18 resultados para allenes
Resumo:
The reaction mechanism of Pt(0)-catalyzed diboration reaction of allenes is investigated by the density functional method B3LYP. The overall reaction mechanism is examined. The electronic mechanisms of the allene insertion into the Pt-B bond are discussed in terms of the electron donation, back-donation, and d-pi interaction. During allene insertion into the Pt-B bond, the internal carbon atom of allene is preferred over the terminal one due to the stronger electron back-donation and stronger charge transfer in the former case than that in the latter one.
Resumo:
The reaction mechanism of Pd(O)-catalyzed allenes silastannation reaction is investigated by the density functional method B3LYP. The overall reaction mechanism is examined. For the allene insertion step, the Pd-Si bond is preferred over the Pd-Sn bond. The electronic mechanism of the allene insertion into Pd-Si bond to form sigma-vinylpalladium (terminal-insertion) and sigma-allylpalladium (internal-insertion) insertion products is discussed ill terms of the electron donation and back-donation. It is found that the electron back-donation is significant for both terminal- and internal-insertion. During allene insertion into Pd-Si bond, internal-insertion is preferred over terminal-insertion. By using methylallene, the regio-selectivity for the monosubstituted allene insertion into Pd-Si and Pd-Sn bond is analyzed.
Resumo:
The reaction mechanism of Pd(O)-catalyzed allene bis-selenation reactions is investigated by using density functional methods. The overall reaction mechanism has been examined. It is found that with the bulkier PMe3 ligand, the rate-determining step is the reductive elimination process, while allene insertion and reductive elimination processes are competitive for the rate-determining step with the PH3 ligand, indicating the importance of the ligand effect. For both cis and trans palladium complexes, allene insertion into the Pd-Se bond of the trans palladium complex using the internal carbon atom attached to the selenyl group is prefer-red among the four pathways of allene insertion processes. The formation of sigma-allyl and pi-allyl palladium complexes is favored over that of the sigma-vinyl palladium species. By using methylallene, the regioselectivity of monosubstituted allene insertion into the Pd-Se bond is analyzed.
Resumo:
A 1:1 mixture of (dppf)PtCl(2) and AgOTf (5 mol%) catalyzed the intermolecular hydroamination of monosubstituted allenes with secondary alkylamines at 80 degrees C to form allylic amines in good yield with selective formation of the E-diastereomer.
Resumo:
A wide range of palladium catalysed regio- and stereo-specific 5-, 6- and 7-exo-dig mono-, bis- and tris-cyclisation processes of aryl and vinyl halides and allylic acetates are described. The mono- and bis-cyclisation processes terminate in hydride capture from piperidine-formic acid or sodium formate. Addition of TI2CO3 results in alkyne-allene isomerisation and leads, after cyclisation, to 1,3-dienes which give Diels-Alder adducts in good yield. Copyright (C) 1996 Elsevier Science Ltd
Resumo:
Cuticular hydrocarbon components in beetles of six Australian melolonthines whose larvae damage sugarcane, Antitrogus parvulus (Britton), A. consanguineus (Blackburn), Lepidiota negatoria (Blackburn), L. picticollis (Lea), L. noxia (Britton) and Dermolepida alborhirtum (Arrow), are identified and compared. These species demonstrate species-specific cuticular hydrocarbon profiles with a number of unprecedented structures. Major components have been identified as polymethylated hydrocarbons, 3-methyl substituted n-alkanes, 9,10-allenes and the corresponding C9 alkenes. The similarity of these compounds shows some correlation with the phylogeny of the beetles, but two polymethylated C22 hydrocarbons are unique to A. parvulus. One C25 allene is shown to have a potential role in mate recognition in A. consanguineus.
Resumo:
Issue in Honor of Prof. Paweł Kafarski
Resumo:
The reactivity of permethylzirconocene and permethylhafnocene complexes with various nucleophiles has been investigated. Permethylzirconocene reacts with sterically hindered ketenes and allenes to afford metallacycle products. Reaction of these cummulenes with permethylzirconocene hydride complexes affords enolate and σ-allyl species, respectively. Reactions which afford enolate products are nonstereospecific, whereas reactions which afford allyl products initially give a cis-σ-allyl complex which rearranges to its trans isomer. The mechanism of these reactions is proposed to occur either by a Lewis Acid-Lewis Base interaction (ketenes) or by formation of a π-olefin intermediate (allenes).
Permethylzirconocene haloacyl complexes react with strong bases such as lithium diisopropylamide or methylene trimethylphosphorane to afford ketene compounds. Depending on the size of the alkyl ketene substituent, the hydrogenation of these compounds affords enolate-hydride products with varying degrees of stereoselectivity. The larger the substituent, the greater is the selectivity for cis hydrogenation products.
The reaction of permethylzirconocene dihydride and permethylhafnocene dihydride with methylene trimethylphosphorane affords methyl-hydride and dimethyl derivatives. Under appropriate conditions, the metallated-ylide complex 1, (η^5-C_5(CH_3)_5)_2 Zr(H)CH_2PMe_2CH_2, is also obtained and has been structurally characterized by X-ray diffraction techniques. Reaction of 1 with CO affords (η^5-C_5(CH_3)_5)_2 Zr(C,O-η^2 -(PMe_3)HC=CO)H which exists in solution as an equilibrium mixture of isomers. In one isomer (2), the η^2-acyl oxygen atom occupies a lateral equatorial coordination position about zirconium, whereas in the other isomer (3), the η-acyl oxygen atom occupies the central equatorial position. The equilibrium kinetics of the 2→3 isomerization have been studied and the structures of both complexes confirmed by X-ray diffraction methods. These studies suggest a mechanism for CO insertion into metal-carbon bonds of the early transition metals.
Permethylhafnocene dihydride and permethylzirconocene hydride complexes react with diazoalkanes to afford η^2-N, N' -hydrazonido species in which the terminal nitrogen atom of the diazoalkane molecule has inserted into a metal-hydride or metal-carbon bond. The structure of one of these compounds, Cp*_2Zr(NMeNCTol_2)OH, has been determined by X-ray diffraction techniques. Under appropriate conditions, the hydrazonido-hydride complexes react with a second equivalent of diazoalkene to afford η' -N-hydrazonido-η^2-N, N' -hydrazonido species.
Resumo:
Methodology for the preparation of allenes from propargylic hydrazine precursors under mild conditions is described. Oxidation of the propargylic hydrazines, which can be readily prepared from propargylic alcohols, with either of two azo oxidants, diethyl azodicarboxylate (DEAD) or 4-methyl 1,2-triazoline-3,5-dione (MTAD), effects conversion to the allenes, presumably via sigmatropic rearrangement of a monoalkyl diazene intermediate. This rearrangement is demonstrated to proceed with essentially complete stereospecificity. The application of this methodology to the preparation of other allenes, including two that are notable for their reactivity and thermal instability, is also described.
The structural and mechanistic study of a monoalkyl diazene intermediate in the oxidative transformation of propargylic hydrazines to allenes is described. The use of long-range heteronuclear NMR coupling constants for assigning monoalkyl diazene stereochemistry (E vs Z) is also discussed. Evidence is presented that all known monoalkyl diazenes are the E isomers, and the erroneous assignment of stereochemistry in the previous report of the preparation of (Z)-phenyldiazene is discussed.
The synthesis, characterization, and reactivity of 1,6-didehydro[10]annulene are described. This molecule has been recognized as an interesting synthetic target for over 40 years and represents the intersection of two sets of extensively studied molecules: nonbenzenoid aromatic compounds and molecules containing sterically compressed π-systems.The formation of 1,5-dehydronaphthalene from 1 ,6-didehydro[10]annulene is believed to be the prototype for cycloaromatizations that produce 1,4-dehydroaromatic species with the radical centers disposed anti about the newly formed single bond. The aromaticity of this annulene and the facility of its cycloaromatization are also analyzed.
Resumo:
[EN] The purpose of this review article is to illustrate synthetic aspects of functionalized phosphorus derivatives containing an oximo moiety at the beta-position. First section will be focused on the synthesis of phosphine oxides, phosphonates or phosphonium salts containing an oxime group. The synthesis of these derivatives comprises the carbon–phosphorus single bond construction by reaction of haloximes with phosphorus derivatives, nucleophilic addition of phosphorus reagents to carbonyl compounds, or nucleophilic addition of phosphorus reagents to nitro olefins. This section will also concentrate on the most practical routes for the synthesis of the target compounds, through carbon–nitrogen double bond formation, which are as follows: condensation processes of carbonyl compounds and hydroxylamine derivatives or addition of hydroxylamines to allenes or alkynes. The preparative use of beta-oximo phosphorus derivatives as synthetic intermediates will be discussed in a second section, comprising olefination reaction, oxidation of oximes to nitrile oxides by reaction at the C-N double bond of the oxime moiety, oxidation of these substrates to nitrosoalkenes, reduction to the corresponding hydroxylamines and some reactions at the hydroxyl group of the hydroxyimino moiety.
Resumo:
Zirconocene aldehyde and ketone complexes were synthesized in high yield by treatment of zirconocene acyl complexes with trimethylaluminum or diisobutylaluminum hydride. These complexes, which are activated by dialkylaluminum chloride ligands, inserted unsaturated substrates such as alkynes, allenes, ethylene, nitriles, ketenes, aldehydes, ketones, lactones, and acid chlorides with moderate to high conversion. Insertion of aldehyde substrates yielded zirconocene diolate complexes with up to 20:1 (anti:syn) diastereoselectivity. The zirconocene diolates were hydrolyzed to afford unsymmetrical 1,2-diols in 40-80% isolated yield. Unsymmetrical ketones gave similar insertion yields with little or no diastereoselectivity. A high yielding one-pot method was developed that coupled carbonyl substrates with zirconocene aldehyde complexes that were derived from olefins by hydrozirconation and carbonylation. The zirconocene aldehyde complexes also inserted carbon monoxide and gave acyloins in 50% yield after hydrolysis.
The insertion reaction of aryl epoxides with the trimethylphoshine adduct of titanocene methylidene was examined. The resulting oxytitanacyclopentanes were carbonylated and oxidatively cleaved with dioxygen to afford y-lactones in moderate yields. Due to the instability and difficult isolation of titanocene methylidene trimethylphoshine adducts, a one-pot method involving the addition of catalytic amounts of trimethylphosphine to β,β-dimethyltitanacyclobutane was developed. A series of disubstituted aryl epoxides were examined which gave mixtures of diastereomeric insertion products. Based on these results, as well as earlier Hammett studies and labeling experiments, a biradical transition state intermediate is proposed. The method is limited to aryl substituted epoxide substrates with aliphatic examples showing no insertion reactivity.
The third study involved the use of magnesium chloride supported titanium catalysts for the Lewis acid catalyzed silyl group transfer condensation of enol silanes with aldehydes. The reaction resulted in silylated aldol products with as many as 140 catalytic turnovers before catalyst inactivation. Low diastereoselectivities favoring the anti-isomer were consistent with an open transition state involving a titanium atom bound to the catalyst surface. The catalysts were also used for the aldol group transfer polymerization of t-butyldimethylsilyloxy-1-ethene resulting in polymers with molecular weights of 5000-31,000 and molar mass dispersities of 1.5-2.8. Attempts to polymerize methylmethacrylate using GTP proved unsuccessful with these catalysts.
Resumo:
Les cyclopropanes sont des motifs d’une grande importance puisqu’ils sont présents dans plusieurs molécules biologiquement actives en plus d’être de puissants intermédiaires dans la synthèse de molécules complexes. Au cours de cet ouvrage, nous avons développé une nouvelle méthode générale pour la synthèse d’ylures d’iodonium de malonates, soit d’importants précurseurs d’esters cyclopropane-1,1-dicarboxyliques. Ainsi, à l’aide de ces ylures, une méthode très efficace pour la synthèse d’esters cyclopropane-1,1-dicarboxyliques racémiques a été développée. Des travaux ont aussi été entrepris pour la synthèse énantiosélective de ces composés. Par ailleurs, les esters cyclopropane-1,1-dicarboxyliques ont été utilisés dans le développement de deux nouvelles méthodologies, soit dans une réaction de cycloaddition (3+3) avec des imines d’azométhines et dans la formation d’allènes par l’addition-1,7 de cuprates. Nous avons aussi poursuivi l’étude synthétique du cylindrocyclophane F impliquant l’utilisation de cyclopropanes pour le contrôle des centres chiraux. Ainsi l’addition-1,5 d’un cuprate sur un ester cyclopropane-1,1-dicarboxylique a été utilisée comme l’une des étapes clés de notre synthèse. L’autre centre chiral a pu être contrôlé par l’hydrogénolyse sélective d’un cyclopropylméthanol. Ces études ont, par ailleurs, mené au développement d’une nouvelle réaction d’arylcyclopropanation énantiosélective utilisant des carbénoïdes de zinc générés in situ à partir de réactifs diazoïques. Cette méthode permet d’accéder très efficacement aux cyclopropanes 1,2,3-substitués. De plus, nous avons développé la première réaction de Simmons-Smith catalytique en zinc menant à un produit énantioenrichi.
Resumo:
Le présent mémoire a pour sujet le développement d’une méthode rapide et efficace vers la production d’allènes hautement substitués à partir de dérivés cyclopropaniques électrophiles énantioenrichis. L’avancement de méthodes synthétiques intéressantes pour la production asymétrique de ces dérivés de cyclopropane-1,1-diesters sera également présenté. Dans un premier temps, les différentes méthodes de synthèses des cyclopropanes activés seront abordées, ainsi que leur utilisation dans la préparation de molécules plus complexes. Par la suite, les techniques précédentes de préparation asymétrique des allènes seront introduites, démontrant ainsi la difficulté de leur accessibilité. Le développement d’une méthode fiable pour la synthèse de cyclopropane-1,1-diesters utilisant les ylures d’iodonium sera présenté. Finalement, l’accessibilité à plusieurs types d’allènes hautement substitués par l’utilisation de cuprates sera détaillée. Dans une seconde partie, il sera davantage question de l’accessibilité des cyclopropane-1,1-diesters énantioenrichis. Ces derniers sont d’un intérêt particulier, car ils constituent le point de départ de notre méthodologie précédente. Le développement d’une méthode pouvant être utilisée à grande échelle et à faible coût a donc été explorée. Les deux derniers chapitres présenteront donc les tentatives de générer ces cyclopropanes activés par résolution cinétique ou encore par l’hydrogénation asymétrique des cyclopropènes correspondants.
Resumo:
Le présent mémoire est subdivisé en deux principaux sujets. Le premier porte sur le développement d’une hydrolyse de thiazolidines assistée par micro-ondes en vue d’obtenir des cystéines a-substituées. Le second est axé sur le développement d’une méthodologie pour la synthèse catalytique énantiosélective d’alkylidènecyclopropanes 1,1-di-accepteurs. Dans un premier temps, les rôles et les utilités des acides aminés quaternaires, plus spécifiquement des cystéines a-substituées, seront abordés, puis une revue des différentes méthodes énantiosélectives pour accéder à ces unités sera effectuée. Par la suite, le développement d’une méthode rapide et efficace d’hydrolyse sous irradiation aux micro-ondes de thiazolines sera présenté. Finalement, les études menant à l’application de cette méthode à la synthèse de cystéines -substituées sur grande échelle au moyen de réacteurs en écoulement dynamique et à haut criblage seront détaillées. Dans la seconde partie, les applications ainsi que les synthèses générales des alkylidènecyclopropanes en synthèse organique seront décrites. Plus particulièrement, les applications spécifiques des alkylidènecyclopropanes 1,1-di-accepteurs ainsi que leurs synthèses seront traitées de manière exhaustive. Par la suite, le développement d’une méthodologie énantiosélective catalytique pour la synthèse d’alkylidènecyclopropanes 1,1-di-accepteurs sera présenté. L’extension de cette méthodologie à la synthèse de dérivés cyclopropanes et cyclopropènes, ainsi que l’application de réactions stéréospécifiques pour les alkylidènecyclopropanes 1,1-di-accepteurs seront brièvement discutées.