, but weakly binds p-nbz(-), and strongly interacts with ph(2-), dipic(2-), and iph(2-) anions forming 1 : 2 assembled species. The largest beta(2) binding constant was determined for ph(2-), followed by dipic(2-) and finally iph(2-). The effect of the anionic substrates on the electron-transfer process of the ferrocene units of R was evaluated using cyclic voltammetry (CV) and square wave voltammetry (SWV) in methanol solution and 0.1 mol dm(-3) (CH3)(4)NCl as the supporting electrolyte. Titrations of the receptor were undertaken by addition of anion solutions in their tetrabutylammonium or tetramethylammonium forms. The protonated ligand exhibits a reversible voltammogram, which shifts cathodically in the presence of the substrates. The data revealed kinetic constraints in the formation of the receptor/substrate entity for dipic(2-), ph(2-) and iph(2-) anions, but not for p-nbz(-). In spite of the slow kinetics of assembled species formation with the ph(2-) substrate, this anion provides the largest redox-response when the supramolecular entity is formed, followed by dipic(2-), iph(2-) and finally p-nbz(-) anions. This trend is in agreement with the H-1 NMR results and the values of the binding constants. Single crystal X-ray structures of the receptor with PF6-, ph(2-), iph(2-) and p-nbz(-) were carried out and showed that supermolecules with a RS2 stoichiometry are formed with the first three anions, but RS4 with p-nbz(-). In all cases the binding occurs outside the macrocyclic cavity via N-H center dot center dot center dot O=C hydrogen bonds for carboxylate anions and N - H center dot center dot center dot F hydrogen bonds for the PF6- anion, which is in agreement with the solution results. The macrocyclic framework adopts different conformations in order to interact with each substrate having Fe center dot center dot center dot Fe intramolecular distances ranging from 10.125(14) to 12.783(15) angstrom.