LED bulb lamps technical specification and testing procedure for solar home systems.

With the consolidation of the new solid state lighting LEOs devices, te5t1n9 the compliance 01 lamps based on this technology lor Solar Home Systems (SHS) have been analyzed. The definition of the laboratory procedures to be used with final products 15 a necessary step in arder to be able to assure the quality of the lamps prior to be installed [1]. As well as with CFL technology. particular attention has been given to simplicity and technical affordability in arder to facilitate the implementation of the test with basie and simple laboratory too15 even on the same SHS electrification program locations. The block of test procedures has been applied to a set of 14 low-cost lamps. They apply to lamp resistance, reliability and performance under normal, extreme and abnormal operating conditions as a simple but complete quality meter tool 01 any LEO bulb.

LED bulbs technical specification and testing procedure for solar home systems

The definition of technical specifications and the corresponding laboratory procedures are necessary steps in order to assure the quality of the devices prior to be installed in Solar Home Systems (SHS). To clarify and unify criteria a European project supported the development of the Universal Technical Standard for Solar Home Systems (UTSfSHS). Its principles were to generate simple and affordable technical requirements to be optimized in order to facilitate the implementation of tests with basic and simple laboratory tools even on the same SHS electrification program countries. These requirements cover the main aspects of this type of installations and its lighting chapter was developed based on the most used technology at that time: fluorescent tubes and CFLs. However, with the consolidation of the new LED solid state lighting devices, particular attention is being given to this matter and new procedures are required. In this work we develop a complete set of technical specifications and test procedures that have been designed within the frame of the UTSfSHS, based on an intense review of the scientific and technical publications related to LED lighting and their practical application. They apply to lamp reliability, performance and safety under normal, extreme and abnormal operating conditions as a simple but complete quality meter tool for any LED bulb.

Computer-aided System of Semantic Text Analysis of a Technical Specification

The given work is devoted to development of the computer-aided system of semantic text analysis of a technical specification. The purpose of this work is to increase efficiency of software engineering based on automation of semantic text analysis of a technical specification. In work it is offered and investigated the model of the analysis of the text of the technical project is submitted, the attribute grammar of a technical specification, intended for formalization of limited Russian is constructed with the purpose of analysis of offers of text of a technical specification, style features of the technical project as class of documents are considered, recommendations on preparation of text of a technical specification for the automated processing are formulated. The computer-aided system of semantic text analysis of a technical specification is considered. This system consists of the following subsystems: preliminary text processing, the syntactic and semantic analysis and construction of software models, storage of documents and interface.

Computer Support of Semantic Text Analysis of a Technical Specification on Designing Software

The given work is devoted to development of the computer-aided system of semantic text analysis of a technical specification. The purpose of this work is to increase efficiency of software engineering based on automation of semantic text analysis of a technical specification. In work it is offered and investigated a technique of the text analysis of a technical specification is submitted, the expanded fuzzy attribute grammar of a technical specification, intended for formalization of limited Russian language is constructed with the purpose of analysis of offers of text of a technical specification, style features of the technical specification as class of documents are considered, recommendations on preparation of text of a technical specification for the automated processing are formulated. The computer-aided system of semantic text analysis of a technical specification is considered. This system consist of the following subsystems: preliminary text processing, the syntactic and semantic analysis and construction of software models, storage of documents and interface.

Plataforma de gestão de incidentes

Mestrado em Engenharia Electrotécnica e de Computadores. Área de Especialização de Telecomunicações.

TFC BD relacionals : sistema gestió d'amonestacions i sancions en centres educatius

La Generalitat de Catalunya, com a projecte de millores dins l'ensenyament, ha decidit preparar una implementació d'un sistema de gestió d'amonestacions i sancions en els centres educatius. Aquest sistema, serà un complement d'altres gestions ja existents als centres educatius, els quals tenen altres funcions diferents a la que es pretén al nou projecte. Aquest treball final de carrera és una proposta per donar una solució vàlida a les necessitats esmentades i cobrint totes les especificacions tècniques, incloses al plec tècnic de condicions.

Collage, a Collaborative Learning Design Editor Based on Patterns

This paper introduces Collage, a high-level IMS-LD compliant authoring tool that is specialized for CSCL (Computer-Supported Collaborative Learning). Nowadays CSCL is a key trend in elearning since it highlights the importance of social interactions as an essential element of learning. CSCL is an interdisciplinary domain, which demands participatory design techniques that allow teachers to get directly involved in design activities. Developing CSCL designs using LD is a difficult task for teachers since LD is a complex technical specification and modelling collaborative characteristics can be tricky. Collage helps teachers in the process of creating their own potentially effective collaborative Learning Designs by reusing and customizing patterns, according to the requirements of a particular learning situation. These patterns, called Collaborative Learning Flow Patterns (CLFPs), represent best practices that are repetitively used by practitioners when structuring the flow of (collaborative) learning activities. An example of an LD that can be created using Collage is illustrated in the paper. Preliminary evaluation results show that teachers, with experience in CL but without LD knowledge, can successfully design real collaborative learning experiences using Collage.

Tapiola-ryhmän Yhtiökokousjärjestelmä-ohjelmiston määrittely ja suunnittelu

Tässä insinöörityössä selvitettiin mahdollisuuksia parantaa Tapiola-ryhmän Yhtiökokousjärjestelmä-ohjelmiston ominaisuuksia ja tietoturvallisuutta. Järjestelmää käytetään Tapiola-ryhmän vakuutusyhtiöiden yhtiökokouksiin osallistuvien osakkaiden kirjaamiseen ja heidän äänten laskentaan. Tutkimuksen perusteella tehtiin järjestelmän määrittely ja suunnittelu, joiden tuloksena syntyivät toiminnallinen ja tekninen määrittelydokumentaatio, jotka toimivat pohjana uuden Yhtiökokousjärjestelmän toteutukselle. Työ tehtiin Tapiola-ryhmälle Tieto-Tapiola Oy:n tilauksesta. Työn alussa tutkittiin erilaisia mahdollisuuksia toteuttaa järjestelmän ohjelmisto- ja tietokanta-arkkitehtuuri, joiden perusteella määrittelyä ja suunnittelua alettiin toteuttaa. Tutkimuksen perusteella päädyttiin käyttämään Java SE -arkkitehtuuria sovelluksen toteutukseen ja SQL Server -tietokantaa järjestelmän tietovarastona. Valittuihin ratkaisuihin päädyttiin niiden hyvien tietoturvallisuus- ja kertakirjausominaisuuksien takia. Toiminnallisessa määrittelydokumentissa käydään läpi järjestelmälle asetettuja vaatimuksia ja kuvataan sen toiminnot, liiketoimintaluokkamalli, käyttöliittymä ja tulosteet. Lisäksi siinä otetaan kantaa järjestelmän käyttöympäristöön, ulkoisiin tietokantaliittymiin, käyttäjän tunnistautumiseen ja tietoturvallisuuteen sekä käydään läpi sen toiminta käyttäjien näkökulmasta. Toiminnallisen määrittelydokumentin pohjalta luotiin tekninen määrittelydokumentti. Siinä kuvataan järjestelmän ympäristö ja ohjelmisto- sekä tietokanta-arkkitehtuuri yleisellä tasolla. Tämän lisäksi järjestelmän arkkitehtuuria käydään myös tarkemmin läpi sekä kuvataan moduulit ja toiminnot niin tarkasti, että niiden perusteella voidaan toteuttaa koko järjestelmä. Työn tuloksena syntyivät kattava toiminnallinen ja tekninen määrittelydokumentaatio, joissa käydään läpi kaikki järjestelmän toteuttamiseen tarvittavat elementit sillä tarkkuudella, että järjestelmän toteuttaminen voidaan aloittaa.

GateKeeper - Käyttäjienhallintaohjelma

Tämän insinöörityön tavoitteena oli suunnitella ja toteuttaa selainpohjainen käyttäjienhallintaohjelma GateKeeper Karttakeppi.com-työryhmälle. GateKeeper-ohjelma kuuluu osana laajempaan ohjelmistoprojektiin, jonka tarkoituksena on tuottaa opetusmateriaalia etäopiskelijoille Internetissä. Etäopetusmateriaalin tuottamisessa käytetään useita ohjelmia, joille on määriteltävä eritasoisia käyttäjätunnuksia ja käyttöoikeuksia. Ohjelmien käyttäjienhallintamekanismit ovat erilaisia, mikä osaltaan lisää järjestelmän ylläpitäjien työtä ja vastuuta. GateKeeper-ohjelman tavoitteena on nopeuttaa, helpottaa ja yksinkertaistaa käyttäjienhallintaan liittyviä toimintoja tietoturvallisesti. GateKeeper-ohjelma on suunniteltu siten, että uusien käyttäjien ja ohjelmien lisäämiselle ei ole asetettu rajoja. Jokaisen lisättävän ohjelman yhteydessä on kuitenkin selvitettävä kyseisen ohjelman käyttäjienhallintamekanismi. Tässä insinöörityössä tutkittiin, miten versionhallintaohjelma Subversionin, julkaisujärjestelmä Mambon, sekä oppimisalusta Moodlen käyttäjiä voidaan keskitetysti hallinnoida GateKeeper-ohjelman avulla. GateKeeper-ohjelma noudattaa arkkitehtuuriltaan kolmikerrosmallia, jossa käyttöliittymä, sovelluslogiikka ja tietovarasto on erotettu toisistaan. Ohjelma koostuu joukosta PHP-kielellä toteutettuja dynaamisia web-sivuja. Tietovarastona käytetään tietokantapalvelimella sijaitsevaa MySQL-tietokantaa.

Standardisation process of Universal Mobile Telecommunication System in Third Generation Partnership Project

Third Generation Partnership Project (3GPP) on organisaatio, joka määrittelee ja ylläpitää kolmannen sukupolven matkapuhelinverkon standardeja. Organisaatio luotiin monien eri standardointielinten toimesta havaittaessa, ettei maailmanlaajuista kolmannen sukupolven matkapuhelinteknologiaa voitaisi määritellä ilman laajaa yhteistyötä. 3GPP:ssä standardointityö on jakautunut usealle tekniselle määrittelyryhmälle. Jokaisen ryhmän tehtävänä on kehittää määrittelyjä ja raportteja omalla vastuualueellaan. 3GPP:ssä määrittelytyötä tehdään samanaikaisesti teknillisten määrittelyryhmien välillä. Tämä vaatii tiukkoja sääntöjä määrittelyjen luonti-, hyväksyntä- ja ylläpitotehtäviin. Vain siten on mahdollista hallita määrittelyihin tulevia muutoksia ja tarvittavaa kokonaistyömäärää. Tämä diplomityö kuvaa 3GPP:n määrittelemän UMTS-teknologian. Työssä keskitytään tarkemmin 3GPP-organisaation rakenteeseen, määritysten tekemiseen ja työskentelytapoihin. Tämä diplomityö osoittaa millainen organisaatio ja säännöt vaaditaan maailmanlaajuisen matkapuhelinjärjestelmän kehittämiseen.

Converter-Fed Induction Motor Losses: Determination With IEC Methods

Energy efficiency is an important topic when considering electric motor drives market. Although more efficient electric motor types are available, the induction motor remains as the most common industrial motor type. IEC methods for determining losses and efficiency of converter-fed induction motors were introduced recently with the release of technical specification IEC/TS 60034-2-3. Determining the induction motor losses with IEC/TS 60034-2-3 method 2-3-A and assessing the practical applicability of the method are the main interests of this study. The method 2-3-A introduces a specific test converter waveform to be used in the measurements. Differences between the induction motor losses with a test converter supply, and with a DTC converter supply are investigated. In the IEC methods, the tests are run at motor rated fundamental voltage, which, in practice, requires the frequency converter to be fed with a risen input voltage. In this study, the tests are run on both frequency converters with artificially risen converter input voltage, resulting in rated motor fundamental input voltage as required by IEC. For comparison, the tests are run with both converters on normal grid input voltage supply, which results in lower motor fundamental voltage and reduced flux level, but should be more relevant from practical point of view. According to IEC method 2-3-A, tests are run at rated motor load, and to ensure comparability of the results, the rated load is used in the grid-fed converter measurements, although motor is overloaded while producing the rated torque at reduced flux level. The IEC 2-3-A method requires also sinusoidal supply test results with IEC method 2-1-1B. Therefore, the induction motor losses with the recently updated IEC 60034-2-1 method 2-1-1B are determined at the motor rated voltage, but also at two lower motor voltages, which are according to the output fundamental voltages of the two network-supplied converters. The method 2-3-A was found to be complex to apply but the results were stable. According to the results, the method 2-3-A and the test converter supply are usable for comparing losses and efficiency of different induction motors at the operating point of rated voltage, rated frequency and rated load, but the measurements do not give any prediction of the motor losses at final application. One might therefore strongly criticize the method’s main principles. It seems, that the release of IEC 60034-2-3 as a technical specification instead of a final standard for now was justified, since the practical relevance of the main method is questionable.

Service quality and reliability assessment of mobile communication infrastructure

The service quality of any sector has two major aspects namely technical and functional. Technical quality can be attained by maintaining technical specification as decided by the organization. Functional quality refers to the manner which service is delivered to customer which can be assessed by the customer feed backs. A field survey was conducted based on the management tool SERVQUAL, by designing 28 constructs under 7 dimensions of service quality. Stratified sampling techniques were used to get 336 valid responses and the gap scores of expectations and perceptions are analyzed using statistical techniques to identify the weakest dimension. To assess the technical aspects of availability six months live outage data of base transceiver were collected. The statistical and exploratory techniques were used to model the network performance. The failure patterns have been modeled in competing risk models and probability distribution of service outage and restorations were parameterized. Since the availability of network is a function of the reliability and maintainability of the network elements, any service provider who wishes to keep up their service level agreements on availability should be aware of the variability of these elements and its effects on interactions. The availability variations were studied by designing a discrete time event simulation model with probabilistic input parameters. The probabilistic distribution parameters arrived from live data analysis was used to design experiments to define the availability domain of the network under consideration. The availability domain can be used as a reference for planning and implementing maintenance activities. A new metric is proposed which incorporates a consistency index along with key service parameters that can be used to compare the performance of different service providers. The developed tool can be used for reliability analysis of mobile communication systems and assumes greater significance in the wake of mobile portability facility. It is also possible to have a relative measure of the effectiveness of different service providers.

Estudo sobre o potencial de alguns latossolos da região do Vale do Paraíba, estado de São Paulo, para uso em camadas estruturais de pavimentos de baixo volume de tráfego

The main purpose of this research is to raise, through lab rehearsals, the geometric properties of some oxisols from the region of Vale do Paraíba as well as comparing them to demands prescribed by Technical Specifications ESP08/05 of the Road Department of the State of Paraná, for sub-base or fine grained lateritic soil base (SAFL) and in the Technical Specification ET-DEP00/006 of the Road Department of the State of São Paulo (DER/SP) for subbase or crushed stone base. According to the results that were obtained it will be feasible to appraise the usage of these sorts of soils in structure layers of low-weight traffic pavements

Qualidade da construção civil de estrutura de concreto armado, alvenaria de vedação e revestimento externo de obras verticais

The main purpose of this research is to raise, through lab rehearsals, the geometric properties of some oxisols from the region of Vale do Paraíba as well as comparing them to demands prescribed by Technical Specifications ESP08/05 of the Road Department of the State of Paraná, for sub-base or fine grained lateritic soil base (SAFL) and in the Technical Specification ET-DEP00/006 of the Road Department of the State of São Paulo (DER/SP) for subbase or crushed stone base. According to the results that were obtained it will be feasible to appraise the usage of these sorts of soils in structure layers of low-weight traffic pavements

Desgaste e rugosidade superficial de um cimento de ionômero de vidro nanoparticulado

To compare the abrasion wear resistance and superficial roughness of different glass ionomer cements used as restorative materials, focusing on a new nanoparticulate material. Material and Method: Three glass ionomer cements were evaluated: Ketac Molar, Ketac N100 and Vitremer (3M ESPE, St. Paul, MN, USA), as well as the Filtek Z350 (3M ESPE, St. Paul, MN, USA). For each material were fabricated circular specimens (n=12), respecting the handling mode specified by the manufacturer, which were polished with sandpaper disks of decreasing grit. The wear was determined by the amount of mass (M) lost after brushing (10,000 cycles) and the roughness (Ra) using a surface roughness tester. The difference between the Minitial and Mfinal (ΔM) as well as beroughness of aesthetic restorative materials: an in vitro comparison. SADJ. 2001; 56(7): 316-20. 11. Yip HK, Peng D, Smales RJ. Effects of APF gel on the physical structure of compomers and glass ionomer cements. Oper. Dent. 2001; 26(3): 231-8. 12. Ma T, Johnson GH, Gordon GE. Effects of chemical disinfectants on the surface characteristics and color of denture resins. J Prosthet Dent 1997; 77(2): 197-204. 13. International organization for standardization. Technical specification 14569-1. Dental Materials – guidance on testing of wear resistance – PART I: wear by tooth brushing. Switzerland: ISO; 1999. 14. Bollen CML, Lambrechts P, Quirynen M. Comparison of surface roughness of oral hard materials to the threshold surface roughness for bacterial plaque retention: a review of the literature. Dent Mater.1997; 13(4): 258-9. 15. Kielbassa AM, Gillmann C, Zantner H, Meyer-Lueckel H, Hellwig E, Schulte-Mönting J. Profilometric and microradiographic studies on the effects of toothpaste and acidic gel abrasivity on sound and demineralized bovine dental enamel. Caries Res. 2005; 39(5): 380-6. 16. Tanoue N, Matsumara H, Atsuta M. Wear and surface roughness of current prosthetic composites after toothbrush/dentifrice abrasion. J Prosthet Dent. 2000; 84(1): 93-7. 17. Heath JR, Wilson HJ. Abrasion of restorative materials by toothpaste. J Oral Rehabil. 1976; 3(2): 121-38. 18. Frazier KB, Rueggeberg FA, Mettenburg DJ. Comparasion of wearresistance of class V restorative materials. J Esthet Dent. 1998; 10(6): 309-14. 19. Momoi Y, Hirosakil K, Kohmol A, McCabe JF. In vitro toothebrushdentifrrice abrasion of resin-modified glass ionomers. Dent Mater. 1997; 13(2): 82-8. 20. Turssi CP, Magalhães CS, Serra MC, Rodrigues Jr.AL. Surface roughness assessment of resin-based materials during brushing preceded by pHcycling simulations. Oper Dent. 2001; 26(6): 576-84. 21. Wang L, Cefaly DF, Dos Santos JL, Dos Santos JR, Lauris JR, Mondelli RF, et al. In vitro interactions between lactic acid solution and art glassionomer cements. J Appl Oral Sci. 2009; 17(4): 274-9. 22. Carvalho FG, Fucio SB, Paula AB, Correr GM, Sinhoreti MA, PuppinRontani RM. Child toothbrush abrasion effect on ionomeric materials. J Dent Child (Chic). 2008; 75(2): 112-6. 23. Coutinho E, Cardoso MV, De Munck J, Neves AA, Van Landuyt KL, Poitevin A, et al. Bonding effectiveness and interfacial characterization of a nano-filled resin-modified glass-ionomer. Dent Mater. 2009; 25(11): 1347-57. tween Rainitial and Rafinal (ΔRa) were also used for statistical analysis (α=0.05). Results: Except for the composite, significant loss of mass was observed for all glass ionomer cements and the ΔM was comparable for all of them. Significant increase in roughness was observed only for Vitremer and Ketac N100. At the end of the brushing cycle, just Vitremer presented surface roughness greater than the composite resin. Conclusion: All glass ionomer cements showed significant weight loss after 10,000 cycles of brushing. However, only Vitremer showed an increase of roughness greater than the Z350 resin, while the nanoparticulate cement Ketac N100 showed a smooth surface comparable to the composite.