932 resultados para Surfaces de mortalité
Resumo:
Au cours du siècle dernier, nous avons pu observer une diminution remarquable de la mortalité dans toutes les régions du monde, en particulier dans les pays développés. Cette chute a été caractérisée par des modifications importantes quant à la répartition des décès selon l'âge, ces derniers ne se produisant plus principalement durant les premiers âges de la vie mais plutôt au-delà de l'âge de 65 ans. Notre étude s'intéresse spécifiquement au suivi fin et détaillé des changements survenus dans la distribution des âges au décès chez les personnes âgées. Pour ce faire, nous proposons une nouvelle méthode de lissage non paramétrique souple qui repose sur l'utilisation des P-splines et qui mène à une expression précise de la mortalité, telle que décrite par les données observées. Les résultats de nos analyses sont présentés sous forme d'articles scientifiques, qui s'appuient sur les données de la Human Mortality Database, la Base de données sur la longévité canadienne et le Registre de la population du Québec ancien reconnues pour leur fiabilité. Les conclusions du premier article suggèrent que certains pays à faible mortalité auraient récemment franchi l'ère de la compression de la mortalité aux grands âges, ère durant laquelle les décès au sein des personnes âgées tendent à se concentrer dans un intervalle d'âge progressivement plus court. En effet, depuis le début des années 1990 au Japon, l'âge modal au décès continue d'augmenter alors que le niveau d'hétérogénéité des durées de vie au-delà de cet âge demeure inchangé. Nous assistons ainsi à un déplacement de l'ensemble des durées de vie adultes vers des âges plus élevés, sans réduction parallèle de la dispersion de la mortalité aux grands âges. En France et au Canada, les femmes affichent aussi de tels développements depuis le début des années 2000, mais le scénario de compression de la mortalité aux grands âges est toujours en cours chez les hommes. Aux États-Unis, les résultats de la dernière décennie s'avèrent inquiétants car pour plusieurs années consécutives, l'âge modal au décès, soit la durée de vie la plus commune des adultes, a diminué de manière importante chez les deux sexes. Le second article s'inscrit dans une perspective géographique plus fine et révèle que les disparités provinciales en matière de mortalité adulte au Canada entre 1930 et 2007, bien décrites à l'aide de surfaces de mortalité lissées, sont importantes et méritent d'être suivies de près. Plus spécifiquement, sur la base des trajectoires temporelles de l'âge modal au décès et de l'écart type des âges au décès situés au-delà du mode, les différentiels de mortalité aux grands âges entre provinces ont à peine diminué durant cette période, et cela, malgré la baisse notable de la mortalité dans toutes les provinces depuis le début du XXe siècle. Également, nous constatons que ce sont précisément les femmes issues de provinces de l'Ouest et du centre du pays qui semblent avoir franchi l'ère de la compression de la mortalité aux grands âges au Canada. Dans le cadre du troisième et dernier article de cette thèse, nous étudions la longévité des adultes au XVIIIe siècle et apportons un nouvel éclairage sur la durée de vie la plus commune des adultes à cette époque. À la lumière de nos résultats, l'âge le plus commun au décès parmi les adultes canadiens-français a augmenté entre 1740-1754 et 1785-1799 au Québec ancien. En effet, l'âge modal au décès est passé d'environ 73 ans à près de 76 ans chez les femmes et d'environ 70 ans à 74 ans chez les hommes. Les conditions de vie particulières de la population canadienne-française à cette époque pourraient expliquer cet accroissement.
Resumo:
Mémoire numérisé par la Direction des bibliothèques de l'Université de Montréal.
Resumo:
Mémoire numérisé par la Direction des bibliothèques de l'Université de Montréal.
Resumo:
This paper is concerned with the surface profiles of a strip after rigid bodies with serrated (saw-teeth) surfaces indent the strip and are subsequently removed. Plane-strain conditions are assumed. This has application in roughness transfer of final metal forming process. The effects of the semi-angle of the teeth, the depth of indentation and the friction on the contact surface on the profile are considered.
Resumo:
Pollutants originating with roof runoff can have a significant impact to urban stormwater quality. This signifies the importance of understanding pollutant processes on roof surfaces. Additionally, knowledge of pollutant processes on roof surfaces is important as roofs are used as the primary catchment surface for domestic rainwater harvesting. In recent years, rainwater harvesting has become one of the primary sustainable water management techniques to counteract the growing demand for potable water. Similar to all impervious services, pollutants associated with roof runoff undergo two primary processes: build-up and wash-off. The knowledge relating to these processes is limited. This paper presents outcomes of an in-depth research study into pollutant build-up and wash-off for roof surfaces. The knowledge will be important in order to develop appropriate strategies to safeguard rainwater users from possible health risks.
Resumo:
The validation of Computed Tomography (CT) based 3D models takes an integral part in studies involving 3D models of bones. This is of particular importance when such models are used for Finite Element studies. The validation of 3D models typically involves the generation of a reference model representing the bones outer surface. Several different devices have been utilised for digitising a bone’s outer surface such as mechanical 3D digitising arms, mechanical 3D contact scanners, electro-magnetic tracking devices and 3D laser scanners. However, none of these devices is capable of digitising a bone’s internal surfaces, such as the medullary canal of a long bone. Therefore, this study investigated the use of a 3D contact scanner, in conjunction with a microCT scanner, for generating a reference standard for validating the internal and external surfaces of a CT based 3D model of an ovine femur. One fresh ovine limb was scanned using a clinical CT scanner (Phillips, Brilliance 64) with a pixel size of 0.4 mm2 and slice spacing of 0.5 mm. Then the limb was dissected to obtain the soft tissue free bone while care was taken to protect the bone’s surface. A desktop mechanical 3D contact scanner (Roland DG Corporation, MDX 20, Japan) was used to digitise the surface of the denuded bone. The scanner was used with the resolution of 0.3 × 0.3 × 0.025 mm. The digitised surfaces were reconstructed into a 3D model using reverse engineering techniques in Rapidform (Inus Technology, Korea). After digitisation, the distal and proximal parts of the bone were removed such that the shaft could be scanned with a microCT (µCT40, Scanco Medical, Switzerland) scanner. The shaft, with the bone marrow removed, was immersed in water and scanned with a voxel size of 0.03 mm3. The bone contours were extracted from the image data utilising the Canny edge filter in Matlab (The Mathswork).. The extracted bone contours were reconstructed into 3D models using Amira 5.1 (Visage Imaging, Germany). The 3D models of the bone’s outer surface reconstructed from CT and microCT data were compared against the 3D model generated using the contact scanner. The 3D model of the inner canal reconstructed from the microCT data was compared against the 3D models reconstructed from the clinical CT scanner data. The disparity between the surface geometries of two models was calculated in Rapidform and recorded as average distance with standard deviation. The comparison of the 3D model of the whole bone generated from the clinical CT data with the reference model generated a mean error of 0.19±0.16 mm while the shaft was more accurate(0.08±0.06 mm) than the proximal (0.26±0.18 mm) and distal (0.22±0.16 mm) parts. The comparison between the outer 3D model generated from the microCT data and the contact scanner model generated a mean error of 0.10±0.03 mm indicating that the microCT generated models are sufficiently accurate for validation of 3D models generated from other methods. The comparison of the inner models generated from microCT data with that of clinical CT data generated an error of 0.09±0.07 mm Utilising a mechanical contact scanner in conjunction with a microCT scanner enabled to validate the outer surface of a CT based 3D model of an ovine femur as well as the surface of the model’s medullary canal.
Resumo:
To enhance and regulate cell affinity for poly (l-lactic acid) (PLLA) based materials, two hydrophilic ligands, poly (ethylene glycol) (PEG) and poly (l-lysine) (PLL), were used to develop triblock copolymers: methoxy-terminated poly (ethylene glycol)-block-poly (l-lactide)-block-poly (l-lysine) (MPEG-b-PLLA-b-PLL) in order to regulate protein absorption and cell adhesion. Bone marrow stromal cells (BMSCs) were cultured on different composition of MPEG-b-PLLA-b-PLL copolymer films to determine the effect of modified polymer surfaces on BMSC attachment. To understand the molecular mechanism governing the initial cell adhesion on difference polymer surfaces, the mRNA expression of 84 human extracellular matrix (ECM) and adhesion molecules was analysed using quantitative reverse transcriptase polymerase chain reaction (qRT-PCR). It was found that down regulation of adhesion molecules was responsible for the impaired BMSC attachment on PLLA surface. MPEG-b-PLLA-b-PLL copolymer films improved significantly the cell adhesion and cytoskeleton expression by upregulation of relevant molecule genes significantly. Six adhesion genes (CDH1, ITGL, NCAM1, SGCE, COL16A1, and LAMA3) were most significantly influenced by the modified PLLA surfaces. In summary, polymer surfaces altered adhesion molecule gene expression of BMSCs, which consequently regulated cell initial attachment on modified PLLA surfaces.
Resumo:
Purpose: In the present work we consider our (in progress) spectroscopy study of zinc and iron phosphates under the influence external high pressure to determine zinc ion change coordination from tetrahedral to octahedral (or hexahedral) structure.----- Design/methodology/approach: The standard equipment is the optical high pressure cell with diamond (DAC). The DAC is assembled and then vibrational or electronic spectra are collected by mounting the cell in an infrared, Raman, EXAFS or UV-visible spectrometer.----- Findings: Mechanism by which zinc and iron methaphosphate material is transformed to glassy meta-phosphate is enhancing mechanical properties of tribofilm. The two decades of intensive study demonstrates that Zn (II) and Fe (III) ions participate to cross-link network under friction, hardening the phosphate.----- Research limitations/implications: Transition metal atoms with d orbital have flexible coordination numbers, for example zinc acts as a cross-linking agent increasing hardness, by changing coordination from tetrahedral to octahedral. Perhaps the external pressure effect on the [Zn–(O-P-)4 ] complex causes a transformation to an [Zn –(O-P-)6] grouping.----- Originality/value: This paper analyses high-pressure spectroscopy which has been applied for the investigation of 3D transition metal ions in solids. When studying pressure effects on coordination compounds structure, we can expect changes in ground electronic state (spin-crossovers), electronic spectra due to structural distortions (piezochromism), and changes in the ligand field causing shifts in the electronic transitions.
Resumo:
In many countries the calculation of habitable dwelling surface is characterised by a chaotic variety of calculation variants hardly comprehensible for the end user - sometimes not even reproducible for the expert. Therefore dossiers were analysed on the basis of a random choice in order to determine the method according to which the habitable dwelling surface was measured and to find out wether customers can scrutinize the calculations. The paper compares Sydney and Munich, where in both cases property prices are situated at the high end of the market