Design gráfico : análise da relação com a performance da micro e pequena empresa

O design possui um papel central nos negócios, participando de forma crucial no intercambio cultural e econômico da sociedade. Uma das competências do profissional de design gráfico é o desenvolvimento da Identidade Visual Corporativa (IVC). Ela tem como função definir visualmente o perfil de uma empresa, configurando-se, assim, como um composto mercadológico de fundamental importância para diferenciação das organizações, possuindo um importante papel para o crescimento das micro e pequenas empresas (MPEs). O objetivo desta pesquisa é verificar de que forma os gestores de MPEs percebem a atuação do design gráfico sobre a performance do seu negócio, avaliada a partir da sua experiência com a IVC desenvolvida por um profissional de design e aplicada pela empresa em suas atividades. A pesquisa é aplicada, em relação a sua finalidade, e exploratória, quanto ao seu objetivo. Sua condução se deu a partir de pesquisa bibliográfica, entrevista semiestruturada com os gestores das MPEs investigadas e pesquisa documental em materiais fornecidos pelos sujeitos da pesquisa, realizando-se, desta forma, uma triangulação metodológica a fim de contribuir para o exame do fenômeno. Como estratégia de investigação foi utilizado o estudo de casos múltiplos, realizado com 7 (sete) MPEs que haviam incorporado sua IVC há pelo menos 2 (dois) anos, dos setores de comércio e serviço, localizadas nos municípios de Vitória, Vila Velha, Serra ou Cariacica. Os dados coletados foram analisados por meio da Análise de Conteúdo, com base nas etapas descritas por Bardin (1977) e Laville (1999), distribuindo as unidades de análise (frases e parágrafos) nas categorias desenvolvidas: Motivação, Integração da IVC, Gestão da IVC, Relevância da IVC, IVC e Performance e Expressão Visual. A análise utilizou a abordagem quantitativa, realizada por meio da técnica de percentagem, e qualitativa, com maior ênfase na última, onde foram analisadas as categorias e seus elementos, assim como as relações entre elas, buscando extrair os significados construídos. Desta forma, foi possível verificar que a maior parte dos gestores das MPEs investigadas identificam que o design gráfico, por meio da IVC, contribui de forma positiva para a performance do seu negócio, proporcionando diferentes tipos de benefícios, dentre os mais citados foram: Identificação/Reconhecimento, Fortalecimento (solidez, estabilidade, profissionalismo), Novos Clientes, Imagem, Receptividade, Agregação de Valor para a Marca e Diferenciação.

Design gráfico : análise da relação com a performance da micro e pequena empresa

O design possui um papel central nos negócios, participando de forma crucial no intercambio cultural e econômico da sociedade. Uma das competências do profissional de design gráfico é o desenvolvimento da Identidade Visual Corporativa (IVC). Ela tem como função definir visualmente o perfil de uma empresa, configurando-se, assim, como um composto mercadológico de fundamental importância para diferenciação das organizações, possuindo um importante papel para o crescimento das micro e pequenas empresas (MPEs). O objetivo desta pesquisa é verificar de que forma os gestores de MPEs percebem a atuação do design gráfico sobre a performance do seu negócio, avaliada a partir da sua experiência com a IVC desenvolvida por um profissional de design e aplicada pela empresa em suas atividades. A pesquisa é aplicada, em relação a sua finalidade, e exploratória, quanto ao seu objetivo. Sua condução se deu a partir de pesquisa bibliográfica, entrevista semiestruturada com os gestores das MPEs investigadas e pesquisa documental em materiais fornecidos pelos sujeitos da pesquisa, realizando-se, desta forma, uma triangulação metodológica a fim de contribuir para o exame do fenômeno. Como estratégia de investigação foi utilizado o estudo de casos múltiplos, realizado com 7 (sete) MPEs que haviam incorporado sua IVC há pelo menos 2 (dois) anos, dos setores de comércio e serviço, localizadas nos municípios de Vitória, Vila Velha, Serra ou Cariacica. Os dados coletados foram analisados por meio da Análise de Conteúdo, com base nas etapas descritas por Bardin (1977) e Laville (1999), distribuindo as unidades de análise (frases e parágrafos) nas categorias desenvolvidas: Motivação, Integração da IVC, Gestão da IVC, Relevância da IVC, IVC e Performance e Expressão Visual. A análise utilizou a abordagem quantitativa, realizada por meio da técnica de percentagem, e qualitativa, com maior ênfase na última, onde foram analisadas as categorias e seus elementos, assim como as relações entre elas, buscando extrair os significados construídos. Desta forma, foi possível verificar que a maior parte dos gestores das MPEs investigadas identificam que o design gráfico, por meio da IVC, contribui de forma positiva para a performance do seu negócio, proporcionando diferentes tipos de benefícios, dentre os mais citados foram: Identificação/Reconhecimento, Fortalecimento (solidez, estabilidade, profissionalismo), Novos Clientes, Imagem, Receptividade, Agregação de Valor para a Marca e Diferenciação.

The application of Basel III in Portugal: previsions based on 2012 and 2013 banking balance-sheets

The Basel Committee on Banking Supervision (BCBS) introduced new regulations for banking supervision in December 2010, better known as Basel III recommendations that aimed at guaranteeing the solidity of banks worldwide and the mitigation of new banking crises risks. The European Union transposed these directives through the Credit Review Directives IV (CRD IV). Portugal adopted CRD IV by a new decree-law no. 157/2014, on 24 th October 2014, enforced from 24 th November 2014. While individual banks have been given the option of using the internal ratings based method, this study analyses the compliance levels of all Portuguese banking institutions using the standard method, also prescribed by BCBS. Our results show that out of thirteen banks on 31-12-2013 only five banks were in a comfortable position and the remaining eight could not reach the minimum requirements set up by BCBS for 1-1-2014.

Energy Harvesting for Autonomous Underwater Vehicles

In this study, energy production for autonomous underwater vehicles is investigated. This project is part of a bigger project called TURTLE. The autonomous vehicles perform oceanic researches at seabed for which they are intended to be kept operational underwater for several months. In order to ful l a long-term underwater condition, powerful batteries are combined with \micro- scale" energy production on the spot. This work tends to develop a system that generates power up to a maximum of 30 W. Latter energy harvesting structure consists basically of a turbine combined with a generator and low-power electronics to adjust the achieved voltage to a required battery charger voltage. Every component is examined separately hence an optimum can be de ned for all, and subsequently also an overall optimum. Di erent design parameters as e.g. number of blades, solidity ratio and cross-section area are compared for di erent turbines, in order to see what is the most feasible type. Further, a generator is chosen by studying how ux distributions might be adjusted to low velocities, and how cogging torque can be excluded by adapted designs. Low-power electronics are con gured in order to convert and stabilize heavily varying three-phase voltages to a constant, recti ed voltage which is usable for battery storage. Clearly, di erent component parameters as maximum power and torque are matched here to increase the overall power generation. Furthermore an overall maximum power is set up for achieving a maximum power ow at load side. Due to among others typical low velocities of about 0.1 to 0.5 m/s, and constructing limits of the prototype, the vast range of components is restricted to only a few that could be used. Hence, a helical turbine is combined in a direct drive mode to a coreless-stator axial- ux permanent-magnet generator, from which the output voltage is adjusted subsequently by a recti er, impedance matching unit, upconverter circuit and an overall control unit to regulate di erent component parameters. All these electronics are combined in a closed-loop design to involve positive feedback signals. Furthermore a theoretical con guration for the TURTLE vehicle is described in this work and a solution is proposed that might be implemented, for which several design tests are performable in a future study.

Measuring the efficiency in Spanish municipal refuse collection services

The objective of this study is to analyse the technical or productive efficiency ofthe refuse collection services in 75 municipalities located in the Spanish regionof Catalonia. The analysis has been carried out using various techniques. Firstly we have calculated a deterministic parametric frontier, then a stochastic parametric frontier, and finally, various non-parametric approaches (DEA and FDH). Concerning the results, these naturally differ according to the technique used to approach the frontier. Nevertheless, they have an appearance of solidity, at least with regard to the ordinal concordance among the indices of efficiency obtained by the different approaches, as is demonstrated by the statistical tests used. Finally, we have attempted to search for any relation existing between efficiency and the method (public or private) of managing the services. No significant relation was found between the type of management and efficiencyindices

Measuring the efficiency in Spanish municipal refuse collection services

The objective of this study is to analyse the technical or productive efficiency ofthe refuse collection services in 75 municipalities located in the Spanish regionof Catalonia. The analysis has been carried out using various techniques. Firstly we have calculated a deterministic parametric frontier, then a stochastic parametric frontier, and finally, various non-parametric approaches (DEA and FDH). Concerning the results, these naturally differ according to the technique used to approach the frontier. Nevertheless, they have an appearance of solidity, at least with regard to the ordinal concordance among the indices of efficiency obtained by the different approaches, as is demonstrated by the statistical tests used. Finally, we have attempted to search for any relation existing between efficiency and the method (public or private) of managing the services. No significant relation was found between the type of management and efficiencyindices

Computational and Experimental Analysis of Flow Field in the Diffusers of Centrifugal Compressors

Centrifugal compressors are widely used for example in process industry, oil and gas industry, in small gas turbines and turbochargers. In order to achieve lower consumption of energy and operation costs the efficiency of the compressor needs to be improve. In the present work different pinches and low solidity vaned diffusers were utilized in order to improve the efficiency of a medium size centrifugal compressor. In this study, pinch means the decrement of the diffuser flow passage height. First different geometries were analyzed using computational fluid dynamics. The flow solver Finflo was used to solve the flow field. Finflo is a Navier-Stokes solver. The solver is capable to solve compressible, incompressible, steady and unsteady flow fields. Chien's k-e turbulence model was used. One of the numerically investigated pinched diffuser and one low solidity vaned diffuser were studied experimentally. The overall performance of the compressor and the static pressure distribution before and after the diffuser were measured. The flow entering and leaving the diffuser was measured using a three-hole Cobra-probe and Kiel-probes. The pinch and the low solidity vaned diffuser increased the efficiency of the compressor. Highest isentropic efficiency increment obtained was 3\% of the design isentropic efficiency of the original geometry. It was noticed in the numerical results that the pinch made to the hub and the shroud wall was most beneficial to the operation of the compressor. Also the pinch made to the hub was better than the pinchmade to the shroud. The pinch did not affect the operation range of the compressor, but the low solidity vaned diffuser slightly decreased the operation range.The unsteady phenomena in the vaneless diffuser were studied experimentally andnumerically. The unsteady static pressure was measured at the diffuser inlet and outlet, and time-accurate numerical simulation was conducted. The unsteady static pressure showed that most of the pressure variations lay at the passing frequency of every second blade. The pressure variations did not vanish in the diffuser and were visible at the diffuser outlet. However, the amplitude of the pressure variations decreased in the diffuser. The time-accurate calculations showed quite a good agreement with the measured data. Agreement was very good at the design operation point, even though the computational grid was not dense enough inthe volute and in the exit cone. The time-accurate calculation over-predicted the amplitude of the pressure variations at high flow.

Sahayrityksen laajentamisen kannattavuus

Diplomityön tavoitteena oli selvittää sahayrityksen tuotantokapasiteetin laajentamisen taloudellisia edellytyksiä, rajoitteita ja seurauksia. Teoriaosassa määritellään ensimmäiseksi kasvukykyinen yritys, joka on kannattava, maksuvelvoitteista suoriutuva ja vakavarainen. Toiseksi analysoidaan, kuinka tuotantovolyymin kasvattaminen näkyy sahan taseessa käyttöomaisuuden ja käyttöpääoman kasvuna. Kolmanneksi tarkastellaan vieraan pääoman tarvetta ja pääomakustannusten vaikutusta kapasiteettilaajennuksen kannattavuuteen.Neljänneksi tarkastellaan tuotantokapasiteetin laajentamisen kannattavuutta, kun käyttöomaisuutta hankitaan vuokraamalla tai toimintoja ulkoistetaan. Teoriaosan lopuksi määritellään periaatteet, kuinka nopeasti yritys voi kasvattaa liiketoimintaa vaarantamatta maksuvalmiutta, vakavaraisuutta ja kannattavuutta. Empiriaosassa tutkitaan 22 suomalaisen sahan tillinpäätöstietoja vuodelta 2003 ja kuvataan, miten erot kokoluokassa vaikuttavat sahojen kustannus- ja taserakenteeseen.Taseen osalta mittakaavaetua ei ollut havaittavissa. Tuloslaskelman osalta mittakaavaetua saavutettiin henkilökulujen osalta sahoilla, joiden liikevaihto asettui välille 15 - 25 Meur. Muilta osin pääoma- ja kustannuserät joko kasvoivat vakioisesti tai vaihtelivat satunnaisesti. Maksuvalmius perustui sahatoimialalla pääasiassa ostovelkojen ja muun lyhytaikaisen vieraan pääoman käyttöön.

Ylisoonisen yksivaiheisen aksiaaliturbiinin suunnittelu

Tässä diplomityössä suunnitellaan yksivaiheisen turbiinin ylisooninen staattori ja alisooninen roottori, tulo-osa ja diffuusori. Työn alussa tarkastellaan aksiaaliturbiinin käyttökohteita ja teoriaa, jonka jälkeen esitetään suunnittelun perustana olevat menetelmät ja periaatteet. Perussuunnittelu tehdään Traupelinmenetelmällä WinAxtu 1.1 suunnitteluohjelmalla ja hyötysuhde arvioidaan lisäksiExcel-pohjaisella laskennalla. Ylisooninen staattori suunnitellaan perussuunnittelun tuloksiin perustuen, soveltamalla karakteristikoiden menetelmää suuttimen laajenevaan osaan ja pinta-alasuhteita suppenevaan osaan. Roottorin keskiviiva piirretään Sahlbergin menetelmällä ja siiven muoto määritetään A3K7 paksuusjakauman sekä tiheän siipihilan muotoilun periaatteita yhdistämällä. Tulo-osa suunnitellaan mahdollisimman jouhevaksi geometriatietojen ja kirjallisuuden esimerkkien mukaisesti. Lopuksi tulo-osaa mallinnetaan CFD-laskennalla. Diffuusori suunnitellaan käyttämällä soveltuvin osin kirjallisuudessa esitettyjätietoja, tulo-osan geometriaa ja CFD-laskentaa. Suunnittelutuloksia verrataan lopuksi kirjallisuudessa esitettyihin tuloksiin ja arvioidaan suunnittelun onnistumista sekä mahdollisia ongelmakohtia.

Computational Analysis and Optimization of Real Gas Flow In Small Centrifugal Compressors

Small centrifugal compressors are more and more widely used in many industrialsystems because of their higher efficiency and better off-design performance comparing to piston and scroll compressors as while as higher work coefficient perstage than in axial compressors. Higher efficiency is always the aim of the designer of compressors. In the present work, the influence of four partsof a small centrifugal compressor that compresses heavy molecular weight real gas has been investigated in order to achieve higher efficiency. Two parts concern the impeller: tip clearance and the circumferential position of the splitter blade. The other two parts concern the diffuser: the pinch shape and vane shape. Computational fluid dynamics is applied in this study. The Reynolds averaged Navier-Stokes flow solver Finflo is used. The quasi-steady approach is utilized. Chien's k-e turbulence model is used to model the turbulence. A new practical real gas model is presented in this study. The real gas model is easily generated, accuracy controllable and fairly fast. The numerical results and measurements show good agreement. The influence of tip clearance on the performance of a small compressor is obvious. The pressure ratio and efficiency are decreased as the size of tip clearance is increased, while the total enthalpy rise keeps almost constant. The decrement of the pressure ratio and efficiency is larger at higher mass flow rates and smaller at lower mass flow rates. The flow angles at the inlet and outlet of the impeller are increased as the size of tip clearance is increased. The results of the detailed flow field show that leakingflow is the main reason for the performance drop. The secondary flow region becomes larger as the size of tip clearance is increased and the area of the main flow is compressed. The flow uniformity is then decreased. A detailed study shows that the leaking flow rate is higher near the exit of the impeller than that near the inlet of the impeller. Based on this phenomenon, a new partiallyshrouded impeller is used. The impeller is shrouded near the exit of the impeller. The results show that the flow field near the exit of the impeller is greatly changed by the partially shrouded impeller, and better performance is achievedthan with the unshrouded impeller. The loading distribution on the impeller blade and the flow fields in the impeller is changed by moving the splitter of the impeller in circumferential direction. Moving the splitter slightly to the suction side of the long blade can improve the performance of the compressor. The total enthalpy rise is reduced if only the leading edge of the splitter ismoved to the suction side of the long blade. The performance of the compressor is decreased if the blade is bended from the radius direction at the leading edge of the splitter. The total pressure rise and the enthalpy rise of thecompressor are increased if pinch is used at the diffuser inlet. Among the fivedifferent pinch shape configurations, at design and lower mass flow rates the efficiency of a straight line pinch is the highest, while at higher mass flow rate, the efficiency of a concave pinch is the highest. The sharp corner of the pinch is the main reason for the decrease of efficiency and should be avoided. The variation of the flow angles entering the diffuser in spanwise direction is decreased if pinch is applied. A three-dimensional low solidity twisted vaned diffuser is designed to match the flow angles entering the diffuser. The numerical results show that the pressure recovery in the twisted diffuser is higher than in a conventional low solidity vaned diffuser, which also leads to higher efficiency of the twisted diffuser. Investigation of the detailed flow fields shows that the separation at lower mass flow rate in the twisted diffuser is later than in the conventional low solidity vaned diffuser, which leads to a possible wider flow range of the twisted diffuser.

Suomalaisten pienten ja keskisuurten osakeyhtiöiden konkurssin ennustaminen tilinpäätöstietojen avulla

Tämän tutkimuksen tavoitteena on selvittää, voidaanko yritysten tilinpäätöstiedoista löytää sellaisia muuttujia, jotka pystyvät ennustamaan yritysten konkursseja ja onko yrityksen kannattavuudella, vakavaraisuudella ja maksuvalmiudella kaikilla yhtä suuri merkitys konkurssin ennustamisessa. Lisäksi tavoitteena on verrata mitkä eri muuttujat selittävät konkurssia eri vuosina. Tutkimus toteutetaan luomalla viidelle vuodelle ennen konkurssia ennustusmallit käyttäen logistista regressiota. Tutkimus on rajattu koskemaan suomalaisia pieniä ja keskisuuria osakeyhtiöitä. Tutkimuksessa käytetty aineisto koostuu vuonna 2012 konkurssiin menneistä yrityksistä ja näille satunnaisotannalla valituista toimivista vertailuyrityksistä. Tutkimuksesta on rajattu pois nuoret, alle neljä vuotta toimineet yritykset, koska näiden konkurssiprosessit eroavat jo pidemmän aikaa toimineiden yritysten konkursseista.

TMEM16 proteins: the long awaited calcium-activated chloride channels?

Currents mediated by calcium-activated chloride channels (CaCCs), observed for the first time in Xenopus oocytes, have been recorded in many cells and tissues ranging from different types of neurons to epithelial and muscle cells. CaCCs play a role in the regulation of excitability in neurons including sensory receptors. In addition, they are crucial mediators of chloride movements in epithelial cells where their activity regulates electrolyte and fluid transport. The roles of CaCCs, particularly in epithelia, are briefly reviewed with emphasis on their function in secretory epithelia. The recent identification by three independent groups, using different strategies, of TMEM16A as the molecular counterpart of the CaCC is discussed. TMEM16A is part of a family that has 10 other members in mice. The discovery of the potential TMEM16 anion channel activity opens the way for the molecular investigation of the role of these anion channels in specific cells and in organ physiology and pathophysiology. The identification of TMEM16A protein as a CaCC chloride channel molecule represents a great triumph of scientific perseverance and ingenuity. The varied approaches used by the three independent research groups also augur well for the solidity of the discovery.

Taloudellinen kilpailija-analyysi osana strategista johdon laskentatoimea

Tämä kandidaatintutkielma käsittelee asiantuntijaorganisaatioiden tilinpäätöstietojen analysointia taloudellisen kilpailija-analyysin tekniikoita hyödyntäen. Tutkielman tavoitteena oli selvittää, miten kuudessa asiantuntijaorganisaatiossa on pyritty parantamaan tai säilyttämään saavutettu markkina-asema vuosina 2011–2014. Tutkimusmuotona käytettiin tilinpäätösanalyysia. Tutkielma on case-yrityksen toimeksiannosta toteutettu taloudellinen kilpailija-analyysi. Tutkimuksen teoriaosa käsittelee taloudellista kilpailija-analyysia osana strategista johdonlaskentatoimea. Teoreettinen viitekehys rakentuu taloudellisen kilpailija-analyysin tekniikoiden, sekä näitä koskevien empiiristen tutkimusten ympärille. Empiirinen osio jakautui kolmeen osaan, joista kaksi ensimmäistä käsittelivät case-yrityksen määrittelemän yritysjoukon seulomista muutaman taloudellisen tunnusluvun avulla. Varsinainen analyysin painopiste oli kuudelle yritykselle toteutetussa taloudellisessa kilpailija-analyysissa. Teorian pohjalta taloudellisen kilpailija-analyysin tutkimuskohteiksi valittiin kustannusrakenteet, kilpailuasema sekä tilinpäätöstiedot. Tutkielman tarkasteluajanjakso oli mielenkiintoinen, sillä vuosina 2011–2013 liikevaihtojen trendi oli jyrkästi laskeva, mutta vuonna 2014 yleisilme kääntyi nousevaksi. Tarkemman analyysin pohjalta johtopäätöksissä esiin nousivat kasvun ja kannattavuuden tunnusluvut. Opinnäytetyön tutkimustuloksissa havaittiin, että parhaiten tutkimuksen ajanjaksolla liikevaihtojen romahduksesta selvinneillä yrityksillä oli laaja-ansaintapohja sekä joustava kulurakenne. Kannattavuuden parhaiten säilyttäneet yritykset olivat tehneet runsaasti säästöjä henkilöstökuluissa, jotka muodostivat koko aineistossa suurimman osuuden kuluista. Vakavaraisuudeltaan vahvimmat yritykset eivät tehneet rajuja leikkauksia kulurakenteistaan, vaan sietivät muita pidempään heikkoa kannattavuutta.

Pienten osuuskuntien taloudellinen suoriutuminen

Tämän kandidaatintutkielman tarkoituksena on tutkia suomalaisia pienosuuskuntia niiden taloudellisen suoriutumisen näkökulmasta. Taloudellista suoriutumista tutkitaan tunnuslukujen avulla osuuskuntien tilinpäätöksissä olevien lukujen perusteella. Lisäksi tutkitaan, onko taloudellisessa suoriutumisessa eroavaisuuksia alueen, toimialan tai osuuskunnan koon välillä. Tutkimuksen aineisto on peräisin suomalaisten osuuskuntien tilinpäätöksistä, jotka ovat saatavilla Patentti- ja rekisterihallituksen Virre-tietokannasta. Aineistoa analysoidaan SAS Enterprise Guide -ohjelman avulla käyttäen apuna jakauma-analyysiä, yhteenvetotilastoja, Kruskal-Wallisin testiä sekä Spearmanin korrelaatioanalyysiä. Jakauma-analyyseillä ja yhteenvetotilastoilla muodostetaan aineistosta kokonaiskuva ja analysoidaan suomalaisten pienosuuskuntien tunnuslukuja. Kruskal-Wallis testillä analysoidaan taloudellisen suoriutumisen eroa alueellisesti ja toimialakohtaisesti ja Spearmanin korrelaatiokertoimella mitataan korrelaatiota liikevaihdon ja tunnuslukujen välillä. Tulosten perusteella osuuskuntien taloudellinen suoriutuminen ei ole sidoksissa toimialaan eikä alueeseen. Koon ja quick ration välillä löytyi negatiivinen korrelaatio. Suomalaisten pienosuuskuntien maksuvalmius on hyvällä tasolla. Myös vakavaraisuus on kohtalainen. Kannattavuuden tunnusluvut jäivät osuuskunnilla hyvin alhaisiksi ja osin jopa negatiivisiksi. Koska osuuskuntien toiminnan tarkoitus ei ole maksimoida voittoa, voidaan kannattavuuden tunnuslukuja pitää hyvällä tasolla, kunhan ne ovat positiivisia.