The effect of hook/bait size and angling technique on the hooking location and the catch of recreationally caught black bream Acanthopagrus butcheri

The black bream Acanthopagrus butcheri recreational fishery is the largest estuarine fishery in Victoria. This fishery is managed through legal-minimum length and daily bag limits. The success of this management strategy requires a high survival rate for released fish. Deep-hooking is known to reduce the chance of fish survival after recreational capture and release. This study investigated the potential to reduce deep-hooking and the number of under-size A. butcheri caught by varying angling gear and techniques. Three sizes of long shank hook (small [size 8], medium [size 4] and large [size 1/0]) and two angling techniques (slack line and tight line) were tested for their deep-hooking rates and selectivity characteristics. Increasing the hook size from small to large decreased the likelihood of deep-hooking by 6.6 times (95% CI 2.3–16.3 times). Fishing with a tight line instead of a slack line decreased the chance of deep-hooking by almost 100% (95% CI 0.8–3.6). Fishing with a large hook instead of a small hook significantly (F = 6.71, df = 2, P = <0.001) increased the mean A. butcheri length, although this mean size increase was less than 1 cm. This study was able to identify angling gear and angling technique manipulations that reduced the rate of deep-hooking when targeting A. butcheri in Victorian estuaries.

Mesopelagic fish abundance and particle size spectrum analysis from Maria S. Merian cruise MSM26, spring 2013

One of the goals of EU BASIN is to understand variability in production across the Atlantic and the impact of this variability on higher trophic levels. One aspect of these investigations is to examine the biomes defined by Longhurst (2007). These biomes are largely based on productivity measured with remote sensing. During MSM 26, mesopelagic fish and size-spectrum data were collected to test the biome classifications of the north Atlantic. In most marine systems, the size-spectrum is a decay function with more, smaller organisms and fewer larger organisms. The intercept of the size-spectrum has been linked to overall productivity while the slope represents the "rate of decay" of this productivity (Zhou 2006, doi:10.1093/plankt/fbi119). A Laser In-Situ Scattering Transmissometer was used to collect size-spectrum data and net collections were made to capture mesopelagic fish. The relationship among the mesopelagic fish size and abundance distributions will be compared to the estimates of production from the size-spectrum data to evaluate the biomes of the stations occupied during MSM 26.

Particle size of Saharan dust in the Atlantic Ocean, from October 2012 to November 2013

Mineral dust has a large impact on regional and global climate, depending on its particle size. Especially in the Atlantic Ocean downwind of the Sahara, the largest dust source on earth, the effects can be substantial but are poorly understood. This study focuses on seasonal and spatial variations in particle size of Saharan dust deposition across the Atlantic Ocean, using an array of submarine sediment traps moored along a transect at 12° N. We show that the particle size decreases downwind with increased distance from the Saharan source, due to higher gravitational settling velocities of coarse particles in the atmosphere. Modal grain sizes vary between 4 and 33 µm throughout the different seasons and at five locations along the transect. This is much coarser than previously suggested and incorporated into climate models. In addition, seasonal changes are prominent, with coarser dust in summer, and finer dust in winter and spring. Such seasonal changes are caused by transport at higher altitudes and at greater wind velocities during summer than in winter. Also the latitudinal migration of the dust cloud, associated with the Intertropical Convergence Zone, causes seasonal differences in deposition as the summer dust cloud is located more to the north, and more directly above the sampled transect. Furthermore, increased precipitation and more frequent dust storms in summer coincide with coarser dust deposition. Our findings contribute to understanding Saharan dust transport and deposition relevant for the interpretation of sedimentary records for climate reconstructions, as well as for global and regional models for improved prediction of future climate.

Valorization of solid tire wastes available in Bangladesh by thermal treatment

In this study available solid tire wastes in Bangladesh were characterized through proximate and ultimate analyses, gross calorific values and thermogravimetric analysis to investigate their suitability as feedstock for thermal recycling by pyrolysis technology. A new approach in heating system, fixedbed fire-tube heating pyrolysis reactor has been designed and fabricated for the recovery of liquid hydrocarbons from solid tire wastes. The tire wastes were pyrolysed in the internally heated fixed-bed fire-tube heating reactor and maximum liquid yield of 46-55 wt% of solid tire waste was obtained at a temperature of 475 oC, feed size 4 cm3, with a residence time of 5 s under N2 atmosphere. The liquid products were characterized by physical properties, elemental analysis, FT-IR, 1H-NMR, GC MS techniques and distillation. The results show that the liquid products are comparable to petroleum fuels whereas fractional distillations and desulphurization are essential to be used as alternative for diesel engine fuels.

Layered silicates in Chondritic Porous Aggregate W7029*A : a case of primary growth

An important subset of extraterrestrial particles that reach the Earth's stratosphere include the so-called Chondritic Porous Aggregates (CPA's) [1-3]. In general, CPA's have a fluffy morphology and consist of numerous (>104)subparticles that are often <100A in size [4]. Mineral species in CPA's include Mg-rich pyroxene and olivine, Fe- and (Fe,Ni)-sulphides, taenite, Fe,Ni-carbides, magnetite, Ti-metal, a Bi-phase (metal or oxide), and variable amounts of carbonaceous material [1, 5-7]. Hydrated silicates are rare in CPA's and are limited to aggregates that have not been severely altered (thermo-metamorphosed) during atmospheric entry [8]. The presence of hydrated silicates in one cosmic dust particle was established by X-ray diffraction [2] and has been inferred in others by infra-red spectroscopy [8]. If CPA's are cometary, their mineralogy and morphology suggest that at least two episodes of aggregation occurred and that variations in porosity may be related to local differences in ice-to-dust ratio [3].

Correlating flow induced shear stress and chondrocytes activity in micro-porous scaffold using computational fluid dynamics and rapid prototyping

Flow induced shear stress plays an important role in regulating cell growth and distribution in scaffolds. This study sought to correlate wall shear stress and chondrocytes activity for engineering design of micro-porous osteochondral grafts based on the hypothesis that it is possible to capture and discriminate between the transmitted force and cell response at the inner irregularities. Unlike common tissue engineering therapies with perfusion bioreactors in which flow-mediated stress is the controlling parameter, this work assigned the associated stress as a function of porosity to influence in vitro proliferation of chondrocytes. D-optimality criterion was used to accommodate three pore characteristics for appraisal in a mixed level fractional design of experiment (DOE); namely, pore size (4 levels), distribution pattern (2 levels) and density (3 levels). Micro-porous scaffolds (n=12) were fabricated according to the DOE using rapid prototyping of an acrylic-based bio-photopolymer. Computational fluid dynamics (CFD) models were created correspondingly and used on an idealized boundary condition with a Newtonian fluid domain to simulate the dynamic microenvironment inside the pores. In vitro condition was reproduced for the 3D printed constructs seeded by high pellet densities of human chondrocytes and cultured for 72 hours. The results showed that cell proliferation was significantly different in the constructs (p<0.05). Inlet fluid velocity of 3×10-2mms-1 and average shear stress of 5.65×10-2 Pa corresponded with increased cell proliferation for scaffolds with smaller pores in hexagonal pattern and lower densities. Although the analytical solution of a Poiseuille flow inside the pores was found insufficient for the description of the flow profile probably due to the outside flow induced turbulence, it showed that the shear stress would increase with cell growth and decrease with pore size. This correlation demonstrated the basis for determining the relation between the induced stress and chondrocyte activity to optimize microfabrication of engineered cartilaginous constructs.

Evidence of clustering in an aqueous electrolyte solution: a small-angle X-ray scattering study

The work reported hen was motivated by a desire to verify the existence of structure - specifically MP-rich clusters induced by sodium bromide (NaBr) in the ternary liquid mixture 3-methylpyridine (Mf) + water(W) + NaBr. We present small-angle X-ray scattering (SAXS) measurements in this mixture. These measurements were obtained at room temperature (similar to 298 K) in the one-phase region (below the relevant lower consolute points, T(L)s) at different values of X (i.e., X = 0.02 - 0.17), where X is the weight fraction of NaBr in the mixture. Cluster-size distribution, estimated on the assumption that the clusters are spherical, shows systematic behaviour in that the peak of the distribution shifts rewards larger values of cluster radius as X increases. The largest spatial extent of the clusters (similar to 4.5 nm) is seen at X = 0.17. Data analysis assuming arbitrary shapes and sizes of clusters gives a limiting value of cluster size (- 4.5 nm) that is not very sensitive to X. It is suggested that the cluster size determined may not be the same as the usual critical-point fluctuations far removed from the critical point (T-L). The influence of the additional length scale due to clustering is discussed from the standpoint of crossover from Ising to mean-field critical behaviour, when moving away from the T-L.

Enhancement of organic phase controlled extraction of copper by activated carbon

The addition of activated carbon particles (Darco-G, average size 4.3,μm) is shown to enhance the initial rate of extraction of copper in a Lewis cell by a mixture of α- and β-hydroxyoximes, when the rate of extraction is controlled by resistances in the organic phase. It is likely that the copper complex is adsorbed by carbon near the interace and partially released in the bulk. The enhancing effect of carbon vanishes when toluene is used as a diluent instead of heptane, presumably because toluene preferentially adsorbs on its surface.

Optical and Electronic Properties of Conjugated Polymer -Nanocluster Semiconductor Hybrid Systems

Conjugated polymers are intensively pursued as candidate materials for emission and detection devices with the optical range of interest determined by the chemical structure. On the other hand the optical range for emission and detection can also be tuned by size selection in semiconductor nanoclusters. The mechanisms for charge generation and separation upon optical excitation, and light emission are different for these systems. Hybrid systems based on these different class of materials reveal interesting electronic and optical properties and add further insight into the individual characteristics of the different components. Multilayer structures and blends of these materials on different substrates were prepared for absorption, photocurrent (Iph), photoluminescence (PL) and electroluminscence (EL) studies. Polymers chosen were derivatives of polythiophene (PT) and polyparaphenylenevinylene (PPV) along with nanoclusters of cadmium sulphide of average size 4.4 nm (CdS-44). The photocurrent spectral response in these systems followed the absorption response around the band edges for each of the components and revealed additional features, which depended on bias voltage, thickness of the layers and interfacial effects. The current-voltage curves showed multi-component features with emission varying for different regimes of voltage. The emission spectral response revealed additive features and is discussed in terms of excitonic mechanisms.

Three Dimensional Fluorescence Imaging Using Multiple Light-Sheet Microscopy

We developed a multiple light-sheet microscopy (MLSM) system capable of 3D fluorescence imaging. Employing spatial filter in the excitation arm of a SPIM system, we successfully generated multiple light-sheets. This improves upon the existing SPIM system and is capable of 3D volume imaging by simultaneously illuminating multiple planes in the sample. Theta detection geometry is employed for data acquisition from multiple specimen layers. This detection scheme inherits many advantages including, background reduction, cross-talk free fluorescence detection and high-resolution at long working distance. Using this technique, we generated 5 equi-intense light-sheets of thickness approximately 7: 5 mm with an inter-sheet separation of 15 mm. Moreover, the light-sheets generated by MLSM is found to be 2 times thinner than the state-of-art SPIM system. Imaging of fluorescently coated yeast cells of size 4 +/- 1 mm (encaged in Agarose gel-matrix) is achieved. Proposed imaging technique may accelerate the field of fluorescence microscopy, cell biology and biophotonics.

郭永怀文集

Determination of some dominant genetic characteristics and morpho-meristic features for selection of rainbow trout (Oncorhynchus mykiss) broodstocks

In this study, Iranian and French male and female Oncorhynchus mykiss broodstocks were divided into two groups 50 and 24 respectively in Research center of genetic and breeding of coldwater fishes, Yasouj, Iran and the genetic structure of them was investigated using 6 microsatellite markers. Then 19 morphometric and 5 meristic of broodstock were measured and compared in two populations. Along with broodstock maturation, fertilization 1:1(female:male) were randomly assigned and occurred in 25 of 12 Iranian and French treatment respectively. Reproductive parameters were recorded for the whole family. Average number of observed alleles in Iranian and French stocks was 6.68 and 6.83, respectively. Average number of effective alleles in Iranian and French stocks was 3.13 and 3.45 respectively. Fixation index Fst was calculated based on allelic frequency between two stocks was 0.058 with significant difference between 2 stocks. Morphometric analysis showed significant difference between two stocks in 8 characteristics. Meristic characters was without significant difference in broodstock groups. Eyed percentage for french broodstock calculated zero and deleted. Fertilization rate (100-0), the eyed percentage (98- 0), The hatch rate (98-0), the average fecundity 4114.708, the average eggs size 4.88 mm, Survival in the first three months 19-73% calculated for Iranian broodstocks. Considering the quality of eggs and larvae at different stages and selection between the different family and the within family remained 10 treatments and are kept as future broodstocks. The relationship between fecundity - egg size, fecundity - weight , fecundity - length, egg size- weight was performed using regression. The results showed that Fecundity was influenced more by weight and productive length. The research is beginning to ID the broodstock in our country.

Effects of reinforcement filler and temperature on the stability of beta-crystal in glass bead filled polypropylene

The effects of crystallization temperature (T,), glass bead content and its size on the, formation of beta-crystal and structural stability of originally formed beta-crystal in glass bead filled polypropylene (PP) were examined. The differential scanning calorimetry (DSC) measurements indicated that the amount of beta-phase in PP crystals was a function of the crystallization temperature and glass bead content. For a constant crystallization temperature, it was observed that the amount of beta-crystal initially increased with increase in glass bead content up to 30 wt.%, and then decreased slightly with further increase in the filler content. From the DSC data, a disorder parameter (S) was derived to define the structural stability of originally formed beta-crystals. The structural stability of originally formed beta-crystals was enhanced with increase in either the crystallization temperature or the glass bead content. Also, the influence of glass bead size (4-66 mu m) on the formation and stability of beta-crystals in PP/glass bead blends was studied. Large glass bead particles suppressed the formation and decreased the stability of beta-crystals.

Analysis of outcome and cancer stem cells status in patients with resectable pancreatic adenocarcinoma

RESUMO: Actualmente, a única possibilidade de cura para doentes com adenocarcinoma do pâncreas (PDAC) é a ressecção cirúrgica, no início deste estudo, perguntamo-nos se os predictores clínico-patológicos clássicos de prognostico poderiam ser validados em uma grande cohort de doentes com cancro do pâncreas ressecável e se outros predictores clínicos poderiam ter um papel na decisão de que doentes beneficiariam de ressecção cirúrgica. No capítulo 2, observamos que até 30% dos doentes morrem no primeiro ano após a ressecção cirúrgica, pelo que o nosso objectivo foi determinar factores pré-operatórios que se correlacionam com mortalidade precoce após ressecação cirúrgica com recurso a um instrumento estatisticamente validado, o Charlson-Age Comorbidity Index (CACI), determinamos que um CACI score superior a 4 foi preditivo de internamentos prolongados (p <0,001), complicações pós-operatórias (p = 0,042), e mortalidade em 1 ano pós- ressecção cirúrgica (p <0,001). Um CACI superior a 6 triplicou a mortalidade no primeiro ano pós-cirurgia e estes doentes têm menos de 50% de probabilidade de estarem vivos um ano após a cirurgia. No capítulo 3, o nosso objectivo foi identificar uma proteína de superfície que se correlacionasse estatisticamente com o prognostico de doentes com adenocarcinoma do pâncreas e permitisse a distinção de subgrupos de doentes de acordo com as suas diferenças moleculares, perguntamo-nos ainda se essa proteína poderia ser um marcador de células-estaminais. No nosso trabalho anterior observamos que as células tumorais na circulação sanguínea apresentavam genes com características bifenotípica epitelial e mesenquimal, enriquecimento para genes de células estaminais (ALDH1A1 / ALDH1A2 e KLF4), e uma super-expressão de genes da matriz extracelular (colagénios, SPARC, e DCN) normalmente identificados no estroma de PDAC. Após a avaliação dos tumores primários com RNA-ISH, muitos dos genes identificados, foram encontrados co-localizando em uma sub-população de células na região basal dos ductos pancreáticos malignos. Além disso, observamos que estas células expressam o marcador SV2A neuroendócrino, e o marcador de células estaminais ALDH1A1/2. Em comparação com tumores negativos para SV2, os doentes com tumores SV2 positivos apresentaram níveis mais baixos de CA 19-9 (69% vs. 52%, p = 0,012), tumores maiores (> 4 cm, 23% vs. 10%, p = 0,0430), menor invasão de gânglios linfáticos (69% vs. 86%, p = 0,005) e tumores mais diferenciados (69% vs. 57%, p = 0,047). A presença de SV2A foi associada com uma sobrevida livre de doença mais longa (HR: 0,49 p = 0,009) bem como melhor sobrevida global (HR: 0,54 p = 0,018). Em conjunto, esta informação aponta para dois subtipos diferentes de adenocarcinoma do pâncreas, e estes subtipos co-relacionam estatisticamente com o prognostico de doentes, sendo este subgrupo definido pela presença do clone celular SV2A / ALDH1A1/2 positivo com características neuroendócrinas. No Capítulo 4, a expressão de SV2A no cancro do pâncreas foi validado em linhas celulares primárias. Demonstramos a heterogeneidade do adenocarcinoma do pâncreas de acordo com características clonais neuroendócrinas. Ao comparar as linhas celulares expressando SV2 com linhas celulares negativas, verificamos que as linhas celulares SV2+ eram mais diferenciadas, diferindo de linhas celulares SV2 negativas no que respeita a mutação KRAS, proliferação e a resposta à quimioterapia. No capítulo 5, perguntamo-nos se o clone celular SV2 positivo poderia explicar a resistência a quimioterapia observada em doentes. Observamos um aumento absoluto de clones celulares expressando SV2A, em múltiplas linhas de evidência - doentes, linhas de células primárias e xenotransplantes. Embora, tenhamos sido capazes de demonstrar que o adenocarcinoma do pâncreas é uma doença heterogénea, consideramos que a caracterização genética destes clones celulares expressando SV2A é de elevada importância. Pretendemos colmatar esta limitação com as seguintes estratégias: Após o tratamento com quimioterapia neoadjuvante na nossa coorte, realizamos microdissecação a laser das amostras primarias em parafina, de forma a analisar mutações genéticas observadas no adenocarcinoma pancreático; em segundo lugar, pretendemos determinar consequências de knockdown da expressão de SV2A em nossas linhas celulares seguindo-se o tratamento com gemicitabina para determinação do papel funcional de SV2A; finalmente, uma vez que os nossos esforços anteriores com um promotor - repórter e SmartFlare ™ falharam, o próximo passo será realizar RNA-ISH PrimeFlow™ seguido de FACS e RNA-seq para caracterização deste clone celular. Em conjunto, conseguimos provar com várias linhas de evidência, que o adenocarcinoma pancreático é uma doença heterogénea, definido por um clone de células que expressam SV2A, com características neuroendócrinas. A presença deste clone no tecido de doentes correlaciona-se estatisticamente com o prognostico da doença, incluindo sobrevida livre de doença e sobrevida global. Juntamente com padrões de proliferação e co-expressão de ALDH1A1/2, este clone parece apresentar um comportamento de células estaminais e está associado a resistência a quimioterapia, uma vez que a sua expressão aumenta após agressão química, quer em doentes, quer em linhas de células primárias.----------------------------- ABSTRACT: Currently, the only chance of cure for patients with pancreatic adenocarcinoma is surgical resection, at the beginning of my thesis studies, we asked if the classical clinicopathologic predictors of outcome could be validated in a large cohort of patients with early stage pancreatic cancer and if other clinical predictors could have a role on deciding which patients would benefit from surgery. In chapter 2, we found that up to 30% of patients die within the first year after curative intent surgery for pancreatic adenocarcinoma. We aimed at determining pre-operative factors that would correlate with early mortality following resection for pancreatic cancer using a statistically validated tool, the Charlson-Age Comorbidity Index (CACI). We found that a CACI score greater than 4 was predictive of increased length of stay (p<0.001), post-operative complications (p=0.042), and mortality within 1-year of pancreatic resection (p<0.001). A CACI score of 6 or greater increased 3-fold the odds of death within the first year. Patients with a high CACI score have less than 50% likelihood of being alive 1 year after surgery. In chapter 3 we aimed at identifying a surface protein that correlates with patient’s outcome and distinguishes sub-groups of patients according to their molecular differences and if this protein could be a cancer stem cell marker. The most abundant class of circulating tumor cells identified in our previous work was found to have biphenotypic features of epithelial to mesenchymal transition, enrichment for stem-cell associated genes (ALDH1A1/ALDH1A2 and KLF4), and an overexpression of extracellular matrix genes (Collagens, SPARC, and DCN) normally found in the stromal microenvironment of PDAC primary tumors. Upon evaluation of matched primary tumors with RNA-ISH, many of the genes identified were found to co-localize in a sub-population of cells at the basal region of malignant pancreatic ducts. In addition, these cells expressed the neuroendocrine marker SV2A, and the stem cell marker ALDH1A1/2. Compared to SV2 negative tumors, patients with SV2 positive tumors were more likely to present with lower CA 19-9 (69% vs. 52%, p = 0.012), bigger tumors (size > 4 cm, 23% vs. 10%, p= 0.0430), less nodal involvement (69% vs. 86%, p = 0.005) and lower histologic grade (69% vs. 57%, p = 0.047). The presence of SV2A expressing cells was associated with an improved disease free survival (HR: 0.49 p=0.009) and overall survival (HR: 0.54 p=0.018) and correlated linearly with ALDH1A2. Together, this information points to two different sub-types of pancreatic adenocarcinoma, and these sub-types correlated with patients’ outcome and were defined by the presence of a SV2A/ ALDH1A1/2 expressing clone with neuroendocrine features. In Chapter 4, SV2A expression in cancer was validated in primary cell lines. We were able to demonstrate pancreatic adenocarcinoma heterogeneity according to neuroendocrine clonal features. When comparing SV2 expressing cell lines with SV2 negative cell lines, we found that SV2+ cell lines were more differentiated and differ from SV2 negative cell lines regarding KRAS mutation, proliferation and response to chemotherapy. In Chapter 5 we aimed at determining if this SV2 positive clone could explain chemoresistance observed in patients. We found an absolute increase in SV2A expressing cells, with multiple lines of evidence, in patients, primary cell lines and xenografts. Although, we have been able to show evidence that pancreatic adenocarcinoma is a heterogeneous disease, our findings warrant further investigation. To further characterize SV2A expressing clones after treatment with neoadjuvant chemotherapy in our cohort, we have performed laser capture microdissection of the paraffin embedded tissue in this study and will analyze the tissue for known genetic mutations in pancreatic adenocarcinoma; secondly, we want to know what will happen after knocking down SV2A expression in our cell lines followed by treatment with gemcitabine to determine if SV2A is functionally important; finally, since our previous efforts with a promoter – reporter and SmartFlare™ have failed, we will utilize a novel PrimeFlow™ RNA-ISH assay followed by FACS and RNA sequencing to further characterize this cellular clone. Overall our data proves, with multiple lines of evidence, that pancreatic adenocarcinoma is a heterogeneous disease, defined by a clone of SV2A expressing cells, with neuroendocrine features. The presence of this clone in patients’ tissue correlates with patient’s disease free survival and overall survival. Together with patterns of proliferation and ALDH1A1/2 co-expression, this clone seems to present a stem-cell-like behavior and is associated with chemoresistance, since it increases after chemotherapy, both in patients and primary cell lines.

Complete genome sequence of Rhizobium leguminosarum bv trifolii strain WSM2304, an effective microsymbiont of the South American clover Trifolium polymorphum

Rhizobium leguminosarum bv. trifolii is the effective nitrogen fixing microsymbiont of a diverse range of annual and perennial Trifolium (clover) species. Strain WSM2304 is an aerobic, motile, non-spore forming, Gram-negative rod isolated from Trifolium polymorphum in Uruguay in 1998. This microsymbiont predominated in the perennial grasslands of Glencoe Research Station, in Uruguay, to competitively nodulate its host, and fix atmospheric nitrogen. Here we describe the basic features of WSM2304, together with the complete genome sequence, and annotation. This is the first completed genome sequence for a nitrogen fixing microsymbiont of a clover species from the American centre of origin. We reveal that its genome size is 6,872,702 bp encoding 6,643 protein-coding genes and 62 RNA only encoding genes. This multipartite genome was found to contain 5 distinct replicons; a chromosome of size 4,537,948 bp and four circular plasmids of size 4,537,948, 1,266,105, 501,946, 308,747 and 257,956 bp.