Design of a state observer using decay rate LMI constraints for fault detection in mechanical systems

Nowadays, one of the most important concerns for many companies is to maintain the operation of their systems without sudden equipment break down. Because of this, new techniques for fault detection and location in mechanical systems subject to dynamic loads have been developed. This paper studies of the influence of the decay rate in the design of state observers using LMI for fault detection in mechanical systems. This influence is analyzed by the performance index proposed by Huh and Stein for the condition of a state observer. An example is presented to illustrate the methodology discussed.

A Luenberger state observer for stator resistance estimation in sensorless induction motor drives

The primary objective of this paper is to elimination of the problem of sensitivity to parameter variation of induction motor drive. The proposed sensorless strategy is based on an algorithm permitting a better simultaneous estimation of the rotor speed and the stator resistance including an adaptive mechanism based on the lyaponov theory. To study the reliability and the robustness of the sensorless technique to abnormal operations, some simulation tests have been performed under several cases. The proposed sensorless vector control scheme showed a good performance behavior in the transient and steady states, with an excellent disturbance rejection of the load torque. © 2013 Praise Worthy Prize S.r.l. - All rights reserved.

Stability analysis and observer design for discrete-time SEIR epidemic models

This paper applies Micken's discretization method to obtain a discrete-time SEIR epidemic model. The positivity of the model along with the existence and stability of equilibrium points is discussed for the discrete-time case. Afterwards, the design of a state observer for this discrete-time SEIR epidemic model is tackled. The analysis of the model along with the observer design is faced in an implicit way instead of obtaining first an explicit formulation of the system which is the novelty of the presented approach. Moreover, some sufficient conditions to ensure the asymptotic stability of the observer are provided in terms of a matrix inequality that can be cast in the form of a LMI. The feasibility of the matrix inequality is proved, while some simulation examples show the operation and usefulness of the observer.

Variable structure controller and observer applied to induction machine

This work will propose the control of an induction machine in field coordinates with imposed stator current based on theory of variable structure control and sliding mode. We describe the model of an induction machine in field coordinates with imposed stator current and we show the design of variable structure control and sliding mode to get a desirable dynamic performance of that plant. To estimate the inaccessible states we will use a state observer (estimator) based on field coordinates induction machine. We will present the results of simulations in any operation condition (start, speed reversal and load) and with parameters variation of the machine compared to a PI control scheme.

Sensor fault-resilient control of interior permanent-magnet synchronous motor drives

In a conventional ac motor drive using field-oriented control, a dc-link voltage, speed, and at least two current sensors are required. Hence, in the event of sensor failure, the performance of the drive system can be severely compromised. This paper presents a sensor fault-tolerant control strategy for interior permanent-magnet synchronous motor (IPMSM) drives. Three independent observers are proposed to estimate the speed, dc-link voltage, and currents of the machine. If a sensor fault is detected, the drive system isolates the faulty sensor while retaining the remaining functional ones. The signal is then acquired from the corresponding observer in order to maintain the operation of the drive system. The experimental results provided verify the effectiveness of the proposed approach.

A gray-box neural network-based model identification and fault estimation scheme for nonlinear dynamic systems

A novel gray-box neural network model (GBNNM), including multi-layer perception (MLP) neural network (NN) and integrators, is proposed for a model identification and fault estimation (MIFE) scheme. With the GBNNM, both the nonlinearity and dynamics of a class of nonlinear dynamic systems can be approximated. Unlike previous NN-based model identification methods, the GBNNM directly inherits system dynamics and separately models system nonlinearities. This model corresponds well with the object system and is easy to build. The GBNNM is embedded online as a normal model reference to obtain the quantitative residual between the object system output and the GBNNM output. This residual can accurately indicate the fault offset value, so it is suitable for differing fault severities. To further estimate the fault parameters (FPs), an improved extended state observer (ESO) using the same NNs (IESONN) from the GBNNM is proposed to avoid requiring the knowledge of ESO nonlinearity. Then, the proposed MIFE scheme is applied for reaction wheels (RW) in a satellite attitude control system (SACS). The scheme using the GBNNM is compared with other NNs in the same fault scenario, and several partial loss of effect (LOE) faults with different severities are considered to validate the effectiveness of the FP estimation and its superiority.

Algoritmos Genéticos para Síntese de Filtros Aplicados em Controle por Modo Deslizante.

Nesta Dissertação propõe-se a aplicação de algoritmos genéticos para a síntese de filtros para modular sinais de controladores a estrutura variável e modo deslizante. A modulação do sinal de controle reduz a amplitude do sinal de saída e, consequentemente, pode reduzir o consumo de energia para realizar o controle e o chattering. Esses filtros também são aplicados em sistemas que possuem incertezas paramétricas nos quais nem todas as variáveis de estado são medidas. Nesses sistemas, as incertezas nos parâmetros podem impedir que seus estados sejam estimados com precisão por observadores. A síntese desses filtros necessita da obtenção da envoltória, que é o valor máximo da norma de cada resposta impulsiva admissível no sistema. Após este passo, é sintetizado um filtro que seja um majorante para a envoltória. Neste estudo, três métodos de busca da envoltória por algoritmos genéticos foram criados. Um dos métodos é o preferido, pois apresentou os melhores resultados e o menor tempo computacional.

Posicionamento dinâmico utilizando controle a estrutura variável e servovisão.

Neste trabalho é apresentado o desenvolvimento de um sistema de posicionamento dinâmico para uma pequena embarcação baseado em controle a estrutura variável com realimentação por visão computacional. Foram investigadas, na literatura, diversas técnicas desenvolvidas e escolheu-se o controle a estrutura variável devido, principalmente, ao modo de acionamento dos propulsores presentes no barco utilizado para os experimentos. Somando-se a isto, foi considerada importante a robustez que a técnica de controle escolhida apresenta, pois o modelo utilizado conta com incerteza em sua dinâmica. É apresentado ainda o projeto da superfície de deslizamento para realizar o controle a estrutura variável. Como instrumento de medição optou-se por utilizar técnicas de visão computacional em imagens capturadas a partir de uma webcam. A escolha por este tipo de sistema deve-se a alta precisão das medições aliada ao seu baixo custo. São apresentadas simulações e experimentos com controle a estrutura variável em tempo discreto utilizando a integral do erro da posição visando eliminar o erro em regime. Para realizar o controle que demanda o estado completo, são comparados quatro estimadores de estado realizados em tempo discreto: derivador aproximado; observador assintótico com uma frequência de amostragem igual a da câmera; observador assintótico com uma frequência de amostragem maior que a da câmera; e filtro de Kalman.

Designing output-feedback predictive controllers by reverse-engineering existing LTI controllers

An approach to designing a constrained output-feedback predictive controller that has the same small-signal properties as a pre-existing output-feedback linear time invariant controller is proposed. Systematic guidelines are proposed to select an appropriate (non-unique) realization of the resulting state observer. A method is proposed to transform a class of offset-free reference tracking controllers into the combination of an observer, steady-state target calculator and predictive controller. The procedure is demonstrated with a numerical example. © 2013 IEEE.

Control of uncertain compartmental systems

Os sistemas compartimentais são frequentemente usados na modelação de diversos processos em várias áreas, tais como a biomedicina, ecologia, farmacocinética, entre outras. Na maioria das aplicações práticas, nomeadamente, aquelas que dizem respeito à administração de drogas a pacientes sujeitos a cirurgia, por exemplo, a presença de incertezas nos parâmetros do sistema ou no estado do sistema é muito comum. Ao longo dos últimos anos, a análise de sistemas compartimentais tem sido bastante desenvolvida na literatura. No entanto, a análise da sensibilidade da estabilidade destes sistemas na presença de incertezas tem recebido muito menos atenção. Nesta tese, consideramos uma lei de controlo por realimentação do estado com restrições de positividade e analisamos a sua robustez quando aplicada a sistemas compartimentais lineares e invariantes no tempo com incertezas nos parâmetros. Além disso, para sistemas lineares e invariantes no tempo com estado inicial desconhecido, combinamos esta lei de controlo com um observador do estado e a robustez da lei de controlo resultante também é analisada. O controlo do bloqueio neuromuscular por meio da infusão contínua de um relaxante muscular pode ser modelado como um sistema compartimental de três compartimentos e tem sido objecto de estudo por diversos grupos de investigação. Nesta tese, os nossos resultados são aplicados a este problema de controlo e são fornecidas estratégias para melhorar os resultados obtidos.

Contact Sensing: A Sequential Decision Approach to Sensing Manipulation Contact

This paper describes a new statistical, model-based approach to building a contact state observer. The observer uses measurements of the contact force and position, and prior information about the task encoded in a graph, to determine the current location of the robot in the task configuration space. Each node represents what the measurements will look like in a small region of configuration space by storing a predictive, statistical, measurement model. This approach assumes that the measurements are statistically block independent conditioned on knowledge of the model, which is a fairly good model of the actual process. Arcs in the graph represent possible transitions between models. Beam Viterbi search is used to match measurement history against possible paths through the model graph in order to estimate the most likely path for the robot. The resulting approach provides a new decision process that can be use as an observer for event driven manipulation programming. The decision procedure is significantly more robust than simple threshold decisions because the measurement history is used to make decisions. The approach can be used to enhance the capabilities of autonomous assembly machines and in quality control applications.

Sistema híbrido para detecção e diagnóstico de falhas em sistemas dinâmicos

The industries are getting more and more rigorous, when security is in question, no matter is to avoid financial damages due to accidents and low productivity, or when it s related to the environment protection. It was thinking about great world accidents around the world involving aircrafts and industrial process (nuclear, petrochemical and so on) that we decided to invest in systems that could detect fault and diagnosis (FDD) them. The FDD systems can avoid eventual fault helping man on the maintenance and exchange of defective equipments. Nowadays, the issues that involve detection, isolation, diagnose and the controlling of tolerance fault are gathering strength in the academic and industrial environment. It is based on this fact, in this work, we discuss the importance of techniques that can assist in the development of systems for Fault Detection and Diagnosis (FDD) and propose a hybrid method for FDD in dynamic systems. We present a brief history to contextualize the techniques used in working environments. The detection of fault in the proposed system is based on state observers in conjunction with other statistical techniques. The principal idea is to use the observer himself, in addition to serving as an analytical redundancy, in allowing the creation of a residue. This residue is used in FDD. A signature database assists in the identification of system faults, which based on the signatures derived from trend analysis of the residue signal and its difference, performs the classification of the faults based purely on a decision tree. This FDD system is tested and validated in two plants: a simulated plant with coupled tanks and didactic plant with industrial instrumentation. All collected results of those tests will be discussed

Analise de desempenho de observadores de estado robustos na localizacao de falhas

The state observers can reconstruct and monitor unmeasurable states. A new concept of fault detection and isolation using state observers is presented. The method selects the parameters from components that may fail during the process and constructs optimized robust observers. To isolate component failures via robust observation, a bank of detection observers is organized, in which each observer is only sensitive to one specified component failure while robust to all other component failures. This paper analyzes the performance of transient and steady-state behavior of the state observer.

Utilização de modelos de falhas e observadores de estado em estruturas reticuladas

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Monitoramento da Integridade Estrutural de Sistemas Mecânicos via Observador de Estado Modal

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)