Household waste recycling behavior: a market segmentation model

The potential of social marketing has been recognized in the United Kingdom by the Department for Environment, Food and Rural Affairs (DEFRA) as a useful tool for behavioral change for environmental problems. The techniques of social marketing have been used successfully by health organizations to tackle current public health issues. This article describes a research project which explored the current barriers to recycling household waste and the development of a segmentation model which could be used at the local level by authorities charged with waste collection and disposal. The research makes a unique contribution to social marketing through the introduction of a competencies framework and market segmentation for recycling behaviors.

Constitutive model for long term municipal solid waste mechanical behavior

This paper presents some improvements in the model proposed by Machado et al. [Machado SL, Carvalho MF, Vilar OM. Constitutive model for municipal solid waste. J Geotech Geoenviron Eng ASCE 2002; 128(11):940-51] now considering the influence of biodegradation of organic matter in the mechanical behavior of municipal solid waste. The original framework considers waste as composed of two component groups; fibers and organic paste. The particular laws of behavior are assessed for each component group and then coupled to represent waste behavior. The improvements introduced in this paper take into account the changes in the properties of fibers and mass loss due to organic matter depletion over time. Mass loss is indirectly calculated considering the MSW gas generation potential through a first order decay model. It is shown that as the biodegradation process occurs the proportion of fibers increases, however, they also undergo a degradation process which tends to reduce their ultimate tensile stress and Young modulus. The way these changes influence the behavior of MSW is incorporated in the final framework which captures the main features of the MSW stress-strain behavior under different loading conditions. (C) 2007 Elsevier Ltd. All rights reserved.

Physical-chemical and mineralogical characterization of fine aggregates from construction and demolition waste recycling plants

Construction and demolition waste (CDW) represents around 31% of all waste produced in the European Union. It is today acknowledged that the consumption of raw materials in the construction industry is a non-sustainable activity. It is thus necessary to reduce this consumption, and the volume of CDW dumped, by using this waste as a source of raw materials for the production of recycled aggregates. One potential use of these aggregates is their incorporation in reinforced concrete as a replacement of natural aggregates. A concrete that incorporates these aggregates and still performs well requires them to be fully characterized so that their behaviour within the concrete can be predicted. Coarse recycled aggregates have been studied quite thoroughly, because they are simpler to reintroduce in the market as a by-product, and so has the performance of concrete made with them. This paper describes the main results of research designed to characterize the physical and chemical properties of fine recycled aggregates for concrete production and their relationship with mineralogical composition and preprocessing. The constraints of the incorporation of fine aggregates in reinforced concrete are discussed. It is shown that, unless a developed processing diagram is used, this application is not feasible. (C) 2013 Elsevier Ltd. All rights reserved.

Sustainable waste recycling solution for the glass fibre reinforced polymer composite materials industry

In this paper the adequacy and the benefit of incorporating glass fibre reinforced polymer (GFRP) waste materials into polyester based mortars, as sand aggregates and filler replacements, are assessed. Different weight contents of mechanically recycled GFRP wastes with two particle size grades are included in the formulation of new materials. In all formulations, a polyester resin matrix was modified with a silane coupling agent in order to improve binder-aggregates interfaces. The added value of the recycling solution was assessed by means of both flexural and compressive strengths of GFRP admixed mortars with regard to those of the unmodified polymer mortars. Planning of experiments and data treatment were performed by means of full factorial design and through appropriate statistical tools based on analyses of variance (ANOVA). Results show that the partial replacement of sand aggregates by either type of GFRP recyclates improves the mechanical performance of resultant polymer mortars. In the case of trial formulations modified with the coarser waste mix, the best results are achieved with 8% waste weight content, while for fine waste based polymer mortars, 4% in weight of waste content leads to the higher increases on mechanical strengths. This study clearly identifies a promising waste management solution for GFRP waste materials by developing a cost-effective end-use application for the recyclates, thus contributing to a more sustainable fibre-reinforced polymer composites industry.

Mechanical performance of concrete made with aggregates from construction and demolition waste recycling plants

This research aims at analysing the mechanical performance of concrete with recycled aggregates (RA) from construction and demolition waste (CDW) from various locations in Portugal. First the characteristics of the various aggregates (natural and recycled) used in the production of concrete were thoroughly analysed. The composition of the RA was determined and several physical and chemical tests of the aggregates were performed. In order to evaluate the mechanical performance of concrete, compressive strength (in cubes and cylinders), splitting tensile strength, modulus of elasticity and abrasion resistance tests were performed. Concrete mixes with RA from CDW from several recycling plants were evaluated, in order to understand the influence that the RA's collection point, and consequently their composition, has on the characteristics of the mixes produced. The analysis of the mechanical performance allowed concluding that the use of RA worsens most of the properties tested, especially when fine RA are used. On the other hand, there was an increase in abrasion resistance when coarse RA were used. In global terms, the use of this type of aggregates, in limited contents, is viable from a mechanical viewpoint. (C) 2015 Elsevier Ltd. All rights reserved.

PET containers in Brazil: Opportunities and challenges of a logistics model for post-consumer waste recycling

The use of post-consumer materials is directly related to reducing the cost of production and extraction of natural resources. Non-recyclable materials are randomly disposed in the environment. Brazil is one of the largest consumers of PET (polyethylene terephthalate) bottles. The purpose of this paper is to describe the opportunities and challenges of the logistics model for post-consumer PET bottle recycling in Brazil, while providing knowledge of its practices along the recycling chain. The results describe the need to educate those directly and indirectly involved in the process: to reduce consumption in order to reduce the amount of waste generated: to structure the post-consumer reverse chain and engage industrial sectors and government, through public policies, to support cleaner technologies along the PET bottle production chain. (C) 2010 Elsevier B.V. All rights reserved.

Factors impacting the market share of Construction and Demolition (C&D) Waste recycling solutions

Current EU Directives force the Member States to assure by 2020 that 70% of the Construction and Demolition (C&D) waste is recovered instead of landfilled. While some countries have largely achieved this target, others still have a long way to go. For better understanding the differences arising from local disparities, six factors related to technical, economic, legislative and environmental aspects have been identified as crucial influences in the market share of C&D waste recycling solutions. These factors are able to identify the causes that limit the recycling rate of a certain region. Moreover, progress towards an efficient waste management can vary through the improvement of a single factor. This study provides the background for further fine-tuning the factors and their combination into a mathematical model for assessing the market share of C&D recycling solutions.

Solid waste recycling projects : a national directory /

"Solid waste management series (SW-45)."

Electrolytic cells for plastic waste recycling

The current project assesses potential molten alloy anodes for Solid Oxide Fuel Cells (SOFC) running on solid waste. A detailed phase diagram study was performed to locate probable anode systems. The molten metal oxide system PbO-Sb2O3 was selected as a possible molten alloy anode for this application. A detailed vapour pressure study of this system was performed. Several cells were fabricated to experimentally assess the electrochemical properties of this system. The work reveals several unexpected limiting features such as the incompatibility between the platinum and the chosen alloy. A second cell was built, this time using rhenium wires instead, preventing such reaction. However, the rhenium wire sublimes under oxidizing conditions (air) and the sealing glass and the chosen alloy system react with each other under long term use. Considering all these issues, a third cell design was conceived, surpassing some obstacles and providing some initial information regarding the electrochemical behaviour. The current project shows that many parameters need to be taken into account to ensure materials compatibility. For the PbOSb2O3 system, the high volatility of Sb2O3 was a serious limitation that can only be addressed through the application of new contact wires or sealing materials and conditions. Nonetheless, the project highlights several other potential systems that can be considered, such as Pb11Ge3O17, Pb3GeO5, Pb5Ge3O11, Bi2CuO4, Bi2PdO4, Bi12GeO20.

A importância da comunicação estratégica na alteração de comportamentos na sociedade : o caso Sociedade Ponto Verde

A comunicação estratégica poderá ser entendida como a comunicação alinhada com a estratégia global de uma organização para alcançar o seu posicionamento estratégico. Ou seja, para alcançar o sucesso, uma organização precisa de ter uma comunicação consistente com a sua identidade e, ao mesmo tempo, adequada ao seu público-alvo e ao tipo de sector onde se insere. Só desta forma consegue conquistar a confiança e fidelidade dos consumidores, essenciais para o alcance dos objectivos. Em relação à alteração comportamentos, é essencial que as empresas costruam uma estratégia de comunicação coerente e consistente, adaptando as mensagens e os públicos-alvo escolhidos. Neste âmbito da alteração de comportamentos, estudou-se neste trabalho a Sociedade Ponto Verde (SPV), uma associação portuguesa sem fins lucrativos, que actua no âmbito da gestão e reciclagem de resíduos de embalagens. Procurou estudar-se a evolução da sua comunicação ao longo dos anos e a forma como adaptou as suas mensagens, de forma a conseguir incutir na sociedade portuguesa a importância do comportamento de reciclagem de resíduos. Neste estudo, procedeu-se a uma análise individualizada de cada uma das campanhas de comunicação da SPV e, posteriormente, aplicou-se um inquérito por questionário, para verificar a eficácia das mesmas campanhas perante o público-alvo. A metodologia utilizada neste trabalho consistiu na distribuição de um inquérito por questionário online, que permitiu recolher uma amostra probabilística por conveniência. Em seguida, recolhidos e tratados os dados referentes às 482 respostas recebidas, utilizou-se o programa SPSS (Stastitical Package for the Social Sciences) para analisar, tratar e discutir os resultados obtidos. Estes resultados demonstraram que, de facto, não houve uma grande percentagem de inquiridos que se lembram das campanhas da SPV. Os resultados são positivos e não desmentem a qualidade e coerência das mensagens, mas a verdade é que a percentagem de indivíduos que não se lembra de algumas campanhas chega a ser elevada (em especial nas campanhas iniciais da organização, quando existia falta de uma estratégia coerente). Justifica-se este facto, em parte, pelo excesso de informação e estímulos a que as pessoas estão sujeitas, pelo que a informação que retêm não fica para sempre, acabando por dar lugar a outras informações. Os indivíduos são inconscientemente selectivos com a informação que processam e guardam, pois não seria possível guardar toda a informação que lhes é transmitida. No que diz respeito à comunicação estratégica que visa alterar uma atitude e, posteriormente, um comportamento, conclui-se que, no geral, o comportamento das pessoas inquiridas aparenta ter sido influenciado pela comunicação da SPV, caso contrário, as respostas afirmativas quanto à reciclagem e de concordância com algumas das afirmações teriam sido inferiores. Ou seja, mesmo reconhecendo o carácter um pouco enviesado da amostra (não deverá ser considerada representativa da população portuguesa), é possível dizer que a estratégia de comunicação da SPV (em especial a partir de 2005) foi eficiente. Palavras-

Optimal Solid Waste Policy with Centralized Recycling Opportunities

Economic models have demonstrated the efficiency of curbside collection taxes. This paper demonstrates that such efficiencies disappear in economies with centralized recycling options - where recyclable materials can be removed from the waste stream either by households or at a centralized recycling facility. In such economies a curbside garbage tax not only fails to encourage the centralized recycler to internalize the external costs of waste disposal, but introduces inefficiencies to the cost-minimizing mix of household and centralized recycling efforts. The optimal waste policy is a tax assessed further downstream at the landfill rather than at the curb.

The Costs of Municipal Curbside Recycling and Waste Collection

This paper estimates cost functions for both municipal solid waste collection and disposal services and curbside recycling programs. Cost data are obtained from a national survey of randomly selected municipalities. Results suggest, perhaps unsurprisingly, that both marginal and average costs of recycling systems exceed those of waste collection and disposal systems. Economies of scale are estimated for all observed quantities of waste collection and disposal. Economies of scale for recycling disappear at high levels of recycling - marginal and average cost curves for recycling take on the usual U-shape. Waste and recycling costs are also estimated as functions of factor costs and program attributes.