Understanding the impact of divalent cation substitution on hydroxyapatite: An in vitro multiparametric study on biocompatibility

Hydroxyapatite (HA), a stable and biocompatible material for bone tissue therapy, may present a variable stoichiometry and accept a large number of cationic substitutions. Such substitutions may modify the chemical activity of HA surface, with possible impact on biocompatibility. In this work, we assessed the effects of calcium substitution with diverse divalent cations (Pb(2+), Sr(2+), Co(2+), Zn(2+), Fe(2+), Cu(2+), or Mg(2+)) on the biological behavior of HA. Physicochemical analyses revealed that apatite characteristics related to crystallinity and calcium dissolution/uptake rates are very sensitive to the nature of cationic substitution. Cytocompatibility was evaluated by mitochondrial activity, membrane integrity, cell density, proapoptotic potential, and adhesion tests. With the exception of Zn-HA, all the substituted HAs induced some level of apoptosis. The highest apoptosis levels were observed for Mg-HA and Co-HA. Cu-HA was the only material to impair simultaneously mitochondrial activity, membrane integrity, and cell density. The highest relative cell densities after exposure to the modified HAs were observed for Mg-HA and Zn-HA, while Co-HA significantly improved cell adhesion onto HA surface. These results show that changes on surface dissolution caused by cationic substitution, as well as the increase of metal species released to biological media, were the main responsible factors related to alterations on HA biocompatibility. (C) 2011 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 98A: 351-358, 2011.

Suotautuneen massakakun irtoamisominaisuudet

Tässä työssä tutkittiin suotautuneen massakakun adheesiota teräspinnalle. Muuttujina käytettiin tyypillisiä pesuprosessin arvoja. Lisäksi tutkittiin teollisessa pesulaitteessa massakakun irrotuksessa käytettävän paineilmapulssin käyttäytymistä. Kirjallisuusosassa tarkasteltiin suotautuneen massakakun muodostumista, adheesiota ja adheesioon vaikuttavia tekijöitä massakakun irrotuksen kannalta. Lisäksi massakakun irrotuksessa käytettävän paineilman virtaustatarkasteltiin adiabaattisena virtauksena. Kokeellisen osan irrotuskokeissa tutkittiin suotautuneen massakakun adheesiovoimia teräksisen kartion laitoihin ja reikälevyyn. Kokeissa tutkittiin tyypillisten prosessi-muuttujien kuten lämpötilan, pH:n ja kuiva-ainepitoisuuden vaikutusta tarvittavaan kakun irrotusvoimaan. Lisäksi tutkittiin myös kartion kulman ja pinnanlaadun vaikutusta. Adheesiokokeiden perusteella pystyttiin laskemaan massakakun irrotukseen tarvittava rajapaine teollisen pesulaitteen lokeron suodoskanavassa. Kokeellisen osan paineilmakokeissa tutkittiin irrotuksessa käytettävän paineilman painevaikutusta ja virtausta teollisen pesulaitteen lokerossa ja näihin vaikuttavia rakenteellisten ja prosessiteknisten parametrien vaikutusta. Lisäksi tutkimusta täydennettiin videokuvauksen avulla tutkimalla paineaallon etenemistä merkkiaineen avulla.

Probabilistic structure of an annual extreme rainfall series of a coastal area of the State of São Paulo, Brazil

This study aimed to describe the probabilistic structure of the annual series of extreme daily rainfall (Preabs), available from the weather station of Ubatuba, State of São Paulo, Brazil (1935-2009), by using the general distribution of extreme value (GEV). The autocorrelation function, the Mann-Kendall test, and the wavelet analysis were used in order to evaluate the presence of serial correlations, trends, and periodical components. Considering the results obtained using these three statistical methods, it was possible to assume the hypothesis that this temporal series is free from persistence, trends, and periodicals components. Based on quantitative and qualitative adhesion tests, it was found that the GEV may be used in order to quantify the probabilities of the Preabs data. The best results of GEV were obtained when the parameters of this function were estimated using the method of maximum likelihood. The method of L-moments has also shown satisfactory results.

Surface Roughness and Bacterial Adherence to Resin Composites and Ceramics

Purpose: The aim of this study was to evaluate the surface roughness and the in vitro adherence of Streptococcus mutans to indirect aesthetic restorative materials that are uncoated with saliva.Materials and Methods: Four groups of restorative materials were evaluated according to material type: (1) microparticulate feldspathic ceramic; (2) leucite-reinforced feldspathic ceramic; (3) microhybrid resin composite and (4) microfilled resin composite. Twenty standardised samples of each material were produced. Roughness analysis (Ra, n = 10) was performed using a roughness analyser. Adhesion tests (n = 10) were carried out in 24-well plates; colony-forming units (CFU/mL) were evaluated. The mean values of roughness (mu m) and adherence (CFU/mL) for each group were subjected to an analysis of variance and a Tukey test.Results: The leucite-reinforced feldspathic ceramic was rougher and presented higher bacterial adherence than the microparticulate feldspathic ceramic. The resin composites were similar with regard to surface roughness and bacterial adherence.Conclusions: The microhybrid and microfilled resin composites were similar and the leucite-reinforced feldspathic ceramic was rougher and presented higher bacterial adherence than the microparticulate feldspathic ceramic.

Microstructure and corrosion resistance of inorganic-organic (ZrO2-PMMA) hybrid coating on stainless steel

Zirconia-polymethylmetacrylate hybrids prepared by a sol-gel method were deposited by dip-coating on stainless steel to improve the resistance against wet corrosion. The effect of the concentration of polymethylmetacrylate and the number of coating applications on the microstructure and corrosion performance of coated samples was investigated. The microstructural properties of samples was analyzed by scanning electron and atomic force microscopy, adhesion tests and profilemeter measurements. The electrochemical corrosion was evaluated through potentiodynamic polarization curves at room temperature. Results show that the sample prepared with 17 vol.% of polymethylmethacrylate has a maximum corrosion resistance, smaller roughness, are hermetic and adherent to the substrate. This film increases the life time of the stainless steel by a factor 30. (C) 1999 Elsevier B.V. B.V. All rights reserved.

Adherence of Streptococcus mutans to uncoated and saliva-coated glass-ceramics and composites

This study sought to investigate the surface roughness and the adherence of Streptococcus mutans (in the presence and absence of saliva) to ceramics and composites. The early dental biofilms formed in situ on the materials were illustrated, using scanning electron microscopy (SEM). Feldspathic and leucite/feldspathic ceramics and microhybrid and microfilled composites were evaluated. Human dental enamel was used as the control. Standardized specimens of the materials were produced and surface roughness was analyzed. The adhesion tests were carried out in 24-well plates and colony forming units (CFU/mL) were evaluated. Values of roughness (μm) and adherence (CFU/mL) were analyzed statistically. Of all the surfaces tested, enamel was the roughest. Leucite/feldspathic ceramics were rougher than the feldspathic ceramic, while composites were similar statistically. Enamel offered the highest level of adherence to uncoated and saliva-coated specimens, while the leucite/feldspathic ceramic demonstrated greater adherence than the feldspathic ceramic and the composites were similar statically. The rougher restorative materials increased the adherence of S, mutans on the material surfaces.

Modificação da superfície do titânio e de sua liga Ti-6Al-4V por recobrimento com TiO2 e hidroxiapatita

In this work, the influence of modifications of the cp-Ti and Ti 6Al 4V alloy, by treating the surface with NaOH and depositing titanium oxide and hydroxyapatite by sol-gel method, on their biocompatibility was studied. The coatings were characterized by scanning electron microscopy and X-ray diffraction which showed that the coatings on Ti 6Al 4V are better than on cp-Ti. Adhesion tests showed that adhesion strength of the coatings on cp-Ti substrate is less than on Ti 6Al 4V as well as cytotoxicity for L929 fibroblast cells is higher

Adesão de Paracoccidioides brasiliensis e outros fungos anemófilos a teias de aranhas: implicações para a identificação de nichos microbianos no ambiente

The dimorphic pathogenic fungus, Paracoccidioides brasiliensis (Pb), is the etiological agent of paracoccidioidomycosis (PCM), the most important systemic mycosis in Latin America. While the yeast phase can be isolated from patients affected by paracoccidioidomycosis, dogs and naturally infected armadillos; several elements related to the ecology of the saprophytic phase of the pathogen, which is responsible for the production of infective propagules, are poorly understood, hampering the adoption of preventive measures. The demonstration of the high incidence of Pb infection in the 9- banded armadillo, Dasypus novemcinctus, has opened new perspectives for the identification of the pathogen’s habitat. At the opening of the armadillos’ burrows, spider webs are commonly found. The objective of this study was to evaluate the presence of Pb in spider webs samples related to the habitat of armadillos. Spider web samples were collected at Lageado Farm, Botucatu/SP and prepared for microscopic, molecular and mycological analyses. Microscopic analysis showed that different fungi were closely attached to spider web samples. Nested-PCR reaction showed positive amplification for Pb in 4 samples, with identity confirmed by amplicon sequencing. Fungal colonies also included members of Aspergillus, Blastobotrys, Penicillium, Candida, and Sporothrix genera, which are related to opportunistic disease and primary infections of great medical importance. In vitro adhesion tests of mycelia and yeast form of Pb to the spider webs were also performed, in order to analyze the possible physical attraction between fungal cells and the spider web protein network. The results showed a clear adherence of fungal particles to spider webs. In the current literature, there are no studies reporting adhesive properties of microorganisms to spider webs... (Complete abstract click electronic access below)

Abordagens estatísticas em testes de resistência de união entre dentina bovina, sistema adesivo e resina composta

Pós-graduação em Odontologia Restauradora - ICT

Modificação de superfície da liga Ti6A14V para apliacação biomédica

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Processing and mechanical properties evaluation of glass fiber-reinforced PTFE laminates

A specific manufacturing process to obtain continuous glass fiber-reinforced RIFE laminates was studied and some of their mechanical properties were evaluated. Young's modulus and maximum strength were measured by three-point bending test and tensile test using the Digital Image Correlation (DIC) technique. Adhesion tests, thermal analysis and microscopy were used to evaluate the fiber-matrix adhesion, which is very dependent on the sintering time. The composite material obtained had a Young's modulus of 14.2 GPa and ultimate strength of 165 MPa, which corresponds to approximately 24 times the modulus and six times the ultimate strength of pure RIFE. These results show that the RIFE composite, manufactured under specific conditions, has great potential to provide structural parts with a performance suitable for application in structural components. (C) 2012 Elsevier Ltd. All rights reserved.

Anwendung der konfokalen Laser-Scanning-Mikroskopie zur Charakterisierung der Struktur von Zähnen und von oberflächenmodifiziertem Titan für Knochenimplantate

Zusammenfassung Mittels Fluoreszenzfarbstoffen können Strukturen sichtbar gemacht werden, die auf kon-ventionellem Weg nicht, oder nur schwer darzustellen sind. Besonders in Kombination mit der Konfokalen Laser Scanning Mikroskopie eröffnen sich neue Wege zum spezifischen Nachweis unterschiedlichster Komponenten biologischer Proben und gegebenenfalls deren dreidimensionale Widergabe.Die Visualisierung des Proteinanteils des Zahnhartgewebes kann mit Hilfe chemisch kopplungsfähiger Fluorochrome durchgeführt werden. Um zu zeigen, daß es sich bei dieser Markierung nicht um unspezifische Adsorption des Farbstoffes handelt, wurde zur Kontrolle die Proteinkomponente der Zahnproben durch enzymatischen Verdau beseitigt. Derartig behandelte Präparate wiesen eine sehr geringe Anfärbbarkeit auf.Weiterführend diente diese enzymatische Methode als Negativkontrolle zum Nachweis der Odontoblastenfortsätze im Dentin bzw. im Bereich der Schmelz-Dentin-Grenze. Hiermit konnte differenziert werden zwischen reinen Reflexionsbildern der Dentinkanäle und den Zellausläufern deren Membranen gezielt durch lipophile Fluoreszenzfarbstoffe markiert wurden.In einem weiteren Ansatz konnte gezeigt werden, daß reduzierte und daher nichtfluoreszente Fluoresceinabkömmlinge geeignet sind, die Penetration von Oxidationsmitteln (hier H2O2) in den Zahn nachzuweisen. Durch Oxidation dieser Verbindungen werden fluoreszierende Produkte generiert, die den Nachweis lieferten, daß die als Zahnbleichmittel eingesetzten Mittel rasch durch Schmelz und Dentin bis in die Pulpahöhle gelangen können.Die Abhängigkeit der Fluoreszenz bestimmter Fluorochrome von deren chemischer Um-gebung, im vorliegenden Fall dem pH-Wert, sollte eingesetzt werden, um den Säuregrad im Zahninneren fluoreszenzmikroskopisch darzustellen. Hierbei wurde versucht, ein ratio-metrisches Verfahren zu entwickeln, mit dem die pH-Bestimmung unter Verwendung eines pH-abhängigen und eines pH-unabhängigen Fluorochroms erfolgt. Diese Methode konnte nicht für diese spezielle Anwendung verifiziert werden, da Neutralisationseffekte der mineralischen Zahnsubstanz (Hydroxylapatit) die pH-Verteilung innerhalb der Probe beeinflußen. Fluoreszenztechniken wurden ebenfalls ergänzend eingesetzt zur Charakterisierung von kovalent modifizierten Implantatoberflächen. Die, durch Silanisierung von Titantestkörpern mit Triethoxyaminopropylsilan eingeführten freien Aminogruppen konnten qualitativ durch den Einsatz eines aminspezifischen Farbstoffes identifiziert werden. Diese Art der Funktionalisierung dient dem Zweck, Implantatoberflächen durch chemische Kopplung adhäsionsvermittelnder Proteine bzw. Peptide dem Einheilungsprozeß von Implantaten in den Knochen zugänglicher zu machen, indem knochenbildende Zellen zu verbessertem Anwachsverhalten stimuliert werden. Die Zellzahlbestimmung im Adhäsionstest wurde ebenfalls mittels Fluoreszenzfarbstoffen durchgeführt und lieferte Ergebnisse, die belegen, daß die durchgeführte Modifizierung einen günstigen Einfluß auf die Zelladhäsion besitzt.

Synthese von Sialyl-Lewis-X-Mimetika durch stereoselektive ortho-C-Glycosylierung von Phenolen

Ziel der Arbeit war es, Sialyl-LewisX-Mimetika auf Basis ortho-C-glycosylierter Phenole als Inhibitoren für die Selektin-Ligand-Wechselwirkungen zu synthetisieren. Dazu wurde zunächst die Stereoselektivität der ortho-C-Mannosylierung untersucht. Dabei wurde gezeigt, dass bei der Umsetzung von Phenolen mit dem benzylgeschützten Mannosyl-trichloracetimidat in Gegenwart von TMSOTf selektiv das β-C-Mannosid erhalten wurde. Gleichzeitig konnte anhand der NMR-spektroskopischen Untersuchungen nachgewiesen werden, dass die in der Literatur beschriebenen α-C-Mannoside von Phenolen tatsächlich β-konfiguriert sind. Wenn Naphthole als Glycosylakzeptoren verwendet wurden, konnten durch Modifikation des Promotors auch die für die Synthese der Mimetika benötigten α-C-Mannoside erhalten werden, wobei ZnCl2 als Promotor die besten Ergebnisse lieferte. Allerdings zeigten die synthetisierten α-C-Mannoside und α-C-Galactoside eine Inversion des Pyranoseringes und lagen in der ungewöhnlichen 1C4-Konformation vor.rnAnschließend konnte auf diese Weise das durch Docking-Studien gefundene Mimetikum (2S)-3-Cyclohexyl-2-[7-hydroxy-8-(α-D-mannosyl)naphthalin-2-yloxy]propionsäure syntheti-siert werden. Es besaß jedoch in Zelladhäsionstests keine ausreichende Aktivität bei der Inhibierung der Selektin-Ligand-Wechselwirkung. Bei den ursprünglichen Dockingstudien war allerdings von der gewohnten 4C1-Konformation ausgegangen worden. Spätere NMR-Experimente und DFT-Berechnungen zeigten, dass das Mimetikum tatsächlich in der 1C4-Konformation vorlag und es deshalb nicht aktiv war. Die synthetisierten Stereo- und Regioisomere zeigten in Zelladhäsionstests ebenfalls keine Aktivität.rnVersuche, die α-1-C-Mannosylnaphthole zu den benötigten 1-C-2-O-Diglycosyl-naphthalinen umzusetzen waren nicht erfolgreich, da die phenolische OH-Gruppe sterisch zu sehr abgeschirmt war, um unter milden Reaktionsbedingungen glycosyliert zu werden, bzw. die α-1-C-Mannosylnaphthaline unter drastischeren Reaktionsbedingungen nicht stabil waren. Daher wurde 1-(2′,3′,4′,6′-Tetra-O-benzyl-β-D-galactopyranosyl)-2-naphthol mit 2,3,4,6-Tetra-O-acetyl-α-D-mannopyranosyl-trichloracetimidat in Gegenwart von TMSOTf zum ersten synthetischen 1-C-2-O-Diglycosyl-phenol umgesetzt. Nach Abspaltung der Schutzgruppen sollte das erhaltene 1-Galactosyl-2-O-mannosyl-naphthalin enzymatisch zum Sialyl-LewisX-Mimetikum verlängert werden. Es wurde vom Enzym jedoch nicht als Substrat erkannt. Versuche zur chemischen Anbindung des Säurebausteins stehen noch aus.rn

Compósitos de polímero-cerâmica para condensadores incorporados

A necessidade de produção de dispositivos eletrónicos mais eficientes e a sua miniaturização tem sido um dos principais desígnios da indústria eletrónica. Assim surgiu a necessidade de melhorar o desempenho das designadas placas de circuito impresso, tornando-as simultaneamente mais flexíveis, com menos ruído, mais estáveis face a variações bruscas de temperatura e que permitam operar numa vasta gama de frequências e potências. Para tal, uma das estratégias que tem vindo a ser estudada é a possibilidade de incorporar os componentes passivos, nomeadamente condensadores, sob a forma de filme diretamente no interior da placa. Por forma a manter uma elevada constante dielétrica e baixas perdas, mantendo a flexibilidade, associada ao polímero, têm sido desenvolvidos os designados compósitos de matriz polimérica. Nesta dissertação procedeu-se ao estudo do comportamento dielétrico e elétrico da mistura do cerâmico CaCu3Ti4O12 com o copolímero estireno-isoprenoestireno. Foram preparados filmes com diferentes concentrações de CCTO, recorrendo ao método de arrastamento, em conjunto com o Centro de Polímeros da Eslováquia. Foram também preparados filmes por spin-coating para as mesmas concentrações. Usaram-se dois métodos distintos para a preparação do pó de CCTO, reação de estado sólido e sol-gel. Foi realizada a caraterização estrutural (difração de raios-X. espetroscopia de Raman), morfológica (microscopia eletrónica de varrimento) e dielétrica aos filmes produzidos. Na caracterização dielétrica determinou-se o valor da constante dielétrica e das perdas para todos os filmes, à temperatura ambiente, bem como na gama de temperatura entre os 200 K e os 400 K, o que permitiu identificar existência de relaxações vítreas e subvítreas, e assim calcular as temperaturas de transição vítrea e energias de ativação, respetivamente. Foram realizados testes de adesão e aplicada a técnica de análise mecânica dinâmica para o cálculo das temperaturas de transição vítrea nos filmes preparados pelo método de arrastamento. Estudou-se ainda qual a lei de mistura que melhor se ajusta ao comportamento dielétrico do nosso compósito. Verificou-se que é a lei de Looyenga generalizada a que melhor se ajusta à resposta dielétrica dos compósitos produzidos.

A BACKING DEVICE BASED ON AN EMBEDDED STIFFENER AND RETRACTABLE INSERTION TOOL FOR THIN-FILM COCHLEAR ARRAYS

Intracochlear trauma from surgical insertion of bulky electrode arrays and inadequate pitch perception are areas of concern with current hand-assembled commercial cochlear implants. Parylene thin-film arrays with higher electrode densities and lower profiles are a potential solution, but lack rigidity and hence depend on manually fabricated permanently attached polyethylene terephthalate (PET) tubing based bulky backing devices. As a solution, we investigated a new backing device with two sub-systems. The first sub-system is a thin poly(lactic acid) (PLA) stiffener that will be embedded in the parylene array. The second sub-system is an attaching and detaching mechanism, utilizing a poly(N-vinylpyrrolidone)-block-poly(d,l-lactide) (PVP-b-PDLLA) copolymer-based biodegradable and water soluble adhesive, that will help to retract the PET insertion tool after implantation. As a proof-of-concept of sub-system one, a microfabrication process for patterning PLA stiffeners embedded in parylene has been developed. Conventional hotembossing, mechanical micromachining, and standard cleanroom processes were integrated for patterning fully released and discrete stiffeners coated with parylene. The released embedded stiffeners were thermoformed to demonstrate that imparting perimodiolar shapes to stiffener-embedded arrays will be possible. The developed process when integrated with the array fabrication process will allow fabrication of stiffener-embedded arrays in a single process. As a proof-of-concept of sub-system two, the feasibility of the attaching and detaching mechanism was demonstrated by adhering 1x and 1.5x scale PET tube-based insertion tools and PLA stiffeners embedded in parylene using the copolymer adhesive. The attached devices survived qualitative adhesion tests, thermoforming, and flexing. The viability of the detaching mechanism was tested by aging the assemblies in-vitro in phosphate buffer solution. The average detachment times, 2.6 minutes and 10 minutes for 1x and 1.5x scale devices respectively, were found to be clinically relevant with respect to the reported array insertion times during surgical implantation. Eventually, the stiffener-embedded arrays would not need to be permanently attached to current insertion tools which are left behind after implantation and congest the cochlear scala tympani chamber. Finally, a simulation-based approach for accelerated failure analysis of PLA stiffeners and characterization of PVP-b-PDLLA copolymer adhesive has been explored. The residual functional life of embedded PLA stiffeners exposed to body-fluid and thereby subjected to degradation and erosion has been estimated by simulating PLA stiffeners with different parylene coating failure types and different PLA types for a given parylene coating failure type. For characterizing the PVP-b-PDLLA copolymer adhesive, several formulations of the copolymer adhesive were simulated and compared based on the insertion tool detachment times that were predicted from the dissolution, degradation, and erosion behavior of the simulated adhesive formulations. Results indicate that the simulation-based approaches could be used to reduce the total number of time consuming and expensive in-vitro tests that must be conducted.