An analytic method to compute the stress dependence on the dimensions and its influence in the characteristics of triple gate devices

Triple-gate devices are considered a promising solution for sub-20 nm era. Strain engineering has also been recognized as an alternative due to the increase in the carriers mobility it propitiates. The simulation of strained devices has the major drawback of the stress non-uniformity, which cannot be easily considered in a device TCAD simulation without the coupled process simulation that is time consuming and cumbersome task. However, it is mandatory to have accurate device simulation, with good correlation with experimental results of strained devices, allowing for in-depth physical insight as well as prediction on the stress impact on the device electrical characteristics. This work proposes the use of an analytic function, based on the literature, to describe accurately the strain dependence on both channel length and fin width in order to simulate adequately strained triple-gate devices. The maximum transconductance and the threshold voltage are used as the key parameters to compare simulated and experimental data. The results show the agreement of the proposed analytic function with the experimental results. Also, an analysis on the threshold voltage variation is carried out, showing that the stress affects the dependence of the threshold voltage on the temperature. (C) 2011 Elsevier Ltd. All rights reserved.

On the application of a new analytic method to the theory of curves and curved surfaces.

Mode of access: Internet.

A systematic and feasible method for computing nuclear contributions to electrical properties of polyatomic molecules

An analytic method to evaluate nuclear contributions to electrical properties of polyatomic molecules is presented. Such contributions control changes induced by an electric field on equilibrium geometry (nuclear relaxation contribution) and vibrational motion (vibrational contribution) of a molecular system. Expressions to compute the nuclear contributions have been derived from a power series expansion of the potential energy. These contributions to the electrical properties are given in terms of energy derivatives with respect to normal coordinates, electric field intensity or both. Only one calculation of such derivatives at the field-free equilibrium geometry is required. To show the useful efficiency of the analytical evaluation of electrical properties (the so-called AEEP method), results for calculations on water and pyridine at the SCF/TZ2P and the MP2/TZ2P levels of theory are reported. The results obtained are compared with previous theoretical calculations and with experimental values

A systematic and feasible method for computing nuclear contributions to electrical properties of polyatomic molecules

An analytic method to evaluate nuclear contributions to electrical properties of polyatomic molecules is presented. Such contributions control changes induced by an electric field on equilibrium geometry (nuclear relaxation contribution) and vibrational motion (vibrational contribution) of a molecular system. Expressions to compute the nuclear contributions have been derived from a power series expansion of the potential energy. These contributions to the electrical properties are given in terms of energy derivatives with respect to normal coordinates, electric field intensity or both. Only one calculation of such derivatives at the field-free equilibrium geometry is required. To show the useful efficiency of the analytical evaluation of electrical properties (the so-called AEEP method), results for calculations on water and pyridine at the SCF/TZ2P and the MP2/TZ2P levels of theory are reported. The results obtained are compared with previous theoretical calculations and with experimental values

Induced variational method from supersymmetric quantum mechanics and the screened Coulomb potential

The formalism of supersymmetric quantum mechanics supplies a trial wave function to be used in the variational method. The screened Coulomb potential is analyzed within this approach. Numerical and exact results for energy eigenvalues are compared.

Rapid determination of zinc in foods by flow injection analysis with flame AAS using gradient calibration method

A calibration method was developed using flow injection analysis (FI) with a Gradient Calibration Method (GCM). The method allows the rapid determination of zinc In foods (approximately 30 min) after treatment with concentrated sulphuric acid and 30% hydrogen peroxide, and analysis with flame atomic absorption spectrometry (FAAS). The method provides analytical results with a relative standard deviation of about 2% and requires less time than by conventional FI calibration. The electronic selection of different segments along the gradient and monitoring of the technique covers wide concentration ranges while maintaining the inherent high precision of flow injection analysis. Concentrations, flow rates, and flow times of the reagents were optimized in order to obtain best accuracy and precision. Flow rates of 10 mL/min were selected for zinc. In addition, the system enables electronic dilution and calibration where a multipoint curve can be constructed using a single sample injection.

Development and validation of an UV spectrophotometric method for determination of gatifloxacin in tablets

A simple, sensitive and accurate spectrophotometric method was developed for the assay of gatifloxacin in raw material and tablets. Validation of the method yielded good results concerning range, linearity, precision and accuracy. The absorbance was measured at 287 nm for gatifloxacin tablet solutions. The linearity range was found to be 4.0-14.0 μg/mL for gatifloxacin. It was also found that the excipients in the commercial tablets did not interfere with the method.

Validation of UV spectrophotometric method for determination of lomefloxacin in pharmaceutical dosage form

A simple and reproducible method was developed for the assay of lomefloxacin in tablets. The excipients in the commercial tablet preparation did not interfere with the assay. Beer's law is obeyed in the range 2.0-9.0 μg.mL-1 at λmax 280 nm. The molar absorptivity was calculated. Six triplicate analyses of solutions containing six different concentrations of the examined drug were carried out and gave a mean correlation coefficient 0.9997. The proposed method was applied to the determination of the examined drug in coated tablet and the results demonstrated that the method is equally accurate, precise and reproducible as the official methods.

Development of an analytical method for the quantification of pfaffic acid in Brazilian ginseng (Hebanthe eriantha)

Hebanthe eriantha (Poir.) Pedersen (Amaranthaceae), which is known as Brazilian ginseng is widely used in folk medicine as an aphrodisiac and antidiabetic tonic. The anti-tumor activity, attributed to the pfaffic acid present in roots of H. eriantha, is responsible for the great interest in the commercialization of this species. In Brazil, the species H. eriantha is mainly used in commercial preparations, although other plants of the genus Pfaffia and Hebanthe have been marketed as Pfaffia paniculata or Brazilian ginseng. The pfaffic acid present in the roots is mainly conjugated with sugars (pfaffosides) and can be used as an active marker of H. eriantha, which helps to differentiate this species from others marketed as Brazilian ginseng. The main objective of this study was to develop and validate a liquid chromatographic method to quantify pfaffic acid in the roots of H. eriantha. The extraction and hydrolysis conditions were optimized using an univariate and experimental design, respectively, and the quantification of pfaffic acid by high performance liquid chromatography with diode-array detection (HPLC-DAD) was validated. This method was used to evaluate the pfaffic acid content in 30 different genotypes of the species from a germplasm collection. The content of pfaffic acid ranged from 0.97 to 4.29% (w/w) on a dry weight basis. © 2013 Elsevier B.V.

Gravitational instability of simply rotating AdS black holes in higher dimensions

We study the stability of AdS black holes rotating in a single two-plane for tensor-type gravitational perturbations in D > 6 space-time dimensions. First, by an analytic method, we show that there exists no unstable mode when the magnitude a of the angular momentum is smaller than r(h)(2)/R, where r(h) is the horizon radius and R is the AdS curvature radius. Then, by numerical calculations of quasinormal modes, using the separability of the relevant perturbation equations, we show that an instability occurs for rapidly rotating black holes with a > r(h)(2)/R, although the growth rate is tiny (of order 10(-12) of the inverse horizon radius). We give numerical evidence indicating that this instability is caused by superradiance.

Explicit series solution for a glucose-induced electrical activity model of pancreatic beta-cells

In this work, we present the explicit series solution of a specific mathematical model from the literature, the Deng bursting model, that mimics the glucose-induced electrical activity of pancreatic beta-cells (Deng, 1993). To serve to this purpose, we use a technique developed to find analytic approximate solutions for strongly nonlinear problems. This analytical algorithm involves an auxiliary parameter which provides us with an efficient way to ensure the rapid and accurate convergence to the exact solution of the bursting model. By using the homotopy solution, we investigate the dynamical effect of a biologically meaningful bifurcation parameter rho, which increases with the glucose concentration. Our analytical results are found to be in excellent agreement with the numerical ones. This work provides an illustration of how our understanding of biophysically motivated models can be directly enhanced by the application of a newly analytic method.

Les enjeux spatiaux et sociaux d'une dynamique interethnique en transition dans les quartiers de centre-ville. La construction des diverses formes de représentation dans la manière de définir un quartier de Nice.

Résumé Cette thèse de doctorat se fixe comme objectif général de définir la spécificité d'un espace urbain situé en centre-ville à travers sa dynamique sociale et interethnique. Il s'agit de relever les différentes formes et manifestations ethniques, mais également de comprendre la manière dont est vécue cette socialité, tout en tenant compte du contexte urbain dans lequel elles se situent. La particularité de ce travail est le fait de proposer une démarche alliant deux disciplines à savoir la géographie et la sociologie, dans le but de proposer une recherche transdisciplinaire, avec comme conséquence la mise en oeuvre d'une démarche commune nourrie des deux disciplines. Les quartiers ethniques situés en centre-ville ne se présentent pas comme des espaces figés, puisque des changements fréquents sont observés aussi bien au niveau de leur population que de l'affectation des locaux commerciaux et des logements. Ils semblent davantage se caractériser comme des « espaces à l'avenir indéterminé » dans le sens où leur avenir aussi bien au niveau de leur structure urbaine que de leurs rapports sociaux ne peut être prévisible et qu'ils sont par ailleurs susceptibles d'être soumis à de nombreux changements, d'où l'idée également d' « espaces en mutations ». Pour aborder ces thématiques de recherche, nous avons opté pour une étude fondée sur le principe de la représentation et de l'une des formes essentielles à travers lesquelles elles se produisent et se manifestent, à savoir les images. Cette recherche privilégie ainsi une analyse dynamique du phénomène interethnique, l'inscrivant dans le courant constructiviste qui s'intéresse notamment à l'étude des pratiques des acteurs sociaux et leurs représentations, dans le sens qu'elles sont le fruit d'une construction sociale. Dans ce type de démarche analytique, il s'agit de prendre en considération à la fois l'analyse du chercheur et la réalité objective et subjective du vécu des acteurs urbains qui regroupent les riverains, les commerçants, les membres associatifs, les politiques et les médias. C'est justement l'association de ces deux approches qui permet de définir un quartier urbain. Abstract "The spatial and social stakes of an interethnic dynamics in transition in the downtown area. The construction of the various forms of representations in order to define an urban quarter in Nice" The general objective of this PHD is to define the specificity of an urban space located in the downtown area with social and interethnic dynamics. Specifically the diverse ethnic form and sign to include the understanding mariner where society has lived in a specific urban context. The particularity of this work is to advance an analytic method using two disciplines: geography and sociology, in order to bring up a transdisciplinarian research with a common method. The ethnic quarters in the inner-city area are not presented as fixed spaces, since frequent changes were observed in the population level and at the allotment level of the commercial premises and the lodgings. Defined as "undetermined future spaces" as their future in the urban structure or the social relations can not be foresee and are supposed to be subjective to many changes. Therefore speaking of "mutations spaces". The option of this type of thematic research is the study of the principle of representation and essential form which shows and produces the images. Research promotes a dynamic analyses of the interethnic phenomena, inside the constructivist which is focused the practices of social actors, their own representations, and products of a social construction. The production of analytical approach is necessary in order to consider the analyses of the research worker and the objective and subjective reality of the life of the urban actors. It gathers the residents, tradesmen, members of associations, politicians and the press. The association of these types of approach define a urban quarter.

A systematic review of longitudinal population-based studies on the predictors of smoking cessation in adolescent and young adult smokers.

OBJECTIVE: To describe the determinants of self-initiated smoking cessation of duration of at least 6 months as identified in longitudinal population-based studies of adolescent and young adult smokers. METHODS: A systematic search of the PubMed and EMBASE databases using smoking, tobacco, cessation, quit and stop as keywords was performed. Limits included articles related to humans, in English, published between January 1984 and August 2010, and study population aged 10-29 years. A total of 4502 titles and 871 abstracts were reviewed independently by 2 and 3 reviewers, respectively. Nine articles were retained for data abstraction. Data on study location, timeframe, duration of follow-up, number of data collection points, sample size, age/grade of participants, number of quitters, smoking status at baseline, definition of cessation, covariates and analytic method were abstracted from each article. The number of studies that reported a statistically significant association between each determinant investigated and cessation were tabulated, from among all studies that assessed the determinant. RESULTS: Despite heterogeneity in methods across studies, five factors robustly predicted quitting across studies in which the factor was investigated: not having friends who smoke, not having intentions to smoke in the future, resisting peer pressure to smoke, being older at first use of cigarette and having negative beliefs about smoking. CONCLUSIONS: The literature on longitudinal predictors of cessation in adolescent and young adult smokers is not well developed. Cessation interventions for this population will remain less than optimally effective until there is a solid evidence base on which to develop interventions.

Fractional slot permanent magnet synchronous motors for low speed applications

This study compares different rotor structures of permanent magnet motors with fractional slot windings. The surface mounted magnet and the embedded magnet rotor structures are studied. This thesis analyses the characteristics of a concentrated two-layer winding, each coil of which is wound around one tooth and which has a number of slots per pole and per phase less than one (q < 1). Compared to the integer slot winding, the fractional winding (q < 1) has shorter end windings and this, thereby, makes space as well as manufacturing cost saving possible. Several possible ways of winding a fractional slot machine with slots per pole and per phase lessthan one are examined. The winding factor and the winding harmonic components are calculated. The benefits attainable from a machine with concentrated windingsare considered. Rotor structures with surface magnets, radially embedded magnets and embedded magnets in V-position are discussed. The finite element method isused to solve the main values of the motors. The waveform of the induced electro motive force, the no-load and rated load torque ripple as well as the dynamic behavior of the current driven and voltage driven motor are solved. The results obtained from different finite element analyses are given. A simple analytic method to calculate fractional slot machines is introduced and the values are compared to the values obtained with the finite element analysis. Several different fractional slot machines are first designed by using the simple analytical methodand then computed by using the finite element method. All the motors are of thesame 225-frame size, and have an approximately same amount of magnet material, a same rated torque demand and a 400 - 420 rpm speed. An analysis of the computation results gives new information on the character of fractional slot machines.A fractional slot prototype machine with number 0.4 for the slots per pole and per phase, 45 kW output power and 420 rpm speed is constructed to verify the calculations. The measurement and the finite element method results are found to beequal.