Storage effect on the acceptability of snacks made of pure amaranth and blends of amaranth and corn or chickpea

Snacks made by extrusion cooking of pure amaranth flour or mixtures of 80 per cent amaranth flour and 20 per centcorn grits or chickpea flour were developed to replace the traditional commercial ones with improved nutritional and functional quality. Pure amaranth snacks and the blended ones were flavored with salty and sweet flavors and evaluated for acceptability using a 9-point hedonic scale. The good acceptance observed for either salty or sweet flavored snacks indicated that they have characteristics to compete with similar commercial products. Acceptability of salty snacks increased with storage time at room temperature in BOPP (polypropylene bi-guided) packs whereas slightly decreased for the sweet ones. This type of storage proved to be very efficient for the conservation of the salty product and also suitable for the sweet ones

Effect of fructans-based fat replacer on chemical composition, starch digestibility and sensory acceptability of corn snacks

To develop a convenience healthy food snack the partially hydrogenated vegetable fat, used as the flavour fixative agent, was replaced by a non-fat-flavouring solution enriched with inulin and oligofructose. The effects of this replacement on chemical composition, in vitro rate of starch digestion and sensory acceptability were assessed. The new snack presented low-fat levels (0.1 per cent) and around a sevenfold increase in dietary fibre (15.3 per cent of dietary fibre, being 13.3 per cent of fructans) when compared with the traditional ones. The enrichment with fructans reduced the predicted Glycaemic Index by 25 per cent, thus indicating that this dietary fibre contributes effectively towards delaying the in vitro glycaemic response. Fructans-enriched snack presented overall acceptability score (6.6 ± 1.7) similar to the traditional one, flavoured with fatty fixative agent (7.4 ± 1.4). The healthy low-fat fibre-enriched snack produced presented the high sensory acceptability typical for this food product type

Storage stability of snacks with reduced saturated and trans fatty acids contents

A gordura vegetal parcialmente hidrogenada tem sido utilizada na aromatização de snacks. Entretanto, o risco à saúde ocasionado pelo elevado consumo de ácidos graxos saturados e trans (AGT) vem estimulando o desenvolvimento de abordagens alternativas a essa gordura. Substituímos a gordura vegetal parcialmente hidrogenada (F) por óleo de canola (O) na aromatização de snacks. Snacks com diferentes níveis de O foram produzidos, embalados e armazenados em temperatura ambiente durante vinte semanas. Monitoramos o perfil de ácidos graxos, o teor de substâncias reativas ao TBA (TBARS), a força de cisalhamento e a aceitabilidade sensorial. A substituição total reduziu o teor de ácidos graxos saturados em 72,5 por cento, em comparação aos snacks comerciais. Os snacks eram inicialmente isentos de AGT, porém, após 8 semanas, esses compostos surgiram, havendo aumento gradual durante o período de armazenamento. Entretanto, estes níveis mantiveram-se inferiores aos observados em snacks comercializados. Também foram observados baixos teores de TBARS e estabilidade da força de cisalhamento. Snacks aromatizados com F ou O foram igualmente bem aceitos durante as vinte semanas de armazenamento. É possível desenvolver snacks com teores reduzidos de ácidos graxos saturados e trans, estáveis durante o armazenamento, mantendo a elevada aceitabilidade sensorial típica deste tipo de produto

ERICA: use of screens and consumption of meals and snacks by Brazilian adolescents

ABSTRACT OBJECTIVE To describe the length of exposure to screens and the prevalence of consumption of meals and snacks by Brazilian adolescents in front of screens. METHODS We evaluated 74,589 12 to 17-year old adolescents from 1,247 schools in 124 Brazilian municipalities. A self-administered questionnaire was used. Its segment regarding nutrition contained questions about using TV, computers, and video game systems, having meals while watching TV, and consuming snacks in front of screens. Consumption of meals and snacks in front of screens was analyzed according to the following variables: geographical region, gender, age range, type of school (public or private), and school shift. The prevalences and their respective 95% confidence intervals were estimated under a complex sampling design. RESULTS A great deal of the adolescents (73.5%, 95%CI 72.3-74.7) reported spending two or more hours a day in front of screens. That habit was more frequent among male adolescents, private school students, morning shift students, and students from Brazil’s South region. More than half of the adolescents (56.6%, 95%CI 55.4-57.8) reported almost always or always having meals in front of TV, and 39.6% (95%CI 38.8-40.5) of them said they consumed snacks in front of screens exactly as often. Both situations were the most prevalent ones among the girls, who attended public schools and were from Brazil’s Midwest region. CONCLUSIONS Length of exposure to screens and consumption of meals and snacks almost always or always in front of screens are high among Brazilian adolescents. It is necessary to develop strategies aiming to reduce the length of screen use, considering the media reality that children and adolescents have been experiencing from earlier and earlier ages. That context must therefore be analyzed in an indissociable way.

MISTURAS DE FARINHA DE AVEIA E AMIDO DE MILHO COM ALTO TEOR DE AMILOPECTINA PARA PRODUÇÃO DE "SNACKS"

O potencial de uso do amido modificado com alto teor de amilopectina combinado à farinha de aveia para produção de "snacks" extrusados foi investigado. O processamento foi executado em extrusor mono-rosca, de acordo com um delienamento fatorial (2(5)) incompleto, com 3 repetições no ponto central. As variáveis independentes controladas foram: umidade da matéria-prima, temperatura de extrusão, rotação do parafuso, diâmetro da matriz e teor de amido modificado. Como respostas, avaliou-se o volume específico, a dureza e a fraturabilidade. A partir da modelagem exploratória foram definidas as variáveis significativas e novos deslocamentos na área experimental, até se atingir o ponto ótimo para produção de "snacks". A melhor combinação de variáveis encontrada, para obter um produto com boas propriedades de expansão e de textura, foi: 17% de umidade de matéria-prima, 183°C de temperatura de extrusão, 100rpm de rotação do parafuso, 4mm de diâmetro da matriz e 30% de amido modificado. O produto obtido nessas condições apresentou 7,2mL/g de volume específico, 5,41N de dureza e 2,02N de fraturabilidade, assemelhando-se, por essas características, aos produtos comerciais de milho.

Parâmetros de estrusão para produção de "snacks" de farinha de cará (Dioscorea alata)

Farinha de cará (Dioscorea alata) foi processada em extrusor mono-rosca, para a manufatura de "snacks". Foi empregada a Metodologia de Superfície de Resposta para avaliar os efeitos da umidade (16, 20 e 24%), temperatura (120, 150 e 180ºC) e diâmetro da matriz (3, 4 e 5mm) nas características dos extrusados. A temperatura foi a variável mais importante, influenciando todas as propriedades estudadas. O volume específico e o comprimento específico aumentaram quando a temperatura aumentou e a umidade e o diâmetro da matriz diminuíram, enquanto, ao mesmo tempo, fraturabilidade e dureza diminuíram. A expansão diminuiu, quando a temperatura aumentou de 120 para 180ºC. Foram selecionadas duas condições experimentais que possibilitavam obter "snacks" com propriedades desejáveis (alto volume específico e baixa dureza e fraturabilidade) e os produtos foram avaliados por equipes sensoriais não treinadas. Estas apontaram que o melhor produto foi aquele extrusado com um teor de umidade de 17%, a 170ºC, com uma matriz de 4mm de abertura. Este produto obteve um índice de aceitabilidade de 80%, quando avaliado por 140 consumidores.

Storage stability of snacks with reduced saturated and trans fatty acids contents

Partially hydrogenated vegetable oil has been used in snack flavoring for its ability to entrap hydrophobic aroma compounds. However, increasing concerns about the health risks of saturated and trans fatty acids (TFA) consumption led to the development of alternative agents for this use. We studied the use of rapeseed oil (O) as a replacement for partially hydrogenated vegetable oil (F) in snack flavoring. Products with several different rapeseed oil contents were designed, packed, and then stored for twenty weeks at room temperature. Fatty acids compositions, TBA reactive substances (TBARS), shear strength and sensory acceptability were assessed throughout storage time. Total replacement reduced saturated fat by 72.5% in relation to market available snacks. TFA were initially absent in these products, but their production occurred spontaneously on the 8th week with gradual increase during storage up to levels still lower than those observed in commercially available snacks. Low TBARS levels and stability of shear strength during the twenty-week of storage were also observed. Snacks flavored with F or O were equally well accepted during the storage period. It is feasible to develop a storage stable snack with reduced saturated and trans fatty acid contents while maintaining the high sensory acceptability typical of this food product.

Functional extruded snacks with lycopene and soy protein

In this work, the effects of thermoplastic extrusion process parameters (raw material moisture content and temperature) and the addition of functional ingredients (lycopene and soy protein) on quality characteristics of a base-formulation for extruded corn snacks were studied, with the objective of developing an easy-to-eat functional product. A single-screw Labor PQ 30 model Inbramaq extruder was used for extrusion and a central composite rotational design (CCRD) was followed. The independent variables were: i) percentage of soy protein isolate (0-30%); ii) percentage of lycopene preparation (0-0.1%); iii) raw material moisture content (20-30%); and iv) 5th zone temperature (100-150 °C). The expansion index reached maximum values with the lowest raw material moisture content (20%) and intermediate temperatures (approximately 125 °C). Instrumental hardness was higher with high moisture and low temperature; however, increasing the percentage of soy protein was beneficial for the texture of the product, reducing hardness. The red color intensity increased with the increase in lycopene content and moisture, and with the reduction of temperature. Sensory acceptance tests were carried out for two products, with maximum percentages of the functional ingredients, 20% moisture and temperatures of 125 and 137 °C, with greater acceptance for the product extruded at 125 °C.

Effects of defatted amaranth (Amaranthus caudatus L.) snacks on lipid metabolism of patients with moderate hypercholesterolemia

We evaluated the effects of defatted amaranth (Amaranthus caudatus L.) snacks on plasma lipids in moderate hypercholesterolemic patients. Twenty-two subjects [30-65 years old), 11 males, with total cholesterol (TC) > 240 mg.dL-1, low-density cholesterol (LDL-c) 160-190 mg.dL-1 and plasma triglycerides (TG) < 400 mg.dL-1] were randomized in a double blind clinical trial to receive an amaranth snack (50 g/day) or equivalent corn snack (placebo) for 2 months. There were no differences between amaranth and placebo on TC and LDL-c, and TG respectively: -8.4 and -5.7% (p = 0.17); -12.3 and -9.7% (p = 0.41) and -0.6 and -7.3% (p = 0.47). However, amaranth snacks significantly reduced high-density cholesterol (HDL-c): -15.2 vs. -4% (p = 0.03). In conclusion, the intake of 50 g of extruded amaranth daily during 60 days did not significantly reduce LDL-c in moderate hypercholesterolemic subjects; furthermore there was a significant reduction in HDL-c. Studies with greater number of subjects and greater quantity of this food are necessary to test the effects of amaranth on lipid metabolism in humans.

Changes in physical properties of extruded sour cassava starch and quinoa flour blend snacks

Given the broad acceptance of sour cassava starch biscuits in Brazil and the nutritional quality of quinoa flour, this study aimed to evaluate the effect of extrusion temperature, screw speed, moisture, and amount of quinoa flour on the physical properties of puffed snacks. Extrusion process was carried out using a single-screw extruder in a factorial central composite design with four factors. Effects of moisture and amount of quinoa flour on the expansion index and specific volume of snacks were observed. There was a pronounced increase in water solubility index of blends with the extrusion process with significant effects of all process parameters on the WSI. Higher water absorption index (WAI) was observed under high temperature, low moisture, and lower quinoa flour amount. Temperature and amount of quinoa flour influenced the color of the snacks. A positive quadratic effect of quinoa flour on hardness of products was observed. Blends of sour cassava starch and quinoa flour have good potential for use as raw material in production of extruded snacks with good physical properties.

Effects of processing on physical properties of extruded snacks with blends of sour cassava starch and flaxseed flour

The opportunity to supplement common cassava biscuits with a product of higher nutritional value meets consumer expectations. In this work it was studied the effects of process parameters and flaxseed addition on physical properties of expanded snacks. Extrusion process was carried out using a single screw extruder in a factorial central composite rotatable design with four factors: flaxseed flour percentage (0-20%), moisture (12-20%), extrusion temperature (90-130 °C) and screw speed (190-270). The effect of extrusion variables was investigated in terms of expansion index, specific volume, water absorption index, water solubility index, color parameters (L*, a* ,b*) and hardness. The data analysis showed that variable parameters of the extrusion process and flaxseed flour affected physical properties of puffed snacks. Among the experimental conditions used in the present study, expanded snack products with good physical properties can be obtained under the conditions of 10% flaxseed flour, 230 rpm screw speed, temperature of 90 °C and moisture of 12%.

Optimization of extrusion variables for the production of snacks from by-products of rice and soybean

This study aimed to define the process conditions to obtain snacks from the by-products of rice and soybean with physical characteristics suitable for marketing. Therefore, the effects of moisture and extrusion temperature on the expansion and color of the products obtained experimentally obtained were evaluated, and the proximate composition of the by-products and that of the snack with greater desirability were determined. Response surface methodology and rotational central composite design were used, and desirability test based on the regression models adjusted was applied. The most desirable snack, with the highest expansion index (3.39), specific volume (13.5 mL.g-1), and the chromaticity coordinate a* (2.79), was obtained under 12 g.100 g-1 moisture and 85ºC of temperature in the third zone of the extruder. The snack produced under these conditions attained content of protein and lipid content 41 and 64% higher than that of the traditional corn snack. It can be concluded that producing extruded snack made form a mixture of broken grains, rice bran, and soybean okara (81:9:10) is technologically feasible, enabling the development of a new product with good nutritional value that can improve the diet of children, the main consumers of this type of food.

Alterations of palm oil (Elaeis guineensis) in the continuous industrial par frying of breaded chicken snacks

The physical and chemical alterations in palm oil during continuous industrial par frying of breaded chicken snacks were evaluated using a pseudo first-order kinetic model. The acidity index, refractive index, concentration of polar compounds, viscosity, color, and absorbance (232 and 268 nm) of 238 samples of the frying oil collected during 26 days of production were analyzed. For all of the analyses, the results of the oil were below the limits recommended for oil disposal, indicating that the processing conditions were safe and that under these experimental conditions the oil remained suitable for frying. The linear regressions were significant for refractive index, content of polar compounds, and lightness (L*). The content of polar compounds was determined using a cooking oil tester, and it had the best fit to the proposed model and can be used as an effective index for monitoring palm oil during the continuous par frying of breaded chicken snacks. The high turnover rate of the oil was important for maintaining the oil in good running conditions.

Extruded snacks with the addition of different fish meals

Abstract Tilapia, salmon, tuna and sardine meals were prepared to develop and analyze extruded snacks with residue meal from fish processing. Residue meals were included in five types of corn snacks: control (0% fish meal) and four with 9% tilapia, salmon, tuna and sardine meals. Although moisture, lipids and carbohydrates rates did not differ among the snacks, protein rates increased with the increment of fish meal, reaching 11.85% in the tuna snack. Tuna and sardine snacks had the highest iron levels. The most abundant fatty acids were linoleic, oleic, palmitic, linolenic and stearic acids, with sardine, salmon and tuna snacks presenting the highest values of n-3 series fatty acids. Greater luminosity rate was reported for salmon snack, followed by tilapia, tuna and sardine snacks. The highest sensory acceptance index was verified in tilapia (78.07%) and salmon (72.40%). A 9% addition of residue meals of tilapia, salmon and tuna improved the nutritional value of the snacks.

Effect of Amaranth addition on the nutritional composition and consumer acceptability of extruded provitamin A-biofortified maize snacks

The objective of this study was to determine the effect of adding Amaranth leaf powder on the nutrient content and consumer acceptability of extruded provitamin A-biofortified (PVA) maize snacks. Flours of four varieties of PVA maize were composited with Amaranth leaf powder at 0, 1 and 3% (w/w) substitution of, respectively, and extruded into snacks. The ash content of the snacks increased from 0.53 g/100 g-0.58 g/100 g to 0.650 g/100g-89 g/100 g and protein content increased from 9.12 g/100 g-10.94 g/100 g when Amaranth was increased from 0% to 3%. Similarly, lysine content increased from 0.10 g/100 g to 0.17 g/100 g, whilst methionine increased from 0.14 g/100 g to 0.19 g/100 g. The provitamin A content of the snacks ranged from 1.29 µg/g to 1.40 µg/g at 0% Amaranth and 1.54 µg/g to 1.78 µg/g at 3% Amaranth. The acceptability of the snacks decreased with increasing Amaranth concentration, only a very small proportion (2-8%) of the panel liked the snacks extremely. PVA maize with added Amaranth leaf powder has a potential for use in nutritious and healthy extruded snacks, but the consumer acceptability of the snacks should be improved.