Servomechanisms /

Includes index.

Dynamic Image-based visual servo control using centroid and optic flow features

This paper considers the question of designing a fully image-based visual servo control for a class of dynamic systems. The work is motivated by the ongoing development of image-based visual servo control of small aerial robotic vehicles. The kinematics and dynamics of a rigid-body dynamical system (such as a vehicle airframe) maneuvering over a flat target plane with observable features are expressed in terms of an unnormalized spherical centroid and an optic flow measurement. The image-plane dynamics with respect to force input are dependent on the height of the camera above the target plane. This dependence is compensated by introducing virtual height dynamics and adaptive estimation in the proposed control. A fully nonlinear adaptive control design is provided that ensures asymptotic stability of the closed-loop system for all feasible initial conditions. The choice of control gains is based on an analysis of the asymptotic dynamics of the system. Results from a realistic simulation are presented that demonstrate the performance of the closed-loop system. To the author's knowledge, this paper documents the first time that an image-based visual servo control has been proposed for a dynamic system using vision measurement for both position and velocity.

Experimental evaluation of position control methods for hydraulic systems

Presents a unified and systematic assessment of ten position control strategies for a hydraulic servo system with single-ended cylinder driven by a proportional directional control valve. We aim at identifying those methods that achieve better tracking, have a low sensitivity to system uncertainties, and offer a good balance between development effort and end results. A formal approach for solving this problem relies on several practical metrics, which is introduced herein. Their choice is important, as the comparison results between controllers can vary significantly, depending on the selected criterion. Apart from the quantitative assessment, we also raise aspects which are difficult to quantify, but which must stay in attention when considering the position control problem for this class of hydraulic servo systems.

Robot control of a 3,500 tonne mining machine

The mining industry is highly suitable for the application of robotics and automation technology since the work is arduous, dangerous and often repetitive. This paper describes the development of an automation system for a physically large and complex field robotic system - a 3,500 tonne mining machine (a dragline). The major components of the system are discussed with a particular emphasis on the machine/operator interface. A very important aspect of this system is that it must work cooperatively with a human operator, seamlessly passing the control back and forth in order to achieve the main aim - increased productivity.

Vision-based control for mining automation

The mining industry is highly suitable for the application of robotics and automation technology since the work is both arduous and dangerous. Visual servoing is a means of integrating noncontact visual sensing with machine control to augment or replace operator based control. This article describes two of our current mining automation projects in order to demonstrate some, perhaps unusual, applications of visual servoing, and also to illustrate some very real problems with robust computer vision

Conception mécanique d'un chien robot : GIPO

La conceció de GIPO té com a areferència el gos AIBO, desenvolupat per Sony. L'estudi per a la seva realització comprèn el desenvolupament de la part tecnològica. S'assumeix que la cinemàtica d'AIBO ha estat àmpliament provada i que és òptima.

Steering without Circe : attending to reinforcing loops in social systems

Relating system dynamics to the broad systems movement, the key notion is that reinforcing loops deserve no less attention than balancing loops. Three specific propositions follow. First, since reinforcing loops arise in surprising places, investigations of complex systems must consider their possible existence and potential impact. Second, because the strength of reinforcing loops can be misinferred - we include an example from the field of servomechanisms - computer simulation can be essential. Be it project management, corporate growth or inventory oscillation, simulation helps to assess consequences of reinforcing loops and options for interventions. Third, in social systems the consequences of reinforcing loops are not inevitable. Examples concerning globalization illustrate how difficult it might be to challenge such assumptions. However, system dynamics and ideas from contemporary social theory help to show that even the most complex social systems are, in principle, subject to human influence. In conclusion, by employing these ideas, by attending to reinforcing as well as balancing loops, system dynamics work can improve the understanding of social systems and illuminate our choices when attempting to steer them.

Modelagem de um servomecanismo para acionamento da placa swashplate de uma bomba de pistões axiais de vazão variável

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Sintetizador analógico en Arduino

Este proyecto consiste en el diseño y construcción de un sintetizador basado en el chip 6581 Sound Interface Device (SID). Este chip era el encargado de la generación de sonido en el Commodore 64, ordenador personal comercializado en 1982, y fue el primer sintetizador complejo construido para ordenador. El chip en cuestión es un sintetizador de tres voces, cada una de ellas capaz de generar cuatro diferentes formas de onda. Cada voz tiene control independiente de varios parámetros, permitiendo una relativamente amplia variedad de sonidos y efectos, muy útil para su uso en videojuegos. Además está dotado de un filtro programable para conseguir distintos timbres mediante síntesis sustractiva. El sintetizador se ha construido sobre Arduino, una plataforma de electrónica abierta concebida para la creación de prototipos, consistente en una placa de circuito impreso con un microcontrolador, programable desde un PC para que realice múltiples funciones (desde encender LEDs hasta controlar servomecanismos en robótica, procesado y transmisión de datos, etc.). El sintetizador es controlable vía MIDI, por ejemplo, desde un teclado de piano. A través de MIDI recibe información tal como qué notas debe tocar, o los valores de los parámetros del SID que modifican las propiedades del sonido. Además, toda esa información también la puede recibir de un PC mediante una conexión USB. Se han construido dos versiones del sintetizador: una versión “hardware”, que utiliza el SID para la generación de sonido, y otra “software”, que reemplaza el SID por un emulador, es decir, un programa que se comporta (en la medida de lo posible) de la misma manera que el SID. El emulador se ha implementado en un microcontrolador Atmega 168 de Atmel, el mismo que utiliza Arduino. ABSTRACT. This project consists on design and construction of a synthesizer which is based on chip 6581 Sound Interface Device (SID). This chip was used for sound generation on the Commodore 64, a home computer presented in 1982, and it was the first complex synthesizer built for computers. The chip is a three-voice synthesizer, each voice capable of generating four different waveforms. Each voice has independent control of several parameters, allowing a relatively wide variety of sounds and effects, very useful for its use on videogames. It also includes a programmable filter, allowing more timbre control via subtractive synthesis. The synthesizer has been built on Arduino, an open-source electronics prototyping platform that consists on a printed circuit board with a microcontroller, which is programmable with a computer to do several functions (lighting LEDs, controlling servomechanisms on robotics, data processing or transmission, etc.). The synthesizer is controlled via MIDI, in example, from a piano-type keyboard. It receives from MIDI information such as the notes that should be played or SID’s parameter values that modify the sound. It also can receive that information from a PC via USB connection. Two versions of the synthesizer have been built: a hardware one that uses the SID chip for sound generation, and a software one that replaces SID by an emulator, it is, a program that behaves (as far as possible) in the same way the SID would. The emulator is implemented on an Atmel’s Atmega 168 microcontroller, the same one that is used on Arduino.

New techniques and equipment for correlation and computation

"Technical memorandum 7668-TM-2"

Synchro and Servo fundamentals.

"Navpers 91915[-91916]"

Servomechanism practice /

Includes index.

Servomechanism practice

Mode of access: Internet.

Notes on analog-digital conversion techniques,

Mode of access: Internet.

Technology of instrumentation.

Mode of access: Internet.