Empirical models for estimating the suspended sediment concentration in Amazonian white water rivers using Landsat 5/TM

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Stable oxygen isotope and Mg/Ca data of Globigerinoides ruber white, water stable oxygen isotope data, SST and MAT records of sediment core GeoB6211-2

During Termination 1, millennial-scale weakening events of the Atlantic meridional overturning circulation (AMOC) supposedly produced major changes in sea surface temperatures (SSTs) of the western South Atlantic, and in mean air temperatures (MATs) over southeastern South America. It has been suggested, for instance, that the Brazil Current (BC) would strengthen (weaken) and the North Brazil Current (NBC) would weaken (strengthen) during slowdown (speed-up) events of the AMOC. This anti-phase pattern was claimed to be a necessary response to the decreased North Atlantic heat piracy during periods of weak AMOC. However, the thermal evolution of the western South Atlantic and the adjacent continent is so far largely unknown. Here we address this issue, presenting high-temporal-resolution SST and MAT records from the BC and southeastern South America, respectively. We identify a warming in the western South Atlantic during Heinrich Stadial 1 (HS1), which is followed first by a drop and then by increasing temperatures during the Bølling-Allerød, in phase with an existing SST record from the NBC. Additionally, a similar SST evolution is shown by a southernmost eastern South Atlantic record, suggesting a South Atlantic-wide pattern in SST evolution during most of Termination 1. Over southeastern South America, our MAT record shows a two-step increase during Termination 1, synchronous with atmospheric CO2 rise (i.e., during the second half of HS1 and during the Younger Dryas), and lagging abrupt SST changes by several thousand years. This delay corroborates the notion that the long duration of HS1 was fundamental in driving the Earth out of the last glacial.

Journal of the life, travels, and gospel labours of William Williams, dec., a minister of the Society of Friends, late of White-Water, Indiana.

Smith, J. Friends' books,

Extracts, &c. from the minutes of Indiana Yearly Meeting held at White-Water, 10th month, 1827.

Mode of access: Internet.

White water lily (Nyphaea odorata)

http://digitalcommons.fiu.edu/fce_lter_photos/1276/thumbnail.jpg

Acquisition and transfer of experiential learning from rock climbing to the corporate workplace

There were three purposes to this study. The first purpose was to determine how learning can be influenced by various factors i~ the rock climbing experience. The second purpose was to examine what people can learn from the rock climbing experience. The third purpose was to investigate whether that learning can transfer from the rock climbing experience to the subjects' real life in the workplace. Ninety employees from a financial corporation in the Niagara Region volunteered for this study. All subjects were surveyed throughout a one-day treatment. Ten were purposefully selected one month later for interviews. Ten themes emerged from the subjects in terms of what was learned. Inspiration, motivation, and determination, preparation, goals and limitations, perceptions and expectations, confidence and risk taking, trust and support, teamwork, feedback and encouragement, learning from failure, and finally, skills and flow. All participants were able to transfer what was learned back to the workplace. The results of this study suggested that subjects' learning was influenced by their ability to: take risks in a safe environment, fail without penalty, support each other, plan without time constraints, and enjoy the company of fellow workers that they wouldn't normally associate with. Future directions for research should include different types of treatments such as white water rafting, sky diving, tall ship sailing, or caving.

Fear and adventure tourism in Brazil

The search for new non-routine emotions and sensations has become a decisive factor in taking part in adventure tourism. As Barros and Dines (2000) have pointed out, Brazil's natural resources are abundant and have been widely used to promote the nation's tourism. Empirical literature describes fear as one of the main emotions in adventure activities, and for this reason a questionnaire was designed to examine the presence of fear before and after three adventure activities (parachuting, white-water rafting, and rock-climbing). This study not only aimed to consolidate fear as a fundamental emotion in performing such activities but also to stimulate interest for further studies in this area. (C) 2009 Elsevier Ltd. All rights reserved.

A case study of the Ottawa Valley whitewater rafting industry : standards and risks

This qualitative case study identifies and discusses the standards and risk management practices of the Ottawa Valley whitewater rafting industry and the impacts of the government enforced Special-purpose Vessels Regulations are discussed. Data collection occurred using a single case study design, which included interviews and document analysis. This study found that internal, industry, and actual standards are influenced through a variety of sources. These standards were found to affect the risk management practices of commercial whitewater rafting providers. In general, these standards promoted a high level of risk management within the Ottawa Valley rafting industry. The Special-purpose Vessels Regulations were found to be non-influential in raising the risk management standards of the Ottawa Valley whitewater rafting industry.

Concordance between macroinvertebrate communities and the typological classification of white and clear-water streams in Western Brazilian Amazonia

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Experimental determination of effects of water depth on Nymphaea odorata growth, morphology and biomass allocation

Growth, morphology and biomass allocation in response to water depth was studied in white water lily,Nymphaea odorata Aiton. Plants were grown for 13 months in 30, 60 and 90 cm water in outdoor mesocosms in southern Florida. Water lily plant growth was distinctly seasonal with plants at all water levels producing more and larger leaves and more flowers in the warmer months. Plants in 30 cm water produced more but smaller and shorter-lived leaves than plants at 60 cm and 90 cm water levels. Although plants did not differ significantly in total biomass at harvest, plants in deeper water had significantly greater biomass allocated to leaves and roots, while plants in 30 cm water had significantly greater biomass allocated to rhizomes. Although lamina area and petiole length increased significantly with water level, lamina specific weight did not differ among water levels. Petiole specific weight increased significantly with increasing water level, implying a greater cost to tethering the larger laminae in deeper water. Lamina length and width scaled similarly at different water levels and modeled lamina area (LA) accurately (LAmodeled = 0.98LAmeasured + 3.96, R2 = 0.99). Lamina area was highly correlated with lamina weight (LW = 8.43LA − 66.78, R2 = 0.93), so simple linear measurements can predict water lily lamina area and lamina weight. These relationships were used to calculate monthly lamina surface area in the mesocosms. Plants in 30 cm water had lower total photosynthetic surface area than plants in 60 cm and 90 cm water levels throughout, and in the summer plants in 90 cm water showed a great increase in photosynthetic surface area as compared to plants in shallower water. These results support setting Everglades restoration water depth targets for sloughs at depths ≥45 cm and suggest that in the summer optimal growth for white water lilies occurs at depths ≥75 cm.

The Art of Freestyle

"This book is intended to be instructional, inspirational and of interest to both novice and expert alike. The assumption is made that to even begin to playboat the paddler will already be an intermdiate white water boater familiar with basic strokes and boating skills. For the interested non paddler a glossary of terms is included. Part One gives an overview of the sport and lays the foundations of understanding on which the rest of the book builds, as well as exploring safety issues and exploring key concepts. Part Two describes and coaches the moves which are divided into intermediate and advanced standard. Part Three looks at how to train in order to hone your physical and mental skills and be 'the best you can be'. Never before has so much freestyle, rodeo and playboating information from so many great boaters been gathered together in one place. In a world dominated by the biggest, the fastest, the loudest...the most big headed, this book makes a stand. Whilst of course covering all the latest moves, the authors have not been frightened to start right back at basic concepts. Technical ability is nothing without knowledge, without planning and without stamina. This book tells you the secrets. Freestyle is a thinking person's sport. The authors, the contributors and the book's publisher have an unrivalled breadth of knowledge in this field, so let this book do some of the thinking for you. The full colour format and the emphasis on personal training and coaching make for a particularly easy read. When planning my preparation or training before a competition, I always try to evaluate its potential benefits in terms of how many places it will have helped me move up in the final results. As a general rule in life, any time spent off the water should be viewed with suspicion! However, use this time constructively and absorb the information in this book and you will reap your own rewards. The Art of Freestyle is a book genuinely written by paddlers for paddlers. It is often a hard task to get top athletes to part with their preferred training or competition techniques, but this book is full of such 'Top Tips'. This is not a book written just by its authors, but by a wealth of accomplished paddlers. It is this subtle combination that keeps the reader in the real world...believing in a move, not just imagining it. This is the real world...believe you can do it."--Playak Website

Microbial life and deposits in paper machine circuits

Väitöskirjani käsittele mikrobien ja erilaisten kemikaalien rooleja saostumien ja biofilmien muodostumisessa paperi- ja kartonkikoneilla. "Saostuma" tässä työssä tarkoittaa kiinteän aineen kertymää konepinnoille tai rajapinnoille konekierroissa, jotka on tarkoitettu massasulppujen, lietteiden, vesien tai ilman kuljetukseen. Saostumasta tulee "biofilmi" silloin kun sen oleellinen rakennekomponentti on mikrobisolut tai niiden tuotteet. Väitöstyöni työhypoteesina oli, että i. tietämys saostumien koostumuksesta, sekä ii. niiden rakenteesta, biologisista, fysikaalis-kemiallisista ja teknisistä ominaisuuksista ohjaavat tutkijaa löytämään ympäristöä säästäviä keinoja estää epätoivottujen saostumien muodostus tai purkaa jo muodostuneita saostumia. Selvittääkseni saostumien koostumista ja rakennetta käytin monia erilaisia analytiikan työkaluja, kuten elektronimikroskopiaa, konfokaali-laser mikroskopiaa (CLSM), energiadispersiivistä röntgenanalyysiä (EDX), pyrolyysi kaasukromatografiaa yhdistettynä massaspektrometriaan (Py-GCMS), joninvaihtokromatografiaa, kaasukromatografiaa ja mikrobiologisia analyysejä. Osallistuin aktiivisesti innovatiivisen, valon takaisinsirontaan perustuvan sensorin kehittämistyöhön, käytettäväksi biofilmin kasvun mittaukseen suoraan koneen vesikierroista ja säiliöistä. Työni osoitti, että monet paperinvalmistuksessa käytetyistä kemikaaleista reagoivat keskenään tuottaen orgaanisia tahmakerroksia konekiertojen teräspinnoille. Löysin myös kerrostumia, jotka valomikroskooppisessa tarkastelussa oli tulkittu mikrobeiksi, mutta jotka elektronimikroskopia paljasti alunasta syntyneiksi, alumiinihydroksidiksi joka saostui pH:ssa 6,8 kiertokuitua käyttävän koneen viiravesistä. Monet paperintekijät käyttävät vieläkin alunaa kiinnitysaineena vaikka prosessiolot ovat muuttuneet happamista neutraaleiksi. Sitä pidetään paperitekijän "aspiriinina", mutta väitöstutkimukseni osoitti sen riskit. Löysin myös orgaanisia saostumia, joiden alkuperä oli aineiden, kuten pihkan, saippuoituminen (kalsium saippuat) niin että muodostui tahmankasvua ylläpitävä alusta monilla paperi- ja kartonkikoneilla. Näin solumuodoiltaan Deinococcus geothermalista muistuttavia bakteereita kasvamassa lujasti teräskoepalojen pintaan kiinnittyneinä pesäkkeinä, kun koepaloja upotettiin paperikoneiden vesikiertoihin. Nämä deinokokkimaiset pesäkkeet voivat toimia jalustana, tarttumisalustana muiden mikrobien massoille, joka selittäisi miksi saostumat yleisesti sisältävät deinokokkeja pienenä, muttei koskaan pääasiallisena rakenneosana. Kun paperikoneiden käyttämien vesien (raakavedet, lämminvesi, biologisesti puhdistettu jätevesi) laatua tutkitaan, mittausmenetelmällä on suuri merkitys. Koepalan upotusmenetelmällä todettu biofilmikasvu ja viljelmenetelmällä mitattu bakteerisaastuneisuus korreloivat toisiinsa huonosti etenkin silloin kun likaantumisessa oli mukana rihmamaiseti kasvavia bakteereja. Huoli ympäristöstä on pakottanut paperi- ja kartonkikoneiden vesikiertojen sulkemiseen. Vesien kierrätys ja prosessivesien uudelleenkäyttö nostavat prosessilämpötilaa ja lisäävät koneella kiertävien kolloidisten ja liuenneiden aineiden määriä. Tutkin kiertovesien pitoisuuksia kolmessa eriasteisesti suljetussa tehtaassa, joiden päästöt olivat 0 m3, 0,5 m3 ja 4 m3 jätevettä tuotetonnia kohden, perustuen puhdistetun jäteveden uudelleen käyttöön. Nollapäästöisellä tehtaalla kiertovesiin kertyi paljon orgaanisesti sidottua hiiltä (> 10 g L-1), etenkin haihtuvina happoina (maito-, etikka-, propioni- ja voi-). Myös sulfaatteja, klorideja, natriumia ja kalsiumia kertyi paljon, > 1 g L-1 kutakin. Pääosa (>40%) kaikista bakteereista oli 16S rRNA geenisekvenssianalyysien tulosten perusteella sukua, joskin etäistä (< 96%) ainoastaan Enterococcus cecorum bakteerille. 4 m3 päästävältä tehtaalta löytyi lisäksi Bacillus thermoamylovorans ja Bacillus coagulans. Tehtaiden saostumat sisälsivät arkkeja suurina pitoisuuksina, ≥ 108 g-1, mutta tunnistukseen riittävää sekvenssisamanlaisuutta löytyi vain yhteen arkkisukuun, Methanothrix. Tutkimustulokset osoittivat että tehtaan vesikiertojen sulkeminen vähensi rajusti mikrobiston monimuotoisuutta, muttei estänyt liuenneen aineen ja kiintoaineen mineralisoitumista.

Rapid changes in the vegetation of a shallow pond in Epping Forest, related to recent droughts

Over much of Britain, 1995 and 1996 have been perceived as drought years. To evaluate the impact that local climatic conditions are having upon successional changes in higher vegetation (macrophytes), Speakmans Pond in Epping Forest was surveyed and mapped in 1996. The results are related to previous vegetation surveys carried out in 1989 and 1991. In 1989 the dominant marginal vegetation was floating sweet-grass Glyceria fluitans, which also covered a major part of the main body of the pond. Other abundant species included soft rush Juncus effusus, reed mace Typha latifolia and yellow flag Iris pseudocorus. A small (central) area of open water contained bladderwort Utricularia vulgaris and white water-lily Nymphaea alba. A similar plant coverage was found in 1991, with a dominance of floating sweet-grass along the shallow eastern edge. A marked change in the pond was found during the 1996 survey of vegetation in July, when the pool was dry. The major plant cover now consisted of creeping bent Agrostis stolonifera, with isolated clumps of Yorkshire fog Holcus lanatus around the edges; both are terrestrial grasses found on land surrounding the pond. Rushes (Juncus) had increased their distribution round the margins of the pond, and the patch of yellow flag noted in 1989 and 1991 was not found in 1996. The deeper trenches were also dry, but a small patch of white water-lily remained adjacent to one of the trenches.

Piraguak garraiatzeko sistemaren diseinua.

[EU]Ur bizietako piraguak edonolako ingurune basatietan garraiatzeko sistema baten diseinua garatuko du txosten honek. Horretarako dagoeneko existitzen diren modeloei erreparatuko zaie. Sistemak bete behar dituen ezaugarriak erabaki ondoren, diseinuari ekingo zaio. Hasierako ideietatik abiatuz amaierako diseinura iritsi arte fintze etapa ezberdinak burutuko dira. Haietariko azkenean, sortutako prototipoa aztertuko da azken hobekuntza batzuen beharra ebaluatzeko. Guzti hau, sistemak huts egingo ez duela bermatzen duten kalkuluetan oinarrituz egingo da. Azken diseinua sortzeko beharrezko neurriak zehaztuko dira.

Validation of plant dynamic model by online and laboratory measurements – a tool to predict online COD loads out of production of mechanical printing papers

COD discharges out of processes have increased in line with elevating brightness demands for mechanical pulp and papers. The share of lignin-like substances in COD discharges is on average 75%. In this thesis, a plant dynamic model was created and validated as a means to predict COD loading and discharges out of a mill. The assays were carried out in one paper mill integrate producing mechanical printing papers. The objective in the modeling of plant dynamics was to predict day averages of COD load and discharges out of mills. This means that online data, like 1) the level of large storage towers of pulp and white water 2) pulp dosages, 3) production rates and 4) internal white water flows and discharges were used to create transients into the balances of solids and white water, referred to as “plant dynamics”. A conversion coefficient was verified between TOC and COD. The conversion coefficient was used for predicting the flows from TOC to COD to the waste water treatment plant. The COD load was modeled with similar uncertainty as in reference TOC sampling. The water balance of waste water treatment was validated by the reference concentration of COD. The difference of COD predictions against references was within the same deviation of TOC-predictions. The modeled yield losses and retention values of TOC in pulping and bleaching processes and the modeled fixing of colloidal TOC to solids between the pulping plant and the aeration basin in the waste water treatment plant were similar to references presented in literature. The valid water balances of the waste water treatment plant and the reduction model of lignin-like substances produced a valid prediction of COD discharges out of the mill. A 30% increase in the release of lignin-like substances in the form of production problems was observed in pulping and bleaching processes. The same increase was observed in COD discharges out of waste water treatment. In the prediction of annual COD discharge, it was noticed that the reduction of lignin has a wide deviation from year to year and from one mill to another. This made it difficult to compare the parameters of COD discharges validated in plant dynamic simulation with another mill producing mechanical printing papers. However, a trend of moving from unbleached towards high-brightness TMP in COD discharges was valid.