Por uma moradia termicamente confortável: proposta de habitação de interesse social com ênfase no conforto térmico

This research covers the topic of social housing and its relation to thermal comfort, so applied to an architectural and urban intervention in land situated in central urban area of Macaíba/RN, Brazil. Reflecting on the role of design and use of alternative building materials in the search for better performance is one of its main goals. The hypothesis is that by changing design parameters and choice of materials, it is possible to achieve better thermal performance results. Thus, we performed computer simulations of thermal performance and natural ventilation using computational fluid dynamics or CFD (Computational Fluid Dynamics). The presentation of the thermal simulation followed the methodology proposed in the dissertation Negreiros (2010), which aims to find the percentage of the amount of hours of comfort obtained throughout the year, while data analysis was made of natural ventilation from images generated by the images extracted from the CFD. From model building designed, was fitted an analytical framework that results in a comparison between three different proposals for dwellings housing model, which is evaluated the question of the thermal performance of buildings, and also deals with the spatial variables design, construction materials and costs. It is concluded that the final report confirmed the general hypotheses set at the start of the study, it was possible to quantify the results and identify the importance of design and construction materials are equivalent, and that, if combined, lead to gains in thermal performance potential.

Comportamento do pedestre e ambiente térmico urbano

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Por uma moradia termicamente confortável: proposta de habitação de interesse social com ênfase no conforto térmico

This research covers the topic of social housing and its relation to thermal comfort, so applied to an architectural and urban intervention in land situated in central urban area of Macaíba/RN, Brazil. Reflecting on the role of design and use of alternative building materials in the search for better performance is one of its main goals. The hypothesis is that by changing design parameters and choice of materials, it is possible to achieve better thermal performance results. Thus, we performed computer simulations of thermal performance and natural ventilation using computational fluid dynamics or CFD (Computational Fluid Dynamics). The presentation of the thermal simulation followed the methodology proposed in the dissertation Negreiros (2010), which aims to find the percentage of the amount of hours of comfort obtained throughout the year, while data analysis was made of natural ventilation from images generated by the images extracted from the CFD. From model building designed, was fitted an analytical framework that results in a comparison between three different proposals for dwellings housing model, which is evaluated the question of the thermal performance of buildings, and also deals with the spatial variables design, construction materials and costs. It is concluded that the final report confirmed the general hypotheses set at the start of the study, it was possible to quantify the results and identify the importance of design and construction materials are equivalent, and that, if combined, lead to gains in thermal performance potential.

Por uma moradia termicamente confortável: proposta de habitação de interesse social com ênfase no conforto térmico

This research covers the topic of social housing and its relation to thermal comfort, so applied to an architectural and urban intervention in land situated in central urban area of Macaíba/RN, Brazil. Reflecting on the role of design and use of alternative building materials in the search for better performance is one of its main goals. The hypothesis is that by changing design parameters and choice of materials, it is possible to achieve better thermal performance results. Thus, we performed computer simulations of thermal performance and natural ventilation using computational fluid dynamics or CFD (Computational Fluid Dynamics). The presentation of the thermal simulation followed the methodology proposed in the dissertation Negreiros (2010), which aims to find the percentage of the amount of hours of comfort obtained throughout the year, while data analysis was made of natural ventilation from images generated by the images extracted from the CFD. From model building designed, was fitted an analytical framework that results in a comparison between three different proposals for dwellings housing model, which is evaluated the question of the thermal performance of buildings, and also deals with the spatial variables design, construction materials and costs. It is concluded that the final report confirmed the general hypotheses set at the start of the study, it was possible to quantify the results and identify the importance of design and construction materials are equivalent, and that, if combined, lead to gains in thermal performance potential.

Avaliação clínica da sensibilidade pós-operatória em restaurações oclusais com 3 sistemas adesivos: 3 passos (Scotchbond MP Plus), 2 passos associado a dessensibilizante (Gluma Confort Bond + Dessensitizer) e de 1 passo-auto-condicionante simplificado (I Bond)

O objetivo desse estudo foi analisar clinicamente o comportamento de 60 restaurações oclusais, em relação à sensibilidade pós-operatória em cavidades oclusais em pré-molares e molares. Foram selecionados dentes considerados dentro da normalidade, após testes clínicos e radiográficos, onde cavidades de média profundidade e largura máxima de ½ da distancia entre os vértices de cúspides na área do istmo, eram requeridas. A profundidade da parede pulpar foi estabelecida em dentina pelo menos 1 mm além da junção amelodentinária. Os detalhes do preparo foram registrados por fotografia (digitalizadas), por moldagem com silicone de condensação, modelos de gesso. Esses cuidados foram tomados para que futuramente servissem como auxiliar de interpretação de resultados. As restaurações foram feitas sob isolamento absoluto, para evitarmos contaminação pela saliva e sangue. Em 20 preparos foram feitos procedimentos restauradores com sistema de 3 passos (Scotchbond MP Plus). Em outros 20 preparos foram feitos procedimentos restauradores com sistema de 2 passos associado a dessensibilizantes (Gluma Confort Bond + Dessensitizer). Em outros 20 preparos foram feitos procedimentos restauradores com sistema de 1 passo autocondicionante simplificado (I Bond). Os 60 dentes foram restaurados com a resina composta Filtek Supreme, por ser um material apropriado para dentes posteriores, por meio da técnica incremental. Após 48 horas e 7 dias os pacientes retornavam para o controle da sensibilidade pós-operatória. Inicialmente era obtido um relato do paciente, para em seguida serem realizados testes clínicos (térmico, pressão e percussão). Os dados foram tabelados e os resultados analisados. Não houve diferença na sensibilidade antes e após (48 horas e 7 dias) a colocação das restaurações para todos os grupos.

Temperaturas de confort e implicaciones energéticas en viviendas climatizadas mecánicamente. Estudio en clima cálido y húmedo

Este trabajo presenta un estudio de campo sobre confort térmico basado en la concepción adaptativa, para la determinación de las temperaturas y rangos de confort térmico de sujetos habituados a espacios enfriados mecánicamente en viviendas con aire acondicionado (AA) en el clima cálido y húmedo de la ciudad de Maracaibo (Venezuela) y las consecuentes implicaciones energéticas que tiene la satisfacción de esa demanda de confortabilidad en el sector residencial de la ciudad. Para la estimación de la temperatura de confort (Tc) y el rango de temperaturas de confort se aplican diferentes metodologías de análisis estadístico, las cuales son comparadas con las respectivas calculadas con el índice PMV; se analizan también otros aspectos asociados a la confortabilidad térmica, tales como las respuestas en las diferentes escalas de valoración de la confortabilidad, las preferencias, experiencias y expectativas térmicas de los sujetos. Las implicaciones energéticas se determinan en base al consumo de la energía eléctrica residencial debido exclusivamente a la variación de la Tc, entre la obtenida inicialmente en espacios naturalmente ventilados (NV) en Maracaibo (Bravo y Gonzalez 2001a) y la determinada ahora en espacios con AA. Para ello, se utiliza una metodología que es el resultado de la modificación parcial de la propuesta por Yamtraipat et al (2006). Entre los resultados y conclusiones derivadas de este estudio se encuentra que el 57 % de las personas prefieren las mismas condiciones confortables experimentadas en los ambientes con AA y solamente un 30 % prefieren experimentar ambientes ligeramente fríos y ligeramente calientes. Mientras tanto, las estimaciones de la Tc, y el respectivo rango, varían de acuerdo a la metodología empleada. Con la convencional metodología adaptativa, la Tc se estima en 25 °C en un amplio rango de 6 °C, entre 22 °C y 28 °C; mientras que con la metodología denominada “método de los promedios de los intervalos de las sensaciones térmicas” (Gómez-Azpeitia et al, 2007), la misma Tc se estima en 24 °C, en un rango estrecho de 22,5 °C a 25,5 °C y en un rango ampliado de 21 °C a 27 °C (amplitud 6 °C), donde se encuentran las tres cuartas partes de las personas del estudio. Ambas Tc son muy próximas a la temperatura operativa optima de 24,5 °C (rango de 23 °C a 26 °C) establecida por las normas internacionales ISO 7730:1994 y ASHRAE 55:1992 para el verano en climas templados. Sin embargo, la Tc estimada con los valores de PMV resulta ser superior en 1 °C y 2 °C a la Tc estimada con la metodología adaptativa (25 °C) y con el metodo de los promedios de los intervalos (24 °C), respectivamente. Con la metodología aplicada y la muestra del estudio se estima que de haberse registrado una Tbsint igual o próxima a 28 C (equivalente a la Tc en espacios NV en Maracaibo) en todos los espacios medidos (con Tbsint entre 19 C y 29 C), el ahorro total de la energía anual seria de 1.648,1 GWh en un ano respecto al consumo de AA en el año 2007 (2.522,3 GWh en un ano), mientras que el ahorro de energía asumiendo Tbsint de 24 C y de 25 C, resultan en 651,9 GWh en un ano y 425,7 GWh en un ano, respectivamente. Esto significa respectivos consumos adiciones de energía eléctrica equivalentes al 60,4 % y 74,2 %. Finalmente, los hábitos o conductas adoptadas por las personas de este estudio, sumado a las predominantes manifestaciones de confortabilidad en ambientes enfriados mecánicamente, redundan en mayores adaptaciones a condiciones de frio y exigencias de temperaturas de confort más bajas, con su consecuente consumo energético para proveerlas. ABSTRACT This investigation presents a study on thermal comfort following the adaptive approach for the determination of the thermal comfort temperatures and ranges of subjects accustomed to mechanically refrigerated spaces in dwellings with air conditioning (AA) systems in the hot and humid weather of the city of Maracaibo (Venezuela) and the ensuing energy use implications it has on the satisfaction of such demand of comfortability in the residential sector of the city. For the estimation of the comfort temperature (Tc) and the range of comfort temperatures different statistical analysis methodologies were used, which are then compared to the respective values calculated with the PMV index, also discusses other aspects related with thermal comfortability were analyzed, such as the responses on the different scales of perception of thermal comfortability, preferences, experiences and expectations of the analyzed subjects. The energetic implications are determined through the residential energy consumption related exclusively with the variation of the Tc between the originally calculated for naturally ventilated (NV) spaces in Maracaibo (Bravo y Gonzalez 2001a) and the one calculated on the present study with AA. For this, a new methodology was developed by partially modifying the Yamtraipat et al (2006) proposal. Among the results and conclusions of this study are that 57 % of the studied subjects prefer the same comfortable conditions experienced on AA environments and only a 30 % prefer to experience slightly cooler or warmer environments. Also, estimations of the Tc and its respective range vary according to the used methodology. With the conventional adaptive methodology, the Tc is estimated in 25 °C with a wide range of 6 °C, between 22 °C and 28 °C, while using the “thermal sensation intervals averages method” (Gomez-Azpeitia et al, 2007) the Tc is estimated in 24 °C on a narrow range between 22.5 °C and 25.5 °C and a widened range of 21 °C to 27 °C (6 °C in amplitude), a range where . of the studied subjects are located. Both Tc are very close to the optimum operation temperature of 24.5 °C (with a range between 23 °C and 26 °C) established on the ISO 7730:1994 and ASHRAE 55:1992 international norms for the summer on warm climates. However, the estimated Tc with the PMV indexes results to be 1 °C and 2 °C above the Tc estimated with the adaptive methodology (25 °C) and the thermal sensation intervals averages method (24 °C), respectively. With the applied methodology and this study sample, its estimated that if a Tbsint equal or close to 28 °C (equivalent to the Tc in NV spaces in Maracaibo) was registered in all measured spaces (with Tbsint between 19 °C and 29 °C) the total yearly energy savings would be of 1.648,1 GWh in a year with respect to the AA consumption in the year 2007 (2.522.3 GWh in a year), while the energy savings assuming a Tbinst of 24 °C and 25 °C result in 651.9 GWh and 425.7 Gwh in a year, respectively. This means that the respective additional electrical energy consumption amount to 60.4 % and 74.2 %, respectively. Finally, the habits or behaviors adopted by the subjects analyzed on this study, added to the predominant manifestations of comfortability in mechanically refrigerated environments result in greater adaptations to colder conditions and lower thermal comfort temperature demands, with the consequential increase in power consumption to meet them.

Yellowing And Bleaching Of Grey Hair Caused By Photo And Thermal Degradation.

Yellowing is an undesirable phenomenon that is common in people with white and grey hair. Because white hair has no melanin, the pigment responsible for hair colour, the effects of photodegradation are more visible in this type of hair. The origin of yellowing and its relation to photodegradation processes are not properly established, and many questions remain open in this field. In this work, the photodegradation of grey hair was investigated as a function of the wavelength of incident radiation, and its ultrastructure was determined, always comparing the results obtained for the white and black fibres present in grey hair with the results of white wool. The results presented herein indicate that the photobehaviour of grey hair irradiated with a mercury lamp or with solar radiation is dependent on the wavelength range of the incident radiation and on the initial shade of yellow in the sample. Two types of grey hair were used: (1) blended grey hair (more yellow) and (2) grey hair from a single-donor (less yellow). After exposure to a full-spectrum mercury lamp for 200 h, the blended white hair turned less yellow (the yellow-blue difference, Db(*) becomes negative, Db(*)=-6), whereas the white hair from the single-donor turned slightly yellower (Db(*)=2). In contrast, VIS+IR irradiation resulted in bleaching in both types of hair, whereas a thermal treatment (at 81 °C) caused yellowing of both types of hair, resulting in a Db(*)=3 for blended white hair and Db(*)=9 for single-donor hair. The identity of the yellow chromophores was investigated by UV-Vis spectroscopy. The results obtained with this technique were contradictory, however, and it was not possible to obtain a simple correlation between the sample shade of yellow and the absorption spectra. In addition, the results are discussed in terms of the morphology differences between the pigmented and non-pigmented parts of grey hair, the yellowing and bleaching effects of grey hair, and the occurrence of dark-follow reactions.

Draft Genome Sequence Of Ft9, A Novel Bacillus Cereus Strain Isolated From A Brazilian Thermal Spring.

A Bacillus cereus strain, FT9, isolated from a hot spring in the midwest region of Brazil, had its entire genome sequenced.

Compact Ag@fe3o4 Core-shell Nanoparticles By Means Of Single-step Thermal Decomposition Reaction.

A temperature pause introduced in a simple single-step thermal decomposition of iron, with the presence of silver seeds formed in the same reaction mixture, gives rise to novel compact heterostructures: brick-like Ag@Fe3O4 core-shell nanoparticles. This novel method is relatively easy to implement, and could contribute to overcome the challenge of obtaining a multifunctional heteroparticle in which a noble metal is surrounded by magnetite. Structural analyses of the samples show 4 nm silver nanoparticles wrapped within compact cubic external structures of Fe oxide, with curious rectangular shape. The magnetic properties indicate a near superparamagnetic like behavior with a weak hysteresis at room temperature. The value of the anisotropy involved makes these particles candidates to potential applications in nanomedicine.

Graded Meshes In Bio-thermal Problems With Transmission-line Modeling Method.

In this study, the transmission-line modeling (TLM) applied to bio-thermal problems was improved by incorporating several novel computational techniques, which include application of graded meshes which resulted in 9 times faster in computational time and uses only a fraction (16%) of the computational resources used by regular meshes in analyzing heat flow through heterogeneous media. Graded meshes, unlike regular meshes, allow heat sources to be modeled in all segments of the mesh. A new boundary condition that considers thermal properties and thus resulting in a more realistic modeling of complex problems is introduced. Also, a new way of calculating an error parameter is introduced. The calculated temperatures between nodes were compared against the results obtained from the literature and agreed within less than 1% difference. It is reasonable, therefore, to conclude that the improved TLM model described herein has great potential in heat transfer of biological systems.

Correlation between metal-ceramic bond strength and coefficient of linear thermal expansion difference

The purpose of this study was to evaluate the metal-ceramic bond strength (MCBS) of 6 metal-ceramic pairs (2 Ni-Cr alloys and 1 Pd-Ag alloy with 2 dental ceramics) and correlate the MCBS values with the differences between the coefficients of linear thermal expansion (CTEs) of the metals and ceramics. Verabond (VB) Ni-Cr-Be alloy, Verabond II (VB2), Ni-Cr alloy, Pors-on 4 (P), Pd-Ag alloy, and IPS (I) and Duceram (D) ceramics were used for the MCBS test and dilatometric test. Forty-eight ceramic rings were built around metallic rods (3.0 mm in diameter and 70.0 mm in length) made from the evaluated alloys. The rods were subsequently embedded in gypsum cast in order to perform a tensile load test, which enabled calculating the CMBS. Five specimens (2.0 mm in diameter and 12.0 mm in length) of each material were made for the dilatometric test. The chromel-alumel thermocouple required for the test was welded into the metal test specimens and inserted into the ceramics. ANOVA and Tukey's test revealed significant differences (p=0.01) for the MCBS test results (MPa), with PI showing higher MCBS (67.72) than the other pairs, which did not present any significant differences. The CTE (10-6 oC-1) differences were: VBI (0.54), VBD (1.33), VB2I (-0.14), VB2D (0.63), PI (1.84) and PD (2.62). Pearson's correlation test (r=0.17) was performed to evaluate of correlation between MCBS and CTE differences. Within the limitations of this study and based on the obtained results, there was no correlation between MCBS and CTE differences for the evaluated metal-ceramic pairs.

Thermal performance of sisal fiber-cement roofing tiles for rural constructions

Roofing provides the main protection against direct solar radiation in animal housing. Appropriate thermal properties of roofing materials tend to improve the thermal comfort in the inner ambient. Nonasbestos fiber-cement roofing components reinforced with cellulose pulp from sisal (Agave sisalana) were produced by slurry and dewatering techniques, with an optional addition of polypropylene fibers. Nonasbestos tiles were evaluated and compared with commercially available asbestos-cement sheets and ceramic tiles (frequently chosen as roofing materials for animal housing). Thermal conductivity and thermal diffusivity of tiles were determined by the parallel hot-wire method, along with the evaluation of the downside surface temperature. Cement-based components reinforced with sisal pulp presented better thermal performance at room temperature (25ºC), while those reinforced with sisal pulp added by polypropylene fibers presented better thermal performance at 60ºC. Non-asbestos cement tiles provided more efficient protection against radiation than asbestos corrugated sheets.

Morphological changes in distant muscle fibers following thermal injury in Wistar rats

PURPOSE: Thermal injury causes catabolic processes as the body attempts to repair the damaged area. This study evaluated the effects of a scald injury on the morphology of muscle fibers belonging to a muscle distant from the lesion. METHODS: Thirty Wistar rats were divided into control (C) and scalded (S) groups. Group S was scalded over 45% of the body surface, standardized by body weight. Rats in both groups were euthanized at four, seven and 14 days following the injury. The middle portions of the medial gastrocnemius muscles were sectioned, stained with hematoxylin and eosin and Picrosirius, and submitted to histological analysis. RESULTS: Control group sections exhibited equidistantly distributed polygonal muscle fibers with peripheral nuclei, characteristic of normal muscle. The injured group sections did not consistently show these characteristics; many fibers in these sections exhibited a rounded contour, variable stain intensities, and greater interfiber distances. A substantially increased amount of connective tissue was also observed on the injured group sections. CONCLUSION: This experimental model found a morphological change in muscle distant from the site of thermal injury covering 45% of the body surface.

Mechanical strength and thermal conductivity of low-porosity gypsum plates

The thermal conductivity and mechanical strength of gypsum and gypsum-cellulose plates made from commercial plaster by a new process have been measured. The gypsum parts made by the new process, 'novogesso', have high mechanical strength and low porosity. The gypsum strength derives from both the high aspect ratio of the gypsum crystals and the strong adhesion among them by nano-flat layers of confined water, which behaves as supercooled water. Another contribution to the strength comes from the nano-flatness of the lateral surfaces of the gypsum single crystals. The bending and compression strengths, σB and σc, of gypsum plates prepared by this new technique can be as high as 30 and 100 MPa, respectively. The way gypsum plates have been assembled as well as their low thermal conductivity allowed for the construction of a low-cost experimental house with thermal and acoustic comfort.

Thermal decomposition of mercerized linter cellulose and its acetates obtained from a homogeneous reaction

Cellulose acetates with different degrees of substitution (DS, from 0.6 to 1.9) were prepared from previously mercerized linter cellulose, in a homogeneous medium, using N,N-dimethylacetamide/lithium chloride as a solvent system. The influence of different degrees of substitution on the properties of cellulose acetates was investigated using thermogravimetric analyses (TGA). Quantitative methods were applied to the thermogravimetric curves in order to determine the apparent activation energy (Ea) related to the thermal decomposition of untreated and mercerized celluloses and cellulose acetates. Ea values were calculated using Broido's method and considering dynamic conditions. Ea values of 158 and 187 kJ mol-1 were obtained for untreated and mercerized cellulose, respectively. A previous study showed that C6OH is the most reactive site for acetylation, probably due to the steric hindrance of C2 and C3. The C6OH takes part in the first step of cellulose decomposition, leading to the formation of levoglucosan and, when it is changed to C6OCOCH3, the results indicate that the mechanism of thermal decomposition changes to one with a lower Ea. A linear correlation between Ea and the DS of the acetates prepared in the present work was identified.