Influence of Different Base Thicknesses on Maxillary Complete Denture Processing: Linear and Angular Graphic Analysis on the Movement of Artificial Teeth

Objective: The purpose of this study was to compare the dental movement that occurs during the processing of maxillary complete dentures with 3 different base thicknesses, using 2 investment methods, and microwave polymerization.Methods: A sample of 42 denture models was randomly divided into 6 groups (n = 7), with base thicknesses of 1.25, 2.50, and 3.75 mm and gypsum or silicone flask investment. Points were demarcated on the distal surface of the second molars and on the back of the gypsum cast at the alveolar ridge level to allow linear and angular measurement using AutoCAD software. The data were subjected to analysis of variance with double factor, Tukey test and Fisher (post hoc).Results: Angular analysis of the varying methods and their interactions generated a statistical difference (P = 0.023) when the magnitudes of molar inclination were compared. Tooth movement was greater for thin-based prostheses, 1.25 mm (-0.234), versus thick 3.75 mm (0.2395), with antagonistic behavior. Prosthesis investment with silicone (0.053) showed greater vertical change compared with the gypsum investment (0.032). There was a difference between the point of analysis, demonstrating that the changes were not symmetric.Conclusions: All groups evaluated showed change in the position of artificial teeth after processing. The complete denture with a thin base (1.25 mm) and silicone investment showed the worst results, whereas intermediate thickness (2.50 mm) was demonstrated to be ideal for the denture base.

The Tyrolien lyre: a glee book, consisting of easy pieces arranged mostly for soprano, alto, tenor, and base [sic] voices, with and without piano-forte accompaniments; comprising a complete collection of solos, duetts, trios, quartetts, quintetts, choruses, &c. for the use of societies, schools, clubs, choirs, and the social circle,

Mode of access: Internet.

The complete nucleotide sequence of subterranean clover mottle virus

The complete nucleotide sequence of Subterranean clover mottle virus (SCMoV) genomic RNA has been determined. The SCMoV genome is 4,258 nucleotides in length. It shares most nucleotide and amino acid sequence identity with the genome of Lucerne transient streak virus (LTSV). SCMoV RNA encodes four overlapping open reading frames and has a genome organisation similar to that of Cocksfoot mottle virus (CfMV). ORF1 and ORF4 are predicted to encode single proteins. ORF2 is predicted to encode two proteins that are derived from a -1 translational frameshift between two overlapping reading frames (ORF2a and ORF2b). A search of amino acid databases did not find a significant match for ORF1 and the function of this protein remains unclear. ORF2a contains a motif typical of chymotrypsin-like serine proteases and ORF2b has motifs characteristically present in positive-stranded RNA-dependent RNA polymerases. ORF4 is likely to be expressed from a subgenomic RNA and encodes the viral coat protein. The ORF2a/ORF2b overlapping gene expression strategy used by SCMoV and CfMV is similar to that of the poleroviruses and differ from that of other published sobemoviruses. These results suggest that the sobemoviruses could now be divided into two distinct subgroups based on those that express the RNA-dependent RNA polymerase from a single, in-frame polyprotein, and those that express it via a -1 translational frameshifting mechanism.

The complete validated mitochondrial genome of the black marlin Istiompax indica (Cuvier, 1832)

Two complete mitochondrial genomes of the black marlin Istiompax indica were assembled from approximately 3.5 and 2.5 million reads produced by Ion Torrent next generation sequencing. The complete genomes were 16,531 bp and 16,532 bp in length consisting of 2 rRNA, 13 protein-coding genes, 22tRNA and 2 coding regions. They demonstrated a similar A + T base (52.6%) to other teleosts. Intraspecific sequence variation was 99.5% for three I. indica mitogenomes and 99.7% for X. gladius. A lower value (85%) was found for the I. platypterus mitogenomes from genbank and accredited to inadvertent inclusion of gene regions from a con-familial species in one record, highlighting the need for cautious downstream use of genbank data. © 2014 Informa UK Ltd.

Synthesis and stereochemical assignments of diastereomeric Ni(II) complexes of glycine Schiff base with (R)-2-(N-{2-[N-alkyl-N-(1-phenylethyl)-amino]acetyl}amino) benzophenone; a case of configurationally stable stereogenic nitrogen

A family of chiral ligands derived from alpha-phenylethylamine and 2-aminobenzophenone were prepared by alkylation of the nitrogen atom. Upon reaction with glycine and a Ni(II) salt, these ligands were transformed into diastereomeric complexes, as a result of the configurational stability of the stereogenic nitrogen atom. Different diastereomeric ratios were observed depending on the substituent R introduced in the starting ligand, and stereochemical assignments were based on X-ray analysis, along with NMR studies and optical rotation measurements.

Characterization of complete genome sequence of the spring viremia of carp virus isolated from common carp (Cyprinus carpio) in China

The complete genome of spring viraemia of carp virus (SVCV) strain A-1 isolated from cultured common carp (Cyprinus carpio) in China was sequenced and characterized. Reverse transcription-polymerase chain reaction (RT-PCR) derived clones were constructed and the DNA was sequenced. It showed that the entire genome of SVCV A-1 consists of 11,100 nucleotide base pairs, the predicted size of the viral RNA of rhabdoviruses. However, the additional insertions in bp 4633-4676 and bp 4684-4724 of SVCV A-1 were different from the other two published SVCV complete genomes. Five open reading frames (ORFs) of SVCV A-1 were identified and further confirmed by RT-PCR and DNA sequencing of their respective RT-PCR products. The 5 structural proteins encoded by the viral RNA were ordered 3'-N-P-M-G-L-5'. This is the first report of a complete genome sequence of SVCV isolated from cultured carp in China. Phylogenetic analysis indicates that SVCV A-1 is closely related to the members of the genus Vesiculovirus, family Rhabdoviridae.

Complete genome sequence of lymphocystis disease virus isolated from China

Lymphocystis diseases in fish throughout the world have been extensively described. Here we report the complete genome sequence of lymphocystis disease virus isolated in China (LCDV-C), an LCDV isolated from cultured flounder (Paralichthys olivaceus) with lymphocystis disease in China. The LCDV-C genome is 186,250 bp, with a base composition of 27.25% G+C. Computer-assisted analysis revealed 240 potential open reading frames (ORFs) and 176 nonoverlapping putative viral genes, which encode polypeptides ranging from 40 to 1,193 amino acids. The percent coding density is 67%, and the average length of each ORF is 702 bp. A search of the GenBank database using the 176 individual putative genes revealed 103 homologues to the corresponding ORFs of LCDV-1 and 73 potential genes that were not found in LCDV-1 and other iridoviruses. Among the 73 genes, there are 8 genes that contain conserved domains of cellular genes and 65 novel genes that do not show any significant homology with the sequences in public databases. Although a certain extent of similarity between putative gene products of LCDV-C and corresponding proteins of LCDV-1 was revealed, no colinearity was detected when their ORF arrangements and coding strategies were compared to each other, suggesting that a high degree of genetic rearrangements between them has occurred. And a large number of tandem and overlapping repeated sequences were observed in the LCDV-C genome. The deduced amino acid sequence of the major capsid protein (MCP) presents the highest identity to those of LCDV-1 and other iridoviruses among the LCDV-C gene products. Furthermore, a phylogenetic tree was constructed based on the multiple alignments of nine MCP amino acid sequences. Interestingly, LCDV-C and LCDV-1 were clustered together, but their amino acid identity is much less than that in other clusters. The unexpected levels of divergence between their genomes in size, gene organization, and gene product identity suggest that LCDV-C and LCDV-1 shouldn't belong to a same species and that LCDV-C should be considered a species different from LCDV-1.

Mechanism Responsible for the Complete Suppression of Karman Vortex in Flows Past a Wavy Square-Section Cylinder

The Karman vortex shedding is totally suppressed in flows past a wavy square-section cylinder at a Reynolds number of 100 and the wave steepness of 0.025. Such a phenomenon is illuminated by the numerical simulations. In the present study, the mechanism responsible for it is mainly attributed to the vertical vorticity. The geometric disturbance on the rear surface leads to the appearance of spanwise flow near the base. The specific vertical vorticity is generated on the rear surface and convecting into the near wake. The wake flow is recirculated with the appearance of the pair of recirculating cells. The interaction between the upper and lower shear layers is weakened by such cells, so that the vortex rolls could not be formed and the near wake flow becomes stable.

A nine-base nucleotide sequence in the porcine circovirus type 2 (PCV2) nucleocapsid gene determines viral replication and virulence

Porcine circovirus type 2 (PCV2) was retrospectively identified by serology in swine populations as an asymptomatic infection at least 25 years prior to the first reported case of PCV2-associated postweaning multisystemit wasting syndrome (PMWS). To investigate the sudden emergence of PMWS, viral sequences were amplified from frozen archived (1970-1971) porcine tissues and the complete genome of archival PCV2 was determined. The ORF1 gene product (viral DNA replicase) was homologous to contemporary PCV2 ORF1. In ORF2 (viral nucleocapsid gene) archival PCV2, a consistent linear nine-base sequence difference at base positions 1331 through 1339 was observed.The deduced amino acid sequence from these base changes alters the nucleocapsid conformation within the second immunogenic epitope from a hydrophobic (contemporary PCV2) to a hydrophilic (archival PCV2) configuration.

Do grafema ao gesto : contributos linguísticos para um sistema de síntese de base articulatória

Motivados pelo propósito central de contribuir para a construção, a longo prazo, de um sistema completo de conversão de texto para fala, baseado em síntese articulatória, desenvolvemos um modelo linguístico para o português europeu (PE), com base no sistema TADA (TAsk Dynamic Application), que visou a obtenção automática da trajectória dos articuladores a partir do texto de entrada. A concretização deste objectivo ditou o desenvolvimento de um conjunto de tarefas, nomeadamente 1) a implementação e avaliação de dois sistemas de silabificação automática e de transcrição fonética, tendo em vista a transformação do texto de entrada num formato adequado ao TADA; 2) a criação de um dicionário gestual para os sons do PE, de modo a que cada fone obtido à saída do conversor grafema-fone pudesse ter correspondência com um conjunto de gestos articulatórios adaptados para o PE; 3) a análise do fenómeno da nasalidade à luz dos princípios dinâmicos da Fonologia Articulatória (FA), com base num estudo articulatório e perceptivo. Os dois algoritmos de silabificação automática implementados e testados fizeram apelo a conhecimentos de natureza fonológica sobre a estrutura da sílaba, sendo o primeiro baseado em transdutores de estados finitos e o segundo uma implementação fiel das propostas de Mateus & d'Andrade (2000). O desempenho destes algoritmos – sobretudo do segundo – mostrou-se similar ao de outros sistemas com as mesmas potencialidades. Quanto à conversão grafema-fone, seguimos uma metodologia baseada em regras de reescrita combinada com uma técnica de aprendizagem automática. Os resultados da avaliação deste sistema motivaram a exploração posterior de outros métodos automáticos, procurando também avaliar o impacto da integração de informação silábica nos sistemas. A descrição dinâmica dos sons do PE, ancorada nos princípios teóricos e metodológicos da FA, baseou-se essencialmente na análise de dados de ressonância magnética, a partir dos quais foram realizadas todas as medições, com vista à obtenção de parâmetros articulatórios quantitativos. Foi tentada uma primeira validação das várias configurações gestuais propostas, através de um pequeno teste perceptual, que permitiu identificar os principais problemas subjacentes à proposta gestual. Este trabalho propiciou, pela primeira vez para o PE, o desenvolvimento de um primeiro sistema de conversão de texto para fala, de base articulatória. A descrição dinâmica das vogais nasais contou, quer com os dados de ressonância magnética, para caracterização dos gestos orais, quer com os dados obtidos através de articulografia electromagnética (EMA), para estudo da dinâmica do velo e da sua relação com os restantes articuladores. Para além disso, foi efectuado um teste perceptivo, usando o TADA e o SAPWindows, para avaliar a sensibilidade dos ouvintes portugueses às variações na altura do velo e alterações na coordenação intergestual. Este estudo serviu de base a uma interpretação abstracta (em termos gestuais) das vogais nasais do PE e permitiu também esclarecer aspectos cruciais relacionados com a sua produção e percepção.

Metodologia de selecção de materiais em design: base de dados nacional

Desde a Pré-História que a escolha de materiais esteve relacionada com a Arte. Mais tarde, durante a Idade Moderna vai ganhando uma importância cada vez maior. Atingida que foi a Idade Contemporânea, nomeadamente após a Revolução Industrial e durante a Segunda Guerra Mundial, devido ao aumento do número de materiais disponíveis, é que se pode falar de uma verdadeira seleção de materiais. É também após a Revolução Industrial que se clarificam as relações entre a evolução dos materiais e os movimentos e correntes das Artes Plásticas. Neste contexto, estudaram-se as interligações entre o processo de design e as metodologias de seleção, assim como as diversas tipologias de ferramentas existentes para esse efeito. Deste estudo, consideradas as respetivas vantagens e limitações, foi possível identificar bases de dados essencialmente técnicas, ou ao invés, ferramentas para inspiração com muitas imagens e pouca informação sobre as propriedades dos materiais. Para completar este levantamento crítico sobre processos e ferramentas de seleção, inquiriram-se cinquenta e três profissionais que trabalhavam em diferentes gabinetes de design portugueses. As perguntas dirigidas aos designers portugueses versaram sobre problemas relacionados com a escolha de materiais, abrangendo o tipo de matériasprimas empregues, processos utilizados e a qualidade da informação obtida. Na sequência deste estudo, verificou-se a existência de diversas lacunas relativamente aos meios disponíveis, rotinas de seleção, qualidade da informação existente e metodologias utilizadas. Foi neste contexto que se iniciou o projeto de criação de uma nova metodologia suportada por uma ferramenta digital. Os principais aspetos inovadores são: uma melhor interligação entre a metodologia de design e o processo de seleção de materiais e a sua sincronização; a informação necessária em cada etapa e o destaque dos fatores catalisadores da seleção de materiais. Outro elemento inovador foi a conjugação de três formas deferentes de seleção de materiais numa só ferramenta (a geral, a visual e a específica) e a hipótese de aceder a diferentes graus de informação. A metodologia, no contexto dos recursos disponíveis, foi materializada sob a forma de ferramenta digital (ptmaterials.com). O protótipo foi aferido com testes de usabilidade de cariz heurístico, com a participação de dezanove utilizadores. Foram detetadas diversas falhas de interação que condicionaram a liberdade e o controlo da navegação no seio da interface. Os utilizadores também mencionaram a existência de lacunas na prevenção de erros e a ligação do sistema à lógica habitual de outras aplicações já existentes. No entanto, também constituiu um estímulo a circunstância da maioria dos designers avaliarem o sistema como eficaz, eficiente, satisfatório e confirmarem o interesse da existência dos três tipos de seleção. Posteriormente, ao analisar os restantes resultados dos testes de usabilidade, também foram evidenciadas as vantagens dos diferentes tipos de informação disponibilizada e a utilidade de uma ferramenta desta natureza para a Indústria e Economia Nacionais. Esta ferramenta é apenas um ponto de partida, existindo espaço para melhorar a proposta, apesar da concretização de uma ferramenta digital ser um trabalho de grande complexidade. Não obstante se tratar de um protótipo, esta ferramenta está adequada aos dias de hoje e é passível de evoluir no futuro, tendo também a possibilidade de vir a ser preferencialmente utilizada por outros países de língua portuguesa.

Complete hypogonadotropic hypogonadism associated with a novel inactivating mutation of the gonadotropin-releasing hormone receptor.

In this study, we describe a patient with a phenotype of complete hypogonadotropic hypogonadism who presented primary failure of pulsatile GnRH therapy, but responded to exogenous gonadotropin administration. This patient bore a novel point mutation (T for A) at codon 168 of the gene encoding the GnRH receptor (GnRH-R), resulting in a serine to arginine change in the fourth transmembrane domain of the receptor. This novel mutation was present in the homozygous state in the patient, whereas it was in the heterozygous state in both phenotypically normal parents. When introduced into the complementary DNA coding for the GnRH-R, this mutation resulted in the complete loss of the receptor-mediated signaling response to GnRH. In conclusion, we report the first mutation of the GnRH-R gene that can induce a total loss of function of this receptor and is associated with a phenotype of complete hypogonadotropic hypogonadism.

Identification d’une architecture à base de composants dans une application orientée objets à l’aide d’une analyse dynamique

Un système, décrit avec un grand nombre d'éléments fortement interdépendants, est complexe, difficile à comprendre et à maintenir. Ainsi, une application orientée objet est souvent complexe, car elle contient des centaines de classes avec de nombreuses dépendances plus ou moins explicites. Une même application, utilisant le paradigme composant, contiendrait un plus petit nombre d'éléments, faiblement couplés entre eux et avec des interdépendances clairement définies. Ceci est dû au fait que le paradigme composant fournit une bonne représentation de haut niveau des systèmes complexes. Ainsi, ce paradigme peut être utilisé comme "espace de projection" des systèmes orientés objets. Une telle projection peut faciliter l'étape de compréhension d'un système, un pré-requis nécessaire avant toute activité de maintenance et/ou d'évolution. De plus, il est possible d'utiliser cette représentation, comme un modèle pour effectuer une restructuration complète d'une application orientée objets opérationnelle vers une application équivalente à base de composants tout aussi opérationnelle. Ainsi, La nouvelle application bénéficiant ainsi, de toutes les bonnes propriétés associées au paradigme composants. L'objectif de ma thèse est de proposer une méthode semi-automatique pour identifier une architecture à base de composants dans une application orientée objets. Cette architecture doit, non seulement aider à la compréhension de l'application originale, mais aussi simplifier la projection de cette dernière dans un modèle concret de composant. L'identification d'une architecture à base de composants est réalisée en trois grandes étapes: i) obtention des données nécessaires au processus d'identification. Elles correspondent aux dépendances entre les classes et sont obtenues avec une analyse dynamique de l'application cible. ii) identification des composants. Trois méthodes ont été explorées. La première utilise un treillis de Galois, la seconde deux méta-heuristiques et la dernière une méta-heuristique multi-objective. iii) identification de l'architecture à base de composants de l'application cible. Cela est fait en identifiant les interfaces requises et fournis pour chaque composant. Afin de valider ce processus d'identification, ainsi que les différents choix faits durant son développement, j'ai réalisé différentes études de cas. Enfin, je montre la faisabilité de la projection de l'architecture à base de composants identifiée vers un modèle concret de composants.

Étude sur l'utilisation de liquides ioniques à base imidazolium pour l'extraction sélective de phosphopeptides

La phosphorylation des protéines constitue l’une des plus importantes modifications post-traductionnelles (PTMs) et intervient dans de multiples processus physiologiques tels, la croissance, la différenciation cellulaire, l’apoptose, etc. En dépit de son importance, l’analyse des phosphoprotéines demeure une tâche difficile en raison de leur nature dynamique (car la phosphorylation des protéines est un processus réversible) et de leur faible abondance relative. En effet, la détermination des sites de phosphorylation est souvent difficile car les phosphopeptides sont souvent difficiles à détecter par des méthodes d’analyse chromatographique classique et par spectrométrie de masse (MS). De récentes études ont démontré que les nombreuses méthodes d’enrichissement de phosphopeptides existantes ne sont pas complètes, et que le nombre total de phosphopeptides détectés ne chevauchent pas complètement ces méthodes. C’est pour cela qu’il existe une nécessité de combler les lacunes des méthodes d’enrichissement existantes afin d’avoir des analyses phosphoprotéomiques plus complètes. Dans cette étude, nous avons utilisé les liquides ioniques (LI), plus particulièrement les sels d’imidazolium, comme une technique d’enrichissement alternative, dans le but de favoriser une extraction sélective de phosphopeptides présents en solution. Les sels d’imidazolium ont donc été utilisés en raison de leurs propriétés physico-chimiques "facilement" ajustables selon la nature des substituants sur le noyau imidazolium et la nature de l’anion. Les sels de monoimidazolium et de bis-imidazolium possédant respectivement des chaînes linéaires à 4, 12 et 16 atomes de carbone et ayant différents anions ont été synthétisés et utilisés pour effectuer des extractions liquide-liquide et solide-liquide des phosphopeptides en solution. Dans un premier temps, des extractions liquide-liquide ont été réalisées en utilisant un liquide ionique (LI) ayant une chaine linéaire de 4 atomes de carbone. Ces extractions réalisées avec le bis(trifluoromethanesulfonyl) amide de 3-butyl-1-methylimidazolium (BMIM-NTf2) et l’hexafluorophosphate de 3-butyl-1-methylimidazolium (BMIM-PF6) n’ont pas montré une extraction notable du PPS comparativement au PN. Dans un deuxième temps, des extractions solide-liquide ont été réalisées en fonctionnalisant des particules solides avec des sels d’imidazolium possédant des chaines linéaires de 12 ou 16 atomes de carbone. Ces extractions ont été faites en utilisant un phosphopentapeptide Ac-Ile-pTyr-Gly-Glu-Phe-NH2 (PPS) en présence de 2 analogues acides non-phosphorylés. Il a été démontré que les sels d’imidazolium à chaine C12 étaient meilleurs pour extraire le PPS que les deux autres peptides PN (Ac-Ile-Tyr-Gly-Glu-Phe-NH2) et PE (Ac-Glu-Tyr-Gly-Glu-Phe-NH2) L’électrophorèse capillaire (CE) et la chromatographie liquide à haute performance couplée à la spectrométrie de masse (LC-MS) ont été utilisées pour quantifier le mélange des trois peptides avant et après extraction ; dans le but de mesurer la sélectivité et l’efficacité d’extraction de ces peptides par rapport à la composition chimique du liquide ionique utilisé.