Calculation of Reliability Characteristics for Regenerative Models

If a regenerative process is represented as semi-regenerative, we derive formulae enabling us to calculate basic characteristics associated with the first occurrence time starting from corresponding characteristics for the semi-regenerative process. Recursive equations, integral equations, and Monte-Carlo algorithms are proposed for practical solving of the problem.

Weak strangeness changing semi-leptonic process

We have obtained total and differential cross sections for the strangeness changing charged current weak reaction ν L + p → Λ(Σ0) + L+ using standard dipole form factors, where L stands for an electron, muon, or tau lepton, and L + stands for an positron, anti-muon or anti-tau lepton. We calculated these reactions from near threshold few hundred MeV to 8 GeV of incoming neutrino energy and obtained the contributions of the various form factors to the total and differential cross sections. We did this in support of possible experiments which might be carried out by the MINERνA collaboration at Fermilab. The calculation is phenomenologically based and makes use of SU(3) relations to obtain the standard vector current form factors and data from Λ beta decay to obtain the axial current form factor. We also made estimates for the contributions of the pseudoscalar form factor and for the F E and FS form factors to the total and differential cross sections. We discuss our results and consider under what circumstances we might extract the various form factors. In particular we wish to test the SU(3) assumptions made in determining all the form factors over a range of q2 values. Recently new form factors were obtained from recoil proton measurements in electron-proton electromagnetic scattering at Jefferson Lab. We thus calculated the contributions of the individual form factors to the total and differential cross sections for this new set of form factors. We found that the differential and total cross sections for Λ production change only slightly between the two sets of form factors but that the differential and total cross sections change substantially for Σ 0 production. We discuss the possibility of distinguishing between the two cases for the experiments planned by the MINERνA Collaboration. We also undertook the calculation for the inverse reaction e − + p → Λ + νe for a polarized outgoing Λ which might be performed at Jefferson Lab, and provided additional analysis of the contributions of the individual form factors to the differential cross sections for this case. ^

Maintenance optimisation of a multi-state series-parallel system considering economic dependence and state-dependent inspection intervals

This paper presents a maintenance optimisation method for a multi-state series-parallel system considering economic dependence and state-dependent inspection intervals. The objective function considered in the paper is the average revenue per unit time calculated based on the semi-regenerative theory and the universal generating function (UGF). A new algorithm using the stochastic ordering is also developed in this paper to reduce the search space of maintenance strategies and to enhance the efficiency of optimisation algorithms. A numerical simulation is presented in the study to evaluate the efficiency of the proposed maintenance strategy and optimisation algorithms. The simulation result reveals that maintenance strategies with opportunistic maintenance and state-dependent inspection intervals are more cost-effective when the influence of economic dependence and inspection cost is significant. The study further demonstrates that the optimisation algorithm proposed in this paper has higher computational efficiency than the commonly employed heuristic algorithms.

Risk Minimizing Option Pricing in a Semi-Markov Modulated Market

We address risk minimizing option pricing in a semi-Markov modulated market where the floating interest rate depends on a finite state semi-Markov process. The growth rate and the volatility of the stock also depend on the semi-Markov process. Using the Föllmer–Schweizer decomposition we find the locally risk minimizing price for European options and the corresponding hedging strategy. We develop suitable numerical methods for computing option prices.

A New Class of Processes for Formalizing and Generalizing Individual-Based Models: The Semi-Semi-Markov Processes

2000 Mathematics Subject Classification: 60K15, 60K20, 60G20,60J75, 60J80, 60J85, 60-08, 90B15.

Human Fetal Progenitor Tenocytes for Regenerative Medicine.

Tendon injuries are very frequent and affect a wide and heterogeneous population. Unfortunately, the healing process is long with outcomes that are not often satisfactory due to fibrotic tissue appearance, which leads to scar and adhesion development. Tissue engineering and cell therapies emerge as interesting alternatives to classical treatments. In this study, we evaluated human fetal progenitor tenocytes (hFPTs) as a potential cell source for treatment of tendon afflictions, as fetal cells are known to promote healing in a scarless regenerative process. hFPTs presented a rapid and stable growth up to passage 9, allowing to create a large cell bank for off-the-shelf availability. hFPTs showed a strong tenogenic phenotype with an excellent stability, even when placed in conditions normally inducing cells to differentiate. The karyotype also indicated a good stability up to passage 12, which is far beyond that necessary for clinical application (passage 6). When placed in coculture, hFPTs had the capacity to stimulate human adult tenocytes (hATs), which are responsible for the deposition of a new extracellular matrix during tendon healing. Finally, it was possible to distribute cells in porous or gel scaffolds with an excellent survival, thus permitting a large variety of applications (from simple injections to grafts acting as filling material). All of these results are encouraging in the development of an off-the-shelf cell source capable of stimulating tendon regeneration for the treatment of tendon injuries.

An approach for extending Building Information Models (BIM) to specifications

The Construction industry accounts for a tenth of global GDP. Still, challenges such as slow adoption of new work processes, islands of information, and legal disputes, remain frequent, industry-wide occurrences despite various attempts to address them. In response, IT-based approaches have been adopted to explore collaborative ways of executing construction projects. Building Information Modelling (BIM) is an exemplar of integrative technologies whose 3D-visualisation capabilities have fostered collaboration especially between clients and design teams. Yet, the ways in which specification documents are created and used in capturing clients' expectations based on industry standards have remained largely unchanged since the 18th century. As a result, specification-related errors are still common place in an industry where vast amounts of information are consumed as well as produced in the course project implementation in the built environment. By implication, processes such as cost planning which depend on specification-related information remain largely inaccurate even with the use of BIM-based technologies. This paper briefly distinguishes between non-BIM-based and BIM-based specifications and reports on-going efforts geared towards the latter. We review exemplars aimed at extending Building Information Models to specification information embedded within the objects in a product library and explore a viable way of reasoning about a semi-automated process of specification using our product library.

Text mining for screening efficiency? Testing within a Cochrane public health review

Background The requirement for dual screening of titles and abstracts to select papers to examine in full text can create a huge workload, not least when the topic is complex and a broad search strategy is required, resulting in a large number of results. An automated system to reduce this burden, while still assuring high accuracy, has the potential to provide huge efficiency savings within the review process. Objectives To undertake a direct comparison of manual screening with a semi‐automated process (priority screening) using a machine classifier. The research is being carried out as part of the current update of a population‐level public health review. Methods Authors have hand selected studies for the review update, in duplicate, using the standard Cochrane Handbook methodology. A retrospective analysis, simulating a quasi‐‘active learning’ process (whereby a classifier is repeatedly trained based on ‘manually’ labelled data) will be completed, using different starting parameters. Tests will be carried out to see how far different training sets, and the size of the training set, affect the classification performance; i.e. what percentage of papers would need to be manually screened to locate 100% of those papers included as a result of the traditional manual method. Results From a search retrieval set of 9555 papers, authors excluded 9494 papers at title/abstract and 52 at full text, leaving 9 papers for inclusion in the review update. The ability of the machine classifier to reduce the percentage of papers that need to be manually screened to identify all the included studies, under different training conditions, will be reported. Conclusions The findings of this study will be presented along with an estimate of any efficiency gains for the author team if the screening process can be semi‐automated using text mining methodology, along with a discussion of the implications for text mining in screening papers within complex health reviews.

Aggregate download throughput for TCP-controlled long file transfers in a WLAN with multiple STA-AP association rates

We consider several WLAN stations associated at rates r(1), r(2), ... r(k) with an Access Point. Each station (STA) is downloading a long file from a local server, located on the LAN to which the Access Point (AP) is attached, using TCP. We assume that a TCP ACK will be produced after the reception of d packets at an STA. We model these simultaneous TCP-controlled transfers using a semi-Markov process. Our analytical approach leads to a procedure to compute aggregate download, as well as per-STA throughputs, numerically, and the results match simulations very well. (C) 2012 Elsevier B.V. All rights reserved.

Cultura de tecidos desdiferenciados e embriões somáticos de Petiveria alliacea L. visando à produção de substâncias bioativas

Petiveria alliacea L. pertence à família Phytolaccacceae e é conhecida popularmente como guiné ou amansa-senhor, entre outros nomes. Tem sido muito utilizada na medicina popular como agente terapêutico, devido à diversas propriedades farmacológicas. Estudos fitoquímicos têm contribuído para a descoberta de grande variedade de substâncias biologicamente ativas produzidas em diferentes partes da planta (saponinas, alcalóides, flavonóides, sulfetos, taninos, cumarinas, entre outros). A análise química da raiz tem revelado grande quantidade de derivados sulfurados, principalmente o dibenzil trissulfeto (DTS), com atividade antifúngica, antibacteriana, antioxidante e anticancerígena. Visando avaliar a produção biotecnológica do DTS, o presente trabalho teve como objetivo, otimizar a cultura de novas linhagens de calos, células em suspensão e embriões somáticos, a partir de plantas de P. alliacea L. mantidas in vitro, com o monitoramento da capacidade biossintética das culturas. Os resultados mostraram que a produção de calos friáveis foi possível em explantes foliares inoculados em meio MS suplementado com PIC ou 2,4-D. Além da resposta calogênica, foi observada a produção de estruturas globulares caracterizadas como embriões somáticos. A ocorrência de embriogênese somática direta foi confirmada através da análise histológica do processo regenerativo. A indução de embriões somáticos gerou um processo de embriogênese secundária altamente repetitivo até 150 dias de cultura e conversão a plantas em freqüência de 5%. Em relação à cultura de células em suspensão a partir dos calos friáveis, observou-se uma diminuição do crescimento celular ao longo das subculturas. As culturas em suspensão originadas de tecido embriogênico secundário continuaram o processo repetitivo em meio líquido e apresentaram conversão a plantas em taxas mais baixas que as obtidas em meio sólido. A obtenção de plantas completas a partir dos embriões somáticos demonstrou a possibilidade de utilização desse sistema para a micropropagação dessa espécie. O monitoramento fitoquímico dos sistemas de cultura in vitro e plantas de campo mantidas em casa de vegetação durante 02 anos apresentou diferenças significativas, confirmando que a cultura de tecidos pode alterar as rotas metabólicas. A cromatografia gasosa acoplada à espectrometria de massas realizada com extrato em diclorometano de embriões secos e hexânico de embriões frescos e raízes secas de plantas provenientes de embriões somáticos, demonstrou a presença do DTS, constituindo, portanto, sistemas in vitro importantes para a modulação desta substância.

Estudo DFT para a interação das moléculas de CO e NO com perovskitas de LaFePdO3 dopadas com Mn, Co e Ni

Recentemente, vem sendo desenvolvido o uso de catalisadores de metais preciosos suportados por óxidos do tipo perovskita em automóveis. Tais sistemas catalíticos são conhecidos como catalisadores Inteligentes. A tecnologia dos catalisadores inteligentes aponta para um novo futuro na catálise automotiva e surge como um promissor substituinte para os catalisadores convencionais. O entendimento dos principais fatores que levam a auto regeneração destes catalisadores é um passo fundamental no processo de evolução desta tecnologia. O mecanismo de auto regeneração é responsável diretamente pelo aumento considerável do tempo de vida útil destes catalisadores perante aos convencionais. Consequentemente, o seu custo é bem mais baixo comparado ao convencional. Outro fator relevante é a durabilidade estrutural e o grande número de possibilidade de combinações possíveis das perovskita que fazem delas excelentes estruturas para estudo. O objetivo do trabalho é entender o processo auto regenerativo do catalisador automotivo a base de perovskita dopadas com um átomo de cobalto, manganês e níquel e quando expostas a um ambiente com uma molécula de NO e CO , através da análise da interação desses átomos dopantes em relação a estrutura da perovskita e como se comportará o átomo de paládio ao entrar em contato com a molécula de NO e CO

Using GPS, GIS & remote sensing to understand Niagara Terroir : Pinot noir in the Four Mile Creek & St. David's Bench sub-appellations

The relationships between vine water status, soil texture, and vine size were observed in four Niagara, Ontario Pinot noir vineyards in 2008 and 2009. The vineyards were divided into water status zones using geographic information systems (GIS) software to map the seasonal mean midday leaf water potential (,P), and dormant pruning shoot weights following the 2008 season. Fruit was harvested from all sentinel vines, bulked by water status zones and made into wine. Sensory analysis included a multidimensional sorting (MDS) task and descriptive analysis (DA) of the 2008 wines. Airborne multispectral images, with a spatial resolution of 38 cm, were captured four times in 2008 and three times in 2009, with the final flights around veraison. A semi-automatic process was developed to extract NDVI from the images, and a masking procedure was identified to create a vine-only NDVI image. 2008 and 2009 were cooler and wetter than mean years, and the range of water status zones was narrow. Yield per vine, vine size, anthocyanins and phenols were the least consistent variables. Divided by water status or vine size, there were no variables with differences between zones in all four vineyards in either year. Wines were not different between water status zones in any chemical analysis, and HPLC revealed that there were no differences in individual anthocyanins or phenolic compounds between water status zones within the vineyard sites. There were some notable correlations between vineyard and grape composition variables, and spatial trends were observed to be qualitatively related for many of the variables. The MDS task revealed that wines from each vineyard were more affected by random fermentation effects than water status effects. This was confirmed by the DA; there were no differences between wines from the water status zones within vineyard sites for any attribute. Remotely sensed NDVI (normalized difference vegetation index) correlated reasonably well with a number of grape composition variables, as well as soil type. Resampling to a lower spatial resolution did not appreciably affect the strength of correlations, and corresponded to the information contained in the masked images, while maintaining the range of values of NDVI. This study showed that in cool climates, there is the potential for using precision viticulture techniques to understand the variability in vineyards, but the variable weather presents a challenge for understanding the driving forces of that variability.

Elucidation of the Retinoid Signalling Pathway Involved in Axon Guidance in Lymnaea stagnalis and Xenopus laevis

The vitamin A metabolite, retinoic acid (RA), is known to play a crucial role in several developmental processes including axial patterning and differentiation. More recently, RA has been implicated in the regenerative process acting through its classical signaling pathway, the nuclear receptors, retinoic acid receptor (RAR) and retinoid X receptor (RXR), to mediate gene transcription. Moreover, RA has been shown to act as a guidance molecule for growth cones of regenerating motorneurons of the pond snail, Lymnaea stagnalis. Our lab has recently shown that RA can induce this morphological response independent of nuclear transcription, however, the role of the retinoid receptors in RA-induced chemoattraction is still unknown. Here, I show that the retinoid receptors, RXR and RAR, may mediate the growth cones response to the metabolically active retinoic acid isomers, all-trans and 9-cis RA, in Lymnaea stagnalis. Data presented here show that both an RXR and RAR antagonist can block growth cone turning in response to application of both isomers. Because no prior investigations have shown growth cone turning of individual vertebrate neurons, I aimed to show that both retinoic acid isomers were capable of inducing growth cone turning of embryonic spinal cord neurons in the frog, Xenopus laevis. For the first time in Xenopus, I showed that both all-trans and 9-cis RA were able to induce significantly more neurite outgrowth from cultured embryonic spinal cord neurons and induce positive growth cone turning of individual growth cones. In addition, I showed that the presence of the RXR antagonist, HX531, blocked 9-cis RA-induced growth cone turning and the RARβ antagonist, LE135, blocked all-trans RA-induced growth cone turning in this species. Evidence provided here shows for the first time, conservation of retinoic acid-induced growth cone turning in a vertebrate model system. In addition, these data show that the receptors involved in this morphological response may be the same in vertebrates and invertebrates.

Innover en politique : les acteurs internationaux, régionaux et nationaux en stratégies de développement économique en Afrique

Pourquoi, comment et quand y a-t-il changement institutionnel et politique en Afrique ? En examinant les stratégies de développement économique de l’Afrique postcoloniale et en s’intéressant à l’évolution du rôle de l’État – État comme acteur central du développement, tentative du retrait de l’État, interventionnisme limité au social, retour de l’État dans la sphère économique –, la présente thèse se propose d’expliquer le changement sous l’angle original des innovations politiques et institutionnelles. En effet, derrière l’apparente continuité que la plupart des auteurs tant analytiques que normatifs fustigent, il se produit des innovations dont nous proposons de rendre compte par le biais des variables idéationnelles, stratégiques, temporelles et institutionnelles. Cette thèse propose ainsi une analyse comparative inédite du rôle des acteurs nationaux (élites, États, administrations publiques du Bénin, Burkina Faso, Cameroun, Côte d’Ivoire, Congo, Sénégal, Mali, Niger, Togo), des institutions internationales (FMI, Banque mondiale, ONU) et des organisations d’intégration régionale (Union africaine, NEPAD) dans l’émergence et les trajectoires des stratégies de développement en Afrique. Les contextes temporels favorables, les crises des modèles précédents, les configurations et héritages institutionnels structurants, les stratégies instrumentales des acteurs intéressés, l’apprentissage politique, les dimensions cognitives et normatives des idées permettent d’expliquer la diffusion, la sédimentation et la conversion institutionnelles comme processus privilégiés d’innovation en Afrique. La critique de ces concepts permet de développer des outils mieux adaptés pour expliquer certaines innovations, soit l’inclusion et l’intrusion institutionnelles. L’inclusion institutionnelle est un processus mi-stratégique et mi-idéationnel à travers lequel les acteurs nationaux ou régionaux incluent intentionnellement des stratégies (ou solutions) internationales déjà existantes dans une nouvelle institution ou politique dans le but d’accroître la probabilité d’acceptation (reconnaissance, convenance sociale, partage réel ou supposé des mêmes valeurs) ou de succès (pour faire valoir les intérêts) de cette dernière dans un environnement politique structuré. Les idées sont constitutives des intérêts dans ce processus. L’intrusion institutionnelle renvoie à un processus mi-stratégique et mi-structurel par lequel les acteurs nationaux se font relativement imposer de nouvelles institutions ou politiques qu’ils n’acceptent qu’en raison de l’asymétrie de pouvoir, de la contrainte structurelle (structure), ou des gains escomptés (stratégies) des acteurs internationaux, alors que des solutions de rechange pertinentes et non contraignantes sont quasi inexistantes. Ceci n’exclut pas l’existence d’une marge de manœuvre des acteurs nationaux. Inspirés de spécialistes comme Nicolas van de Walle, Kathleen Thelen, Robert Bates, Barry Weingast, Alexander Wendt, Peter Hall, Theda Skocpol et Paul Pierson, ces concepts d’intrusion et d’inclusion institutionnelles que nous proposons réconcilient des approches parfois jugées contradictoires en intégrant les dimensions stratégiques, institutionnelles, historiques et idéationnelles à l’analyse d’un même objet scientifique. Au niveau empirique, la présente thèse permet d’avoir une meilleure compréhension des processus d’émergence des stratégies de développement économique en Afrique, ainsi qu’une meilleure connaissance des relations entre les acteurs internationaux, régionaux et nationaux en ce qui concerne l’émergence et le développement des institutions et des politiques publiques relatives au développement. Une attention particulière est accordée à la dynamique entre différents acteurs et variables (idées, intérêts, institution, temps) pour expliquer les principales stratégies des trois dernières décennies : les stratégies nationales de développement du Bénin, Burkina Faso, Cameroun, Côte d’Ivoire, Congo, Sénégal, Mali, Niger, Togo, le Plan d’action de Lagos, les programmes d’ajustement structurel, le Nouveau Partenariat pour le Développement de l’Afrique, les Documents de stratégie pour la réduction de la pauvreté et certaines interventions du Fonds monétaire international, de Banque mondiale et de l’ONU. En s’intéressant à la question de l’innovation délaissée à tort par la plupart des analyses sérieuses, la présente thèse renouvelle la discussion sur le changement et l’innovation politiques et institutionnels en Afrique et en science politique.

Muscular weakness in the mdx mouse.

mdx mice are believed to be virtually free from neuromuscular symptoms, despite the presence of a degenerative/regenerative process that involves all skeletal muscles. We analyzed both the spontaneous motility and treadmill motor activity of mdx mice aged 15 days to 6 months. Our results indicate that there is an early period, between the end of the second and up to the fifth week of life, when mdx mice experience extreme weakness. After this critical period, both spontaneous motility and endurance of mdx mice, although lower than those of controls, do not show statistically significant differences up to 6 months of age. We also carried out a detailed histological analysis of proximal and distal muscle groups in mdx mice during this early critical motility period. The occurrence of extensive necrosis followed by regeneration and involving proximal muscles before distal ones was documented in mice as young as 16-17 days of age and reached a peak at day 18. We conclude that dystrophin deficiency induces muscle degeneration and significant weakness in mdx mice, but only in an early period. Later on, during development, mdx mice adapt to the lack of this protein and do not show detectable in vivo functional muscle impairment up to 6 months of age.