Electrochemical and theoretical evaluation of the interaction between dna and amodiaquine: evidence of the guanine adduct formation

The electrochemical behavior of the interaction of amodiaquine with DNA on a carbon paste electrode was studied using voltametric techniques. In an acid medium, an electroactive adduct is formed when amodiaquine interacts with DNA. The anodic peak is dependent on pH, scan rate and the concentration of the pharmaceutical. Adduct formation is irreversible in nature, and preferentially occurs by interaction of the amodiaquine with the guanine group. Theoretical calculations for optimization of geometry, and DFT analyses and on the electrostatic potential map (EPM), were used in the investigation of adduct formation between amodiaquine and DNA.

Electrochemical and theoretical evaluation of the interaction between dna and amodiaquine: evidence of the guanine adduct formation

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

TiO2 synthesized by microwave assisted solvothermal method: Experimental and theoretical evaluation

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Theoretical evaluation of the cataract extraction-refraction-implantation techniques for intraocular lens power calculation

PURPOSE: To evaluate theoretically three previously published formulae that use intra-operative aphakic refractive error to calculate intraocular lens (IOL) power, not necessitating pre-operative biometry. The formulae are as follows: IOL power (D) = Aphakic refraction x 2.01 [Ianchulev et al., J. Cataract Refract. Surg.31 (2005) 1530]; IOL power (D) = Aphakic refraction x 1.75 [Mackool et al., J. Cataract Refract. Surg.32 (2006) 435]; IOL power (D) = 0.07x(2) + 1.27x + 1.22, where x = aphakic refraction [Leccisotti, Graefes Arch. Clin. Exp. Ophthalmol.246 (2008) 729]. METHODS: Gaussian first order calculations were used to determine the relationship between intra-operative aphakic refractive error and the IOL power required for emmetropia in a series of schematic eyes incorporating varying corneal powers, pre-operative crystalline lens powers, axial lengths and post-operative IOL positions. The three previously published formulae, based on empirical data, were then compared in terms of IOL power errors that arose in the same schematic eye variants. RESULTS: An inverse relationship exists between theoretical ratio and axial length. Corneal power and initial lens power have little effect on calculated ratios, whilst final IOL position has a significant impact. None of the three empirically derived formulae are universally accurate but each is able to predict IOL power precisely in certain theoretical scenarios. The formulae derived by Ianchulev et al. and Leccisotti are most accurate for posterior IOL positions, whereas the Mackool et al. formula is most reliable when the IOL is located more anteriorly. CONCLUSION: Final IOL position was found to be the chief determinant of IOL power errors. Although the A-constants of IOLs are known and may be accurate, a variety of factors can still influence the final IOL position and lead to undesirable refractive errors. Optimum results using these novel formulae would be achieved in myopic eyes.

Theoretical analysis of aqueous residues incineration with oxygen enriched flames

The use of oxygen to enrich the oxidizer can be an attractive alternate to increase incineration rates of a combustion chamber originally designed to operate with air. For a certain fuel now rate, if some incineration parameters are held constant (as combustion chamber temperature, turbulence level, and residence time), an increase of incineration rates becomes possible with injection of oxygen. This work presents a theoretical evaluation of combustion air enrichment in a combustion chamber designed to incinerate aqueous residues using methane as fuel and air as oxidizer. Detailed chemistry was employed to predict pollutants formation. The overall process was investigated using the PSR routine from the CHEMKIN library. (C) 1999 Elsevier B.V. Ltd.

Experimental evaluation of the bridgeless interleaved boost PFC converter

This paper presents theoretical evaluation and experimental results to the proposed bridgeless interleaved boost PFC (power factor correction) converter. The application of bridgeless technique causes reduction of conduction losses, while the interleaving technique of the converter cells allows division of the current stress in semiconductor devices and reduction of weight and volume of the input EMI filter. In each cell of the converter, the inductor current operates in discontinuous conduction mode (DCM), which eliminates turn-on switching losses and the effects of reverse recovery in semiconductors, increasing the efficiency of the converter. The experimental results show the power factor of 0.96 for employed voltage ratio and an efficiency of 95.2 % for nominal load conditions. © 2012 IEEE.

Ontological evaluation of enterprise systems interoperability using ebXML

Enterprise systems interoperability (ESI) is an important topic for business currently. This situation is evidenced, at least in part, by the number and extent of potential candidate protocols for such process interoperation, viz., ebXML, BPML, BPEL, and WSCI. Wide-ranging support for each of these candidate standards already exists. However, despite broad acceptance, a sound theoretical evaluation of these approaches has not yet been provided. We use the Bunge-Wand-Weber (BWW) models, in particular, the representation model, to provide the basis for such a theoretical evaluation. We, and other researchers, have shown the usefulness of the representation model for analyzing, evaluating, and engineering techniques in the areas of traditional and structured systems analysis, object-oriented modeling, and process modeling. In this work, we address the question, what are the potential semantic weaknesses of using ebXML alone for process interoperation between enterprise systems? We find that users will lack important implementation information because of representational deficiencies; due to ontological redundancy, the complexity of the specification is unnecessarily increased; and, users of the specification will have to bring in extra-model knowledge to understand constructs in the specification due to instances of ontological excess.

Virtuaalitodellisuuslaboratorion laiteympäristön kehittäminen - ohjaimet ja ohjelmistot

Tämä diplomityö on tehty osana HumanICT-projektia, jonka tavoitteena on kehittää uusi, virtuaalitekniikoita hyödyntävä, työkoneiden käyttäjäliityntöjen suunnittelumenetelmä. Työn tarkoituksena oli kehittää VTT:n Tuotteet ja tuotanto tutkimusyksikköön kuluvan Ihminen-kone-turvallisuus ryhmän nykyistä virtuaalitodellisuuslaboratoriota siten, että sitä voidaan käyttää työkoneiden suunnittelussa sekä monipuolisissa ergonomiatarkasteluissa. Itse ympäristön kehittäminen pitää sisällään uuden ohjainjärjestelmän suunnittelun sekä sen implementoinnin nykyisin käytössä olevaan virtuaaliympäristöön. Perinteisesti ohjaamosimulaattorit ovat olleet sovelluskohteisiin räätälöityjä, joten ne ovat kalliita ja niiden konfiguroinnin muuttaminen on vaikeaa, joskus jopa mahdotonta. Tämän työntarkoituksena oli kehittää PC-tietokoneeseen ja yleiseen käyttöjärjestelmään perustuva ohjainjärjestelmä, joka on nopeasti kytkettävissä erilaisiin virtuaaliympäristön sovelluksiin, kuten ohjaamomalleihin. Työssä tarkasteltiin myös tapoja mallintaa fysikaalisia ilmiöitä reaaliaikasovelluksissa, eli on-line simuloinnissa. Tämän tarkastelun perusteella etsittiin ja valittiin jatkokäsittelyyn ohjelmistoja, joiden reaaliaikaisen dynamiikan simulointialgoritmitolivat kaikkein kehittyneimpiä ja monipuolisia.

Railcarrier in Intermodal Freight Transportation Network

The major objective of this thesis is to describe and analyse how a railcarrier is engaged in an intermodal freight transportation network through its role and position. Because of the fact that the role as a conceptualisation has a lot of parallels with the position, both these phenomena are evaluated theoretically and empirically. VR Cargo (a strategical business unitof the Finnish railway company VR Ltd.) was chosen to be the focal firm surrounded by the actors of the focal net. Because of the fact that networks are sets of relationships rather than sets of actors, it is essential to describe the dimensions of the relationships created through the time thus having a past, presentand future. The roles are created during long common history shared by the actors especially when IM networks are considered. The presence of roles is embeddedin the tasks, and the future is anchored to the expectations. Furthermore, in this study role refers to network dynamics, and to incremental and radical changes in the network, in a similar way as position refers to stability and to the influences of bonded structures. The main purpose of the first part of the study was to examine how the two distinctive views that have a dominant position in modern logistics ¿ the network view (particularly IMP-based network approach) and the managerial view (represented by Supply Chain Management) differ, especially when intermodalism is under consideration. In this study intermodalism was defined as a form of interorganisational behaviour characterized by the physical movement of unitized goods with Intermodal Transport Units, using more than one mode as performed by the net of operators. In this particular stage the study relies mainly on theoretical evaluation broadened by some discussions with the practitioners. This is essential, because the continuous dialogue between theory and practice is highly emphasized. Some managerial implications are discussed on the basis of the theoretical examination. A tentative model for empirical analysis in subsequent research is suggested. The empirical investigation, which relies on the interviews among the members in the focal net, shows that the major role of the focal company in the network is the common carrier. This role has some behavioural and functional characteristics, such as an executive's disclosure expressing strategic will attached with stable and predictable managerial and organisational behaviour. Most important is the notion that the focal company is neutral for all the other operators, and willing to enhance and strengthen the collaboration with all the members in the IM network. This also means that all the accounts are aimed at being equal in terms of customer satisfaction. Besides, the adjustments intensify the adopted role. However, the focal company is also obliged tosustain its role as it still has a government-erected right to maintain solely the railway operations on domestic tracks. In addition, the roles of a dominator, principal, partner, subcontractor, and integrator were present appearing either in a dyadic relationship or in net(work) context. In order to reveal differentroles, a dualistic interpretation of the concept of role/position was employed.

Poluição das águas por herbicidas utilizados no cultivo do arroz irrigado na região central do estado do Rio Grande do Sul, Brasil: predição teórica e monitoramento

This article presents an evaluation of the pollution of river water by herbicides used in the culture of irrigated rice in Rio Grande do Sul State, Brazil. Firstly, a theoretical evaluation was made using the approaches suggested by EPA-USA, the "Groundwater Ubiquity Score" index and the Goss method to estimate the pollution possibilities. Afterwards, a monitoring program was established for the rivers of the area from 2001 to 2003 to investigate the presence of herbicide residues. The results indicate that the herbicides clomazone and propanil are the ones with larger presence and frequency in the analyzed samples. The theoretical forecast was confirmed by the results of the monitoring program.

Can course format influence the performance of students in an advanced cardiac life support (ACLS) program?

Advanced cardiac life support (ACLS) is a problem-based course that employs simulation techniques to teach the standard management techniques of cardiovascular emergencies. Its structure is periodically revised according to new versions of the American Heart Association guidelines. Since it was introduced in Brazil in 1996, the ACLS has been through two conceptual and structural changes. Detailed documented reports on the effect of these changes on student performance are limited. The objective of the present study was to evaluate the effect of conceptual and structural changes of the course on student ACLS performance at a Brazilian training center. This was a retrospective study of 3266 students divided into two groups according to the teaching model: Model 1 (N = 1181; 1999-2003) and Model 2 (N = 2085; 2003-2007). Model 2 increased practical skill activities to 75% of the total versus 60% in Model 1. Furthermore, the teaching material provided to the students before the course was more objective than that used for Model 1. Scores greater than 85% in the theoretical evaluation and approval in the evaluation of practice by the instructor were considered to be a positive outcome. Multiple logistic regression was used to adjust for potential confounders (specialty, residency, study time, opportunity to enhance practical skills during the course and location where the course was given). Compared to Model 1, Model 2 presented odds ratios (OR) indicating better performance in the theoretical (OR = 1.34; 95%CI = 1.10-1.64), practical (OR = 1.19; 95%CI = 0.90-1.57), and combined (OR = 1.38; 95%CI = 1.13-1.68) outcomes. Increasing the time devoted to practical skills did not improve the performance of ACLS students.

O futuro das ideias: análise estrutural & incertezas-críticas prospectivas para think tanks

O objetivo deste trabalho é identificar as incertezas-críticas prospectivas para fhínk fanks, importante subsídio na elaboração de cenários prospectivos para essas organizações. O enfoque é qualitativo: os dados, coletados por bibliografia e em entrevistas com executivos estratégicos da Fundação Getulio Vargas e especialistas internacionais, foram tratados pelo método da Análise Estrutural. Para tanto, utilizouse o Modelo URCA (MARQUES, 1988). Acredita-se tratar de abordagem inédita na área, pois registro de Análises Prospectivas para thínk tanks não foram localizados. A base teórica analisa diversas definições e classificações de fhínk fanks, identifica atributos comuns a tais conceitos e, a partir deste referencial, apresenta a definição de thínk tank, objeto deste estudo. Em seguida, a partir dos dados coletados, são descritas 21 variáveis prospectivas. Essa lista inicial de variáveis é submetida ao Modelo URCA de Análise Estrutural, gerando, como resultado, oito incertezascríticas prospectivas para thínk fanks: Internacionalização de thínk fanks; Globalização da agenda; Projeção internacional das nações; Concorrência entre thínk tanks; Concorrência de organizações não-governamentais, consultorias, web e similares; Quadro técnico; Corpo dirigente; e Diversificação e sustentação financeiras.

A Construção do processo democrático de auto-avaliação institutucional na UNESP

O desenvolvimento de um processo democrático de avaliação institucional na UNESP, uma universidade multi-campus, envolveu três desafios: garantir o envolvimento de grupos representativos da comunidade no processo de avaliação; atribuir poder e responsabilidade a cada setor acadêmico e administrativo no processo de avaliação; criar uma cultura de auto-avaliação e reflexão que possibilitasse debate crítico e auto-gestão dos projetos acadêmicos. Com base nos termos de referência estabelecidos pela comunidade a CPA desenvolveu uma metodologia de avaliação democrática e investigativa, orientada para a auto-gestão e de natureza quali-quantitativa. Fundamentada em três enfoques teóricos de avaliação, o democrático, o de tomada de decisão e o crítico o processo envolveu três funções: a diagnóstica, a formativo-reflexiva e a de revisão crítica. Atualmente os usos dos resultados da avaliação para orientar políticas e decisões acadêmicas, especialmente nos cursos de graduação, evidenciam avanços no processo de internalização de cultura de avaliação orientada para auto-gestão.

s-wave approximation for asymmetry in nonmesonic decay of finite hypernuclei

We establish the bridge between the commonly used Nabetani-Ogaito-Sato-Kishimoto (NOSK) formula for the asymmetry parameter a(Lambda) in the Lambda p -> np emission of polarized hypernuclei, and the shell-model (SM) formalism for finite hypernuclei. We demonstrate that the s-wave approximation leads to a SM formula for a(Lambda) that is as simple as the NOSK one and that reproduces the exact results for (5)(Lambda)He and (12)(Lambda)C better than initially expected. The simplicity achieved here is indeed remarkable. The new formalism makes the theoretical evaluation of a(Lambda) more transparent and explains clearly why the one-meson exchange model is unable to account for the experimental data of (5)(Lambda)He.