Projecto e implementação de um sistema de alimentação para um transformador de alta tensão

Neste trabalho pretende-se estudar, dimensionar e implementar experimentalmente de um sistema de alimentação para transformadores de alta tensão a alta frequência. Este sistema será constituído por dois elementos principais, um rectificador monofásico em ponte totalmente controlado e por um inversor de tensão. Inicialmente realizou-se um estudo sobre as diferentes topologias possíveis para o rectificador considerando diferentes tipos de carga. Realizou-se, também, um estudo sobre o circuito de geração dos impulsos de disparo dos tiristores, executado com base num circuito integrado TCA 785, dimensionou-se os elementos constituintes do circuito de disparo, e de um sistema de controlo da tensão de saída do rectificador. Posteriormente estudou-se o funcionamento do inversor de tensão, definindo-se os modos de operação e dimensionou-se um circuito ressonante tendo em conta os parâmetros construtivos do transformador que se pretende utilizar. Finalmente procedeu-se à implementação prática dos sistemas previamente dimensionados e simulados e à apresentação dos respectivos resultados.

The Effects of a 785-nm AlGaInP Laser on the Regeneration of Rat Anterior Tibialis Muscle After Surgically-Induced Injury

Objective: This study aims to investigate the effects of low-level laser therapy (LLLT) on muscle regeneration. For this purpose, the anterior tibialis muscle of 48 male Wistar rats received AlGaInP laser treatment (785 nm) after surgically-induced injury. Background Data: Few studies have been conducted on the effects of LLLT on muscle regeneration at different irradiation doses. Materials and Methods: The animals were randomized into four groups: uninjured rats (UN); uninjured and laser-irradiated rats (ULI); injured rats (IN); and injured and laser-irradiated rats (ILI). The direct contact laser treatment was started 24 h after surgery. An AlGaInP diode laser emitting 75 mW of continuous power at 785 nm was used for irradiation. The laser probe was placed at three treatment points to deliver 0.9 J per point, for a total dose of 2.7 J per treatment session. The animals were euthanized after treatment sessions 1, 2, and 4. Mounted sections were stained with hematoxylin and eosin and used for quantitative morphological analysis, in which the number of leukocytes and fibroblasts were counted over an area of 4480 mu m(2). The data were statistically analyzed by analysis of variance (ANOVA) and the Bonferroni t-test. Results: Quantitative data showed that the number of both polymorphonuclear and mononuclear leukocytes in the inflammatory infiltrate at the injury site was smaller in the ILI(1), ILI(2), and ILI(4) subgroups compared with their respective control subgroups (IN(1), IN(2), and IN(4)) for sessions 1, 2, and 4, respectively (p < 0.05). On the other hand, the number of fibroblasts increased after the fourth treatment session (p < 0.05). With regard to the regeneration of muscle fibers following injury, only after the fourth treatment session was it possible to find muscle precursor cells such as myoblasts and some myotubes in the ILI(4) subgroup. Conclusion: During the acute inflammatory phase, the AlGaInP laser treatment was found to have anti-inflammatory effects, reducing the number of leukocytes at the injury site and accelerating the regeneration of connective tissue.

Método para deteção de 2,4,6-TCA por contaminação de gases halogenados de uma superfície emissora de iões positivos

Dissertação para obtenção do Grau de Mestre em Engenharia Física

La utilització de l'art teràpia com a instrument per al tractament dels TCA

En les últimes dècades, una gran varietat d'intervencions psicològiques basades en teràpies interpersonals, cognitiu-conductuals, sistèmiques i farmacològiques han anat guanyant terreny en el tractament dels trastorns de la conducta alimentària Junt amb aquest tipus de teràpies, han començat a emergir aproximacions multidisciplinàries com per exemple la incorporació de teràpies experimentals combinades amb una o dues formes de teràpia més tradicionals en el tractament dels TCA. Alguns programes fins i tot han incorporat teràpies alternatives i holístiques, com l'art teràpia, que funcionen com a nucli de la seva filosofia. Tanmateix, actualment no existeixen estudis publicats que corroborin l'eficàcia d'aquest tipus de teràpies en els tractaments dels TCA. Així doncs, el propòsit d'aquest treball és el de destacar, explorar i aprofundir en els diferents tipus d'art teràpia utilitzats en el tractament dels TCA, així com estimular la discussió pel que fa a les investigacions futures sobre art teràpia i el tractament dels trastorns alimentaris.

Troubles du comportement alimentaire (TCA), sports de remise en forme et motivations de pratique = Fitness sports, sport motives and eating disorders

Cet article a pour but d'identifier et de mieux comprendre les liens entre les motivations des pratiquantes de sports de remise en forme, les troubles du comportement alimentaire (TCA) et les troubles psychologiques associés (i.e., insatisfaction corporelle, dépendance à l'exercice physique). Au total, 1270 pratiquantes ont répondu à un questionnaire et 40 ont participé à un entretien semi-directif. Les motivations de perte de poids et/ou modification de l'apparence corporelle sont en lien avec les TCA et l'insatisfaction corporelle. La dépendance à l'exercice physique n'est pas systématique chez les femmes avec TCA. Les pratiquantes de sports de remise en forme motivées uniquement par la perte de poids et/ou la modification de l'apparence sont plus à risques dans levdéveloppement des TCA. The aim of this study was to identify and to better understand links between females' motives in fitness sports, eating disorders (ED) and associated psychological disorders (i.e. body dissatisfaction, exercise dependence). In all, 1270 women were asked by questionnaire and 40 by semi-structured interview. Weight loss/body appearance change motives are related to ED and body dissatisfaction. Exercise dependence are not systematic in women with ED. Fitness sports are at risk in the development of ED for women motivated only by weight loss/body appearance change motives

Impairment of locomotor activity induced by the novelN-acylhydrazone derivatives LASSBio-785 and LASSBio-786 in mice

The N-acylhydrazone (NAH) analogues N-methyl 2-thienylidene 3,4-benzoylhydrazine (LASSBio-785) and N-benzyl 2-thienylidene 3,4-benzoylhydrazine (LASSBio-786) were prepared from 2-thienylidene 3,4-methylenedioxybenzoylhydrazine (LASSBio-294). The ability of LASSBio-785 and LASSBio-786 to decrease central nervous system activity was investigated in male Swiss mice. LASSBio-785 or LASSBio-786 (30 mg/kg, ip) reduced locomotor activity from 209 ± 26 (control) to 140 ± 18 (P < 0.05) or 146 ± 15 crossings/min (P < 0.05), respectively. LASSBio-785 (15 or 30 mg/kg, iv) also reduced locomotor activity from 200 ± 15 to 116 ± 29 (P < 0.05) or 60 ± 16 crossings/min (P < 0.01), respectively. Likewise, LASSBio-786 (15 or 30 mg/kg, iv) reduced locomotor activity from 200 ± 15 to 127 ± 10 (P < 0.01) or 96 ± 14 crossings/min (P < 0.01), respectively. Pretreatment with flumazenil (20 mg/kg,ip) prevented the locomotor impairment induced by NAH analogues (15 mg/kg, iv), providing evidence that the benzodiazepine (BDZ) receptor is involved. This finding was supported by the structural similarity of NAH analogues to midazolam. However, LASSBio-785 showed weak binding to the BDZ receptor. LASSBio-785 or LASSBio-786 (30 mg/kg,ip, n = 10) increased pentobarbital-induced sleeping time from 42 ± 5 (DMSO) to 66 ± 6 (P < 0.05) or 75 ± 4 min (P < 0.05), respectively. The dose required to achieve 50% hypnosis (HD50) following iv injection of LASSBio-785 or LASSBio-786 was 15.8 or 9.5 mg/kg, respectively. These data suggest that both NAH analogues might be useful for the development of new neuroactive drugs for the treatment of insomnia or for use in conjunction with general anesthesia.

Análisis de la Cooperación Multilateral para la Gestión de biodiversidad en Instituciones Subregionales. Caso de Estudio: Estrategia regional para la conservación y uso Sostenible de recursos en el Amazonas (TCA) y Proyecto Facilitación de financiamiento para negocios de biodiversidad y apoyo al desarrollo de actividades del mercado en la Región Andina (CAN) 2000-2009

Este trabajo de investigación analiza la importancia de la cooperación internacional para la gestión de biodiversidad entregada por el Global Environmental Facilty-GEF, para la conservación y uso sostenible de la biodiversidad en la cuenca Andino-amazónica. Esto a través del estudio de los proyectos de alcance regional financiados a dos instituciones subregionales, el primero, “Estrategia Regional para la Conservación y Uso Sostenible de Recursos en el Amazonas” perteneciente al Tratado de Cooperación Amazónica-TCA, y el segundo, “Facilitación de Financiamiento para Negocios de Biodiversidad y Apoyo al Desarrollo de Actividades de Mercado en la Región Andina” presentado por la Banco de Desarrollo de América Latina-CAF.

La imagen corporal en relación con los TCA en adolescentes vascos de 12 a 18 años.

Resumen basado en el de la publicación

Consumismo, valores y TCA.

El artículo forma parte de una sección dedicada a reflexión

Trastornos de la conducta alimentaria (TCA) : ¿qué podemos hacer?

Contiene la dirección del Centro de Información, Formación y Orientación Sociosanitaria para Jóvenes (CIFOS) del Consejo de Juventud de Castilla-La Mancha

Evaluation of dental pulp repair using low level laser therapy (688 nm and 785 nm) morphologic study in capuchin monkeys

The aim of this study was to evaluate the hypothesis that low-level laser therapy (LLLT) 688 nm and 785 nm accelerate dentin barrier formation and repair process after traumatic pulp exposure. The sample consisted of 45 premolars of capuchin monkeys (Cebus apella) with pulp exposure Class V cavities. All premolars were treated with calcium hydroxide (Ca(OH)(2)), divided in groups of 15 teeth each, and analyzed on 7(th), 25(th), and 60(th) day. Group GI - only Ca(OH)(2), GIF- laser 688 nm, and GIII - laser 785 nm. Laser beam was used in single and punctual dose with the parameters: continuous, 688 nm and 785 nm wavelength, tip`s area of 0.00785 cm(2), power 50 mW, application time 20 s, dose 255 J/cm(2), energy 2 J. Teeth were capped with Ca(OH)(2), Ca(OH)(2) cement and restored with amalgam. All groups presented pulp repair. On 25(th) day the thickness of the formed dentin barrier was different between the groups GI and GII (p < 0.05) and between groups GI and GIII (p < 0.01). On 60(th) day there was difference between GI and GIII (p < 0.01). It may be concluded that, LLLT 688 nm and 785 nm accelerated dentin barrier formation and consequently pulp repair process, with best results using infrared laser 785 nm. (c) 2009 by Astro Ltd. Published exclusively by WLLEY-VCH Verlag GmbH & Co. KGaA

TCA Evaluation : Lab Measurements, Modelling and System Simulations

The study reported here is part of a large project for evaluation of the Thermo-Chemical Accumulator (TCA), a technology under development by the Swedish company ClimateWell AB. The studies concentrate on the use of the technology for comfort cooling. This report concentrates on measurements in the laboratory, modelling and system simulation. The TCA is a three-phase absorption heat pump that stores energy in the form of crystallised salt, in this case Lithium Chloride (LiCl) with water being the other substance. The process requires vacuum conditions as with standard absorption chillers using LiBr/water. Measurements were carried out in the laboratories at the Solar Energy Research Center SERC, at Högskolan Dalarna as well as at ClimateWell AB. The measurements at SERC were performed on a prototype version 7:1 and showed that this prototype had several problems resulting in poor and unreliable performance. The main results were that: there was significant corrosion leading to non-condensable gases that in turn caused very poor performance; unwanted crystallisation caused blockages as well as inconsistent behaviour; poor wetting of the heat exchangers resulted in relatively high temperature drops there. A measured thermal COP for cooling of 0.46 was found, which is significantly lower than the theoretical value. These findings resulted in a thorough redesign for the new prototype, called ClimateWell 10 (CW10), which was tested briefly by the authors at ClimateWell. The data collected here was not large, but enough to show that the machine worked consistently with no noticeable vacuum problems. It was also sufficient for identifying the main parameters in a simulation model developed for the TRNSYS simulation environment, but not enough to verify the model properly. This model was shown to be able to simulate the dynamic as well as static performance of the CW10, and was then used in a series of system simulations. A single system model was developed as the basis of the system simulations, consisting of a CW10 machine, 30 m2 flat plate solar collectors with backup boiler and an office with a design cooling load in Stockholm of 50 W/m2, resulting in a 7.5 kW design load for the 150 m2 floor area. Two base cases were defined based on this: one for Stockholm using a dry cooler with design cooling rate of 30 kW; one for Madrid with a cooling tower with design cooling rate of 34 kW. A number of parametric studies were performed based on these two base cases. These showed that the temperature lift is a limiting factor for cooling for higher ambient temperatures and for charging with fixed temperature source such as district heating. The simulated evacuated tube collector performs only marginally better than a good flat plate collector if considering the gross area, the margin being greater for larger solar fractions. For 30 m2 collector a solar faction of 49% and 67% were achieved for the Stockholm and Madrid base cases respectively. The average annual efficiency of the collector in Stockholm (12%) was much lower than that in Madrid (19%). The thermal COP was simulated to be approximately 0.70, but has not been possible to verify with measured data. The annual electrical COP was shown to be very dependent on the cooling load as a large proportion of electrical use is for components that are permanently on. For the cooling loads studied, the annual electrical COP ranged from 2.2 for a 2000 kWh cooling load to 18.0 for a 21000 kWh cooling load. There is however a potential to reduce the electricity consumption in the machine, which would improve these figures significantly. It was shown that a cooling tower is necessary for the Madrid climate, whereas a dry cooler is sufficient for Stockholm although a cooling tower does improve performance. The simulation study was very shallow and has shown a number of areas that are important to study in more depth. One such area is advanced control strategy, which is necessary to mitigate the weakness of the technology (low temperature lift for cooling) and to optimally use its strength (storage).

Association of Haplotypes in the CXCR2 Gene with Periodontitis in a Brazilian Population

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)