Separador de arraste no topo do evaporador

Curso de Tecnologia Sucroalcooleira. Disciplina de Tecnologia de Produção de Açúcar. Ilustração. Dimensão: 1368x707. Tamanho: 78Kb.

Separador de arraste do tipo ás de ouro

Curso de Tecnologia Sucroalcooleira. Disciplina de Tecnologia de Produção de Açúcar. Ilustração. Dimensão: 1100x626. Tamanho: 72Kb.

Separador de arraste do tipo grade

Curso de Tecnologia Sucroalcooleira. Disciplina de Tecnologia de Produção de Açúcar. Ilustração. Dimensão: 1289x491. Tamanho: 54Kb.

Remoção de amônia do lixiviado por arraste de ar e caracterização por fracionamento com membrana.

A proposta deste trabalho é estudar a tecnologia para a remoção de amônia do lixiviado através do processo físico-químico de arraste com ar e a sua caracterização por processos de fracionamento com membranas de MF e UF. Foram analisados no processo de arraste de ar os parâmetros pH, vazão de ar e tempo de operação. Foi verificada a remoção de nitrogênio amoniacal de 93,5% em um tempo de operação de 6 horas, com ajuste de pH igual a 11 e vazão de ar 100 L/h. Após a remoção do nitrogênio amoniacal, os lixiviados foram submetidos a processo de fracionamento com membranas de microfiltração (MF) e ultrafiltração (UF), sendo investigadas a remoção de amônia, a condutividade, DQO, COD, cloreto e pH. Obtiveram-se resultados praticamente constantes à medida que o lixiviado permeou nas membranas de MF e UF. Ademais, empregaram-se testes de toxicidade e ensaios de tratabilidade biológica com amostras de lixiviado bruto, lixiviado tratado (baixa concentração de amônia) e lixiviados fracionados com membranas de MF e UF. Nos ensaios de tratabilidade biológica os resultados mostraram que não houve uma remoção significativa de matéria orgânica e nos testes de toxicidade com organismos Danio rerio, embora tenha ocorrido uma redução na toxicidade na sequência dos experimentos, foi constatado que o lixiviado bruto, lixiviado tratado com remoção de amônia e fracionados com membranas de MF e UF mantiveram elevada toxicidade.

Planejamento de arraste mecanizado em floresta tropical.

Este trabalho visa basicamente sugerir uma sequência de metodológica de trabalho para o planejamento adequado do arraste mecanizado, baseado no proposto em Braz & Oliveira (1996), e métodos existentes.

Desenvolvimento de uma unidade pirolítica com reator de cilindro rotativo: obtenção de bio-óleo

The demand for alternative sources of energy drives the technological development so that many fuels and energy conversion processes before judged as inadequate or even non-viable, are now competing fuels and so-called traditional processes. Thus, biomass plays an important role and is considered one of the sources of renewable energy most important of our planet. Biomass accounts for 29.2% of all renewable energy sources. The share of biomass energy from Brazil in the OIE is 13.6%, well above the world average of participation. Various types of pyrolysis processes have been studied in recent years, highlighting the process of fast pyrolysis of biomass to obtain bio-oil. The continuous fast pyrolysis, the most investigated and improved are the fluidized bed and ablative, but is being studied and developed other types in order to obtain Bio-oil a better quality, higher productivity, lower energy consumption, increased stability and process reliability and lower production cost. The stability of the product bio-oil is fundamental to designing consumer devices such as burners, engines and turbines. This study was motivated to produce Bio-oil, through the conversion of plant biomass or the use of its industrial and agricultural waste, presenting an alternative proposal for thermochemical pyrolysis process, taking advantage of particle dynamics in the rotating bed that favors the right gas-solid contact and heat transfer and mass. The pyrolyser designed to operate in a continuous process, a feeder containing two stages, a divisive system of biomass integrated with a tab of coal fines and a system of condensing steam pyrolytic. The prototype has been tested with sawdust, using a complete experimental design on two levels to investigate the sensitivity of factors: the process temperature, gas flow drag and spin speed compared to the mass yield of bio-oil. The best result was obtained in the condition of 570 oC, 25 Hz and 200 cm3/min, temperature being the parameter of greatest significance. The mass balance of the elementary stages presented in the order of 20% and 37% liquid pyrolytic carbon. We determined the properties of liquid and solid products of pyrolysis as density, viscosity, pH, PCI, and the composition characterized by chemical analysis, revealing the composition and properties of a Bio-oil.

Arraste via fecal de nutrientes da ingestão produzido por bagaço de mandioca hidrolisado

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Um sistema para estimação da vazão de gás de poços produzindo por Plunger Lift para vaso separador de teste em plataformas de petróleo

This work intends to analyze the behavior of the gas flow of plunger lift wells producing to well testing separators in offshore production platforms to aim a technical procedure to estimate the gas flow during the slug production period. The motivation for this work appeared from the expectation of some wells equipped with plunger lift method by PETROBRAS in Ubarana sea field located at Rio Grande do Norte State coast where the produced fluids measurement is made in well testing separators at the platform. The oil artificial lift method called plunger lift is used when the available energy of the reservoir is not high enough to overcome all the necessary load losses to lift the oil from the bottom of the well to the surface continuously. This method consists, basically, in one free piston acting as a mechanical interface between the formation gas and the produced liquids, greatly increasing the well s lifting efficiency. A pneumatic control valve is mounted at the flow line to control the cycles. When this valve opens, the plunger starts to move from the bottom to the surface of the well lifting all the oil and gas that are above it until to reach the well test separator where the fluids are measured. The well test separator is used to measure all the volumes produced by the well during a certain period of time called production test. In most cases, the separators are designed to measure stabilized flow, in other words, reasonably constant flow by the use of level and pressure electronic controllers (PLC) and by assumption of a steady pressure inside the separator. With plunger lift wells the liquid and gas flow at the surface are cyclical and unstable what causes the appearance of slugs inside the separator, mainly in the gas phase, because introduce significant errors in the measurement system (e.g.: overrange error). The flow gas analysis proposed in this work is based on two mathematical models used together: i) a plunger lift well model proposed by Baruzzi [1] with later modifications made by Bolonhini [2] to built a plunger lift simulator; ii) a two-phase separator model (gas + liquid) based from a three-phase separator model (gas + oil + water) proposed by Nunes [3]. Based on the models above and with field data collected from the well test separator of PUB-02 platform (Ubarana sea field) it was possible to demonstrate that the output gas flow of the separator can be estimate, with a reasonable precision, from the control signal of the Pressure Control Valve (PCV). Several models of the System Identification Toolbox from MATLAB® were analyzed to evaluate which one better fit to the data collected from the field. For validation of the models, it was used the AIC criterion, as well as a variant of the cross validation criterion. The ARX model performance was the best one to fit to the data and, this way, we decided to evaluate a recursive algorithm (RARX) also with real time data. The results were quite promising that indicating the viability to estimate the output gas flow rate from a plunger lift well producing to a well test separator, with the built-in information of the control signal to the PCV

Estudo da hidrodinâmica de um novo separador líquido-líquido: aplicação ao sistema óleo-bruto/água produzida

This work aims to use a different hydrodynamic condition applied to a new design of mixer-settler on treating wastewater produced by petroleum industry, called MDIF (Misturador-Decantador à Inversão de Fases/ Mixer-Settler based on Phase Inversion MSPI). The use of this different hydrodynamic behaviour is possible due to vertical disposition of the device and the principle of Phase Inversion that controls the MDIF, providing the generation (creation) of a cascade of drops, into an organic layer, that works as micro-decanters, thus making possible the formation of a bed of non-coalesced drops, called Bed Formation . The use of this new hydrodynamics condition allows to increase the residence time of the oil carrier drops, into an organic layer, and the device can treat a greater volume of wastewater. In view of to get this condition it is necessary to operate at high throughput (58,6 m3.m-2.h-1). By results, the condition of Bed Formation is the best one to be used when MSPI operates with throughput up to 58,6 m3.m-2.h-1. The results using the condition of Bed Formation show that increasing the height of the bed of non-coalesced drops and/or decreasing the volumetric ratio (O/A) an increase of the separation efficiency is detected

Planejamento experimental aplicada a um novo separador líquido-líquido utilizado no tratamento de águas residuais contaminadas com petróleo

The present work had as objective to apply an experimental planning aiming at to improve the efficiency of separation of a new type of mixer-settler applied to treat waste water contaminated with oil. An unity in scale of laboratory, was installed in the Post-graduation Program of Chemical Engineering of UFRN. It was constructed in partnership with Petrobras S.A. This called device Misturador-Decantador a Inversão de Fases (MDIF) , possess features of conventional mixer-settler and spray column type. The equipment is composed of three main parts: mixing chamber; chamber of decantation and chamber of separation. The efficiency of separation is evaluated analyzing the oil concentrations in water in the feed and the output of the device. For the analysis one used the gravimetric method of oil and greases analysis (TOG). The system in study is a water of formation emulsified with oil. The used extractant is a mixture of Turpentine spirit hydro-carbons, supplied for Petrobras. It was applied, for otimization of the efficiency of separation of the equipment, an experimental planning of the composite central type, having as factorial portion fractionary factorial planning 2 5-2, with the magnifying of the type star and five replications in the central point. In this work, the following independents variables were studied: contents of oil in the feed of the device; volumetric ratio (O/A); total flowrate ; agitation in the mixing chamber and height of the organic bed. Minimum and maximum limits for the studied variables had been fixed according previous works. The analysis of variance for the equation of the empirical model, revealed statistically significant and useful results for predictions ends. The variance analysis also presented the distribution of the error as a normal distribution and was observed that as the dispersions do not depend on the levels of the factors, the independence assumption can be verified. The variation around the average is explained by 98.98%, or either, equal to the maximum value, being the smoothing of the model in relation to the experimental points of 0,98981. The results present a strong interaction between the variable oil contents in the feed and agitation in the mixing chamber, having great and positive influence in the separation efficiency. Another variable that presented a great positive influence was the height of the organic bed. The best results of separation efficiency had been obtained for high flowrates when associates the high oil concentrations and high agitation. The results of the present work had shown excellent agreement with the results carried out through previous works with the mixer-settler of phase inversion

Modelagem e simulação de um separador bifásico com inversão de fases induzida

The present work has the main goal to study the modeling and simulation of a biphasic separator with induced phase inversion, the MDIF, with the utilization of the finite differences method for the resolution of the partial differencial equations which describe the transport of contaminant s mass fraction inside the equipment s settling chamber. With this aim, was developed the deterministic differential model AMADDA, wich was admensionalizated and then semidiscretizated with the method of lines. The integration of the resultant system of ordinary differential equations was realized by means of a modified algorithm of the Adam-Bashfort- Moulton method, and the sthocastic optimization routine of Basin-Hopping was used in the model s parameter estimation procedure . With the aim to establish a comparative referential for the results obtained with the model AMADDA, were used experimental data presented in previous works of the MDIF s research group. The experimental data and those obtained with the model was assessed regarding its normality by means of the Shapiro-Wilk s test, and validated against the experimental results with the Student s t test and the Kruskal-Wallis s test, depending on the result. The results showed satisfactory performance of the model AMADDA in the evaluation of the MDIF s separation efficiency, being possible to determinate that at 1% significance level the calculated results are equivalent to those determinated experimentally in the reference works

Método da histerese por auto-ajuste para minimização de esforço de controle no separador submarino VASPS

Neste trabalho apresenta-se o estudo do desenvolvimento de um controlador não-tradicional baseado em um mecanismo de histerese com auto-ajuste para o controle de nível de líquido de um sistema de separação e bombeio submarino conhecido como VASPS. O controlador desenvolvido gera sinais enviados para a bomba centrífuga submersa para controlar o nível de líquido no tanque do separador, evitando que ele atinja valores muito baixos que poderiam danificar a bomba ou valores muito altos que reduziriam a eficiência da separação líquido/gás. Os sinais de controle gerados pelo controlador visam solicitar a bomba o mínimo possível de modo a evitar o seu desgaste e falhas prematuras. Nas simulações, o controlador desenvolvido foi testado sob grandes variações nas condições de operação, tais como golfadas, produzindo resultados bastante satisfatórios e promissores.

Compactação de um cambissolo háplico com o tráfego de um trator skidder no arraste de pinus elliottii

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Otimização do processo de extração do óleo essencial de priprioca (Cyperus articulatus L.) por arraste com vapor

Analisa-se experimentalmente o processo de extração do óleo essencial de rizomas de priprioca (Cyperus articulatus L.) por arraste com vapor d’água saturado, em um protótipo em escala de bancada. Por meio de experimentos estatisticamente planejados, estimam-se as condições ótimas o processo de modo a maximizar as variáveis de resposta rendimento em óleo e teor de mustacona, componente majoritário do óleo essencial de priprioca, em função de variáveis operacionais de entrada do processo. As variáveis independentes e respectivos níveis são: carga de rizomas de priprioca, em gramas (64, 200, 400, 600, 736); granulometria dos rizomas, em milímetros (0,61; 1,015; 1,6; 2,19; 2,58) e tempo de extração, em minutos (40, 60, 90, 120, 140). Utilizando um planejamento composto central, com auxílio do aplicativo Statistica® 7.0, são propostos modelos matemáticos para as respostas em função das variáveis independentes isoladas e de suas combinações. Constata-se que o rendimento em óleo essencial e os teores de mustacona podem ser estimados adequadamente por modelos polinomiais de segunda ordem. São obtidos simultaneamente maiores rendimentos em óleo e teores de mustacona, quando a carga de rizomas varia de 105 a 400 gramas para tempos de extração compreendidos entre 105 e 140 minutos.