SMART PANEL: medição, controlo e monitorização num clique

Na sociedade atual, a preocupação com o ambiente, por um lado, e com o conforto e a segurança, por outro, faz com que a sustentabilidade energética se assuma como uma forma de intervenção adequada às exigências de qualidade de vida e à eficiência no âmbito da economia. Nesta conformidade, é incontornável a mais-valia do Smart Panel, um quadro elétrico inteligente criado pela Schneider-Electric com vista à consecução daqueles desideratos. Iremos abordar, neste artigo, a gama de produtos que perfazem esta tecnologia, fazendo uma breve descrição de cada um deles, expondo de seguida um exemplo de aplicação desta tecnologia. Numa fase posterior apresentaremos as vantagens do Smart Panel face à tecnologia tradicional (até hoje a mais comum) no que respeita ao controlo de um quadro elétrico, Sistema de Gestão Técnica Centralizada.

Quadros Elétricos Inteligentes-Smart Panels

Na sociedade atual, a preocupação com o ambiente, por um lado, e com o conforto e a segurança, por outro, faz com que a sustentabilidade energética se assuma como uma forma de intervenção adequada às exigências de qualidade de vida e à eficiência no âmbito da economia. Nesta conformidade, é incontornável a mais-valia do Smart Panel, um quadro elétrico inteligente criado com vista à consecução daqueles desideratos, o que motivou o tema do presente trabalho. Assim, pretende-se demonstrar as potencialidades do Smart Panel, um novo conceito de quadro elétrico que visa a otimização da sua funcionalidade na gestão dinâmica e pragmática das instalações elétricas, nomeadamente no que respeita ao controlo, monitorização e atuação sobre os dispositivos, quer in loco quer, sobretudo, à distância. Para a consecução deste objetivo, concorrem outros que o potenciam, designadamente a compreensão do funcionamento do quadro elétrico (QE) tradicional, a comparação deste com o Smart Panel e a demonstração das vantagens da utilização desta nova tecnologia. A grande finalidade do trabalho desenvolvido é, por um lado, colocar a formação académica ao serviço de um bom desempenho profissional futuro, por outro ir ao encontro da tendência tecnológica inerente às necessidades que o homem, hoje, tem de controlar. Deste modo, num primeiro momento, é feita uma abordagem geral ao quadro eléctrico tradicional a fim de ser compreendido o seu funcionamento, aplicações e potencialidades. Para tanto, a explanação inclui a apresentação de conceitos teóricos subjacentes à conceção, produção e montagem do QE. São explicitados os diversos componentes que o integram e funções que desempenham, bem como as interações que estabelecem entre si e os normativos a que devem obedecer, para conformidade. Houve a preocupação de incluir imagens coadjuvantes das explicações, descrições e procedimentos técnicos. No terceiro capítulo é abordada a tecnologia Smart Panel, introduzindo o conceito e objetivos que lhe subjazem. Explicita-se o modo de funcionamento deste sistema que agrupa proteção, supervisão, controlo, armazenamento e manutenção preventiva, e demonstra-se de que forma a capacidade de leitura de dados, de comunicação e de comando do quadro elétrico à distância se afigura uma revolução tecnológica facilitadora do cumprimento das necessidades de segurança, conforto e economia da vida moderna. Os capítulos quarto, quinto e sexto versam uma componente prática do trabalho. No capítulo quarto é explanado um suporte formativo e posterior demonstração do kit de ensaio, que servirá de apoio à apresentação da tecnologia Smart Panel aos clientes. Além deste suporte de formação, no quinto capítulo é elaborada uma lista de procedimentos de verificação a serem executados aos componentes de comunicação que integram o Smart Panel, para fornecimento ao quadrista. Por fim, no sexto capítulo incluem-se dois casos de estudo: o estudo A centra-se na aplicação da tecnologia Smart Panel ao projeto de um QE tradicional, que implica fazer o levantamento de toda a aparelhagem existente e, de seguida, proceder à transposição para a tecnologia Smart Panel por forma a cumprir os requisitos estabelecidos pelo cliente. O estudo de caso B consiste na elaboração de um projeto de um quadro eléctrico com a tecnologia Smart Panel em função de determinados requisitos e necessidades do cliente, por forma a garantir as funções desejadas.

Instalazio elektriko adimentsu baten proiektua, autokontsumorako sorkuntza elektrikoarekin, industriako nabe batentzat

Proiektuaren helburua Irulezo enpresaren instalazio elektrikoa eraberritzea da. Egungo behe tentsioko koadro nagusia “smart panel” batetan bilakatuko da, bere kokapena beheko pisuko biltegitik jangelara pasaraziz. Horrela, jangelan behe tentsioko koadro berri bat sortuko da, gaur egun dagoen bigarren mailako koadroa integratuz eta ordezkatuz.

Projeto de sistema de gestão técnica centralizada integrando Smart Panels: edifício comercial como caso de estudo

Os Sistemas de Gestão Técnica Centralizada (SGTC) assumem-se como essenciais nos grandes edifícios, já que permitem monitorizar, controlar, comandar e gerir, de forma facilitada, integrada e otimizada, as várias instalações existentes no edifício. O estado da arte de um SGTC baseia-se numa arquitetura distribuída, com recurso a Quadros de Gestão Técnica (QGT) que incluem Automation Servers - equipamentos nativos nos protocolos de comunicação mais comummente utilizados neste âmbito, incorporadores de funcionalidades e programações pré-definidas, e que ficarão responsáveis por integrar na sua área de influência, um conjunto de pontos de SGTC, definidos em projeto. Numa nova filosofia de instalação, integração e comunicação facilitada entre dispositivos que nos quadros elétricos geram dados relevantes para o utilizador e desencadeiam ações úteis na gestão de uma instalação, surge o novo conceito no mercado de Smart Panels, da Schneider Electric. Este sistema baseia-se numa ampla e diversa gama de possibilidades de medição e monitorização energética e da própria aparelhagem, com um sistema de comunicação com o sistema de gestão e controlo da instalação integrado no próprio quadro, dispensando assim a necessidade de um sistema externo (QGT), de recolha, comunicação e processamento de informação. Após o estudo descritivo teórico dos vários tópicos, questões e considerações relacionadas com os SGTC, os Smart Panels e a sua integração, o projeto e estudo comparativo do SGTC sem e com a integração de Smart Panels num grande centro comercial, permitiu concluir que a integração de Smart Panels num SGTC pode conferir vantagens no que diz respeito à implificação do projeto, da instalação, do comissionamento, programação, e da própria exploração da instalação elétrica, traduzindo-se numa redução dos custos normalmente elevados inerentes à mão de obra associada a todos estes processos.

Creation of a web application for smart park system and parking prediction study for system integration

In the last few years, we have observed an exponential increasing of the information systems, and parking information is one more example of them. The needs of obtaining reliable and updated information of parking slots availability are very important in the goal of traffic reduction. Also parking slot prediction is a new topic that has already started to be applied. San Francisco in America and Santander in Spain are examples of such projects carried out to obtain this kind of information. The aim of this thesis is the study and evaluation of methodologies for parking slot prediction and the integration in a web application, where all kind of users will be able to know the current parking status and also future status according to parking model predictions. The source of the data is ancillary in this work but it needs to be understood anyway to understand the parking behaviour. Actually, there are many modelling techniques used for this purpose such as time series analysis, decision trees, neural networks and clustering. In this work, the author explains the best techniques at this work, analyzes the result and points out the advantages and disadvantages of each one. The model will learn the periodic and seasonal patterns of the parking status behaviour, and with this knowledge it can predict future status values given a date. The data used comes from the Smart Park Ontinyent and it is about parking occupancy status together with timestamps and it is stored in a database. After data acquisition, data analysis and pre-processing was needed for model implementations. The first test done was with the boosting ensemble classifier, employed over a set of decision trees, created with C5.0 algorithm from a set of training samples, to assign a prediction value to each object. In addition to the predictions, this work has got measurements error that indicates the reliability of the outcome predictions being correct. The second test was done using the function fitting seasonal exponential smoothing tbats model. Finally as the last test, it has been tried a model that is actually a combination of the previous two models, just to see the result of this combination. The results were quite good for all of them, having error averages of 6.2, 6.6 and 5.4 in vacancies predictions for the three models respectively. This means from a parking of 47 places a 10% average error in parking slot predictions. This result could be even better with longer data available. In order to make this kind of information visible and reachable from everyone having a device with internet connection, a web application was made for this purpose. Beside the data displaying, this application also offers different functions to improve the task of searching for parking. The new functions, apart from parking prediction, were: - Park distances from user location. It provides all the distances to user current location to the different parks in the city. - Geocoding. The service for matching a literal description or an address to a concrete location. - Geolocation. The service for positioning the user. - Parking list panel. This is not a service neither a function, is just a better visualization and better handling of the information.

Observer-based state-feedback versus H-infinity output feedback control solved by LMI approach for applications in smart structures

This paper aims with the use of linear matrix inequalities approach (LMIs) for application in active vibration control problems in smart strutures. A robust controller for active damping in a panel was designed with piezoelectrical actuators in optimal locations for illustration of the main proposal. It was considered, in the simulations of the closed-loop, a model identified by eigensystem realization algorithm (ERA) and reduced by modal decomposition. We tested two differents techniques to solve the problem. The first one uses LMI approach by state-feedback based in an observer design, considering several simultaneous constraints as: a decay rate, limited input on the actuators, bounded output peak (output energy) and robustness to parametic uncertainties. The results demonstrated the vibration attenuation in the structure by controlling only the first modes and the increased damping in the bandwidth of interest. However, it is possible to occur spillover effects, because the design has not been done considering the dynamic uncertainties related with high frequencies modes. In this sense, the second technique uses the classical H. output feedback control, also solved by LMI approach, considering robustness to residual dynamic to overcome the problem found in the first test. The results are compared and discussed. The responses shown the robust performance of the system and the good reduction of the vibration level, without increase mass.

Adaptive filter feature identification for structural health monitoring in an aeronautical panel

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Adaptive filter feature identification for structural health monitoring in aeronautical panel

This paper presents an approach for structural health monitoring (SHM) by using adaptive filters. The experimental signals from different structural conditions provided by piezoelectric actuators/sensors bonded in the test structure are modeled by a discrete-time recursive least square (RLS) filter. The biggest advantage to use a RLS filter is the clear possibility to perform an online SHM procedure since that the identification is also valid for non-stationary linear systems. An online damage-sensitive index feature is computed based on autoregressive (AR) portion of coefficients normalized by the square root of the sum of the square of them. The proposed method is then utilized in a laboratory test involving an aeronautical panel coupled with piezoelectric sensors/actuators (PZTs) in different positions. A hypothesis test employing the t-test is used to obtain the damage decision. The proposed algorithm was able to identify and localize the damages simulated in the structure. The results have shown the applicability and drawbacks the method and the paper concludes with suggestions to improve it. ©2010 Society for Experimental Mechanics Inc.

Extended-range smart conventional weapon systems : a paper /

Cover title.

Optimization of Energy Distribution in Solar Panel Array Configurations by Graph Theory and Minkowski’s Paths

Nowadays, the development of the photovoltaic (PV) technology is consolidated as a source of renewable energy. The research in the topic of maximum improvement on the energy efficiency of the PV plants is today a major challenge. The main requirement for this purpose is to know the performance of each of the PV modules that integrate the PV field in real time. In this respect, a PLC communications based Smart Monitoring and Communications Module, which is able to monitor at PV level their operating parameters, has been developed at the University of Malaga. With this device you can check if any of the panels is suffering any type of overriding performance, due to a malfunction or partial shadowing of its surface. Since these fluctuations in electricity production from a single panel affect the overall sum of all panels that conform a string, it is necessary to isolate the problem and modify the routes of energy through alternative paths in case of PV panels array configuration.

Leaf-, Panel- And Latex-expressed Sequenced Tags From The Rubber Tree (hevea Brasiliensis) Under Cold-stressed And Suboptimal Growing Conditions: The Development Of Gene-targeted Functional Markers For Stress Response.

Hevea brasiliensis is a native species of the Amazon Basin of South America and the primary source of natural rubber worldwide. Due to the occurrence of South American Leaf Blight disease in this area, rubber plantations have been extended to suboptimal regions. Rubber tree breeding is time-consuming and expensive, but molecular markers can serve as a tool for early evaluation, thus reducing time and costs. In this work, we constructed six different cDNA libraries with the aim of developing gene-targeted molecular markers for the rubber tree. A total of 8,263 reads were assembled, generating 5,025 unigenes that were analyzed; 912 expressed sequence tags (ESTs) represented new transcripts, and two sequences were highly up-regulated by cold stress. These unigenes were scanned for microsatellite (SSR) regions and single nucleotide polymorphisms (SNPs). In total, 169 novel EST-SSR markers were developed; 138 loci were polymorphic in the rubber tree, and 98 % presented transferability to six other Hevea species. Locus duplication was observed in H. brasiliensis and other species. Additionally, 43 SNP markers in 13 sequences that showed similarity to proteins involved in stress response, latex biosynthesis and developmental processes were characterized. cDNA libraries are a rich source of SSR and SNP markers and enable the identification of new transcripts. The new markers developed here will be a valuable resource for linkage mapping, QTL identification and other studies in the rubber tree and can also be used to evaluate the genetic variability of other Hevea species, which are valuable assets in rubber tree breeding.

An assessment of population structure in eight breeds of cattle using a whole genome SNP panel

Background: Analyses of population structure and breed diversity have provided insight into the origin and evolution of cattle. Previously, these studies have used a low density of microsatellite markers, however, with the large number of single nucleotide polymorphism markers that are now available, it is possible to perform genome wide population genetic analyses in cattle. In this study, we used a high-density panel of SNP markers to examine population structure and diversity among eight cattle breeds sampled from Bos indicus and Bos taurus. Results: Two thousand six hundred and forty one single nucleotide polymorphisms ( SNPs) spanning all of the bovine autosomal genome were genotyped in Angus, Brahman, Charolais, Dutch Black and White Dairy, Holstein, Japanese Black, Limousin and Nelore cattle. Population structure was examined using the linkage model in the program STRUCTURE and Fst estimates were used to construct a neighbor-joining tree to represent the phylogenetic relationship among these breeds. Conclusion: The whole-genome SNP panel identified several levels of population substructure in the set of examined cattle breeds. The greatest level of genetic differentiation was detected between the Bos taurus and Bos indicus breeds. When the Bos indicus breeds were excluded from the analysis, genetic differences among beef versus dairy and European versus Asian breeds were detected among the Bos taurus breeds. Exploration of the number of SNP loci required to differentiate between breeds showed that for 100 SNP loci, individuals could only be correctly clustered into breeds 50% of the time, thus a large number of SNP markers are required to replace the 30 microsatellite markers that are currently commonly used in genetic diversity studies.

Type specific and genotype cross reactive B epitopes of the L1 protein of HPV16 defined by a panel of monoclonal antibodies

Mouse monoclonal antibodies (mAbs) were raised against the major capsid protein, L1, of human papillomavirus type 16 (HPV16), produced in Escherichia coil with the expression plasmid pTrcL1. Epitope specificity could be assigned to 11 of these 12 antibodies using a series of linear peptides and fusion proteins from HPV16. One mAb (MC53) recognized a novel linear epitope that appears to be unique to the HPV16 genotype. A further 11 mAbs were characterized as recognizing novel and previously defined linear and conformational epitopes shared among more than one HPV genotype. The apparently genotype specific mAb could be useful for the development of diagnostic tests for vegetative virus infection in clinical specimens. (C) 1998 Academic Press.

Smart Alerts: Development of Software to Optimize Data Monitoring

Dherte PM, Negrao MPG, Mori Neto S, Holzhacker R, Shimada V, Taberner P, Carmona MJC - Smart Alerts: Development of a Software to Optimize Data Monitoring. Background and objectives: Monitoring is useful for vital follow-ups and prevention, diagnosis, and treatment of several events in anesthesia. Although alarms can be useful in monitoring they can cause dangerous user`s desensitization. The objective of this study was to describe the development of specific software to integrate intraoperative monitoring parameters generating ""smart alerts"" that can help decision making, besides indicating possible diagnosis and treatment. Methods: A system that allowed flexibility in the definition of alerts, combining individual alarms of the parameters monitored to generate a more elaborated alert system was designed. After investigating a set of smart alerts, considered relevant in the surgical environment, a prototype was designed and evaluated, and additional suggestions were implemented in the final product. To verify the occurrence of smart alerts, the system underwent testing with data previously obtained during intraoperative monitoring of 64 patients. The system allows continuous analysis of monitored parameters, verifying the occurrence of smart alerts defined in the user interface. Results: With this system a potential 92% reduction in alarms was observed. We observed that in most situations that did not generate alerts individual alarms did not represent risk to the patient. Conclusions: Implementation of software can allow integration of the data monitored and generate information, such as possible diagnosis or interventions. An expressive potential reduction in the amount of alarms during surgery was observed. Information displayed by the system can be oftentimes more useful than analysis of isolated parameters.