An ergonomic approach to reorganize parking inspection agents` work productivity, health and safety in Sao Paulo, Brazil

Objective: The Traffic Engineering Company of the City of Sao Paulo (Brazil) observed a decrease in productivity, and an increase in sick leave, accidents and psychological distress among their parking inspection agents. To document this situation, qualitative research was undertaken to obtain an in-depth comprehension of work activity. Participants: Workers, managers and health and safety professionals contributed to the documentation of the problem and to the proposal of possible solutions. Methods: Ergonomic work analysis focusing on real work activity, as well as interviews with individual or groups of stakeholders, were conducted. Results: This research revealed that political-economic factors gradually contributed to: 1) an increasing work load; 2) growing fatigue throughout the day, increasing the workers` vulnerability to incidents and accidents and their tendency to react inappropriately to violence experienced on the street; and 3) excessive individual responsibility to manage dangerous situations. Conclusions: Recommendations to ameliorate the situation are proposed. These suggestions are discussed in terms of feasibility given the impact of macro social factors upon micro work activity, and the associated potential expansion of the ergonomist`s role.

Safety and sustainability research for university schools of fine arts

Designing new teaching programs for both undergraduate and graduate university studies involves integrating concepts and methodologies regarding quality, work safety and hazard prevention, and environmental protection. One of the challenges facing Spanish research within the realm of European Higher Education concerns health and safety issues in the Arts.In the case of Fine Arts, student exploration is one of the fundamental pillars of the study program; therefore it is imperative that art studios be optimized. This optimization affects both designated resources (infrastructures, materials, equipment, etc.) and organization of the teaching force.In this context, the aim of our research is to improve educational practices by designing quality measures that are both friendly to the environment and hazardous free. The aim here is to assure adequate art studio and laboratory management, and provide students with hazard free health and environmentally safe concepts that can be incorporated in their professional lives.The school of Fine Arts at the University of Barcelona is part of a pilot program, where our experience in educational innovation and research is serving as a reference for the implantation of OSHAS 18001 norms.

Safety and sustainability research for university schools of fine arts

Designing new teaching programs for both undergraduate and graduate university studies involves integrating concepts and methodologies regarding quality, work safety and hazard prevention, and environmental protection. One of the challenges facing Spanish research within the realm of European Higher Education concerns health and safety issues in the Arts.In the case of Fine Arts, student exploration is one of the fundamental pillars of the study program; therefore it is imperative that art studios be optimized. This optimization affects both designated resources (infrastructures, materials, equipment, etc.) and organization of the teaching force.In this context, the aim of our research is to improve educational practices by designing quality measures that are both friendly to the environment and hazardous free. The aim here is to assure adequate art studio and laboratory management, and provide students with hazard free health and environmentally safe concepts that can be incorporated in their professional lives.The school of Fine Arts at the University of Barcelona is part of a pilot program, where our experience in educational innovation and research is serving as a reference for the implantation of OSHAS 18001 norms.

Safety and sustainability research for university schools of fine arts

Designing new teaching programs for both undergraduate and graduate university studies involves integrating concepts and methodologies regarding quality, work safety and hazard prevention, and environmental protection. One of the challenges facing Spanish research within the realm of European Higher Education concerns health and safety issues in the Arts.In the case of Fine Arts, student exploration is one of the fundamental pillars of the study program; therefore it is imperative that art studios be optimized. This optimization affects both designated resources (infrastructures, materials, equipment, etc.) and organization of the teaching force.In this context, the aim of our research is to improve educational practices by designing quality measures that are both friendly to the environment and hazardous free. The aim here is to assure adequate art studio and laboratory management, and provide students with hazard free health and environmentally safe concepts that can be incorporated in their professional lives.The school of Fine Arts at the University of Barcelona is part of a pilot program, where our experience in educational innovation and research is serving as a reference for the implantation of OSHAS 18001 norms.

Street-level labour inspection in China and the implementation of ILO Convention No.155 concerning occupational safety and health

Les relations de travail et d'emploi sont devenues des enjeux importants en Chine. La Chine a ratifié 25 conventions internationales du travail et a travaillé en étroite collaboration avec l'OIT pour améliorer la sécurité et la santé au travail. Malgré ces efforts, la Chine est souvent critiquée pour des violations du travail. Face à ces problèmes, un système législatif d'administration de travail a été développé au niveau national. Mais l’application de ces règlements demeure problématique.. En particulier, les difficultés rencontrées par les inspecteurs du travail dans l'application de ces lois constituent un élément clé du problème. Notre mémoire s'intéresse essentiellement au rôle de l'inspecteur du travail dans l'administration publique de la sécurité du travail en Chine. Ces fonctionnaires jouent un rôle important et peuvent parfois exercer leur discrétion en tant qu'acteurs de première ligne, faisant d'eux de vrais décideurs politiques. Par conséquent, la compréhension de leur rôle et de leur discrétion dans l'application des normes du travail en Chine est cruciale. Notre mémoire est centré sur une étude de cas qualitative d'un bureau d'inspection du travail dans la région de Beijing. Dans le cadre de notre recherche nous avons examiné le rôle des inspecteurs du travail au moyen d’entretiens semi-structurés, d’une recherche documentaire ainsi qu’à l’occasion d’une brève observation des inspecteurs sur lors de la visite d’un lieu de travail. Les résultats démontrent que la définition du pouvoir discrétionnaire des inspecteurs du travail de première ligne en Chine est un enjeu très complexe. L’étude de cas permet cependant d’élaborer un cadre permettant l’identification des facteurs critiques déterminants pour l'évaluation et la compréhension de la nature du pouvoir discrétionnaire de l'inspecteur du travail en application de la loi.

Identification and control of occupational risks in a Sao Paulo metropolitan region quarry

Crushed stone mining is the third largest mining economy in Brazil, where almost half is produced in the Sao Paulo metropolitan region. The segment registers the highest number of accidents among the extractive industries, which justifies the concern with workers` health and safety, and the importance of controlling occupational hazards. Since 2002, the NR-22 Standard (NR-22: Occupational Health and Safety in Mining) makes compulsory the elaboration of a Risk Management Program that identifies risks and establishes control measures. Considering the crushed stone mining industry importance to the state, this paper evaluates and discusses the risks identified in unit operations during the production process of crushed stone in an open pit mine in order to propose control measures for the development of the Risk Management Program. Although this study refers to a specific quarry, it can be applied to other mines from the same sector since some considerations are made regarding differences in manufacturing processes. The research was based on the identification of the main risks associated with drilling, blasting, load & haulage, crushing and screening through field measurements of some hazardous agents, together with company reports. The results contributed to the choice of the appropriate control measures for the improvement Of workers` health and safety conditions.

Otimização do layout de marcenarias no sul do espírito santo baseado em parâmetros ergonômicos e de produtividade

Este estudo foi realizado em três marcenarias no sul do Estado do Espírito Santo, com o objetivo de analisar o layout e propor mudanças que otimizem o funcionamento harmônico entre o local de trabalho e o trabalhador, considerando-se fatores ergonômicos, fluxo de produção e produtividade. A coleta de dados foi feita analisando-se as condições do ambiente de trabalho (clima, ruído, iluminação) e aplicando uma entrevista para avaliar as condições gerais e de segurança no trabalho. O layout foi avaliado por medições, observação da sequência de trabalho nas máquinas e aplicação do software AutoCAD 2000. Os resultados indicaram que o Índice de Bulbo Úmido e o Termômetro de Globo estavam de acordo com a Norma Regulamentadora nº 15 (atividade moderada), sendo de 26,38 ºC, em média. Os níveis médios de ruído foram de 87,48 dB (A), acima do permitido para uma jornada de 8 h diárias (NR 15). A luminosidade média, encontrada em duas marcenarias, ficou acima da faixa de iluminação mínima recomendada para esse trabalho de maquinarias (NBR 5413/92). Todas as marcenarias tinham disposição desordenada do maquinário em razão da sequência lógica de trabalho, presença de pilastras e resíduos na área útil e de passagem, piso desnivelado, falta de rampas para acesso aos galpões, manutenção de máquinas e equipamentos de forma incorreta, falhas no telhado e ausência de bancadas para facilitar a adoção de uma melhor postura durante o manuseio das peças.

Risk Assessment of Chronic Exposure to Magnetic Fields near Electrical Apparatus

Conferência: 9th International Symposium on Occupational Safety and Hygiene (SHO) Guimaraes, Portugal - FEB 14-15, 2013

Cultura da (in) segurança nos contextos de trabalho em enfermagem: o caso do Hospital do Espírito Santo de Évora - E.P.E.

Mestrado em Intervenção Sócio-Organizacional na Saúde - Área de especialização: Políticas de Administração e Gestão de Serviços de Saúde

Satisfação profissional e vínculo laboral : prestadores de cuidados directos num hospital distrital

RESUMO - A flexibilidade dos contratos de trabalho é cada vez mais uma realidade. Em 2009, cerca de 18% da população activa em Portugal tinha um vínculo instável. Na instituição onde se realizou o estudo, 38,8% dos profissionais de saúde têm este tipo de vínculo. Este estudo foi realizado num hospital distrital com a participação de 103 prestadores de cuidados directos – assistentes operacionais, enfermeiros, médicos e técnicos de diagnóstico e terapêutica - aos quais foi dado um questionário de auto-resposta. Através deste, fez-se a comparação dos níveis de satisfação dos profissionais com diferentes tipos de vínculo. Concluiu-se que as dimensões mais valorizadas são as relacionais e condições de trabalho e saúde. A dimensão da Segurança no Emprego surge no meio da tabela. Ao contrário do que dizem os estudos, a autonomia e poder foi das menos valorizadas. Os profissionais com vínculo laboral instável dão maior importância à segurança. As dimensões relacionais são as que apresentam maiores níveis de satisfação. As que apresentam menores níveis são a Remuneração, Condições de Trabalho e Saúde e Segurança no Emprego, sendo que nesta ultima se registam diferenças significativas entre profissionais com diferentes tipos de vínculo. Verifica-se com 95% de confiança que existem diferenças significativas na dimensão da Segurança no Emprego, onde os profissionais com vínculo instável apresentam menores níveis de satisfação. Os profissionais com vínculo instável demonstram que este facto lhes trouxe consequências negativas ao nível pessoal e social. Não existe significância na diferença entre os níveis da satisfação dos profissionais de saúde com diferentes vínculos. -----------------------------------ABSTRACT - Employment contract flexibility is becoming a reality with each passing day. In 2009, around 18% of the active population in Portugal had an unstable bond. In the institution where this study was conducted, 38.8% of the health professionals have this kind of arrangement. This study was conducted in a district hospital with the participation of 103 direct care providers - operating assistants, nurses, doctors and technical diagnostic and therapeutic - that were given a self-response questionnaire. Through this questionnaire, the levels of satisfaction of the professionals with different types of employment bond were compared. It was concluded that the most valued dimensions are relational and work and health conditions. Work security appears in the middle of the table. Contrary to what studies say, autonomy and power were less valued. Professionals with an unstable bond give greater importance to safety. The relational dimensions are those with higher levels of satisfaction. Those with lower levels are the wages, working conditions and health and safety in employment, where in health and safety in employment show significant differences between professionals with different types of employment bond. We can verify with a 95% confidence interval that there are significant differences in the work safety dimension, where professionals with unstable employment bonds present lower levels of satisfaction. Professionals with an unstable employment bond show that this fact brought them negative consequences at the personal and social level. There is no significant difference between the levels of satisfaction of health professionals with different types of employment bond.

Coordenação de segurança em obra: metodologia, técnicas e ferramentas

Dissertação de mestrado integrado em Engenharia Civil

Hitsaussuojakaasujen tehokas ja taloudellinen käyttö

Suojakaasun päätehtävänä on suojata hitsaustapahtumaa ympäröivän ilman vaikutukselta. Päätehtävän lisäksi suojakaasullavoidaan vaikuttaa suoraan tai välillisesti lähes kaikkiin hitsauksen asioihin, joista laatu, tehokkuus ja taloudellisuus muodostuvat. Suojakaasuja tarvitsevat hitsausmenetelmät ovat: kaasukaarihitsausprosessit (MIG/MAG-, TIG- ja plasmahitsaus), laserhitsaus sekä näiden yhdistelmät eli hybridihitsausmenetelmät sekä MIG-juotto. Hitsaussuojakaasujen peruskaasu tänä päivänä on argon, johon hitsausprosessista tai materiaalistariippuen sekoitetaan hiilidioksidia, heliumia, vetyä tai happea. Pääsääntöisesti hitsaussuojakaasut ovat kahden komponentin kaasuja, mutta 3-komponenttikaasut ovat yleistymässä. Sopivalla suojakaasuseostuksella saadaan erittäin merkittävä hyöty tuottavuuden lisääntyessä ja laadun parantuessa. Suojakaasujen oikealla toimitusmuodolla on merkittävä vaikutus kokonaiskustannuksiin. Uudet, kehittyneet sekoitinlaitteet mahdollistavat tarkat osakomponenttien sekoittamiset hitsauspaikalla. Seokset ovat jatkuvasti analysoitavissa ja jäljitettävissä. Suojakaasujen kierrätys on erityisesti kalliiden kaasujen, kuten helium ja argon, kohdalta tulevaisuuden haaste ja mahdollisuus. Suojakaasulla on suuri merkitys hitsauksen tuottavuuteen, taloudellisuuteen ja myös hitsausympäristöön ja työturvallisuuteen. Robottihitsauksen lisääntyminen asettaa vaatimuksia, joihinoikein valitulla suojakaasulla voidaan myönteisesti vaikuttaa. Tehokashitsaus on valmistusprosessin tärkeä osa, jossa oikein valituilla suojakaasuilla saavutetaan merkittävä tuottavuuden lisäys vaikuttamalla kaariominaisuuksiin, tunkeumaan, roiskeisiin, nopeuteen, hitsimetallurgiaan, lämmöntuontiin ja hitsausympäristöön. Diplomityössä tutkittiin casena Peikko Finland Oy:n suojakaasujärjestelmät, niiden tehokkuus, toimivuus ja sopivuus konepajan tuotantoon ja erityisesti robottihitsaukseen.