Fat Substitutes In Processing Of Sausages Using Piramutaba Waste.

The aim of this study was to evaluate fat substitute in processing of sausages prepared with surimi of waste from piramutaba filleting. The formulation ingredients were mixed with the fat substitutes added according to a fractional planning 2(4-1), where the independent variables, manioc starch (Ms), hydrogenated soy fat (F), texturized soybean protein (Tsp) and carrageenan (Cg) were evaluated on the responses of pH, texture (Tx), raw batter stability (RBS) and water holding capacity (WHC) of the sausage. Fat substitutes were evaluated in 11 formulations and the results showed that the greatest effects on the responses were found to Ms, F and Cg, being eliminated from the formulation Tsp. To find the best formulation for processing piramutaba sausage was made a complete factorial planning of 2(3) to evaluate the concentrations of fat substitutes in an enlarged range. The optimum condition found for fat substitutes in the sausages formulation were carrageenan (0.51%), manioc starch (1.45%) and fat (1.2%).

Pollen substitutes increase honey bee haemolymph protein levels as much as or more than does pollen

Adequate substitutes for pollen are necessary for maintaining healthy bee colonies during periods of pollen dearth, but testing them objectively is both time consuming and expensive. We compared two commercial diets with bee collected pollen and acacia pod flour (used by beekeepers in some parts of Brazil) by measuring their effect on haemolymph protein contents of young bees exclusively fed on these diets, which is a fast and inexpensive assay. The commercial diets included a new, non-soy-based, pollen substitute diet (named Feed-Bee (R)) and a soy-based diet, named Bee-Pro (R). The diets were each given in patty form to groups of 100 Africanized honey bees in hoarding cages, maintained and fed from emergence until six days of age. Sucrose, in the form of sugar syrup, was used as a protein free control. Feed-Bee (R), Bee-Pro (R), pollen and acacia pod flour diets increased protein titers in the haemolymph by factors of 2.65, 2.51, 1.76 and 1.69, respectively, over protein titers in bees fed only sucrose solution. The bees fed Feed-Bee (R) and Bee-Pro (R) had their haemolymph significantly enriched in protein compared to the controls and those fed acacia pod flour and to titers slightly higher than those fed pollen. All four proteinaceous diets were significantly superior to sucrose alone.

Intra- and interspecific mineral composition variability of commercial instant coffees and coffee substitutes: contribution to mineral intake

The present paper reports the amount and estimated daily mineral intake of nine elements (Ca, Mg, K, Na, P, Fe, Mn, Cr and Ni) in commercial instant coffees and coffee substitutes (n = 49). Elements were quantified by high-resolution continuum source flame (HR-CS-FAAS) and graphite furnace (HR-CS-GFAAS) atomic absorption spectrometry, while phosphorous was evaluated by a standard vanadomolybdophosphoric acid colorimetric method. Instant coffees and coffee substitutes are rich in K, Mg and P (>100 mg/100 g dw), contain Na, Ca and Fe in moderate amounts (>1 mg/100 g), and trace levels of Cr and Ni. Among the samples analysed, plain instant coffees are richer in minerals (p < 0.001), except for Na and Cr. Blends of coffee substitutes (barley, malt, chicory and rye) with coffee (20–66%) present intermediate amounts, while lower quantities are found in substitutes without coffee, particularly in barley. From a nutritional point of view the results indicate that the mean ingestion of two instant beverages per day (total of 4 g instant powder), either with or without coffee, cannot be regarded as important sources of minerals to the human diet, although providing a supplementation of some minerals, particularly Mg and Mn in instant coffees. Additionally, and for authentication purposes, the correlations observed between some elements and the coffee percentage in the blends, with particular significance for Mg amounts, provides a potential tool for the estimation of coffee in substitute blends.

Experimental procedures for the identification of material properties of intervertebal disc - a contribution for the development of biomimetic substitutes for the nucleus pulposus

Tese de Doutoramento em Engenharia Mecânica.

New concepts for the design of dermal substitutes

Objectives: Skin can be partially regenerated after full thickness defects by collagen matrices, In this study, we identified the main limitations of induced regeneration aiming to improve the design of dermal matrices. Methods: Single mice received a 1 cm2, full thickness skin wound on the dorsum, which were grafted with collagen-GAG matrices or left ungrafted. The healing modulation induced by the collagen-GAG matrices was compared to spontaneous healing and to custom designed, bioactive, poly-N-Acetyl- Glucosamine (NAG) matrices. Wound staging was based on macroscopic, histological and immunhistochemical analysis on days 3, 7, 10 and 21 post wounding. Results: Cell density was higher in spontaneously granulating wounds compared to grafted wounds. While grafted wounds exhibited increased levels of cell proliferation on days 7 and 10, vascularity was dramatically reduced. NAG scaffolds accelerated both angiogenesis and wound re-epithelialization. Conclusions: Since slow integration and revascularization severely limit the engraftment of clinically used dermal scaffolds, the design of dermal matrices using bioactive materials represent the next step in skin regeneration.

Substituts épidermiques et dermo-épidermiques vivants pour le traitement des grands brûlés [Living epidermal and dermal substitutes for treatment of severely burned patients]

Epidermal and dermal cells can be multiplied in vitro using different techniques. Under particular conditions, the structure and the function of the original tissues are partly recreated. Autologous epidermal substitutes for wound coverage in deep burns are prepared in less than three weeks. Bilayered skin equivalents containing a dermal component are obtained by growing epidermal cells on a reconstructed dermal substitute or by juxtaposing stratified cultures of keratinocytes and fibroblasts. New technologies are required to optimise the nutrition of three-dimensional cultures of skin cells, which should lead to further progress in the area of skin reconstruction.

In-vitro testing of biofilm formation on infected bone grafts and bone substitutes

Background: Bacteria form biofilms on the surface of orthopaedic devices, causing persistent infections. Monitoring biofilm formation on bone grafts and bone substitutes is challenging due to heterogeneous surface characteristics. We analyzed various bone grafts and bone substitutes regarding their propensity for in-vitro biofilm formation caused by S. aureus and S. epidermidis. Methods: Beta-tricalciumphosphate (b-TCP, ChronOsTM), processed human spongiosa (TutoplastTM) and PMMA (PalacosTM) were investigated. PE was added as a growth control. As test strains S. aureus (ATCC 29213) and S. epidermidis RP62A (ATCC 35984) were used. Test materials were incubated with 105 cfu/ml. After 24 h, test materials were removed and washed, followed by a standardised sonication protocol. The resulting sonication fluid was plated and bacterial counts were enumerated and expressed as cfu/sample. Sonicated samples were transferred to a microcalorimeter (TA Instrument) and heat flow monitored over a 24 h period with a precision of 0.0001°C and a sensitiviy of 200 μW. Experiments were performed in triplicates to calculate the mean ± SD. One-way ANOVA analysis was used for statistical analysis. Results: Bacterial counts (log10 cfu/sample) were highest on b-TCP (S. aureus 7.67 ± 0.17; S. epidermidis 8.14 ± 0.05) while bacterial density (log10 cfu/surface) was highest on PMMA (S. aureus 6.12 ± 0.2, S. epidermidis 7.65 ± 0.13). Detection time for S. aureus biofilms was shorter for the porous materials (b-TCP and Tutoplast, p <0.001) compared to the smooth materials (PMMA and PE) with no differences between b-TCP and TutoplastTM (p >0.05) or PMMA and PE (p >0.05). In contrast, for S. epidermidis biofilms the detection time was different (p <0.001) between all materials except between Tutoplast and PE (p >0.05). Conclusion: Our results demonstrate biofilm formation with both strains on all tested materials. Microcalorimetry was able to detect quantitatively the amount of biofilm. Further studies are needed to see whether calorimetry is a suitable tool also to monitor approaches to prevent and treat infections associated with bone grafts and bone substitutes.

Complements and substitutes in multilateral assignment markets

[cat] En aquest treball provo que, en mercats d’assignació amb més de dos costats, agents de diferents sectors poden no ser complementaris mentre que agents del mateix sector poden no ser substituts. Shapley (1962) va provar que això mai pot succeïr quan el mercat d’assignació només té dos costats. No obstant, demostro que existeixen condicions suficients que garanteixen la substitutabilitat i la complementarietat entre agents en aquests tipus de mercats. A més, provo que, quan els béns al mercat son homogenis, el resultat de Shapley (1962) es manté.

Biofilm formation on bone grafts and bone graft substitutes: comparison of different materials by a standard in vitro test and microcalorimetry.

We analyzed the initial adhesion and biofilm formation of Staphylococcus aureus (ATCC 29213) and S. epidermidis RP62A (ATCC 35984) on various bone grafts and bone graft substitutes under standardized in vitro conditions. In parallel, microcalorimetry was evaluated as a real-time microbiological assay in the investigation of biofilm formation and material science research. The materials beta-tricalcium phosphate (beta-TCP), processed human spongiosa (Tutoplast) and poly(methyl methacrylate) (PMMA) were investigated and compared with polyethylene (PE). Bacterial counts (log(10) cfu per sample) were highest on beta-TCP (S. aureus 7.67 +/- 0.17; S. epidermidis 8.14 +/- 0.05) while bacterial density (log(10) cfu per surface) was highest on PMMA (S. aureus 6.12 +/- 0.2, S. epidermidis 7.65 +/- 0.13). Detection time for S. aureus biofilms was shorter for the porous materials (beta-TCP and processed human spongiosa, p < 0.001) compared to the smooth materials (PMMA and PE), with no differences between beta-TCP and processed human spongiosa (p > 0.05) or PMMA and PE (p > 0.05). In contrast, for S. epidermidis biofilms the detection time was different (p < 0.001) between all materials except between processed human spongiosa and PE (p > 0.05). The quantitative analysis by quantitative culture after washing and sonication of the material demonstrated the importance of monitoring factors like specific surface or porosity of the test materials. Isothermal microcalorimetry proved to be a suitable tool for an accurate, non-invasive and real-time microbiological assay, allowing the detection of bacterial biomass without removing the biofilm from the surface.

Complements and substitutes in multilateral assignment markets

[cat] En aquest treball provo que, en mercats d’assignació amb més de dos costats, agents de diferents sectors poden no ser complementaris mentre que agents del mateix sector poden no ser substituts. Shapley (1962) va provar que això mai pot succeïr quan el mercat d’assignació només té dos costats. No obstant, demostro que existeixen condicions suficients que garanteixen la substitutabilitat i la complementarietat entre agents en aquests tipus de mercats. A més, provo que, quan els béns al mercat son homogenis, el resultat de Shapley (1962) es manté.

Wound-healing gene family expression differences between fetal and foreskin cells used for bioengineered skin substitutes.

For tissue engineering, several cell types and tissues have been proposed as starting material. Allogenic skin products available for therapeutic usage are mostly developed with cell culture and with foreskin tissue of young individuals. Fetal skin cells offer a valuable solution for effective and safe tissue engineering for wounds due to their rapid growth and simple cell culture. By selecting families of genes that have been reported to be implicated in wound repair and particularly for scarless fetal wound healing including transforming growth factor-beta (TGF-beta) superfamily, extracellular matrix, and nerve/angiogenesis growth factors, we have analyzed differences in their expression between fetal skin and foreskin cells, and the same passages. Of the five TGF-beta superfamily genes analyzed by real-time reverse transcription-polymerase chain reaction, three were found to be significantly different with sixfold up-regulated for TGF-beta2, and 3.8-fold for BMP-6 in fetal cells, whereas GDF-10 was 11.8-fold down-regulated. For nerve growth factors, midkine was 36-fold down-regulated in fetal cells, and pleiotrophin was 4.76-fold up-regulated. We propose that fetal cells present technical and therapeutic advantages compared to foreskin cells for effective cell-based therapy for wound management, and overall differences in gene expression could contribute to the degree of efficiency seen in clinical use with these cells.

Mangaba (Hancornia speciosa Gomez) ice cream prepared with fat replacers and sugar substitutes

The effect of replacing shortening and sugar on the physical and chemical properties of mangaba ice cream and its acceptability were evaluated. Ice cream formulations were tested with the following fat replacers: Selecta Light, Litesse, and Dairy Lo and the following sugar substitutes: Lactitol and Splenda. All formulations were subjected to physical, chemical, and microbiological analyses and evaluated by acceptability tests. In the sensory analysis, it was observed a larger acceptance of the formulations containing Selecta Light (SL) and the combination of Litesse, Lactiol, and Splenda (LLS). The largest reduction in total energetic value (50%) was observed in the formulation LLS. The use of fat and/or sugar substitutes caused a reduction in the air incorporation (overrun) and affected viscosity. The highest melting speed was observed in the formulation with Dairy-Lo, Lactitol, and Splenda. All formulations showed good levels of global acceptability and appearance. The substitution of shortening for fat replacers caused a reduction in air incorporation and changes in ice-cream viscosity. The low-fat mangaba ice-cream elaborated with Selecta Light was the best formulation in terms of viscosity and air incorporation when compared with the control. It also showed a good level of acceptability and low fat content.

The level of compliance with the International Code of marketing of breast-milk substitutes: does it matter to stock markets?

The present paper explores, theoretically, and empirically, whether compliance with the International Code of marketing of breast-milk substitutes impacts on financial performance measured by stock markets. The empirical analysis, which considers a 20-year period, shows that stock markets are indifferent to the level of compliance by manufacturers with the International Code. Two important issues emerge from this result. Based on our finding that financial performance as measured by stock markets cannot explain the level of compliance, the first issue refers to what alternative types of mechanisms drive manufacturers who comply the least with voluntary codes such as the International Code. Conversely, from our finding that stock markets do not reward the most compliant, the second issue raised is an inherent weakness of stock markets to fully incorporate social and environmental values.