Biomass estimation of Triplectides egleri Sattler (Trichoptera, Leptoceridae) in a stream at Ducke Reserve, Central Amazonia

ABSTRACT Biomass is a fundamental measure for understanding the structure and functioning (e.g. fluxes of energy and nutrients in the food chain) of aquatic ecosystems. We aim to provide predictive models to estimate the biomass of Triplectides egleri Sattler, 1963, in a stream in Central Amazonia, based on body and case dimensions. We used body length, head-capsule width, interocular distance and case length and width to derive biomass estimations. Linear, exponential and power regression models were used to assess the relationship between biomass and body or case dimensions. All regression models used in the biomass estimation of T. egleri were significant. The best fit between biomass and body or case dimensions was obtained using the power model, followed by the exponential and linear models. Body length provided the best estimate of biomass. However, the dimensions of sclerotized structures (interocular distance and head-capsule width) also provided good biomass predictions, and may be useful in estimating biomass of preserved and/or damaged material. Case width was the dimension of the case that provided the best estimate of biomass. Despite the low relation, case width may be useful in studies that require low stress on individuals.

Consequences of warming and resource quality on the stoichiometry and nutrient cycling of a stream shredder

As a result of climate change, streams are warming and their runoff has been decreasing in most temperate areas. These changes can affect consumers directly by increasing their metabolic rates and modifying their physiology and indirectly by changing the quality of the resources on which organisms depend. In this study, a common stream detritivore (Echinogammarus berilloni Catta) was reared at two temperatures (15 and 20°C) and fed Populus nigra L. leaves that had been conditioned either in an intermittent or permanent reach to evaluate the effects of resource quality and increased temperatures on detritivore performance, stoichiometry and nutrient cycling. The lower quality (i.e., lower protein, soluble carbohydrates and higher C:P and N:P ratios) of leaves conditioned in pools resulted in compensatory feeding and lower nutrient retention capacity by E. berilloni. This effect was especially marked for phosphorus, which was unexpected based on predictions of ecological stoichiometry. When individuals were fed pool-conditioned leaves at warmer temperatures, their growth rates were higher, but consumers exhibited less efficient assimilation and higher mortality. Furthermore, the shifts to lower C:P ratios and higher lipid concentrations in shredder body tissues suggest that structural molecules such as phospholipids are preserved over other energetic C-rich macromolecules such as carbohydrates. These effects on consumer physiology and metabolism were further translated into feces and excreta nutrient ratios. Overall, our results show that the effects of reduced leaf quality on detritivore nutrient retention were more severe at higher temperatures because the shredders were not able to offset their increased metabolism with increased consumption or more efficient digestion when fed pool-conditioned leaves. Consequently, the synergistic effects of impaired food quality and increased temperatures might not only affect the physiology and survival of detritivores but also extend to other trophic compartments through detritivore-mediated nutrient cycling.

A laboratory study on feeding plasticity of the shredder Sericostoma vittatum Rambur (Sericostomatidae)

Since litter input and availability of leaves in many streams is highly seasonal in Portugal, we investigated whether Sericostoma vittatum, a typical shredder, was able to grow using alternative food sources. To test this hypothesis we fed S. vittatum with Alnus glutinosa (alder, CPOM, coarse particulate organic matter), leaf powder from A. glutinosa and Acacia dealbata and FPOM (fine particulate organic matter) from a 5th and a > 6th order river, the macrophyte Myriophyllum aquaticum and biofilm. Growth in S. vittatum was significantly influenced by the food item given (ANOVA, P = 0.0082). The food item promoting the highest growth was A. glutinosa, in the form of FPOM (6.48% day(-1)) and CPOM (4.24% day(-1)); all other forms of FPOM and biofilm provided relatively low growth rates (0.77-1.77% day(-1)). The macrophyte M. aquaticum was also used as food source by S. vittatum and promoted intermediate growth (1.96% day(-1)). Neither nitrogen, phosphorus nor caloric content was correlated with growth. However, since higher growth was achieved with alder, in the form of CPOM and FPOM, we concluded that the chemical content of food was more important for S. vittatum than the physical form of such food. This may partially explain why shredders are able to survive when leaves are scarce in streams.

Viability study of automobile shredder residue as fuel

Car Fluff samples collected from a shredding plant in Italy were classified based on particle size, and three different size fractions were obtained in this way. A comparison between these size fractions and the original light fluff was made from two different points of view: (i) the properties of each size fraction as a fuel were evaluated and (ii) the pollutants evolved when each size fraction was subjected to combustion were studied. The aim was to establish which size fraction would be the most suitable for the purposes of energy recovery. The light fluff analyzed contained up to 50 wt.% fines (particle size < 20 mm). However, its low calorific value and high emissions of polychlorinated dioxins and furans (PCDD/Fs), generated during combustion, make the fines fraction inappropriate for energy recovery, and therefore, landfilling would be the best option. The 50–100 mm fraction exhibited a high calorific value and low PCDD/F emissions were generated when the sample was combusted, making it the most suitable fraction for use as refuse-derived fuel (RDF). Results obtained suggest that removing fines from the original ASR sample would lead to a material product that is more suitable for use as RDF.

Solid waste shredding and shredder selection,

Updates Midwest Research Institute 1972 contract report.

Phylogeny of Grumichellini Morse, 1981 (Trichoptera: Leptoceridae) with the description of a new genus from southeastern Peru

Osflintia manu, new genus, new species, of long-horned caddisfly (Leptoceridae: Triplectidinae: Grumichellini) is described and illustrated from southeastern Peru. The phylogeny of Grumichellini Morse (Leptoceridae: Triplectidinae) is revisited and hypotheses of homology of some morphological characters are reconsidered. The monophyly of the tribe is corroborated and the phylogenetic relationships of its included genera are inferred to be (Triplexa (Gracilipsodes ((Grumichella, Amazonatolica) (Atanatolica, Osflintia, n. gen.)))) from adult and larval characters. Diagnostic characters of the new genus include the following: reduced tibial spur formula (2, 2, 2), loss of forewing crossvein sc-r1, hind wing discoidal cell closed, hind wing fork IV present, pair of long setae on tergum IX of the male genitalia, and pair of processes on the apex of segment X.

Description of the immature stages of Notalina morsei Holzenthal, 1986 (Trichoptera : Leptoceridae) and an updated key to larvae of Neotropical Leptoceridae genera

The endemic Neotropical long-horned caddisfly subgenus Notalina (Neonotalina) Holzenthal contains nine described species, but its immature stages are unknown. In this paper the larvae and pupae of Notalina morsei Holzenthal 1986 from southeastern Brazil are described and illustrated. Larvae of the subgenus are easily recognized from other Neotropical leptocerids by the following characters: ventral apotome which is broad anteriorly and narrow posteriorly; the metanotum with three sclerites; the metasternum bearing 10-12 setae; the gill arrangement, usually including ventral and dorsal filaments from abdominal segments II to VI; and abdominal tergite IX with 6 long and 4 short setae. An updated key to known larvae of Neotropical Leptoceridae genera is provided.

Deteção e previsão de falhas em equipamentos de produção industrial

As empresas nacionais deparam-se com a necessidade de responder ao mercado com uma grande variedade de produtos, pequenas séries e prazos de entrega reduzidos. A competitividade das empresas num mercado global depende assim da sua eficiência, da sua flexibilidade, da qualidade dos seus produtos e de custos reduzidos. Para se atingirem estes objetivos é necessário desenvolverem-se estratégias e planos de ação que envolvem os equipamentos produtivos, incluindo: a criação de novos equipamentos complexos e mais fiáveis, alteração dos equipamentos existentes modernizando-os de forma a responderem às necessidades atuais e a aumentar a sua disponibilidade e produtividade; e implementação de políticas de manutenção mais assertiva e focada no objetivo de “zero avarias”, como é o caso da manutenção preditiva. Neste contexto, o objetivo principal deste trabalho consiste na previsão do instante temporal ótimo da manutenção de um equipamento industrial – um refinador da fábrica de Mangualde da empresa Sonae Industria, que se encontra em funcionamento contínuo 24 horas por dia, 365 dias por ano. Para o efeito são utilizadas medidas de sensores que monitorizam continuamente o estado do refinador. A principal operação de manutenção deste equipamento é a substituição de dois discos metálicos do seu principal componente – o desfibrador. Consequentemente, o sensor do refinador analisado com maior detalhe é o sensor que mede a distância entre os dois discos do desfibrador. Os modelos ARIMA consistem numa abordagem estatística avançada para previsão de séries temporais. Baseados na descrição da autocorrelação dos dados, estes modelos descrevem uma série temporal como função dos seus valores passados. Neste trabalho, a metodologia ARIMA é utilizada para determinar um modelo que efetua uma previsão dos valores futuros do sensor que mede a distância entre os dois discos do desfibrador, determinando-se assim o momento ótimo da sua substituição e evitando paragens forçadas de produção por ocorrência de uma falha por desgaste dos discos. Os resultados obtidos neste trabalho constituem uma contribuição científica importante para a área da manutenção preditiva e deteção de falhas em equipamentos industriais.

Pirólise de resíduos de desmantelamento de veículos - produção de combustíveis líquidos

Dissertação para obtenção do Grau de Mestre em Energia e Bioenergia

Trichoptera (INSECTA) collected in Mediterranean river basins in the Iberian Peninsula: taxonomic remarks and notes on ecology

As a result of the GUADALMED project, undertaken in Iberian Mediterranean basins, to which were added samples taken by the junior author in the area, we collected numerous caddisfly larvae, pupae and adults. Some larvae were also reared in the lab to obtain adults and allow proper identification. A total of 90 species were identified, which accounts for more than a fourth of the species known in the Iberian Peninsula and Balearic Islands. Here we confirm the presence of doubtful species in the Iberian Peninsula (Glyphotaelius pellucidus) and we expand the distribution range of others (Lype reducta, Micrasema minimum, Limnephilus guadarramicus, Sericostoma pyrenaicum). Moreover, because of the unconformity of morphological larval characteristics with present taxonomical keys (Mesophylax aspersus) or lack of larvae descriptions (Allogamus mortoni, Stenophylax espanioli), here we include some relevant taxonomical aspects that are useful to identify larvae. A brief description of the larva of a possible new species of Hydropsyche (from now on H. gr. instabilis) is also given. Los tricópteros (Insecta) recolectados en las cuencas mediterráneas de la Península Ibérica: notas taxonómicas y requerimientos ecológicos Como resultado de los estudios realizados en el proyecto GUADALMED en las cuencas de los ríos mediterráneos peninsulares y otros muestreos realizados por la primera autora del trabajo se han recolectado numerosas larvas, pupas y adultos de tricópteros. Algunas larvas fueron criadas en el laboratorio para la obtención de adultos y con ello asegurar su identificación. Se han identificado un total de 90 especies que suponen más de una cuarta parte de las especies actualmente conocidas en la Península Ibérica y Baleares. En este trabajo se confirma la presencia, hasta ahora dudosa en la Península Ibérica, de algunas especies (Glyphotaelius pellucidus) y se amplia el área de distribución de otras (Lype reducta, Micrasema minimum, Limnephilus guadarramicus, Sericostoma pyrenaicum). Además, se incluyen algunos aspectos taxonómicos relevantes para la identificación de algunas larvas en futuros estudios, debido a que las claves ya existentes no describen correctamente la larva (Mesophylax aspersus) o porque se trata de larvas sin describir (Allogamus mortoni, Stenophylax espanioli). Se añade también una somera descripción de la larva de una posible nueva especie de Hydropsyche (citada aquí como H. gr. instabilis) y que requiere un estudio más detallado.

Health consultation : Exposure to fluff material from the Shine Brothers and noise concerns -- Spencer, Iowa (2011)

This letter has been prepared as a consultation to determine some potential health concerns raised by a resident of Spencer from exposure to wire shredder fluff material emitted by Shine Brothers metal salvaging facility in Spencer, Iowa on July 10, 2011 and, a concern regarding the health impacts from the level of noise measured by a resident near the metal salvaging facility.

Hitsatun rakenteen lujuustarkastelu kokeellisesti määritetyn kuormitushistorian perusteella

Työssä tutkittiin jätteen murskauksesta murskaimeen aiheutuvia kuormituksia vastusvenymäliuskamittauksilla. Eri jätetyyppien aiheuttamia kuormituksia tutkittiin erillisinä tapauksina ja näistä tyyppikuormituksista johdettiin rakenteen normaalia käyttöä vastaava kuormitushistoria käyttäen painokertoimia eri tyyppikuormien kesken. Murskaimen runkorakennetta tutkittiin FE-analyysillä käyttäen kuormituksena kenttämittauksilla saatua todellista kuormitusta. FE-menetelmällä tutkittiin väsymisen kannalta kriittisiä kohtia rakenteesta. Tulosten perusteella kriittisiin yksityiskohtiin laadittiin parannusehdotuksia, joiden perusteella yhteistyössä työn teettäjän kanssa laadittiin uudet rakenneratkaisut. Rakenteen kestoikä määritettiin väsymisvaurion kannalta kriittisimmän yksityiskohdan mukaan. Kestoiän määrittämiseen käytettiin Palmgren-Miner menetelmää ja Palmgren-Miner menetelmästä johdettua ekvivalentin jännitysvaihtelun menetelmää. Muutosten jälkeen rakenne täyttää sille asetetun suunnittelukestoiän käytettyjen menetelmien perusteella.

Alternativa productiva para el aprovechamiento del residuo cachaza

Este trabajo de investigación, busca ofrecer al sector panelero de Colombia nuevas estrategias eco-eficientes y amigables con el medio ambiente, en pro de fortalecer las buenas prácticas agrícolas, que contribuyan con la gestión óptima de los residuos que se crean alrededor de la cadena de producción de la panela. Teniendo en cuenta que la obtención de desechos tanto orgánicos como inorgánicos, genera un impacto medioambiental negativo, se pudo identificar una de estas fuentes de contaminación, a través de un proceso de observación. Ésta es conocida como la Cachaza, la cual se genera dentro de un procedimiento denominado Limpieza del Dulce de Caña. Inicialmente, la caña se muele a través de una trituradora que exprime dulce sin tratamiento, el cual pasa por un ducto hasta regarse sobre una primera paila, donde se le aplica balso. Por medio del calor que produce una hornilla sobre la que se coloca dicha paila, se realiza un proceso de separación, el residuo consolidado en una espuma espesa, comienza a flotar por encima del dulce, siendo extraída a medida que va saliendo y depositada en otros recipientes. Considerando constantes prácticas como el vertimiento de la Cachaza sobre algunas fuentes hídricas (ríos, lagunas, etc.) y cultivos de caña ya fermentados (que elaboran nutrientes negativos sobre los mismos); se profundizará sobre los diferentes impactos ambientales que se originan en éste proceso agroindustrial. El objetivo principal del presente trabajo de investigación, consiste en la implementación de un proyecto de logística inversa, formulando estrategias para el procesamiento de la Cachaza a implementar en un trapiche de la zona de Rio negro a fin de reutilizar este residuo generando subproductos que aporten a la mitigación del impacto ambiental, dando así un valor agregado a toda la cadena. Mediante un análisis costo beneficio se evaluará qué tan fácil o difícil resulta la implementación de dicho proyecto, el cual al incluir un proceso adicional a la cadena de producción de la panela generara un suplemento alimenticio para los equinos y aprovechara el 100% de sus residuos a muy bajo costo.

Seston capture by Hydropsyche siltalai and the accuracy of capture efficiency estimates

1. Suspension feeding by caseless caddisfly larvae (Trichoptera) constitutes a major pathway for energy flow, and strongly influences productivity, in streams and rivers. 2. Consideration of the impact of these animals on lotic ecosystems has been strongly influenced by a single study investigating the efficiency of particle capture of nets built by one species of hydropsychid caddisfly. 3. Using water sampling techniques at appropriate spatial scales, and taking greater consideration of local hydrodynamics than previously, we examined the size-frequency distribution of particles captured by the nets of Hydropsyche siltalai. Our results confirm that capture nets are selective in terms of particle size, and in addition suggest that this selectivity is for particles likely to provide the most energy. 4. By incorporating estimates of flow diversion around the nets of caseless caddisfly larvae, we show that capture efficiency (CE) is considerably higher than previously estimated, and conclude that more consideration of local hydrodynamics is needed to evaluate the efficiency of particle capture. 5. We use our results to postulate a mechanistic explanation for a recent example of interspecific facilitation, whereby a reduction of near-bed velocities seen in single species monocultures leads to increased capture rates and local depletion of seston within the region of reduced velocity.