Saude coletiva e aptdão fisica de escolares de segundo grau : estudo a partis do Colegio Tecnico Industrial - UNESP, Bauru

Universidade Estadual de Campinas . Faculdade de Educação Física

Al Berto : Pelas imagens que o espelho te devolve

Dissertação de Mestrado apresentada ao ISPA - Instituto Universitário

Thin Maintenance Surfaces - Phase II, TR-435, 2003

In recent years there has been renewed interest in using preventive maintenance techniques to extend pavement life and to ensure low life cycle costs for our road infrastructure network. Thin maintenance surfaces can be an important part of a preventive maintenance program for asphalt cement concrete roads. The Iowa Highway Research Board has sponsored Phase Two of this research project to demonstrate the use of thin maintenance surfaces in Iowa and to develop guidelines for thin maintenance surface uses that are specific to Iowa. This report documents the results of test section construction and monitoring started in Phase One and continued in Phase Two. The report provides a recommended seal coat design process based on the McLeod method and guidance on seal coat aggregates and binders. An update on the use of local aggregates for micro-surfacing in Iowa is included. Winter maintenance guidelines for thin maintenance surfaces are reported herein. Finally, Phase One's interim, qualitative thin maintenance surface guidelines are supplemented with Phase two's revised, quantitative guidelines. When thin maintenance surfaces are properly selected and applied, they can improve the pavement surface condition index and the skid resistance of pavements. For success to occur, several requirements must be met, including proper material selection, design, application rate, workmanship, and material compatibility, as well as favorable weather during application and curing. Specific guidance and recommendations for many types of thin maintenance surfaces and conditions are included in the report.

Origins of production errors and significance of employee empowerment in reducing production error amount in sheet metal fabricating industry

The market place of the twenty-first century will demand that manufacturing assumes a crucial role in a new competitive field. Two potential resources in the area of manufacturing are advanced manufacturing technology (AMT) and empowered employees. Surveys in Finland have shown the need to invest in the new AMT in the Finnish sheet metal industry in the 1990's. In this run the focus has been on hard technology and less attention is paid to the utilization of human resources. In manymanufacturing companies an appreciable portion of the profit within reach is wasted due to poor quality of planning and workmanship. The production flow production error distribution of the sheet metal part based constructions is inspectedin this thesis. The objective of the thesis is to analyze the origins of production errors in the production flow of sheet metal based constructions. Also the employee empowerment is investigated in theory and the meaning of the employee empowerment in reducing the overall production error amount is discussed in this thesis. This study is most relevant to the sheet metal part fabricating industrywhich produces sheet metal part based constructions for electronics and telecommunication industry. This study concentrates on the manufacturing function of a company and is based on a field study carried out in five Finnish case factories. In each studied case factory the most delicate work phases for production errors were detected. It can be assumed that most of the production errors are caused in manually operated work phases and in mass production work phases. However, no common theme in collected production error data for production error distribution in the production flow can be found. Most important finding was still that most of the production errors in each case factory studied belong to the 'human activity based errors-category'. This result indicates that most of the problemsin the production flow are related to employees or work organization. Development activities must therefore be focused to the development of employee skills orto the development of work organization. Employee empowerment gives the right tools and methods to achieve this.

Chancen und Risiken der Arbeit im E-Business

E-Business, verstanden als ganzheitliche Strategie zur Reorganisation von Geschäftsprozessen, Strukturen und Beziehungen in Unternehmen, bietet für die Arbeitsgestaltung in einer digital vernetzten Welt Chancen und Risiken in Hinblick auf die Humankriterien. Empirische Untersuchungen in 14 Unternehmen zeigen „good practice“-Ansätze im B2B-Feld (Business-to-Business). Untersucht wurden die Tätigkeiten der elektronisch vernetzten Auftragsbearbeitung, des Web-, Content-Managements, der digitalen Druckvorlagenherstellung sowie der CAD- Bauplanzeichnung. Die beobachteten Arbeitsplätze zeigen, dass Arbeitsinhalte eher ganzheitlich und komplex gestaltet sind. Planende, ausführende, kontrollierende und organisierende Anteile weisen auf eine vielfältige Aufgabengestaltung hin, die hohe Anforderungen beinhaltet. Während alle beobachteten Tätigkeiten mit Aufnahme-, Erarbeitungs-, Verarbeitungs-, Übertragungs- und Weitergabeprozessen von Informationen zu tun haben, gibt es Differenzen in Bezug auf den Arbeitsumfang, den Zeitdruck, Fristsetzungen, erwartete Arbeitsleistungen sowie die Planbarkeit der Aufgaben. Die vorgefundenen Aufgabentypen (wenig bis sehr anforderungsreich im Sinne von Denk- und Planungsanforderungen) sind gekennzeichnet durch eine unterschiedlich ausgeprägte Aufgabenkomplexität. Interessant ist, dass, je anforderungsreicher die Aufgabengestaltung, je höher die Aufgabenkomplexität, je größer die Wissensintensität und je niedriger die Planbarkeit ist, desto größer sind die Freiräume in der Aufgabenausführung. Das heißt wiederum, dass bei zunehmenden E-Business-Anteilen mehr Gestaltungsspielräume zur Verfügung stehen. Die bestehenden Chancen auf eine humane Aufgabengestaltung sind umso größer, je höher die E-Business-Anteile in der Arbeit sind. Diese Wirkung findet sich auch bei einem Vergleich der Aufgabenbestandteile wieder. Die negativen Seiten des E-Business zeigen sich in den vorgefundenen Belastungen, die auf die Beschäftigten einwirken. Diskutiert wird die Verschiebung von körperlichen hin zu psychischen und vorrangig informatorischen Belastungen. Letztere stellen ein neues Belastungsfeld dar. Ressourcen, auf welche die Mitarbeiter zurückgreifen können, sind an allen Arbeitsplätzen vorhanden, allerdings unterschiedlich stark ausgeprägt. Personale, organisationale, soziale, aufgabenbezogene und informatorische Ressourcen, die den Beschäftigten zur Verfügung stehen, werden angesprochen. In Bezug auf die Organisationsgestaltung sind positive Ansätze in den untersuchten E-Business-Unternehmen zu beobachten. Der Großteil der untersuchten Betriebe hat neue Arbeitsorganisationskonzepte realisiert, wie die vorgefundenen kooperativen Organisationselemente zeigen. Die kooperativen Organisationsformen gehen allerdings nicht mit einer belastungsärmeren Gestaltung einher. Das vorgefundene breite Spektrum, von hierarchisch organisierten Strukturen bis hin zu prozess- und mitarbeiterorientierten Organisationsstrukturen, zeigt, dass Organisationsmodelle im E-Business gestaltbar sind. Neuen Anforderungen kann insofern gestaltend begegnet und somit die Gesundheit und das Wohlbefinden der Mitarbeiter positiv beeinflusst werden. Insgesamt betrachtet, zeigt E-Business ein ambivalentes Gesicht, das auf der Basis des MTO-Modells (Mensch-Technik-Organisation) von Uhlich (1994) diskutiert wird, indem vernetzte Arbeitsprozesse auf personeller, technischer sowie organisationaler Ebene betrachtet werden. E-business, seen as more than only the transformation of usual business processes into digital ones, furthermore as an instrument of reorganisation of processes and organisation structures within companies, offers chances for a human oriented work organisation. Empirical data of 14 case studies provide good practice approaches in the field of B2B (Business-to-Business). The observed work contents show, that tasks (e.g. order processing, web-, contentmanagement, first print manufacturing and architectural drawing) are well arranged. Executive, organising, controlling and coordinating parts constitute a diversified work content, which can be organised with high demands. Interesting is the result, that the more e-business-parts are within the work contents, on the one hand the higher are the demands of the type of work and on the other hand the larger is the influence on workmanship. The observed enterprises have realised new elements of work organisation, e.g. flexible working time, cooperative leadership or team work. The direct participation of the employees can be strengthened, in particular within the transformation process. Those companies in which the employees were early and well informed about the changes coming up with e-business work, the acceptance for new technique and new processes is higher than in companies which did not involve the person concerned. Structured in an ergonomic way, there were found bad patterns of behaviour concerning ergonomic aspects, because of missing knowledge regarding work-related ergonomic expertise by the employees. E-business indicates new aspects concerning requirements – new in the field of informational demands, as a result of poorly conceived technical balance in the researched SME. Broken systems cause interruptions, which increase the pressure of time all the more. Because of the inadequate usability of software-systems there appear in addition to the informational strains also elements of psychological stress. All in all, work contents and work conditions can be shaped and as a result the health and well-being of e-business-employees can be influenced: Tasks can be structured and organised in a healthfulness way, physiological strain and psychological stress are capable of being influenced, resources are existent and developable, a human work design within e-business structures is possible. The ambivalent face of e-business work is discussed on the basis of the MTO- (Mensch-Technik-Organisation) model (Ulich 1994). Thereby new and interesting results of researches are found out, concerning the personal/human side, the technical side and the organisational side of e-business work.

Logística externa de materiais : dificuldades em obras de construção em Angola

The objectives of this article are to analyze the role of external logistics in the construction sites in Angola and to evaluate the problems inherent in this activity in this country so we can find ways of increasing the rationalization of the production and, as a consequence of that, the competitiveness of Portuguese contractors operating in Angola. In spite of logistics being an administrative process that is incorporated, mainly, in the seriated industrial companies, it must also be applied to the construction industry because it presents unquestionable and vital benefits to its performance. Nevertheless, the evolution of logistics applied to the construction has been poor, which is proved by the limited bibliography in this area. This happens for two reasons: the intrinsic specificities of this industry and the consequent inapplicability of algorithms to rationalize production. Although it’s not viable to approach the logistics of construction through numeric models, it’s not unreasonable to study logistics applied to this area. Despite the fact that an approach to the construction logistics by numeric modeling is not viable, studying this theme continues to be meaningful. In most of the industries and especially in the construction one, the supply of resources (materials, equipments, workmanship or subcontractors) is an essential factor for the success of a business. The optimization of management of the supply chain for the construction industry constitutes one of the ways of optimizing a company and, especially, of increasing the profitability of its operations. Only through an improved logistic efficiency is it possible to take competitive advantage in the current market and, particularly, in the international market. In order for that to happen it is necessary to start making businessmen aware of the specific logistic difficulties in this industry and of ways to solve them either by disclosing them or by making businessmen reflect about them.

Standardization of procurement: National or international?

The ISO has issued a Draft International Standard on construction procurement and the British Standards Institute is drafting a standard based upon this for use in the UK. Three questions arise from these observations. First, what kind of consultation processes would be adequate to ensure that such a standard meets the requirements of an industry as diverse as construction? Second, why would an international standard be inappropriate for use in a country like UK? Third, what sort of issues should such a standard seek to cover? There are strong precedents for process standards, such as quality assurance, design management and workmanship on building sites. So the idea of a standard on procurement is not unusual. Moreover, there are many differences in tendering and procurement practice that are wasteful and even collusive or illegal. These issues are explored with a view to offering insights and suggestions for guidance based on the experiences in UK. The research method is first-hand observation of the drafting committee who are dealing with the British Standard. As an example to test and inform the standardization concept, six different standard guidance documents on tendering procedures are compared. This reveals a significant degree of diversity, and based on this, nine stages for implementing a tendering procedure are derived.

Por uma teorização das organizações de produção artesanal: habilidades produtivas nos caminhos singulares do Rio de Janeiro

The purpose of this thesis is to support the argument that workmanship production centers don¿t represent just survival strategy of social groups marginal to economical structure. Workmanship organizations are productive schemes that survived, in a parallel way, to the industrialization process, although they don¿t have been considered by the organization theory. The knowledge reserve in administration, from the traditional approach to critical studies, increased concerns on industrial organizations and business arrangements. Nevertheless, it is possible to find in Teoria da Delimitação dos Sistemas Sociais, from Guerreiro Ramos, elements to comprehend workmanship organizations as: technology, scale and sustainability, cognition, space and relationship and time. The research methodology used was bibliographic, field and documental, regarding action-research. It comes to the conclusion that, at present time, to keep it as distinct productive schemes, workmanship organizations must be associated to tourism and culture. The production must be thematic, with territorial identity, creative and sustainable, by the management of local raw material.

Cidadania em transporte coletivo: o papel fiscalizatório da gerenciadora do sistema de transporte coletivo intermunicipal Urbano de Passageiros da Região Metropolitana da Grande Vitória

A structure transports system is very necessary to attending many reasons of urban dislocations. This structuration is composed by many complex elements, as such as refer to: physical elements (rodoviary network, vehicles, garages, transboarding terminals), human elements (operational and administrative workmanship) and the institutional elements (management and fiscalization). This last one, especially, is our approach in this study, focusing the functions as the fiscalization of public organization. The purpose of this study was identifies how the public organization develops the management the system of public transport for urban intercity users and how can contributes for users satisfaction, feeding back avaluations, even, giving new direction or reavaluation of the fiscalization function. The methodology sdopted to get expected solutions is exploratory survey, due the unidentified any studies with the same focus or approaching to the citizens expectatives solutions by public organism manager point of view. Also it was realized an explanation survey to complement the study giving wide comprehension for the other elements used by organization to obtain success in the relationship with users. A field survey and bibliographical was realized thru documental investigation to get informations about necessary foundamentation based conclusion.

Alavancagem como instrumento de estratégia operacional: o caso da obra de construção da nova sede da Assembléia Legislativa do Estado do Maranhão

Devido à grande competitividade do mercado atual, estão em vantagem competitiva aquelas empresas que conhecem profundamente seus resultados financeiros, para que a partir deste conhecimento seus gestores possam tomar decisões visando a maximização do lucro. Dentro deste pensamento, esta pesquisa trata da alavancagem como instrumento de estratégia operacional, para isso apresenta o estudo de caso de uma obra de construção civil, setor este cuja mão-de-obra é um significante insumo, cujos funcionários de produção trabalham horas extras, aumentando o lucro da empresa. O objetivo do presente trabalho é demonstrar como a alavancagem operacional pode ser utilizada como instrumento de estratégia operacional neste contexto. Quanto aos fins se trata de uma pesquisa descritiva e aplicada; quanto aos meios é bibliográfica, documental e de campo. Foi realizada na obra de construção da nova sede da Assembléia Legislativa do Estado do Maranhão que está sendo executada pela empresa Petra Construções Ltda na cidade de São Luís.

Estudo da fibra de coco como reforço em tijolo de solocimento

To take care of to the demand of the new constructions in the low income communities and to develop the production of a strengthened alternative brick with staple fibers of coconut, capable to contribute mainly with the recycling of the green and mature coconut in the urban and agricultural lexes, this research was developed, to confection bricks of soil-cement with coconut fiber. Ecologically correct material and of low cost, since the greenhouse use of or oven for burning will be manufactured without. The study it presents a set of tables and graphs that prove good indices found in the values of the density, water absorption, axial compressive strength and isolation term acoustics, with evidential results that make possible the production in industrial character with press mechanics or the place of the workmanship with manual form. The preparation of coconut staple fibers was made of natural form without use of chemical products not to deprive of characteristics the properties mechanical physicist-chemistries and of the same ones. The sixty bricks produced in simple and manual press had been carried through in four lots of fifteen units. The mixture of aggregates was made in four different traces composites for: ground erinaceous, cement, fiber of dry coconut and water; the bricks had been compact in the press and cured in natural way under an area covered during the minimum time of seven days

Um olhar sobre as veredas rosianas.

The present work objective to study the configurations that the hinterland it acquires in the workmanship Great hinterland: trails, of Guimarães Rosa demonstrating as this author humanize this element, conferring to it characters universal mystics and through investigations, uncertainties, the auto-corrections of Riobaldo that become hinterland a metaphor of the human interior. Three are the chapters, that they will guide this work: the chapter 1 presents as element key for characterization of the epic one in Great hinterland: trails, the mining hinterland replete of trails, palco of exuberant vegetation, huge and multidimensional scene, where it has an entrecruzamento of fiction and reality. It retakes quarrel of critics as Manuel Cavalcanti Proença, Roberto Schwarz, on the existing epic character in the Great hinterland: trails, constructed from deriving myths of the universal culture, that they had been become popular. The brave and gracious knight, that it has its representabilidade in the popular culture. Thus the medieval hero, the knight represented for the Riobaldo personage, it is cognominado by Proença as Don Riobaldo of the Urucuia, knight of the general fields. O chapter 2 is a study on the popular culture in Rosa and Cascudo. Cascudo the example of Rosa also is exímio studious of the brazilian life, the regionalization and the popular manifestations proceeding from other cultures. O chapter 3 it has as focus of analysis two mitopoéticas personages: Diadorim e Luzia-Homem, which in the cited narratives they generally they assume functions generally atribute the men. Since children, if they dresses male. Valley to point out that Diadorim is not characterized as man, since in Great hinterland:trails if trajaq always as gunman. Luzia, when complete 18 anos pass if to dress as woman, but the stigma of male and female, inherited of the time where it coexisted the father folloies it for all the life. They suffer pain to have been born to fight and to não conhecer to love. They die you deliver the God. This study detects exactly that Diadorim and Luzia-Homem, are personages associates the myths of the universal culture and popular (sphinx, Jellyfish, Venus, Mother d water), that they possess similarities n the archetypes, that transit between the sexos masculine and feminine, without any sexual connotation, possesss it proper code of honr, of this not abdicating ahead of the death. Parallel, in this chapter two cascudianas workmanships willbe studies, that contemplate thematic of the dressed woman of man and being the woman without disguice: the enchantment tale Maria Gomes and romance Flower of tragics romances. The first one will be revisited in order to present subject in Great hinterland:trails through the Diadorim personage. As it will discourse on cases of brave women, cited for Cascudo, immortalized for the tradition, who had made history, that already is not disfarçam of men to carry through acts of bravery and honor.

Os Brutos: tradição literária e a memória cultural do Seridó

Partindo do princípio de que a força centralizadora do discurso do narrador sob o universo romanesco encontra-se regido por nuanças sócio-ideológicas que fazem parte do mundo psicológico do autor, procede-se uma leitura crítica de Os Brutos (1938), romance de estréia do escritor José Bezerra Gomes. O trabalho mencionado visa a tecer algumas considerações em torno do ponto de vista do narrador, enfocando a encenação do EU no cenário artístico-literário e sua interferência no modo de narração da citada obra. O procedimento metodológico adotado foi a pesquisa bibliográfica, e como aporte teórico recorreu-se à crítica especializada que trata da temática em questão. Ao final percebeu-se que o discurso do narrador possui um caráter ambivalente, o qual permite que o interlocutor presente não assuma uma perspectiva fixa diante do que narra

O complexo geográfico em os sertões de Euclides da Cunha

The relation between geography and literature if has shown sufficiently promising.When considering that as much geography how much literature, constructs representations of the space from its speeches we find initially the point of interaction between both.In this direction, the workmanship "Os Sertões‖ of Euclides of the Wedge in allows them to argue where measured the existing specifications in a literary composition they can directly interest geography in the construction of its representations about the space.However to construct this approach, we take as north the conceptions of the complexity in which we weave the idea of that the workmanship if constitutes a geographic complex.We detach thus, the language of "Os Sertões‖ as one of the aspects that specify the complex in the Euclidean narrative and that it can interest geography in the production of its knowledge.As well as the language, the imagination is understood while an element that in makes possible them to analyze, to understand and to find the direction of the images made use in the space hinterland

O cristo no terceiro milênio: a visão plástica da arte sacra atual de Cláudio Pastro

Pós-graduação em Artes - IA