Comparative analysis of MPPT techniques for PV applications

This paper presents a careful evaluation among the most usual MPPT techniques, doing meaningful comparisons with respect to the amount of energy extracted from the photovoltaic (PV) panel, PV voltage ripple, dynamic response and use of sensors, considering that the models are first implemented via MatLab/Simulink®, and after a digitally controlled boost DC-DC converter was implemented and connected to an Agilent Solar Array simulator in order to verify the simulation results. The prototype was built, the algorithms are digitally developed and the main experimental results are also presented, including dynamic responses and the experimental tracking factor (TF) for the analyzed MPPT techniques. © 2011 IEEE.

Main maximum power point tracking strategies intended for photovoltaics

This paper presents evaluations among the most usual MPPT techniques, doing meaningful comparisons with respect to the amount of energy extracted from the photovoltaic panel (PV) (Tracking Factor - TF) in relation to the available power, PV voltage ripple, dynamic response and use of sensors. Using MatLab/Simulink® and DSpace platforms, a digitally controlled boost DC-DC converter was implemented and connected to an Agilent Solar Array E4350B simulator in order to verify the analytical procedures. The main experimental results are presented and a contribution in the implementation of the IC algorithm is performed and called IC based on PI. Moreover, the dynamic response and the tracking factor are also evaluated using a Friendly User Interface, which is capable of online program power curves and compute the TF. Finally, a typical daily insulation is used in order to verify the experimental results for the main PV MPPT methods. © 2011 IEEE.

Evaluation of the main MPPT techniques for photovoltaic applications

This paper presents evaluations among the most usual maximum power point tracking (MPPT) techniques, doing meaningful comparisons with respect to the amount of energy extracted from the photovoltaic (PV) panel [tracking factor (TF)] in relation to the available power, PV voltage ripple, dynamic response, and use of sensors. Using MatLab/Simulink and dSPACE platforms, a digitally controlled boost dc-dc converter was implemented and connected to an Agilent Solar Array E4350B simulator in order to verify the analytical procedures. The main experimental results are presented for conventional MPPT algorithms and improved MPPT algorithms named IC based on proportional-integral (PI) and perturb and observe based on PI. Moreover, the dynamic response and the TF are also evaluated using a user-friendly interface, which is capable of online program power profiles and computes the TF. Finally, a typical daily insulation is used in order to verify the experimental results for the main PV MPPT methods. © 2012 IEEE.

A comparative study of MPPT strategies and a novel singlephase integrated buck-boost inverter for small wind energy conversion systems

This paper presents the analysis of some usual MPPT (Maximum Power Point Tracking) strategies intended for small wind energy conversion (up to 1kW) based on permanent magnet synchronous generators (PMSG), considering the stand-alone application for a novel buck-boost integrated inverter. Each MPPT method is analytically introduced and then it is simulated using MatLab/Simulink considering standard conditions of wind and also commercially available turbines and generators. The extracted power in each case is compared with the maximum available power, so the tracking factor is calculated for each method. Thus, the focus is on the application to improve the efficiency of stand-alone wind energy conversion systems (WECS) with battery chargers and AC load supplied by inverter. Therefore, for this purpose a novel single phase buck-boost integrated inverter is introduced. Finally, the main experimental results for the introduced inverter are presented. © 2011 IEEE.

Queensland’s high risk foot database : tracking the length and width of Queensland’s foot ulcers

Background Foot ulcers are a leading cause of avoidable hospital admissions and lower extremity amputations. However, large clinical studies describing foot ulcer presentations in the ambulatory setting are limited. The aim of this descriptive observational paper is to report the characteristics of ambulatory foot ulcer patients managed across 13 of 17 Queensland Health & Hospital Services. Methods Data on all foot ulcer patients registered with a Queensland High Risk Foot Form (QHRFF) was collected at their first consult in 2012. Data is automatically extracted from each QHRFF into a Queensland high risk foot database. Descriptive statistics display age, sex, ulcer types and co-morbidities. Statewide clinical indicators of foot ulcer management are also reported. Results Overall, 2,034 people presented with a foot ulcer in 2012. Mean age was 63(±14) years and 67.8% were male. Co-morbidities included 85% had diabetes, 49.7% hypertension, 39.2% dyslipidaemia, 25.6% cardiovascular disease, 13.7% kidney disease and 12.2% smoking. Foot ulcer types included 51.6% neuropathic, 17.8% neuro-ischaemic, 7.2% ischaemic, 6.6% post-surgical and 16.8% other; whilst 31% were infected. Clinical indicator results revealed 98% had their wound categorised, 51% received non-removable offloading, median ulcer healing time was 6-weeks and 37% had ulcer recurrence. Conclusion This paper details the largest foot ulcer database reported in Australia. People presenting with foot ulcers appear predominantly older, male with several co-morbidities. Encouragingly it appears most patients are receiving best practice care. These results may be a factor in the significant reduction of Queensland diabetes foot-related hospitalisations and amputations recently reported.

A hybrid maximum power point tracking for partially shaded photovoltaic systems in the tropics

Partial shading and rapidly changing irradiance conditions significantly impact on the performance of photovoltaic (PV) systems. These impacts are particularly severe in tropical regions where the climatic conditions result in very large and rapid changes in irradiance. In this paper, a hybrid maximum power point (MPP) tracking (MPPT) technique for PV systems operating under partially shaded conditions witapid irradiance change is proposed. It combines a conventional MPPT and an artificial neural network (ANN)-based MPPT. A low cost method is proposed to predict the global MPP region when expensive irradiance sensors are not available or are not justifiable for cost reasons. It samples the operating point on the stairs of I–V curve and uses a combination of the measured current value at each stair to predict the global MPP region. The conventional MPPT is then used to search within the classified region to get the global MPP. The effectiveness of the proposed MPPT is demonstrated using both simulations and an experimental setup. Experimental comparisons with four existing MPPTs are performed. The results show that the proposed MPPT produces more energy than the other techniques and can effectively track the global MPP with a fast tracking speed under various shading patterns.

Incidence factors of the tracking systems used in parabolic-cylindrical concentrators

Several orientation and tracking systems employed in parabolic-cylindrical concentrators for focusing the direct solar radiation on the absorber tubes are analyzed from the technical and economic points of view. Case one, where the incidence factor was a function of declination and hour angle, showed that the maximum variations of incident factor from morning to noon was 0.5 at zero angle of declination. Case two, where the incidence factor was a function of declination, hour angle and latitude, showed the maximum variation of the incidence factor to be 0.128, which occurred during noon at the latitude of 30 degrees, corresponding to a change of declination from 0 to 23.5 degrees. In case three, the incidence factor, a function of declination only, showed that the maximum variation of the incidence factor corresponding to the change in declination from 0 to 23.5 degree was 0.0758. It is concluded that system three is the most efficient from the technical and economic point of view.

A Hybrid Parallel Algorithm for Computing and Tracking Level Set Topology

The contour tree is a topological abstraction of a scalar field that captures evolution in level set connectivity. It is an effective representation for visual exploration and analysis of scientific data. We describe a work-efficient, output sensitive, and scalable parallel algorithm for computing the contour tree of a scalar field defined on a domain that is represented using either an unstructured mesh or a structured grid. A hybrid implementation of the algorithm using the GPU and multi-core CPU can compute the contour tree of an input containing 16 million vertices in less than ten seconds with a speedup factor of upto 13. Experiments based on an implementation in a multi-core CPU environment show near-linear speedup for large data sets.

Use of telemetric tracking to examine environmental influences on catch/effort indices. A case study of Atlantic Salmon (Salmo salar L.)in the R. Tywi, S. Wales

A case study of Atlantic Salmon runs into the R. Tyvi (S. Wales) is presented. Radio tracking of over 200 salmon in 1988 and 1989 has demonstrated that flow is an important factor in modifying both run timing and migratory success. Entry of salmon into the river is typically in response to flow events, and periods of low falling flows delay entry and may directly result in reduced runs into the river. Delayed entry may also increase the proportion of the run migrating after the end of both rod and net fishing seasons. The implications of these results for net and rod catch and catch/effort data are discussed, using both statutory reported catch data and data from specific catch/effort studies. Flow is demonstrated to be a dominant factor in determining the within-season distribution of rod catch and catch/effort during low-flow years. Estuarial seine net catch and catch/effort tend to be controlled more by time of return than by flow although low flows may delay runs. Annual reported rod catch is correlated with flow, which controls in season availability, catchability and consequently the amount of fishing effort. Use of catch or catch/effort data should take account of inter-year variations in flow and other environmental factors. Although catch and catch/effort are valuable indicators of fishery performance, they are inadequate to represent changing stock levels.

Active Hidden Models for Tracking with Kernel Projections

We introduce Active Hidden Models (AHM) that utilize kernel methods traditionally associated with classification. We use AHMs to track deformable objects in video sequences by leveraging kernel projections. We introduce the "subset projection" method which improves the efficiency of our tracking approach by a factor of ten. We successfully tested our method on facial tracking with extreme head movements (including full 180-degree head rotation), facial expressions, and deformable objects. Given a kernel and a set of training observations, we derive unbiased estimates of the accuracy of the AHM tracker. Kernels are generally used in classification methods to make training data linearly separable. We prove that the optimal (minimum variance) tracking kernels are those that make the training observations linearly dependent.

3D Trajectory Recovery for Tracking Multiple Objects and Trajectory Guided Recognition of Actions

A mechanism is proposed that integrates low-level (image processing), mid-level (recursive 3D trajectory estimation), and high-level (action recognition) processes. It is assumed that the system observes multiple moving objects via a single, uncalibrated video camera. A novel extended Kalman filter formulation is used in estimating the relative 3D motion trajectories up to a scale factor. The recursive estimation process provides a prediction and error measure that is exploited in higher-level stages of action recognition. Conversely, higher-level mechanisms provide feedback that allows the system to reliably segment and maintain the tracking of moving objects before, during, and after occlusion. The 3D trajectory, occlusion, and segmentation information are utilized in extracting stabilized views of the moving object. Trajectory-guided recognition (TGR) is proposed as a new and efficient method for adaptive classification of action. The TGR approach is demonstrated using "motion history images" that are then recognized via a mixture of Gaussian classifier. The system was tested in recognizing various dynamic human outdoor activities; e.g., running, walking, roller blading, and cycling. Experiments with synthetic data sets are used to evaluate stability of the trajectory estimator with respect to noise.

Trajectory Guided Tracking and Recognition of Actions

A combined 2D, 3D approach is presented that allows for robust tracking of moving people and recognition of actions. It is assumed that the system observes multiple moving objects via a single, uncalibrated video camera. Low-level features are often insufficient for detection, segmentation, and tracking of non-rigid moving objects. Therefore, an improved mechanism is proposed that integrates low-level (image processing), mid-level (recursive 3D trajectory estimation), and high-level (action recognition) processes. A novel extended Kalman filter formulation is used in estimating the relative 3D motion trajectories up to a scale factor. The recursive estimation process provides a prediction and error measure that is exploited in higher-level stages of action recognition. Conversely, higher-level mechanisms provide feedback that allows the system to reliably segment and maintain the tracking of moving objects before, during, and after occlusion. The 3D trajectory, occlusion, and segmentation information are utilized in extracting stabilized views of the moving object that are then used as input to action recognition modules. Trajectory-guided recognition (TGR) is proposed as a new and efficient method for adaptive classification of action. The TGR approach is demonstrated using "motion history images" that are then recognized via a mixture-of-Gaussians classifier. The system was tested in recognizing various dynamic human outdoor activities: running, walking, roller blading, and cycling. Experiments with real and synthetic data sets are used to evaluate stability of the trajectory estimator with respect to noise.

Tracking the Links to Social Functioning: Asperger Syndrome and Gaze Patterns

The application of Eye Tracking (ET) to the study of social functioning in Asperger Syndrome (AS) provides a unique perspective into social attention and cognition in this atypical neurodevelopmental group. Research in this area has shown how ET can capture social attention atypicalities within this group, such as diminished fixations to the eye region when viewing still images and movie clips; increased fixation to the mouth region; reduced face gaze. Issues exist, however, within the literature, where the type (static/dynamic) and the content (ecological validity) of stimuli used appear to affect the nature of the gaze patterns reported. Objectives: Our research aims were: using the same group of adolescents with AS, to compare their viewing patterns to age and IQ matched typically developing (TD) adolescents using stimuli considered to represent a hierarchy of ecological validity, building from static facial images; through a non-verbal movie clip; through verbal footage from real-life conversation; to eye tracking during real-life conversation. Methods: Eleven participants with AS were compared to 11 TD adolescents, matched for age and IQ. In Study 1, participants were shown 2 sets of static facial images (emotion faces, still images taken from the dynamic clips). In Study 2, three dynamic clips were presented (1 non-verbal movie clip, 2 verbal footage from real-life conversation). Study 3 was an exploratory study of eye tracking during a real-life conversation. Eye movements were recorded via a HiSpeeed (240Hz) SMI eye tracker fitted with chin and forehead rests. Various methods of analysis were used, including a paradigm for temporal analysis of the eye movement data. Results: Results from these studies confirmed that the atypical nature of social attention in AS was successfully captured by this paradigm. While results differed across stimulus sets,
collectively they demonstrated how individuals with AS failed to focus on the most socially relevant aspects of the various stimuli presented. There was also evidence that the eye movements of the AS group were atypically affected by the presence of motion and verbal information. Discriminant Function Analysis demonstrated that the ecological validity of stimuli was an important factor in identifying atypicalities associated with AS, with more accurate classifications of AS and TD groups occurring for more naturalistic stimuli (dynamic rather than static). Graphical analysis of temporal sequences of eye movements revealed the atypical manner in which AS participants followed interactions within the dynamic stimuli. Taken together with data on the order of gaze patterns, more subtle atypicalities were detected in the gaze behaviour of AS individuals towards more socially pertinent regions of the dynamic stimuli. Conclusions: These results have potentially important implications for our understanding of deficits in Asperger Syndrome, as they show that, with more naturalistic stimuli, subtle differences in social attention can be detected that

Modulation Insensitive PLL for Tracking Antenna Applications

This article shows practical results of a self-tracking receiving antenna array using a new phase locked loop (PLL) tracking configuration. The PLL configuration differs from other architectures, as it has the new feature of being able to directly track phase modulated signals without requiring an additional unmodulated pilot carrier to be present. The PLLs are used within the antenna array to produce a constant phase intermediate frequency (IF) for each antenna element. These IF's can then be combined in phase, regardless of the angle of arrival of the signal, thus utilizing the antennas array factor. The article's main focus is on the phase jitter performance of the modulation insensitive PLL carrier recovery when tracking phase modulated signals of low signal to noise ratio. From this analysis, it is concluded that the new architecture, when optimally designed, can produce phase jitter performance close to that of a conventional tracking PLL.

Essays on Applications of the Factor Model

Thesis (Ph.D.)--University of Washington, 2013