844 resultados para Vegetal oil
Resumo:
The objective of this study was to analyze the physicochemical properties and carotenoid levels of pequi oil obtained by different extraction methods and to evaluate the preservation of these properties and pigments during storage time. The pequi oil was obtained by solvent extraction, mechanical extraction, and hot water flotation. It was stored for over 180 days in an amber bottle at ambient conditions. Analyses for the determination of the acidity, peroxide, saponification and iodine values, coloration, total carotenoids, and β-carotene levels were conducted. The oil extraction with solvents produced the best yield and carotenoid levels. The oil obtained by mechanical extraction presented higher acidity (5.44 mg KOH.g-1) and peroxide values (1.07 mEq.kg-1). During the storage of pequi oil, there was an increase in the acidity and the peroxide values, darkening of the oil coloration, and a reduction of the carotenoid levels. Mechanical extraction is the less advantageous method for the conservation of the physicochemical properties and carotenoid levels in pequi oil.
Resumo:
Objetivou-se avaliar os rendimentos dos cortes e dos não-componentes das carcaças de cordeiros Santa Inês puros e ½ Dorset ½ Santa Inês, alimentados com dietas contendo diferentes fontes de óleo vegetal (óleo de soja, óleo de canola e óleo de linhaça) e uma dieta controle (sem adição de óleo vegetal). Após o abate, foram coletados sangue, pele, aparelho gastrintestinal cheio (esôfago + estômagos + intestinos delgado e grosso com seus conteúdos), aparelho gastrintestinal vazio (esôfago + estômagos + intestinos delgado e grosso, previamente esvaziados e limpos), aparelho reprodutor + bexiga, baço, fígado, coração, aparelho respiratório, rins com gordura perirrenal, cabeça, patas e cauda, que foram pesados para determinação do rendimento em relação ao peso vivo ao abate. Após resfriamento por 24 horas em câmara fria, pesou-se a carcaça e, posteriormente, dividiu-se longitudinalmente, sendo a metade esquerda seccionada em sete regiões anatômicas: perna, lombo, paleta, costelas flutuantes, costelas verdadeiras, baixos e pescoço. O estudo dos não-componentes da carcaça destacou a representabilidade dos pesos da pele (8,74%) e do conteúdo gastrintestinal (10,65%) na determinação do rendimento. As porcentagens dos cortes não apresentaram diferenças (p>0,05) em relação às dietas e grupos genéticos estudados.
Resumo:
Total spectrofluorimetry associated to Principal Components Analysis (PCA) were used to classify into different groups the samples of diesel oil, biodiesel, vegetal oil and residual oil, as well as, to identify addition of non-transesterified residual vegetable oil, instead of biodiesel, to the diesel oil. Using this method, the samples of diesel oil, mixtures of biodiesel in diesel and mixtures of residual oil in diesel were separated into well-defined groups.
Resumo:
Gerbera (Gerbera jamesonii) is one of the most popular ornamental plants in the world, used as cut or vase flower. The experiment aimed to evaluate the effect of milk in natura to control powdery mildew (Erysiphe cichoracearum) on gerbera. The treatments tested were: two concentrations of cow's milk in natura (8 and 16%), with and without adjuvant (vegetal oil), three fungicides (fenarimol -6 g a.i.100 L-1 H2O, chlorothalonil -150 g a.i.100 L-1 H2O and azoxystrobin + mineral oil - 10 g a.i.100 L-1 H2O) and control treatment. The area under the disease progress curve (AUDPC) was calculated for each plot based on disease severity. Milk in natura applied with adjuvant controlled the disease and did not allow the infection and development of pathogen. The addition of adjuvant improves the efficiency of milk in natura, but it requires subsequent washing of plants with H2O + detergent. The fungicide fenarimol promoted the best control and also the best gerbera visual aspect. The fungicide azoxystrobin + mineral oil and the chlorothalonil were phytotoxic to gerbera plants, affecting the aspect of leaves and flowers.
Resumo:
O objetivo do presente trabalho foi estudar a possibilidade da redução de dosagens de glyphosate (N-(fosfonometil)-glicina) em função de aumentos na quantidade de óleo vegetal e uréia adicionados como adjuvantes à calda. Além disso, avaliou-se o efeito desse herbicida aplicado isolado ou combinado com os adjuvantes, em três estádios de crescimento do capim-colonião. Os experimentos foram instalados nas entrelinhas de pomares de citros, variedade Pera Rio, do município de Barretos/SP, com altas infestações de capim-colonião, no ano de 1990. Testou-se o glyphosate isolado, na dosagem de 1,8 kg/ha de equivalente ácido (e.a.) e nas dosagens de 1,44, 1,08 e 0,72 kg/ha, adicionadas de 1,0, 2,0 e 3,0 l/ha de óleo vegetal e utilizou-se uma testemunha, tratada apenas com água. As plantas de capim-colonião mediam 1,5 m de altura. em outro experimento, o herbicida foi testado isoladamente na dosagem de 1,08 kg e.a./ha, e combinado com 2 l/ha de óleo vegetal ou 0,3% de uréia, sob os três estádios de crescimento do capim-colonião: a) 0,6m de altura e início do florescimento e frutificação; b) 1,5m de altura, florescimento e frutificação plenos; c) 0,5m de altura, na forma de rebrota da touceira após roçada da planta adulta, início de florescimento e frutificação. A adição de 2 l/ha de óleo vegetal na calda de pulverização, permitiu redução de 0,72 kg/ha do e.a. do glyphosate, sem prejuízos para o controle em relação a aplicação isolada na dosagem de 1,80 kg/ha. Nas mesmas condições, a adição de 0,2% de uréia proporcionou redução de 0,36 kg/ha do e.a. do herbicida. O controle sempre foi menor quando as plantas estavam mais velhas, o que pode ser resolvido com a aplicação dos produtos sobre a rebrota de tais plantas, após a roçada. A aplicação do herbicida, isolado ou com aditivos, no início do florescimento e frutificação das plantas, quer seja no seu desenvolvimento inicial ou após a brotação da soqueira, promoveu a inviabilização das sementes produzidas, diminuindo sensivelmente o número de dissemínulos viáveis no banco de sementes dessa espécie, presentes no solo.
Resumo:
A adição de óleos à calda de pulverização, muitas vezes, é utilizada a campo sem o adequado conhecimento sobre a absorção do produto fitossanitário pelo alvo, retenção de calda e até mesmo sobre a praga e a cultura. O objetivo do trabalho foi avaliar o efeito da adição de óleos ao acaricida cyhexatin sobre o ácaro Brevipalpus phoenicis e na retenção de calda por folhas de citros. Avaliou-se a mortalidade de ácaros, utilizando-se de frutos de laranja com uma arena circundada com cola entomológica para confinar os ácaros. Adotou-se o delineamento inteiramente casualizado, em esquema fatorial, constituído pelos fatores: duas formulações de cyhexatin (WG e SC), dois tipos de óleo (mineral e vegetal) e duas concentrações dos óleos (0,5 e 1,0%), e mais dois tratamentos adicionais (acaricidas não adicionados de óleo) e uma testemunha sem aplicação. A aplicação dos produtos foi realizada sobre frutos de laranja até além do ponto de escorrimento. Logo após a aplicação, transferiram-se 10 ácaros B. phoenicis para cada fruto.A contagem dos ácaros vivos, mortos e retidos na barreira adesiva foi realizada um dia após a aplicação. Para a determinação da quantidade de calda retida, utilizaram-se folhas de laranjeira, que foram pulverizadas até além do ponto de escorrimento, adotando-se os mesmos tratamentos e o delineamento estatístico mencionados para a avaliação da mortalidade de ácaros, com exceção da testemunha sem aplicação. Determinou-se a massa de líquido retido após a aplicação dos produtos por folha, com auxílio de balança de precisão. Verificou-se que um dia após a aplicação dos produtos, todos os tratamentos apresentaram mortalidade de B. phoenicis acima de 99%. Dessa forma, a adição de óleo, seja mineral, seja vegetal, ao acaricida cyhexatin não afetou a eficácia biológica deste acaricida nas formulações SC e WG. A maior fuga de B. phoenicis para a barreira de cola foi verificada nos tratamentos com adição de óleos, em comparação ao cyhexatin aplicado isoladamente. A adição de óleo, seja mineral, seja vegetal, ao cyhexatin na calda de pulverização reduziu a quantidade máxima de líquido retido pelas folhas de citros, podendo contribuir para a redução da quantidade de calda necessária para uma boa cobertura da planta.
Resumo:
Pectinolytic enzymes, or simply pectinases, are complex enzymes that degrade pectic polymers. They have many uses, such as fruit juice extraction and purification, textile fiber treatment and vegetal oil extraction. The aim of this work was to study the kinetics of pectinases production by solid-state fermentation, using dry cashew apple residue as substrate and the microorganism Aspergillus niger CCT 0916. The influence of the initial medium moisture and medium supplementation with a source of nitrogen and phosphorus was evaluated using the factorial experimental planning and response surface methodology. Ammonia sulphate and potassium phosphate were used as nitrogen and phosphorus source, respectively. The variables time of contact (T) and ratio volume solvent/fermented medium (RZ), in systems with and without agitation, were evaluated in order to study the best extraction condition of the produced enzyme. Washed and unwashed cashew apple residues were tested as the growth medium. The unwashed residue was obtained by drying the residue after the extraction of the juice, while the washed residue was obtained by water washing 5 times using the proportion of 1 kg pulp/2 liters of water. Samples were taken every 12 hours for moisture content, pH, protein, reducing sugars, polygalacturonase activity (PG) and viscosity reduction. The physical-chemical composition of the residues had different sugar and pectin levels. For the unwashed residue, the peak activity was reached with 40% of initial moisture content, 1% of nitrogen supplementation without phosphorus addition after 30 hours of process. These conditions led to 16 U/g of PG activity and 82% of viscosity reduction. The calculated models reached similar values to the experimental ones in the same process conditions: 15.55 U/g of PG and 79.57% of viscosity eduction. Similarly, the greatest enzyme production for washed residue was reached with 40% initial moisture content, 1% nitrogen supplementation without phosphorus addition after 22 hours of cultivation. In this condition it was obtained polygalacturonase activity of 9.84 U/g and viscosity reduction of 81.36%. These values are close to experimental values that were of 10.1 U/g and 81%, respectively. The conditions that led to the best PG activity results was the agitated one and the best extraction condition was obtained with 100 minutes of solvent/medium contact and RZ of 5 (mL/g)
Resumo:
Objective: The purpose of this study was to research a membrane material for use in guided bone regeneration. Study design: In this study, 25 male Wistar rats were used to analyze the biocompatibility and degradation process of biomembranes. The morphological changes in subcutaneous implantations were assessed after 7, 14, 21, 28 and 70 days. The materials were made of polyurethane polymer (AUG) obtained from vegetal oil (Ricinus communis) and polytetrafluoroethylene membrane (PTFE). The surface characteristics of the physical barriers in scanning electronic microscopic (SEM) were also evaluated. Results: In both groups, the initial histological analysis showed moderate inflammatory infiltrate, which was predominantly polymorphonuclear. There was also a presence of edema, which was gradually replaced by granulation tissue, culminating in a fibrous capsule. In the AUG group, some multinucleated giant cells were present in the contact interface, with the space previously occupied by the material. However, membrane degradation was not observed during the period studied. According to the present SEM findings, porosity was not detected in the AUG or PTFE membranes. Conclusion: The researched material is biocompatible and the degradation process is extremely slow or may not even occur at all.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
It was studied the effect of energy levels in the diet, obtained from vegetal oil inclusion, on the performance, diet cost per kilogram of broiler and fat content of the carcass, There were used 4,800 broiler chicks, 2,400 males and 2,400 females, and they were distributed in six treatment (energy levels in kcal ME/kg of diet) in three different phases: start diet from one to 20 days of age: A - 2930, B - 2980, C - 3030, D - 3080, E - 3130, F - 3180, growth diet from 21 to 40 days: A - 2980, B - 3030, C - 3050, D - 3130, E - 3150, F - 3230, finishing diet from 41 to 45 days of age: A - 3030, B - 3080, C - 3130,, D - 3180, E - 3230, F - 3280. The protein content was 22, 20 and 18% in each phase, respectively, There were evaluated the feed intake, energy intake, protein intake, weight gain, feed conversion mortality, diet cost per kg/bw. Sixty broilers were slaughtered, five males and five females per treatment, randomly chosen to determine the carcass composition considering the dry matter content, lipids content and protein content, total fat in carcass and fat per kilogram of broiler. The data were submitted to variance analysis and the means were compared using SNK. The broilers fed with medium and low levels of dietary energy showed the highest weight gain. At energy levels of the treatment D in the three phases, the lowest cost per kilogram of broiler was obtained. The females presented the highest fat content per kilogram of broiler produced.
Resumo:
The use of inks containing organic solvents by the offset printing process implies in the release of volatile organic compounds to the work environment. Many of these compounds such as benzene, toluene, ethylbenzene, and the xylene isomers (well known by the acronym BTEX) are extremely toxic. In this study, the BTEX concentrations were determined in two different printing plants that use distinct types of inks: the conventional and the so-called ecological, which is manufactured based on vegetal oil. Concentration ranges were 43-84, 15-3,480, 2-133, 5-459, and 2-236 μg m-3 for benzene, toluene, ethylbenzene, m + p-xylene, and o-xylene, respectively, for the conventional printing plant. At the ecological printing plant, concentration ranges were below limit of detection (
Resumo:
The drift is intimately linked to inappropriate use of pesticides and an important factor for reducing it, is the correct selection of spray nozzles and adjuvants. The objective of this work was to evaluate the drift potential in wind tunnel with different spray nozzles and different concentrations of adjuvants. The experiment was composed by six spray solutions (vegetable oil (in three concentrations), mineral oil, surfactant and reducing drift), which were applied with two nozzles, one pre-orifice flat fan (DG 8003 VS) and other with air induction (AI 8003 VS), totaling 12 treatments, with three repetitions. The equipment used was a wind tunnel, where the drift collections were made at different points. The treatments averages were compared using Confidence Interval at 5% probability. The analysis of the percentage of drift showed that the treatments had different behaviors. The nonylphenol ethoxylate adjuvant presented the highest drift when applied with the nozzle of pre-orifice and the lowest drift when applied with the air induction. The behavior of these nozzles when the oil-based adjuvant was used showed apposite results to those obtained for the surfactant. For the DG nozzles the lowest percentage of drift, at all analyzed distances, was observed to the treatment with vegetable oil (1.0%) and with the AI nozzles the lower drift was found for the treatment with nonylphenol ethoxylate (0.0625%), for the four distances in the collection. The result showed that both the spray nozzles and adjuvants alter directly the drift potential. There was no proportionately between the concentration of the oil-based adjuvant and the drift percentage.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)