Multiuser virtual safety training system for tower crane dismantlement

Tower crane dismantling is one of the most dangerous activities in the construction industry. Tower crane erection and dismantlement causes 10–12% of the fatalities of all crane accidents. The nature of the task is such that off-the-job training is not practicable, and the knowledge and expertise needed has to be gained on the job. However, virtual trainers such as Microsoft Flight Simulator for airplane pilots and mission rehearsal exercise (MRE) for army personnel have been developed and are known to provide a highly successful means of overcoming the risks involved in such on-the-job learning and clearly have potential in construction situations. This paper describes the newly developed multiuser virtual safety training system (MVSTS) aimed at providing a similar learning environment for those involved in tower crane dismantlement. The proposed training system is developed by modifying an existing game engine. Within the close-to-reality virtual environment, trainees can participate in a virtual dismantling process. During the process, they learn the correct dismantling procedure and working location and to cooperate with other trainees by virtually dismantling the crane. The system allows the trainees to experience the complete procedure in a risk-free environment. A case study is provided to demonstrate how the system works and its practical application. The proposed system was evaluated by interviews with 30 construction experts with different backgrounds, divided into three groups according to their experience and trained by the traditional and virtual methods, respectively. The results indicate that the trainees of the proposed system generally learned better than those using the traditional method. The ratings also indicate that the system generally has great potential as a training platform.

Optimizing construction planning schedules by virtual prototyping enabled resource analysis

The inherent uncertainty and complexity of construction work make construction planning a particularly difficult task for project managers due to the need to anticipate and visualize likely future events. Conventional computer-assisted technology can help but is often limited to the constructability issues involved. Virtual prototyping, however, offers an improved method through the visualization of construction activities by computer simulation — enabling a range of ‘what-if’ questions to be asked and their implications on the total project to be investigated. This paper describes the use of virtual prototyping to optimize construction planning schedules by analyzing resource allocation and planning with integrated construction models, resource models, construction planning schedules and site-layout plans. A real-life case study is presented that demonstrates the use of a virtual prototyping enabled resource analysis to reallocate space, logistic on access road and arrange tower cranes to achieve a 6-day floor construction cycle.

Integrating real time positioning systems to improve blind lifting and loading crane operations

Mobile/tower cranes are the most essential forms of construction plant in use in the construction industry but are also the subject of several safety issues. Of these, blind lifting has been found to be one of the most hazardous of crane operations. To improve the situation, a real-time monitoring system that integrates the use of a Global Positioning System (GPS) and Radio Frequency Identification (RFID) is developed. This system aims to identify unauthorized work or entrance of personnel within a pre-defined risk zone by obtaining positioning data of both site workers and the crane. The system alerts to the presence of unauthorized workers within a risk zone——currently defined as 3m from the crane. When this happens, the system suspends the power of the crane and a warning signal is generated to the safety management team. In this way the system assists the safety management team to manage the safety of hundreds of workers simultaneously. An onsite trial with debriefing interviews is presented to illustrate and validate the system in use.

Análise estática de um guindaste de torre, utilizando o método dos elementos finitos

The finite element method is of great importance for the development and analysis of a new product being designed or already on the market, and that requires some specific request or special application. The tower crane, being an essential equipment for modern construction to increase productivity and safety on construction sites, is required for many types of special applications day after day, in many kinds of work. Paying attention to this growing need for handling special projects for the tower crane, faced with the importance and necessity of development and improvement of knowledge in more accurate and practical calculation methods such as the finite element method , for greater agility and precision in the response to a new project. The tower crane is defined by the maximum load moment that it can act with a certain amount of load. The tower crane which will be analyzed in this work , for example, is a tower crane with a resulting capacity of 85 Metric Tons which are considered basic dimensions data of a fisical tower crane of a crane company Liebherr in Guaratinguetá . Thus, the project analysis will begin with the threedimensional representation of the crane lines with AutoCAD software , conversion of this model to the format accepted ANSYS Workbench and completion of 3D modeling of structural components in Design module ANSYS software. After structural modeling is completed, the simulation is performed in static simulation of ANSYS Workbench software mode. The standards will be adopted to DIN (Deutsches Institut für Normung) and EN 14439 (Europäische Normung 14439) and some NR 's related to specific security class of tower cranes, which will be referred throughout the work

Análisis técnico y financiero de las máquinas de elevación

Los nombres que se usan actualmente para las grúas los ponen las empresas fabricantes y muy frecuentemente no tienen relación con su tipología ni con su capacidad. Por otra parte, es de uso común en la construcción, llamar a las grúas usando su tonelaje nominal que coincide normalmente con su capacidad máxima que se obtiene a radio mínimo. Existe una controversia por el uso de este valor ya que no suele definir bien la capacidad de las maquinas. En cuanto el radio de trabajo se aleja de sus valores mínimos, las grúas están limitadas por el momento de vuelco que no tiene porque comportarse de manera proporcional o ni siquiera relacionada con el valor de la capacidad nominal. Esto hace que comparar grúas mediante sus capacidades nominales (que son sus denominaciones) pueda inducir a errores importantes. Como alternativa, se pretende estudiar el uso de momento máximo de vuelco MLM por sus siglas en ingles (Maximum Load Moment) para intentar definir la capacidad real de las grúas. Se procede a realizar un análisis técnico y financiero de grúas con respecto a ambos valores mencionados con objeto de poder determinar cual de los dos parámetros es más fiable a la hora de definir la capacidad real de estas maquinas. Para ello, se seleccionan dentro de las tres tipologías más importantes por su presencia e importancia en la construcción (grúas de celosía sobre cadenas, grúas telescópicas sobre camión y grúas torre) nueve grúas de distintos tamaños y capacidades con objeto de analizar una serie de parámetros técnicos y sus costes. Se realizan de este modo diversas comparativas analizando los resultados en función de las tipologías y de los tamaños de las distintas maquinas. Para cada máquina se obtienen las capacidades y los momentos de vuelco correspondientes a distintos radios de trabajo. Asimismo, se obtiene el MLM y el coste hora de cada grúa, este último como suma de la amortización de la máquina, intereses del capital invertido, consumos, mantenimiento y coste del operador. Los resultados muestran las claras deficiencias del tonelaje nominal como valor de referencia para definir la capacidad de las grúas ya que grúas con el mismo tonelaje nominal pueden dar valores de capacidad de tres a uno (e incluso mayores) cuando los radios de trabajo son importantes. A raiz de este análisis se propone el uso del MLM en lugar del tonelaje nominal para la denominación de las grúas ya que es un parámetro mucho más fiable. Siendo conscientes de la dificultad que supone un cambio de esta entidad al tratarse de un uso común a nivel mundial, se indican posibles actuaciones concretas que puedan ir avanzando en esa dirección como seria por ejemplo la nomenclatura oficial de los fabricantes usando el MLM dentro del nombre de la grúa que también podría incluir la tipología o al menos alguna actuación legislativa sencilla como obligar al fabricante a indicar este valor en las tablas y características de cada máquina. El ratio analizado Coste horario de la grúa / MLM resulta ser de gran interés y permite llegar a la conclusión que en todas las tipologías de grúas, la eficiencia del coste por hora y por la capacidad (dada por el MLM) aumenta al aumentar la capacidad de la grúa. Cuando los tamaños de cada tipología se reducen, esta eficiencia disminuye y en algunos casos incluso drasticamente. La tendencia del mundo de la construcción de prefabricación y modularización que conlleva pesos y dimensiones de cargas cada vez más grandes, demandan cada vez grúas de mayor capacidad y se podría pensar en un primer momento que ante un crecimiento de capacidades tan significativo, el coste de las grúas se podría disparar y por ello disminuir la eficiencia de estas máquinas. A la vista de los resultados obtenidos con este análisis, no solo no ocurre este problema sino que se observa que dicho aumento de tamaños y capacidades de grúas redunda en un aumento de su eficiencia en cualquiera de las tipologías de estas maquinas que han sido estudiadas. The crane names that are actually used are given by crane manufacturers and, very frequently, they do not have any relationship with the crane type nor with its capacity. On the other hand, it is common in construction to use the nominal capacity (which corresponds in general to the capacity at minimum radius) as crane name. The use of this figure is controversial since it does not really reflect the real crane capacity. When the working radius increases a certain amount from its minimum values, the crane capacity starts to be limited by the crane tipping load and the moment is not really related to the value of the nominal capacity. Therefore, comparing cranes by their nominal capacity (their names) can lead to important mistakes. As an alternative, the use of the maximum load moment (MLM) can be studied for a better definition of real crane capacity. A technical and financial analysis of cranes is conducted using both parameters to determine which one is more reliable in order to define crane’s real capacity. For this purpose, nine cranes with different sizes and capacities will be selected within the most relevant crane types (crawler lattice boom cranes, telescopic truck mounted cranes and tower cranes) in order to analyze several parameters. The technical and economic results will be compared according to the crane types and sizes of the machines. For each machine, capacities and load moments are obtained for several working radius as well as MLM and hourly costs of cranes. Hourly cost is calculated adding up depreciation, interests of invested capital, consumables, maintenance and operator’s cost. The results show clear limitations for the use of nominal capacity as a reference value for crane definition since cranes with the same nominal capacity can have capacity differences of 3 to 1 (or even bigger) when working on important radius. From this analysis, the use of MLM as crane name instead of nominal capacity is proposed since it is a much more reliable figure. Being aware of the difficulty of such change since nominal capacity is commonly used worldwide; specific actions are suggested to progress in that direction. One good example would be that manufacturers would include MLM in their official crane names which could also include the type as well. Even legal action can be taken by simply requiring to state this figure in the crane charts and characteristics of every machine. The analyzed ratio: hourly cost / MLM is really interesting since it leads to the conclusion that for all crane types, the efficiency of the hourly cost divided by capacity (given by MLM) increases when the crane capacity is higher. When crane sizes are smaller, this efficiency is lower and can fall dramatically in certain cases. The developments in the construction world regarding prefabrication and modularization mean bigger weights and dimensions, which create a demand for bigger crane capacities. On a first approach, it could be thought that crane costs could rise significantly because of this capacity hugh increase reducing in this way crane efficiency. From the results obtained here, it is clear that it is definitely not the case but the capacity increase of cranes will end up in higher efficiency levels for all crane types that have been studied.

Cranes, claims and a statutory right of user

In larger developments there is potential for construction cranes to encroach into the airspace of neighbouring properties. To resolve issues of this nature, a statutory right of user may be sought under s 180 of the Property Law Act 1974 (Qld). Section 180 allows the court to impose a statutory right of user on servient land where it is reasonably necessary in the interests of effective use in any reasonable manner of the dominant land. Such an order will not be made unless the court is satisfied that it is consistent with public interest, the owner of the servient land can be adequately recompensed for any loss or disadvantage which may be suffered from the imposition and the owner of the servient land has refused unreasonably to agree to accept the imposition of that obligation. In applying the statutory provision, a key practical concern for legal advisers will be the basis for assessment of compensation. A recent decision of the Queensland Supreme Court (Douglas J) provides guidance concerning matters relevant to this assessment. The decision is Lang Parade Pty Ltd v Peluso [2005] QSC 112.

Dublin Docklands Development Authority architectural concept competition for a landmark tower/U2 studio

The U2 Tower competition entry involved the architectural design for a landmark office tower with associated head office for the world acclaimed rock band U2. The selected site for the office tower was located on the banks of the river Liffey, Dublin. The tower design was intended as a signifier or gateway to the docklands and the city itself. The proposed design incorporated a podium level for music retail and a media centre, a concourse level including cafeteria and outdoor areas as well as a commercial tower.

The subtropical residential tower: An investigation by Design Charrette

QUT's Centre for Subtropical Design (CSD) partnered with a major developer to bring together some of Brisbane’s most experienced and creative architects and designers in a two-day intensive design charrette to propose innovative design strategies for naturally-ventilated high rise residential buildings. An inner-urban renewal site in Queensland’s capital city Brisbane gave four multi-disciplinary teams the opportunity to address a raft of issues that developers and consultants will confront more and more in the future in warm humid climates. The quest to release apartment dwellers from dependence on energy-hungry air-conditioning and artificial lighting was central to the design brief for the towers. Mentored by Richard Hassell of WOHA, the creative teams focussed on climate-responsive design principles for passive climate control including orientation, cross-ventilation and outdoor living in order to reduce greenhouse gas emissions and offset occupants’ rising energy costs. This article discusses how outcomes of the charrette take their cue from the city’s subtropical climate and demonstrate how high-density high-rise living can be attractive, affordable and sustainable through positive engagement with the subtropical climate’s natural attributes.

The use of virtual prototyping to rehearse the sequence of construction work involving mobile cranes

Purpose – Rehearsing practical site operations is without doubt one of the most effective methods for minimising planning mistakes, because of the learning that takes place during the rehearsal activity. However, real rehearsal is not a practical solution for on-site construction activities, as it not only involves a considerable amount of cost but can also have adverse environmental implications. One approach to overcoming this is by the use of virtual rehearsals. The purpose of this paper is to investigate an approach to simulation of the motion of cranes in order to test the feasibility of associated construction sequencing and generate construction schedules for review and visualisation. Design/methodology/approach – The paper describes a system involving two technologies, virtual prototyping (VP) and four-dimensional (4D) simulation, to assist construction planners in testing the sequence of construction activities when mobile cranes are involved. The system consists of five modules, comprising input, database, equipment, process and output, and is capable of detecting potential collisions. A real-world trial is described in which the system was tested and validated. Findings – Feedback from the planners involved in the trial indicated that they found the system to be useful in its present form and that they would welcome its further development into a fully automated platform for validating construction sequencing decisions. Research limitations/implications – The tool has the potential to provide a cost-effective means of improving construction planning. However, it is limited at present to the specific case of crane movement under special consideration. Originality/value – This paper presents a large-scale, real life case of applying VP technology in planning construction processes and activities.

Shouting from the ivory tower : a marketing approach to improve communication of academic research to entrepreneurs

Evidence-based practice in entrepreneurship requires effective communication of research findings. We focus on how research synopses can “promote” research to entrepreneurs. Drawing on marketing communications literature, we examine how message characteristics of research synopses affect their appeal. We demonstrate the utility of conjoint analysis in this context and find message length, media richness and source credibility to have positive influences. We find mixed support for a hypothesized negative influence of jargon, and for our predictions that participants’ involvement with academic research moderates these effects. Exploratory analyses reveal latent classes of entrepreneurs with differing preferences, particularly for message length and jargon.

Experience has no shadow : Bell tower III

I created Experience Has No Shadow (2010) following a successful Ausdance Qld choreographic grant in 2010, which comprised of two solos and a video-dance at the Performance Space at the Judith Wright Centre. The aim of the Bell Tower III residency was to research and construct a Stage One Development that explored choreographic approaches to oral histories. Like many first generation Australians, oral histories are the way memories and experiences of distant homelands often offer the only connection to cultural origins. Consequently, I drew on auto-ethnographic references in the form of family stories – specifically those of my mother’s family - told and retold by my mother and her family as East German refugees during World War II. While working on the video, I explored a way to make a direct connection to the past stories by using a recording of my mother’s voice. She is re-telling a favourite story about Salamo the circus horse that was sold to my great grandfather as a work horse. Rather than representing the text literally, I attempted to capture the intensity of the storytelling which accompanied abstract footage of Avril Huddy filmed through perspex glass producing animal-like shapes that continually blur and morph in and out of focus. Strangely, by tying the story in with the filmed images a whole new story seems to emerge. Two distinct solos were created in collaboration with the performers, Expressions Dance Company’s Elise May and QUT’s Avril Huddy. These were performed at the Judith Wright Centre for Contemporary Arts, Performance Space, 1st April, 2010. The simplicity of its design became a key concept behind the work in terms of sets, spacing requirements, and costumes – almost minimalist. The choreographic process was conceived as highly collaborative, with commissioned music (and eventually lighting features) to act as equal partners in the performance.

Functional MRI BOLD response to Tower of London performance of first-episode schizophrenia patients using cortical pattern matching

Due to its three-dimensional folding pattern, the human neocortex; poses a challenge for accurate co-registration of grouped functional; brain imaging data. The present study addressed this problem by; employing three-dimensional continuum-mechanical image-warping; techniques to derive average anatomical representations for coregistration; of functional magnetic resonance brain imaging data; obtained from 10 male first-episode schizophrenia patients and 10 age-matched; male healthy volunteers while they performed a version of the; Tower of London task. This novel technique produced an equivalent; representation of blood oxygenation level dependent (BOLD) response; across hemispheres, cortical regions, and groups, respectively, when; compared to intensity average co-registration, using a deformable; Brodmann area atlas as anatomical reference. Somewhat closer; association of Brodmann area boundaries with primary visual and; auditory areas was evident using the gyral pattern average model.; Statistically-thresholded BOLD cluster data confirmed predominantly; bilateral prefrontal and parietal, right frontal and dorsolateral; prefrontal, and left occipital activation in healthy subjects, while; patients’ hemispheric dominance pattern was diminished or reversed,; particularly decreasing cortical BOLD response with increasing task; difficulty in the right superior temporal gyrus. Reduced regional gray; matter thickness correlated with reduced left-hemispheric prefrontal/; frontal and bilateral parietal BOLD activation in patients. This is the; first study demonstrating that reduction of regional gray matter in; first-episode schizophrenia patients is associated with impaired brain; function when performing the Tower of London task, and supports; previous findings of impaired executive attention and working memory; in schizophrenia.