Case study of the uniaxial anisotropic spin-1 bilinear-biquadratic Heisenberg model on a triangular lattice

We study the spin-1 model on a triangular lattice in the presence of a uniaxial anisotropy field using a cluster mean-field (CMF) approach. The interplay among antiferromagnetic exchange, lattice geometry, and anisotropy forces Gutzwiller mean-field approaches to fail in a certain region of the phase diagram. There, the CMF method yields two supersolid phases compatible with those present in the spin-1/2 XXZ model onto which the spin-1 system maps. Between these two supersolid phases, the three-sublattice order is broken and the results of the CMF approach depend heavily on the geometry and size of the cluster. We discuss the possible presence of a spin liquid in this region.

Antenas de microfita com patch em anel e múltiplas camadas dielétricas anisotrópicas uniaxiais

This work presents an analysis of the annular ring microstrip antennas printed on uniaxial anisotropic substrates and with superstrate.The analysis uses the full-wave formulation by means of the Hertz vector potentials method, in the Hankel transform domain. The definition of the Hertz vector potentials and the application of the appropriate boundary conditions to the structure allow determining the dyadic Green functions, relating the current densities in the conducting patch to the transforms of the tangential electric field components. Galerkin s method is then used to obtain the matrix equation whose nontrivial solution gives the complex resonant frequency of the antenna. From the modeling, it is possible to obtain results for the resonant frequency, bandwidth and quality factor, as a function of several parameters of the antenna, for different configurations. We have considered annular ring microstrip antennas on a single dielectric layer, antennas with two anisotropic dielectric layers, and annular ring microstrip antennas on suspended substrates. Numerical results for the resonant frequency of the these structures printed on isotropic substrates are also presented and compared with those published by other authors, showing a good agreement

Unfolding of plasmon-polariton modes in one-dimensional layered systems containing anisotropic left-handed materials

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Molecular dynamic simulations of elastomer structure and its influence on anisotropic stress under time-varying strain

We investigate the evolution of polymer structure and its influence on uniaxial anisotropic stress under time-varying uniaxial strain, and the role of external control variables such as temperature, strain rate, chain length, and density, using molecular dynamics simulation. At temperatures higher than glass transition, stress anisotropy in the system is reduced even though the bond stretch is greater at higher temperatures. There is a significant increase in the stress level with increasing density. At higher densities, the uncoiling of the chains is suppressed and the major contribution to the deformation is by internal deformation of the chains. At faster rates of loading stress anisotropy increases. The deformation mechanism is mostly due to bond stretch and bond bending rather than overall shape and size. Stress levels increase with longer chain length. There is a critical value of the functionality of the cross-linkers beyond which the uniaxial stress developed increases caused primarily by bond stretching due to increased constraint on the motion of the monomers. Stacking of the chains in the system also plays a dominant role in the behaviour in terms of excluded volume interactions. Low density, high temperature, low values of functionality of cross-linkers, and short chain length facilitate chain uncoiling and chain slipping in cross-linked polymers.

Design of anisotropic reflector with birefringent thin films

A novel design for dielectric anisotropic mirrors with birefringent thin films for normal incidence is presented. This mirror consists of a stack of quarter-wave biaxial layers. The biaxial anisotropic layers can be fabricated by oblique deposition. The reflectance is different for two linear polarizations of light incidence on the mirrors. As a numerical example, the design is carried out on glass with TiO2 and ZrO2. These thin films could be applied to anisotropic reflective devices for lasers.

Nonlinear scattering by anisotropic dielectric periodic structures

The combinatorial frequency generation by the periodic stacks of binary layers of anisotropic nonlinear dielectrics is examined. The products of nonlinear scattering are characterised in terms of the three-wave mixing processes. It is shown that the intensity of the scattered waves of combinatorial frequencies is strongly influenced by the constitutive and geometrical parameters of the anisotropic layers, and the frequency ratio and angles of incidence of pump waves. The enhanced efficiency of the frequency conversion at Wolf-Bragg resonances has been demonstrated for the lossless and lossy-layered structures. © 2012 O. V. Shramkova and A. G. Schuchinsky.

Análise de superfícies seletivas de freqüência através do método dos potenciais vetorias de Hertz

This work presents a theoretical and numerical analysis of Frequency Selective Surfaces (FSS) with elements as rectangular patch, thin dipole and crossed dipole mounted on uniaxial anisotropic dielectric substrate layers for orientations of the optical axis along x, y and z directions. The analysis of these structures is accomplished by combination of the Hertz vector potentials method and the Galerkin's technique, in the Fourier transform-domain, using entire¬domain basis functions. This study consists in the use of one more technique for analysis of FSS on anisotropic dielectric substrate. And presents as the main contribution the introduction of one more project parameter to determinate the transmission and reflection characteristics of periodic structures, from the use of anisotropic dielectric with orientations of the crystal optical axis along x, y and z directions. To validate this analysis, the numerical results of this work are compared to those obtained by other authors, for FSS structures on anisotropic and isotropic dielectric substrates. Also are compared experimental results and the numerical correspondent ones for the FSS isotropic case. The technique proposed in this work is accurate and efficient. ln a second moment, curves are presented for the transmission and reflection characteristics of the FSS structures using conducting patch elements mounted on uniaxial anisotropic dielectric substrate layers with optical axis oriented along x, y and z directions. From analysis of these curves, the performance of the considered FSS structures as function of the optical axis orientation is described

Análise de antenas de microfita com patches circulares sobre substratos anisotrópicos usando o método dos potenciais de Hertz

This work consists on the theoretical and numerical analysis of some properties of circular microstrip patch antennas on isotropic and uniaxial anisotropic substrates. For this purpose, a full wave analysis is performed, using Hertz Vector Potentials method in the Hankel Transform domain. In the numerical analysis, the moment method is also used in order to determine some characteristics of the antenna, such as: resonant frequency and radiation pattern. The definition of Hertz potentials in the Hankel domain is used in association with Maxwell´s equations and the boundary conditions of the structures to obtain the Green´s functions, relating the components of the current density on the patch and the tangential electric field components. Then, the Galerkin method is used to generate a matrix equation whose nontrivial solution is the complex resonant frequency of the structure. In the analysis, a microstrip antenna with only one isotropic dielectric layer is initially considered. For this structure, the effect of using superconductor patches is also analyzed. An analysis of a circular microstrip antenna on an uniaxial anisotropic dielectric layer is performed, using the Hertz vector potentials oriented along the optical axis of the material, that is perpendicular to the microstrip ground plane. Afterwards, the circular microstrip antenna using two uniaxial anisotropic dielectric layers is investigated, considering the particular case in which the inferior layer is filled by air. In this study, numerical results for resonant frequency and radiation pattern for circular microstrip antennas on isotropic and uniaxial anisotropic substrates are presented and compared with measured and calculated results found in the literature

Analysis of electromagnetic propagation in birefringent thin film

In general, the propagating behavior of extraordinary wave in anisotropic materials is different from that in isotropic materials. With the tangential continuity of Maxwell's equations, the electromagnetic propagating behaviors have been investigated at the incident and exit interfaces of the uniaxial anisotropic thin film. The emphasis was placed on two interesting optical phenomena such as homolateral refraction behavior and wide-angle Brewster's phenomenon, which occurred at the interfaces of uniaxial anisotropic thin film.

Boundary conditions in the simplest model of linear and second harmonic magneto-optical effects

This paper is concerned with linear and nonlinear magneto- optical effects in multilayered magnetic systems when treated by the simplest phenomenological model that allows their response to be represented in terms of electric polarization, The problem is addressed by formulating a set of boundary conditions at infinitely thin interfaces, taking into account the existence of surface polarizations. Essential details are given that describe how the formalism of distributions (generalized functions) allows these conditions to be derived directly from the differential form of Maxwell's equations. Using the same formalism we show the origin of alternative boundary conditions that exist in the literature. The boundary value problem for the wave equation is formulated, with an emphasis on the analysis of second harmonic magneto-optical effects in ferromagnetically ordered multilayers. An associated problem of conventions in setting up relationships between the nonlinear surface polarization and the fundamental electric field at the interfaces separating anisotropic layers through surface susceptibility tensors is discussed. A problem of self- consistency of the model is highlighted, relating to the existence of resealing procedures connecting the different conventions. The linear approximation with respect to magnetization is pursued, allowing rotational anisotropy of magneto-optical effects to be easily analyzed owing to the invariance of the corresponding polar and axial tensors under ordinary point groups. Required representations of the tensors are given for the groups infinitym, 4mm, mm2, and 3m, With regard to centrosymmetric multilayers, nonlinear volume polarization is also considered. A concise expression is given for its magnetic part, governed by an axial fifth-rank susceptibility tensor being invariant under the Curie group infinityinfinitym.

Espalhamento elástico em meios anisotrópicos estratificados

A análise de AVO constitui-se, atualmente, numa importante ferramenta para a extração de informações litológicas a partir de dados sísmicos, através do uso dos contrastes de impedância acústica nas interfaces que separam diferentes litologias. A hipótese usual de isotropia deixa de valer, em muitos casos, após o advento de arranjos de grande afastamento e geofones com multi-superfície. Para a interpretação destes dados, a análise de AVO deve incluir anisotropia. Este trabalho apresenta uma teoria de AVO e resultados numéricos para um meio anisotrópico estratificado. Esta tese contém três contribuições. Inicialmente, é apresentada uma nova abordagem para o estudo da reflexão-transmissão através de interface plana que separam dois meios anisotrópicos com pelo menos um plano horizontal de simetria especular. As equações de Zoeppritz são generalizadas para incluir anisotropia, através da introdução das chamadas matrizes de impedância, o que simplifica bastante o formalismo anterior. Posteriormente, é descrito o estudo da reflexão de ondas P através de interface entre um meio isotrópico e outro transversalmente isotrópico (TI). É mostrado que a reflexão de ondas P, neste tipo de experimento, não fornece informações sobre a presença de anisotropia do semi-espaço TI, pelo menos em incidência pré-crítica. Finalmente, é discutido o comportamento da reflexão e transmissão de pulsos, em incidência pós-crítica, através de meios anisotrópicos estratificados. Observa-se que o comportamento pós-crítico dos pulsos espalhados carregam valiosa informações sobre a anisotropia dos meios atravessados por eles.

Modelagem sísmica e inversão na presença de anisotropia

A necessidade da adoção de modelos elásticos anisotrópicos, no contexto da sísmica de exploração, vem crescendo com o advento de novas técnicas de aquisição de dados como VSP, walkway VSP, tomografia poço a poço e levantamentos sísmicos com grande afastamento. Meios anisotrópicos, no contexto da sísmica de exploração, são modelos efetivos para explicar a propagação de ondas através de meios que apresentam padrões de heterogeneidade em escala muito menor que o comprimento de onda das ondas sísmicas. Particularmente, estes modelos são muito úteis para explicar o dado sísmico mais robusto que são as medidas de tempo de trânsito. Neste trabalho, são investigados aspectos da propagação de ondas, traçado de raios e inversão de tempos de trânsito em meios anisotrópicos. É estudada a propagação de ondas SH em meios anisotrópicos estratificados na situação mais geral onde estas ondas podem ocorrer, ou seja, em meios monoclínicos com um plano vertical de simetria especular. É mostrado que o campo de ondas SH refletido a partir de um semi-espaço estratificado, não apresenta qualquer informação sobre a possível presença de anisotropia em subsuperfície. São apresentados métodos simples e eficientes para o traçado de raios em 3D através de meios anisotrópicos estratificados, baseados no princípio de Fermat. Estes métodos constituem o primeiro passo para o desenvolvimento de algoritmos de inversão de tempos de trânsito para meios anisotrópicos em 3D, a partir de dados de VSP e walkaway VSP. Esta abordagem é promissora para determinação de modelos de velocidade, que são necessários para migração de dados sísmicos 3D na presença de anisotropia. É efetuada a análise da inversão tomográfica não linear, para meios estratificados transversalmente isotrópicos com um eixo de simetria vertical(TIV). As limitações dos dados de tempo de trânsito de eventos qP para determinação das constantes elásticas, são estabelecidas e caracterizados os efeitos da falta de cobertura angular completa na inversão tomográfica. Um algoritmo de inversão foi desenvolvido e avaliado em dados sintéticos. A aplicação do algoritmo a dados reais demonstra a consistência de meios TIV. Esta abordagem é útil para casos onde há informação a priori sobre a estratificação quase plana das formações e onde os próprios dados do levantamento poço a poço apresentam um alto grau de simetria especular em relação a um plano vertical. Também pode ser útil em interpretações preliminares, onde a estimativa de um meio estratificado, serve como modelo de fundo para se efetuar análises mais detalhadas, por exemplo, como um modelo de velocidades anisotrópico para migração, ou como um modelo de calibração para análises de AVO.

Velocity structure and seismic anisotropy in the crust and upper mantle from Receiver Function analysis: three case studies in Italy

The research for this PhD project consisted in the application of the RFs analysis technique to different data-sets of teleseismic events recorded at temporary and permanent stations located in three distinct study regions: Colli Albani area, Northern Apennines and Southern Apennines. We found some velocity models to interpret the structures in these regions, which possess very different geologic and tectonics characteristics and therefore offer interesting case study to face. In the Colli Albani some of the features evidenced in the RFs are shared by all the analyzed stations: the Moho is almost flat and is located at about 23 km depth, and the presence of a relatively shallow limestone layer is a stable feature; contrariwise there are features which vary from station to station, indicating local complexities. Three seismic stations, close to the central part of the former volcanic edifice, display relevant anisotropic signatures­­­ with symmetry axes consistent with the emplacement of the magmatic chamber. Two further anisotropic layers are present at greater depth, in the lower crust and the upper mantle, respectively, with symmetry axes directions related to the evolution of the volcano complex. In Northern Apennines we defined the isotropic structure of the area, finding the depth of the Tyrrhenian (almost 25 km and flat) and Adriatic (40 km and dipping underneath the Apennines crests) Mohos. We determined a zone in which the two Mohos overlap, and identified an anisotropic body in between, involved in the subduction and going down with the Adiratic Moho. We interpreted the downgoing anisotropic layer as generated by post-subduction delamination of the top-slab layer, probably made of metamorphosed crustal rocks caught in the subduction channel and buoyantly rising toward the surface. In the Southern Apennines, we found the Moho depth for 16 seismic stations, and highlighted the presence of an anisotropic layer underneath each station, at about 15-20 km below the whole study area. The moho displays a dome-like geometry, as it is shallow (29 km) in the central part of the study area, whereas it deepens peripherally (down to 45 km); the symmetry axes of anisotropic layer, interpreted as a layer separating the upper and the lower crust, show a moho-related pattern, indicated by the foliation of the layer which is parallel to the Moho trend. Moreover, due to the exceptional seismic event occurred on April 6th next to L’Aquila town, we determined the Vs model for two station located next to the epicenter. An extremely high velocity body is found underneath AQU station at 4-10 km depth, reaching Vs of about 4 km/s, while this body is lacking underneath FAGN station. We compared the presence of this body with other recent works and found an anti-correlation between the high Vs body, the max slip patches and earthquakes distribution. The nature of this body is speculative since such high velocities are consistent with deep crust or upper mantle, but can be interpreted as a as high strength barrier of which the high Vs is a typical connotation.

Haces no uniformemente polarizados para medidas polarimétricas de medios homogéneos y transparentes

En este trabajo se propone el uso de diversos tipos de haces no-uniformemente y totalmente polarizados en medidas polarimétricas de muestras homogéneas y transparentes. Como ejemplos concretos de este tipo de haces se proponen los haces espiralmente polarizados y haces a la salida de medios uniáxicos anisótropos con el eje óptico en la dirección de propagación. Dichos haces se representan mediante modelos analíticos sencillos, teniendo en cuenta el carácter vectorial de los mismos, los cuales permiten conocer el campo en cualquier plano en propagación libre y a través de medios o sistemas que pueden ser descritos mediante matrices de Müller. Mediante el uso de haces nouniformemente y totalmente polarizados se simplifica notablemente el proceso de medida, siendo suficientes una o dos medidas según el haz utilizado, para la obtención de todos los elementos de la matriz de Müller de la muestra. ABSTRACT. In this work the use of non-uniformly and totally polarized fields in polarimetric measurements of homogeneous and transparent samples is proposed. As particular examples of this kind of fields, spirally polarized fields and fields at the output of uniaxial anisotropic media, with its optics axis along the propagation direction, are considered. Such fields are represented by simple analytical models, taking the vectorial nature of light into account. By means of these models, the fields at any plane upon free propagation or after passing through media or systems described by Müller matrices, can be calculated. By using non-uniformly and totally polarized fields the measurement procedure is significantly simplified. Depending on the field to be used only one or two measurements are required for obtaining all the elements of the Müller matrix of the sample.

Reflexión y refracción de la luz en medios anisótropos

En este proyecto se pretende estudiar el comportamiento de la luz al atravesar medios de diversos materiales, tanto isótropos como anisótropos uniáxicos. Para ello se requiere realizar un estudio previo de las condiciones de contorno aplicables a las ecuaciones de Maxwell en la interfase de dos medios que pueden ser isótropos o anisótropos. En el caso de dos materiales isótropos, la solución del problema son los conocidos coeficientes de Fresnel de reflexión y transmisión. En este trabajo se pretende generalizar el estudio al caso del paso de la luz desde un medio isótropo a otro anisótropo uniáxico (con su eje óptico en orientación arbitraria) y viceversa y al caso de dos materiales anisótropos uniáxicos con ejes ópticos en orientaciones arbitrarias. Es de especial interés el caso de un mismo material uniáxico en el que las dos partes tienen el eje óptico con distinta orientación. Una vez planteadas las condiciones de contorno específicas en cada caso, se obtendrá un conjunto de ecuaciones algebraicas cuya resolución permitirá obtener los coeficientes de reflexión y transmisión buscados. Para plantear el sistema de ecuaciones adecuado, será necesario tener una descripción de las características ópticas de los materiales empleados, la orientación de los ejes ópticos en cada caso, y los posibles ángulos de incidencia. Se realizará un tratamiento matricial de modo que el paquete MatLab permite su inversión de manera inmediata. Se desarrollará una interfaz sencilla, realizada con MatLab, que permita al usuario introducir sin dificultad los datos correspondientes a los materiales de los medios incidente y transmitido, la orientación en espacial del o de los ejes ópticos, de la longitud de onda de trabajo y del ángulo de incidencia del haz de luz, con los que la aplicación realizará los cálculos. Los coeficientes de reflexión y refracción obtenidos serán representados gráficamente en función del ángulo de incidencia. Así mismo se representarán los ángulos transmitidos y reflejados en función del de incidencia. Todo ello de esta forma, que resulte sencilla la interpretación de los datos por parte del usuario. ABSTRACT. The reason for this project is to study the behavior of light when light crosses different media of different materials, isotropic materials and uniaxial anisotropic materials. For this, a previous study is necessary where the boundary conditions apply to Maxwell equations at the interface between two media which can be isotropic and anisotropic. If both materials are isotropic, the Fresnel ccoefficients of reflection and refraction are used to solve the problem. The aim of this work is to generalize a study when light crosses from an isotropic media to a uniaxial anisotropic media, where its axis have arbitrary directions, and vicecersa. The system consisting of two materials with axis in arbitrary directions are also being studied. Once the specific boundary conditions are known in each case, a set of algebraic equations are obtained whose solution allows obtaining the reflection coefficients and refraction coefficients. It is necessary to have a description of the optical characteristics of the materials used; of the directions axis in each case and the possible angle of incidence. A matrix is proposed for later treatment in Matlab that allows the immediate inversion. A simple interface will de developed, manufactured with Matlab, that allows the user to enter data easily corresponding to the incident media and transmission media of the different materials, the special axis directions, the wavelength and the angle of incidence of the light beam. This data is used by the application to perform the necessary calculations to solve the problem. When reflection coefficients and refraction coefficients are obtained, the application draws the graphics in function of the angle of incidence. Also transmitted and reflected angles depending on the incidence are represented. This is to perform a data representation which is a simple interpretation of the user data.