A capability-based view of organisational renewal : Combining opportunity- and advantage-seeking growth in large, established European and North American wood-industry companies

The purpose of this study was to extend understanding of how large firms pursuing sustained and profitable growth manage organisational renewal. A multiple-case study was conducted in 27 North American and European wood-industry companies, of which 11 were chosen for closer study. The study combined the organisational-capabilities approach to strategic management with corporate-entrepreneurship thinking. It charted the further development of an identification and classification system for capabilities comprising three dimensions: (i) the dynamism between firm-specific and industry-significant capabilities, (ii) hierarchies of capabilities and capability portfolios, and (iii) their internal structure. Capability building was analysed in the context of the organisational design, the technological systems and the type of resource-bundling process (creating new vs. entrenching existing capabilities). The thesis describes the current capability portfolios and the organisational changes in the case companies. It also clarifies the mechanisms through which companies can influence the balance between knowledge search and the efficiency of knowledge transfer and integration in their daily business activities, and consequently the diversity of their capability portfolio and the breadth and novelty of their product/service range. The largest wood-industry companies of today must develop a seemingly dual strategic focus: they have to combine leading-edge, innovative solutions with cost-efficient, large-scale production. The use of modern technology in production was no longer a primary source of competitiveness in the case companies, but rather belonged to the portfolio of basic capabilities. Knowledge and information management had become an industry imperative, on a par with cost effectiveness. Yet, during the period of this research, the case companies were better in supporting growth in volume of the existing activity than growth through new economic activities. Customer-driven, incremental innovation was preferred over firm-driven innovation through experimentation. The three main constraints on organisational renewal were the lack of slack resources, the aim for lean, centralised designs, and the inward-bound communication climate.

Dimensionality of quality from a customer perspective in the wood industry

The research analyzes product quality from a customer perspective in the case of the wood products industry. Of specific interest is to understand better how environmental quality is perceived from a customer perspective. The empirical material used comprises four data-sets from Finland, Germany and the UK, collected during 1992 2004. The methods consist of a set of quantitative statistical analyses. The results indicate that perceived quality from a customer perspective can be presented using a multidimensional and hierarchical construct with tangible and intangible dimensions, that is common to different markets and products. This applies in the case of wood products but also more generally at least for some other construction materials. For wood products, tangible product quality has two main sub-dimensions: technical quality and appearance. For product intangibles, a few main quality dimensions seem be detectable: Quality of intangibles related to the physical product, such as environmental issues and product-related information, supplier-related characteristics, and service and sales personnel behavior. Environmental quality and information are often perceived as being inter-related. Technical performance and appearance are the most important considerations for customers in the case of wood products. Organizational customers in particular also clearly consider certain intangible quality dimensions to be important, such as service and supplier reliability. The high technical quality may be considered as a license to operate , but product appearance and intangible quality provide potential for differentiation for attracting certain market segments. Intangible quality issues are those where Nordic suppliers underperform in comparison to their Central-European competitors on the important German markets. Environmental quality may not have been used to its full extent to attract customers. One possibility is to increase the availability of the environment-related information, or to develop environment-related product characteristics to also provide some individual benefits. Information technology provides clear potential to facilitate information-based quality improvements, which was clearly recognized by Finnish forest industry already in the early 1990s. The results indeed indicate that wood products markets are segmented with regard to quality demands

The cutting stock problem in the wood industry

This thesis proposes a solution for board cutting in the wood industry with the aim of usage minimization and machine productivity. The problem is dealt with as a Two-Dimensional Cutting Stock Problem and specific Combinatorial Optimization methods are used to solve it considering the features of the real problem.

Young people's perceptions of the wood products industry : a relational view

The basis for this study was in poor attractiveness of the wood products industry among young people as a field to study and work in. The purpose was to produce new information of how to improve the relationship between young people and the wood products industry in order to better attract young people with different relational orientation. A survey was conducted among students of comprehensive schools and students of wood industry at vocational schools selected by systematic cluster sampling. The final sample consisted of 613 students. The study combined the theories and concepts of relationships, communication and trust of several disciplines. In addition, it applied theories of relationship marketing, stakeholders, publics, involvement and concepts of reputation and values. It studied the central relational elements in the form of antecedents, relationship state and its consequences. The study examined, how young people with different background and level of interest perceive wood industry as a field to study and work in from relational point of view, what are the central deficiencies in perceived relational elements and what are the public relations activities enhancing the relationship between wood industry and young people with less and high interest in the sector. The results indicate poor visibility of the wood industry among young people: unfamiliarity with the industry and unawareness of the opportunities to study in the field. It appeared that instead of increasing only information sharing, interactive communication in different forms is needed. The study also suggests that behaviors of the industry sector advancing perceived trustworthiness are of crucial importance. Moreover, the wood industry needs to pay attention to its behaviors and communication also among other stakeholder groups, especially the media, as reputation plays an important role in building up trust and satisfaction between young people and the sector. Finally, the less and highly interested young people were found to assess the relationship partly through different relational elements. In order to develop the relationship with highly interested young people they should be regarded clearly as future employees of the wood industry through activities affirming that they are desired and valued employees in the sector. Further, openness of information disclosure, whether concerning current situation or future prospects, seems to increase credibility and attractiveness of the wood industry. Highly interested young people were also found to appreciate socially responsible activities. The less interested young people seem to be insecure about the reliability of the wood industry as an employer, as well as, its ability and interest to invest in young people s skills. In addition,involvement in issues relevant for young people was found crucial in enhancing the relationship with the less interested young people.The conclusions of the study provide tools for enhancing the attractiveness of the wood industry among young people not only to the industry itself, but also to its advocates, teachers and student counselors of comprehensive and vocational schools, authorities and policy makers.

Experimental Reinforcement of Wood Beams

Rehabilitation is becoming more and more usual in the construction sector in Portugal. The introduction of newer construction materials and technical know-how of integrating different materials for achieving desired engineering goals is an important step to the development of the sector. Wood industry is also getting more and more adapted to composite technologies with the introduction of the so called “highly engineered wood products” and with the use of modification treatments. This work is an attempt to explain the viability of using stainless steel and glass fibre reinforced polymer (GFRP) as reinforcements in wood beams. This thesis specifically focuses on the flexural behaviour of Portuguese Pine unmodified and modified wood beams. Two types of modification were used: 1,3-dimethylol-4,5- dihydroxyethyleneurea (DMDHEU) resin and amid wax. The behaviour of the material was analysed with a nonlinear model. The latter model simulates the behaviour of the reinforced wood beams under flexural loading. Small-scale beams (1:15) were experimented in flexural bending and the experimental results obtained were compared with the analytical model results. The experiments confirm the viability of the reinforcing schemes and the working procedures. Experimental results showed fair agreement with the nonlinear model. A strength increase between 15% and 80% was achieved. Stiffness increased by 40% to 50% in beams reinforced with steel but no significant increase was achieved with the glass fibre reinforcement.

A cost-based optimization of a fiberboard pressing plant using Monte-Carlo simulation (a reliability program)

In this research the reliability and availability of fiberboard pressing plant is assessed and a cost-based optimization of the system using the Monte- Carlo simulation method is performed. The woodchip and pulp or engineered wood industry in Australia and around the world is a lucrative industry. One such industry is hardboard. The pressing system is the main system, as it converts the wet pulp to fiberboard. The assessment identified the pressing system has the highest downtime throughout the plant plus it represents the bottleneck in the process. A survey in the late nineties revealed there are over one thousand plants around the world, with the pressing system being a common system among these plants. No work has been done to assess or estimate the reliability of such a pressing system; therefore this assessment can be used for assessing any plant of this type.

Exigências funcionais em pavimentos de madeira

Durante séculos a madeira foi dos materiais mais privilegiados e usados na construção. Ainda hoje, existem construções antigas em madeira em bom estado de conservação e que, desempenham as suas funções adequadamente. Com o aparecimento do betão e do aço, os projetistas deixaram de usar este tipo de estruturas. Isto provocou um desinteresse na indústria da madeira, adiando a criação de regulamentos e normas relativamente às exigências funcionais deste tipo de estruturas. Com a necessidade da reabilitação do património edificado, verifica-se uma inversão desta tendência, devido às edificações no centro histórico serem constituídas por estruturas de madeira, essencialmente os pavimentos e coberturas. Na maioria das vezes estas estruturas apresentam um elevado nível de degradação e a solução mais rentável é demolir. Os pavimentos de madeira são então substituídos por lajes aligeiradas ou de betão armado provocando alterações estruturais inadequadas nas fachadas a manter. Pretende-se com esta dissertação mostrar as potencialidades dos pavimentos de madeira e assim incentivar ao seu uso, principalmente nas áreas a reabilitar. São analisados todos os regulamentos e normas aplicáveis às exigências estruturais, térmicas, acústicas e contra incêndio dos pavimentos de madeira. A análise da normalização aplicável vai ser sintetizada, ou seja, só vão ser referidos os aspetos a ter em conta para a verificação das exigências funcionais em pavimentos de madeira. A aplicação dos conceitos e das verificações necessárias são aplicadas a um pavimento de madeira a ser construído na parcela C4 do Quarteirão das Cardosas. Os resultados obtidos neste caso de estudo são encorajadores, e abrem uma perspetiva das potencialidades que este sistema construtivo apresenta.

Crise du secteur manufacturier au Québec : ampleur et nature des restructurations impliquant des licenciements collectifs entre 2003 et 2008

Des données de Statistique Canada montrent que le Québec a perdu 86 700 emplois manufacturiers nets entre 2004 et 2008, ce qui représente un recul de 13,8% (Bernard, 2009). Un dollar canadien fort, la concurrence internationale, les délocalisations de la production et les consolidations globales d'opérations sont souvent mentionnés comme étant les causes des difficultés du secteur manufacturier canadien - principalement concentré au Québec et en Ontario. La crise financière amorcée à l’été 2007, a contribué à aggraver la crise propre au secteur manufacturier dont les origines remontent au début des années 2000 (Weir, 2007; AgirE, 2008; Pilat et al., 2006). Cette recherche examine le processus de restructuration du secteur manufacturier québécois de manière détaillée au niveau des établissements afin d’en évaluer l’ampleur et la nature entre 2003 et 2008. Les données colligées permettent de poser un regard unique et original sur les restructurations ayant impliqué des licenciements collectifs au Québec. Ces données sont issues de deux sources. D'abord, nous avons utilisé une liste d‘entreprises qui ont envoyé un avis de licenciement collectif au Ministère de l’Emploi et de la Solidarité sociale du Québec entre 2003 et 2008. En second lieu, nous avons eu recours aux archives en ligne des médias pour trouver d’autres évènements de restructuration non rapportés par le ministère ainsi que pour obtenir des informations complémentaires sur les évènements déjà compilés dans la liste du ministère. Notre méthodologie de recherche et notre typologie analytique des types de restructuration sont basées sur celles développées par l’European Monitoring Center on Change (EMCC) et reprises dans certaines études comme celles de Bronfenbrenner et Luce (2004) et Hickey et Schenk (soumis). Les résultats, présentés en termes d’événements de restructuration et d’emplois perdus, sont ventilés en fonction de quelques variables (année d’occurrence, taille de l’établissement, sous-secteur d’activité, intensité technologique, région administrative, types de restructuration). Les raisons données par l’entreprise afin de justifier la restructuration ont aussi été colligées. Au cours de la période étudiée, nous avons identifié au total 1 631 évènements de restructurations dans le secteur manufacturier à travers toutes les régions du Québec, qui ont entraîné la perte de 129 383 emplois. Ainsi, 78 246 emplois ont été perdus suite à la réduction des activités de l‘établissement et 51 137 emplois l’ont été suite à la fermeture de leur établissement. La forme la plus fréquente de restructuration est la restructuration interne, suivi par la faillite/fermeture. Les types de restructuration qui ont engendré le plus de pertes d’emplois en moyenne par évènement sont dans l’ordre, la délocalisation, la sous-traitance, la consolidation d’activités ainsi que la fusion-acquisition. L’année 2008 fut celle où il y a eu le plus grand nombre de restructurations. Montréal et la Montérégie sont les régions qui ont le plus été touchées par la restructuration, les pertes d’emplois et les fermetures d’établissements. Les industries à faible intensité technologique ont davantage été frappées par la crise manufacturière. C’est le sous-secteur du papier et du bois qui connu le plus grand nombre d’événements de restructurations. Ce sous-secteur a aussi subi les pertes d’emplois les plus importantes, suivi par le sous-secteur du textile et du vêtement. Ces deux industries se partagent plus de la moitié des fermetures d’établissements. L’insuffisance de la demande (22,1%), la concurrence internationale (14,3%), la hausse de la valeur du dollar canadien (11,2%), la réorganisation interne de l’entreprise (11,1%), la rationalisation des coûts visant une augmentation de la profitabilité (10,1%) ainsi que les difficultés financières (9,9%) sont les motifs principaux donnés par les employeurs. Nos résultats montrent qu’il y a eu deux temps dans l’évolution de la restructuration du secteur manufacturier au Québec. Un premier temps au début de la période où des changements structurels profonds ont été observés dans certaines industries (p.ex. le bois-papier et le textile-vêtement) et un second temps, en fin de période caractérisé par des changements davantage liés à la conjoncture en raison de la crise économique dont les effets commençaient à se faire sentir à ce moment (Institut de la statistique du Québec, 2009a).

Immigration et alimentation à Montréal aux XVIIe et XVIIIe siècles : essai d’interprétation à partir d’analyses isotopiques sur des populations archéologiques

Afin d’étudier l’influence de la migration sur l’alimentation à Montréal aux XVIIe et XVIIIe siècles, 64 individus de la collection du cimetière Notre-Dame, daté de 1691 à 1796, ont fait l’objet d’analyses ostéologiques et isotopiques. Les analyses isotopiques ont portées sur le carbone (d13C) et l’azote (d15N) du collagène des os, ainsi que sur le d13C et l’oxygène (d18O) du carbonate de l’apatite des os et des dents (prémolaires et troisièmes molaires). Le d18O des dents a permis de définir approximativement trois régions d’origine (région de Montréal, région enrichie en 18O (i.e. Acadie, Louisiane, Nouvelle-Angleterre, France, Antilles et Afrique) et région appauvrie en 18O (intérieur des terres et plus au nord) pour 58 individus, et sept possibles parcours migratoire (N=27). Plus de la moitié de l’échantillon est composé d’individus possiblement natifs de Montréal (55 %). De plus, les résultats indiquent que les gens étaient peu mobiles avant l’âge de 16 ans. Toutefois, 12 individus ont entrepris des déplacements entre 7 et 16 ans, majoritairement d’un environnement enrichi vers Montréal (N=5) ou de Montréal vers une région appauvrie (N=5). L’âge de recrutement des mousses sur les navires, la traite de la fourrure, la coupe du bois et possiblement aussi l’esclavage pourraient expliquer cette « jeune » migration. Sur le plan alimentaire, les végétaux de type C3, la viande nourrie aux ressources C3 et le poisson faisaient partie du menu montréalais. Les plantes C4 (majoritairement maïs mais aussi sucre de canne [rhum]) étaient consommées en quantité variable. La question de l’influence de la migration sur l’alimentation n’a pu être explorée en profondeur en raison de contraintes liées à la contamination du d18O du carbonate des os. La combinaison des données ostéologiques et isotopiques à la distribution spatiale des sépultures, a permis d’étudier un aspect de l’archéologie funéraire à l’échelle individuelle (identité possible), sans toutefois fournir de résultats probants, à l’échelle du cimetière et de son organisation globale.

Determinação do módulo de elasticidade da madeira juvenil e adulta de Pinus taeda por ultra-som

A madeira de Pinus sp. tem utilização crescente na indústria madeireira brasileira. O decréscimo constante do suprimento de árvores adultas com grandes diâmetros, provenientes de florestas naturais, tornou comum a produção de madeira em ciclos curtos, com grande proporção de madeira juvenil. Resultados de diversas pesquisas têm reportado que o módulo de elasticidade e a resistência a diferentes solicitações mecânicas são seriamente afetados pela presença de madeira juvenil. Este trabalho teve por objetivo determinar o módulo de elasticidade da madeira juvenil e adulta de Pinus taeda L. a partir da constante dinâmica C LL, obtida em ensaios não-destrutivos de ultra-som. A madeira de P. taeda era originária de plantios da Estação Experimental de Itapeva - SP, sendo amostrados seis indivíduos arbóreos com 34 anos de idade. Os corpos-de-prova (4 cm x 4 cm x 45 cm) foram obtidos separadamente das regiões de madeira juvenil e adulta da prancha central, previamente submetida à secagem industrial (umidade final de 12%), para a determinação da constante dinâmica por meio de ensaios de ultra-som. Para avaliar a sensibilidade do método do ultra-som, os corpos-de-prova foram ensaiados destrutivamente à compressão paralela. Os resultados mostraram boa sensibilidade do método do ultra-som (R² » 0,90) na avaliação desse parâmetro mecânico da madeira juvenil e adulta.

Influência das características dos anéis de crescimento na densidade, resistência e rigidez da madeira de Pinus taeda L

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Determinação da densidade da madeira de clones de Eucalyptus spp. a idades passadas com uso da técnica de atenuação de radiação gama

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Sistema fuzzy de suporte a decisão para aplicação de programa de eficiência energética em serrarias

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Contribuição para o desenvolvimento de compósito cimento-madeira com materiais da região amazônica

Este trabalho objetiva contribuir para a aplicação do resíduo do tecido lenhoso de espécies vegetais tropicais, na forma de serragem, proveniente da indústria madeireira do estado do Pará; da região metropolitana de Belém em particular; para a fabricação de compósito madeira-cimento. Devido à natural incompatibilidade química entre a madeira e o cimento, este procedimento resulta em um retardamento de pega, de intensidade dependente da espécie vegetal utilizada. Este efeito pode ser combatido com diversos processos, como por exemplo, a aditivação da mistura com aceleradores de pega, a mineralização da madeira, a carbonatação acelerada, dentre outros. As análises foram feitas a partir da resistência à compressão aos 28 dias para argamassas produzidas com teores de madeira de 2, 3,5 e 5% em massa; com cimento CP I e CP II, e ainda com e sem o uso de aditivo acelerador de pega a base de cloreto de cálcio. Assim sendo, os resultados obtidos foram analisados estatisticamente para que a influência do teor de madeira e da aditivação à base de cloreto de cálcio na resistência à compressão fosse avaliada. A maioria dos trabalhos existentes utiliza espécies de clima temperado, e de reflorestamento; pouco tendo sido avaliado para espécies de clima tropical. Neste sentido, o presente trabalho representa um esforço pioneiro no desenvolvimento de compósitos madeira-cimento para os materiais e resíduos disponíveis na região Amazônica.

Estudo da emissão e do controle dos gases e particulados provenientes da queima de biomassa

Pós-graduação em Engenharia Mecânica - FEG