Denisiuk-type reflection holography display with sillenite crystals for imaging and interferometry of small objects

A novel setup for imaging and interferometry through reflection holography with Bi12TiPO20(BTO) sillenite photorefractive crystals is proposed. A variation of the lensless Denisiuk arrangement was developed resulting in a compact, robust and simple interferometer. A red He-Ne laser was used as light source and the holographic recording occurred by diffusion with the grating vector parallel to the crystal [0 0 1]-axis. In order to enhance the holographic image quality and reduce noise a polarizing beam splitter (PBS) was positioned at the BTO input and the crystal was tilted around the [0 0 1]-axis. This enabled the orthogonally polarized transmission and diffracted beams to be separated by the PBS, providing the holographic image only. The possibility of performing deformation and strain analysis as well as vibration measurement of small objects was demonstrated. (C) 2007 Elsevier B.V. All rights reserved.

Denisiuk-type reflection holography display with sillenite crystals for imaging and interferometry of small objects

A novel setup for imaging and interferometry through reflection holography with Bi12TiPO20(BTO) sillenite photorefractive crystals is proposed. A variation of the lensless Denisiuk arrangement was developed resulting in a compact, robust and simple interferometer. A red He-Ne laser was used as light source and the holographic recording occurred by diffusion with the grating vector parallel to the crystal [0 0 1]-axis. In order to enhance the holographic image quality and reduce noise a polarizing beam splitter (PBS) was positioned at the BTO input and the crystal was tilted around the [0 0 1]-axis. This enabled the orthogonally polarized transmission and diffracted beams to be separated by the PBS, providing the holographic image only. The possibility of performing deformation and strain analysis as well as vibration measurement of small objects was demonstrated. (C) 2007 Elsevier B.V. All rights reserved.

Matrix Method for Acoustic Levitation Simulation

A matrix method is presented for simulating acoustic levitators. A typical acoustic levitator consists of an ultrasonic transducer and a reflector. The matrix method is used to determine the potential for acoustic radiation force that acts on a small sphere in the standing wave field produced by the levitator. The method is based on the Rayleigh integral and it takes into account the multiple reflections that occur between the transducer and the reflector. The potential for acoustic radiation force obtained by the matrix method is validated by comparing the matrix method results with those obtained by the finite element method when using an axisymmetric model of a single-axis acoustic levitator. After validation, the method is applied in the simulation of a noncontact manipulation system consisting of two 37.9-kHz Langevin-type transducers and a plane reflector. The manipulation system allows control of the horizontal position of a small levitated sphere from -6 mm to 6 mm, which is done by changing the phase difference between the two transducers. The horizontal position of the sphere predicted by the matrix method agrees with the horizontal positions measured experimentally with a charge-coupled device camera. The main advantage of the matrix method is that it allows simulation of non-symmetric acoustic levitators without requiring much computational effort.

Dynamics of the restoration of physical trails in the grass-cutting ant Atta capiguara (Hymenoptera, Formicidae)

ABSTRACT Dynamics of the restoration of physical trails in the grass-cutting ant Atta capiguara. Leaf-cutting ants of the genus Atta build long physical trails by cutting the vegetation growing on the soil surface and removing the small objects they find across their path. Little is known on the dynamics of trail construction in these ants. How much time do they need to build a trail? To answer this question we selected six trails belonging to two different nests of A. capiguara and removed on each trail a block of soil of 20 cm × 15 cm that included a portion of the physical trail. This block was then replaced by a new block of the same size that was removed in the pasture near the trail and that was uniformly covered by the same type of vegetation as that found on the block of soil that was removed. The time required to restore the trail was then evaluated by the length of the grass blades found along the former location of the trail. The results show that ants rapidly restore the portion of the physical trail that was interrupted, which suggests that they could also do the same after their trails have been recolonized by the vegetation.

De llibertat, autoritat i in/dependències (a la vida i l'obra de Maria-Mercè Marçal)

This article pays attention to two moments in the life and work (inseparably united) of Maria-Mercè Marçal. The first refers to a search of small objects presided by the moon. Taking this search as a motif, the freedom which the poet confers to the nocturnal light ¿mythical and magical symbol of femaleness- and, therefore, to that which symbolises the heavenly body, is revealed. The second moment revolves around the reflection of Marçal on the ¿female authority¿, a concept which this author, inspired by the philosophical community of Diotima, distinguishes from power. Throughout history, Maria-Mercè Marçal remarked, many women have gained strength from the free atribution of authority to other women, to their texts, to their experiences.

De llibertat, autoritat i in/dependències (a la vida i l'obra de Maria-Mercè Marçal)

This article pays attention to two moments in the life and work (inseparably united) of Maria-Mercè Marçal. The first refers to a search of small objects presided by the moon. Taking this search as a motif, the freedom which the poet confers to the nocturnal light ¿mythical and magical symbol of femaleness- and, therefore, to that which symbolises the heavenly body, is revealed. The second moment revolves around the reflection of Marçal on the ¿female authority¿, a concept which this author, inspired by the philosophical community of Diotima, distinguishes from power. Throughout history, Maria-Mercè Marçal remarked, many women have gained strength from the free atribution of authority to other women, to their texts, to their experiences.

CO2:n käyttö puhdistuksessa ja inerttinä kaasuna öljynjalostusympäristössä

Tutkimuksen tavoitteena on löytää CO2:lle puhdistus- ja inertointikohteita öljynjalostusympäristöstä. CO2:na käytettäisiin Porvoon vetylaitokselta sivutuotteena tulevaa CO2:a. Vetylaitokselta saatava CO2-virta ei ole riittävän puhdasta käytettäväksi suoraan pesuissa ja inertoinnissa. CO2:n eri olomuotoja voidaan käyttää puhdistuksessa. Tutkimuksen lähtökohtana olleen ylikriittisen CO2:n tehokkuus perustuu sen liuottavuuteen. Huonosti liukenevien aineiden liukoisuus ylikriittiseen CO2:in paranee lisäaineiden ja pinta-aktiivisten aineiden käytöllä. Kiinteä CO2 jäädyttää ja poistaa epäpuhtauden sublimoitumisesta aiheutuvan paineaallon voimasta. Kuivajääpuhdistus soveltuu parhaiten tasaisten pintojen puhdistamiseen. Ylikriittisellä CO2:lla onnistuu nykyisellä teknologialla vain pienien kappaleiden puhdistaminen. Kuivajääpuhdistuksen toimivuutta kokeiltiin käytännössä Neste Oilin Porvoon jalostamolla hyvin tuloksin. Tasaisilta pinnoilta saatiin poistetuksi bitumia ja rasvakerros. Käyttökustannusvertailussa osoittautui ylikriittistä CO2:a käyttävä laitteisto halvemmaksi ja kuivajääpuhallus kalliimmaksi kuin konventionaaliset menetelmät. Säiliöiden paineistamiseen ja inertointiin käytetään yleisesti N2:ä. N2:llä inertoitavia kohteita voitaisiin korvata CO2:lla. CO2:n käyttöä rajoittavia seikkoja on hinta ja sen reaktiivisuus alkalimetallien kanssa. Vertailtaessa näiden kahden liukoisuuksia hiilivetyihin osoittautui CO2 monin kerroin liukoisemmaksi. Tämän ominaisuuden ansiosta CO2 voisi olla hyvä väliaine laitteiden hiilivetyvapaaksi saattamisessa.

La revolución del cura Botero: Una disputa por las fuentes del derecho. Antioquia, 1835-1848.

En esta investigación se estudian los conflictos nacidos en la progresiva definición de las formas jurídicas y de saber que acompañaron el re-asentamiento de instituciones y grupos de poder después de la ruptura política con España. Este análisis se conduce mediante un estudio de caso, la historia de un sacerdote ilustrado que emprendió en 1835 una querella contra la enseñanza del materialismo y el ateísmo prevista en la reclasificación republicana de saberes. La Revolución del cura Botero se desarrolló en la Villa de la Candelaria y constituye un ejemplo histórico de un tipo de resistencia local a la derogación y suplantación de las viejas formas de producción jurídica y de ordenación social. El caso Botero sirve como pre-texto para estudiar una respuesta local a la iniciativa centralista de abrogación de una cultura material por la entrada en vigor de un modelo de ordenación formal de orientación legicéntrica y liberal, ilustra un tipo localizado de resistencia a la implantación del modelo republicano en Colombia. Mediante un caso y un exhaustivo ejercicio de reconstrucción documental se recrea un problema central de la cultura jurídica revolucionaria: la disputa por las fuentes del derecho, la verdad y el saber en el “tránsito” a la “modernidad jurídica”. En ella se propone un modo de hacer historia del derecho a partir de casos concretos, historia local y documentos no oficiales como forma de reivindicación pedagógica de los pequeños objetos, aquellos que ponen a prueba el funcionamiento real de mecanismos hegemónicos.

The aster mission: Exploring for the first time a triple system asteroid

2001 SN263 is a triple system asteroid. Although it was discovery in 2001, in 2008 astronomical observation carried out by Arecibo observatory revealed that it is actually a system with three bodies orbiting each other. The main central body is an irregular object with a diameter about 2.8 km, while the other two are small objects with less than 1 km across. This system presents an orbital eccentricity of 0.47, with perihelion of 1.04 and aphelion of 1.99, which means that it can be considered as a Near Earth Object. This interesting system was chosen as the target for the Aster mission - first Brazilian space exploration undertaking. A small spacecraft with 150 kg of total mass, 30 kg of payload with 110 W available for the instruments, is scheduled to be launched in 2015, and in 2018 it will approach and will be put in orbit of the triple system. This spacecraft will use electric propulsion and in its payload it will carry image camera, laser rangefinder, infrared spectrometer, mass spectrometer, and experiments to be performed in its way to the asteroid. This mission represents a great challenge for the Brazilian space program. It is being structured to allow the full engagement of the Brazilian universities and technological companies in all the necessary developments to be carried out. In this paper, we present some aspects of this mission, including the transfer trajectories to be used, and details of buss and payload subsystems that are being developed and will be used. Copyright ©2010 by the International Astronautical Federation. All rights reserved.

Comportamento de cuidado da prole da saúva-limão Atta sexdens rubropilosa Forel, 1908 (Hymenoptera, formicidae)

Pós-graduação em Ciências Biológicas (Zoologia) - IBRC

A produção de pequenos objetos de madeira: um estudo de caso: a empresa "Móveis Souza"

A pesquisa foi organizada em torno da produção de um pequeno objeto de madeira, procurando-se acompanhar sua biografia, desde o lugar de sua criação e fabricação a empresa Móveis Souza- , onde trabalham o proprietário e um dos filhos, ambos marceneiros, e a esposa do primeiro, na administração. A criação do objeto, vista como arte pelo proprietário, e o tipo de organização da pequena empresa revelam-se condições indispensáveis na produção do pequeno objeto. Mostra-se em que circunstâncias a empresa passa a utilizar sobras de madeira e como esta decisão implica no início de um processo de ambientalização da produção, que por sua vez se constitui em um dos elementos centrais de invenção do regional. A introdução do design no estado do Pará, media a invenção de um regional paraense e amazônico.

A ring system detected around the Centaur (10199) Chariklo

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Mappatura dell'impervious e consumo di suolo tramite analisi di change detection in telerilevamento

Il telerilevamento rappresenta un efficace strumento per il monitoraggio dell’ambiente e del territorio, grazie alla disponibilità di sensori che riprendono con cadenza temporale fissa porzioni della superficie terrestre. Le immagini multi/iperspettrali acquisite sono in grado di fornire informazioni per differenti campi di applicazione. In questo studio è stato affrontato il tema del consumo di suolo che rappresenta un’importante sfida per una corretta gestione del territorio, poiché direttamente connesso con i fenomeni del runoff urbano, della frammentazione ecosistemica e con la sottrazione di importanti territori agricoli. Ancora non esiste una definizione unica, ed anche una metodologia di misura, del consumo di suolo; in questo studio è stato definito come tale quello che provoca impermeabilizzazione del terreno. L’area scelta è quella della Provincia di Bologna che si estende per 3.702 km2 ed è caratterizzata a nord dalla Pianura Padana e a sud dalla catena appenninica; secondo i dati forniti dall’ISTAT, nel periodo 2001-2011 è stata la quarta provincia in Italia con più consumo di suolo. Tramite classificazione pixel-based è stata fatta una mappatura del fenomeno per cinque immagini Landsat. Anche se a media risoluzione, e quindi non in grado di mappare tutti i dettagli, esse sono particolarmente idonee per aree estese come quella scelta ed inoltre garantiscono una più ampia copertura temporale. Il periodo considerato va dal 1987 al 2013 e, tramite procedure di change detection applicate alle mappe prodotte, si è cercato di quantificare il fenomeno, confrontarlo con i dati esistenti e analizzare la sua distribuzione spaziale.

Drug delivery, entry and intracellular trafficking of polymeric nanoparticles

Polymere Nanopartikel sind kleine Teilchen, die vielseitige Einsatzmöglichkeiten für den Transport von Wirkstoffen bieten. Da Nanomaterialien in diesen biomedizinischen Anwendungen oft mit biologischen Systemen in Berührung kommen, erfordert das eine genaue Untersuchung ihrer gegenseitigen Wechselwirkungen. In diesem speziellen Forschungsgebiet, welches sich auf die Interaktionen von Nanomaterialien mit biologischen Komponenten konzentriert, wurde bereits eine Vielzahl verschiedener Nanopartikel-Zell-Interaktionen (z. B. Nanotoxizität, Wirkstofftransport-mechanismen) analysiert. Bezüglich der Untersuchungen zu nanopartikulären Wirkstofftransport-mechanismen ist es im Allgemeinen akzeptiert, dass ein erfolgreicher zellulärer Transport hauptsächlich von der Aufnahme des Nanotransporters abhängt. Deshalb analysieren wir in dieser Arbeit (1) den Wirkstofftransportmechanismus für biologisch-abbaubare eisenhaltige Poly-L-Milchsäure Nanopartikel (PLLA-Fe-PMI) sowie (2) die Aufnahmemechanismen und die intrazellulären Transportwege von nicht-abbaubaren superparamagnetischen Polystyrolnanopartikeln (SPIOPSN). rnIn dieser Arbeit identifizieren wir einen bisher unbekannten und nicht-invasiven Wirkstoff-transportmechanismus. Dabei zeigt diese Studie, dass der subzelluläre Transport der nanopartikulärer Fracht nicht unbedingt von einer Aufnahme der Nanotransporter abhängt. Der identifizierte Arzneimitteltransportmechanismus basiert auf einem einfachen physikochemischen Kontakt des hydrophoben Poly-L-Milchsäure-Nanopartikels mit einer hydrophoben Oberfläche, wodurch die Freisetzung der nanopartikulären Fracht ausgelöst wird. In Zellexperimenten führt die membranvermittelte Freisetzung der nanopartikulären Fracht zu ihrem sofortigen Transport in TIP47+- und ADRP+- Lipidtröpfchen. Der Freisetzungsmechanismus („kiss-and-run") kann durch die kovalente Einbindung des Frachtmoleküls in das Polymer des Nanopartikels blockiert werden.rnWeiterhin wird in Langzeitversuchen gezeigt, dass die Aufnahme der untersuchten polymeren Nanopartikel von einem Makropinozytose-ähnlichen Mechanismus gesteuert wird. Im Laufe dieser Arbeit werden mehrere Faktoren identifiziert, die in diesem Aufnahmemechanismus eine Rolle spielen. Darunter fallen unter anderem die kleinen GTPasen Rac1 und ARF1, die die Aufnahme von SPIOPSN beeinflussen. Darauffolgend werden die intrazellulären Transportwege der Nanopartikel untersucht. Mit Hilfe eines neuartigen Massenspektrometrieansatzes wird der intrazelluläre Transport von nanopartikelhaltigen endozytotischen Vesikeln rekonstruiert. Intensive Untersuchungen identifizieren Marker von frühen Endosomen, späten Endosomen/ multivesikulären Körpern, Rab11+- Endosomen, Flotillin-Vesikeln, Lysosomen und COP-Vesikeln. Schließlich wird der Einfluss des lysosomalen Milieus auf die Proteinhülle der Nanopartikel untersucht. Hier wird gezeigt, dass die adsorbierte Proteinhülle auf den Nanopartikeln in die Zelle transportiert wird und anschließend im Lysosom abgebaut wird. rnInsgesamt verdeutlicht diese Arbeit, dass die klassische Strategie des nanopartikulären und invasiven Wirkstofftransportmechanismuses überdacht werden muss. Weiterhin lässt sich aus den Daten schlussfolgern, dass polymere Nanopartikel einem atypischen Makropinozytose-ähnlichen Aufnahmemechanismus unterliegen. Dies resultiert in einem intrazellulären Transport der Nanopartikel von Makropinosomen über multivesikuläre Körperchen zu Lysosomen.rn

Non-Contact Documentation of Physical Characteristics of Ecstasy Tablets, Hemp Coins, and Imprint Punches by using 3D Optical Surface Scanning

The description of seized illicit ecstasy tablets and other pressed drug products is an important step in casework. The physical and visual analysis and the description of the characteristics can be employed for intelligence purposes. Besides photography and manual measurements of dimensions, some optical instruments are employed for detailed measurements of physical characteristics. In this work, the method of 3D surface digitizing is introduced as a suitable tool for highly accurate documentation of small objects, especially for pressed drug products. The resulting detailed information about the geometry, and the results of an automatic comparison of apparently uniform tablets and coins with punches, can support drug intelligence.