an analysis for understanding software security requirement methodologies

IEEE Reliabil Soc, Shanghai Jiao Tong Univ

Organisational security requirements : an agile approach to ubiquitous information security

This paper proposes to address the need for more innovation in organisational information security by adding a security requirement engineering focus. Based on the belief that any heavyweight security requirements process in organisational security will be doomed to fail, we developed a security requirement approach with three dimensions. The use of a simple security requirements process in the first dimension has been augmented by an agile security approach. However, introducing this second dimension of agile security does provide support for, but does not necessarily stimulate, innovation. A third dimension is, therefore, needed to ensure there is a proper focus in the organisation's efforts to identify potential new innovations in their security. To create this focus three common shortcomings in organisational information security have been identified. The resulting security approach that addresses these shortcomings is called Ubiquitous Information Security. This paper will demonstrate the potential of this new approach by briefly discussing its possible application in two areas: Ubiquitous Identity Management and Ubiquitous Wireless Security.

Usability and Security in Medication Administration Applications

The traditional process of filling the medicine trays and dispensing the medicines to the patients in the hospitals is manually done by reading the printed paper medicine chart. This process can be very strenuous and error-prone, given the number of sub-tasks involved in the entire workflow and the dynamic nature of the work environment. Therefore, efforts are being made to digitalise the medication dispensation process by introducing a mobile application called Smart Dosing application. The introduction of the Smart Dosing application into hospital workflow raises security concerns and calls for security requirement analysis. This thesis is written as a part of the smart medication management project at Embedded Systems Laboratory, A° bo Akademi University. The project aims at digitising the medicine dispensation process by integrating information from various health systems, and making them available through the Smart Dosing application. This application is intended to be used on a tablet computer which will be incorporated on the medicine tray. The smart medication management system include the medicine tray, the tablet device, and the medicine cups with the cup holders. Introducing the Smart Dosing application should not interfere with the existing process carried out by the nurses, and it should result in minimum modifications to the tray design and the workflow. The re-designing of the tray would include integrating the device running the application into the tray in a manner that the users find it convenient and make less errors while using it. The main objective of this thesis is to enhance the security of the hospital medicine dispensation process by ensuring the security of the Smart Dosing application at various levels. The methods used for writing this thesis was to analyse how the tray design, and the application user interface design can help prevent errors and what secure technology choices have to be made before starting the development of the next prototype of the Smart Dosing application. The thesis first understands the context of the use of the application, the end-users and their needs, and the errors made in everyday medication dispensation workflow by continuous discussions with the nursing researchers. The thesis then gains insight to the vulnerabilities, threats and risks of using mobile application in hospital medication dispensation process. The resulting list of security requirements was made by analysing the previously built prototype of the Smart Dosing application, continuous interactive discussions with the nursing researchers, and an exhaustive stateof- the-art study on security risks of using mobile applications in hospital context. The thesis also uses Octave Allegro method to make the readers understand the likelihood and impact of threats, and what steps should be taken to prevent or fix them. The security requirements obtained, as a result, are a starting point for the developers of the next iteration of the prototype for the Smart Dosing application.

Usability and Security in Medication. Administration Applications

The traditional process of filling the medicine trays and dispensing the medicines to the patients in the hospitals is manually done by reading the printed paper medicinechart. This process can be very strenuous and error-prone, given the number of sub-tasksinvolved in the entire workflow and the dynamic nature of the work environment.Therefore, efforts are being made to digitalise the medication dispensation process byintroducing a mobile application called Smart Dosing application. The introduction ofthe Smart Dosing application into hospital workflow raises security concerns and callsfor security requirement analysis. This thesis is written as a part of the smart medication management project at EmbeddedSystems Laboratory, A˚bo Akademi University. The project aims at digitising the medicine dispensation process by integrating information from various health systems, and making them available through the Smart Dosing application. This application is intended to be used on a tablet computer which will be incorporated on the medicine tray. The smart medication management system include the medicine tray, the tablet device, and the medicine cups with the cup holders. Introducing the Smart Dosing application should not interfere with the existing process carried out by the nurses, and it should result in minimum modifications to the tray design and the workflow. The re-designing of the tray would include integrating the device running the application into the tray in a manner that the users find it convenient and make less errors while using it. The main objective of this thesis is to enhance the security of the hospital medicine dispensation process by ensuring the security of the Smart Dosing application at various levels. The methods used for writing this thesis was to analyse how the tray design, and the application user interface design can help prevent errors and what secure technology choices have to be made before starting the development of the next prototype of the Smart Dosing application. The thesis first understands the context of the use of the application, the end-users and their needs, and the errors made in everyday medication dispensation workflow by continuous discussions with the nursing researchers. The thesis then gains insight to the vulnerabilities, threats and risks of using mobile application in hospital medication dispensation process. The resulting list of security requirements was made by analysing the previously built prototype of the Smart Dosing application, continuous interactive discussions with the nursing researchers, and an exhaustive state-of-the-art study on security risks of using mobile applications in hospital context. The thesis also uses Octave Allegro method to make the readers understand the likelihood and impact of threats, and what steps should be taken to prevent or fix them. The security requirements obtained, as a result, are a starting point for the developers of the next iteration of the prototype for the Smart Dosing application.

Privacy-aware workflow management

Information security policies play an important role in achieving information security. Confidentiality, Integrity, and Availability are classic information security goals attained by enforcing appropriate security policies. Workflow Management Systems (WfMSs) also benefit from inclusion of these policies to maintain the security of business-critical data. However, in typical WfMSs these policies are designed to enforce the organisation’s security requirements but do not consider those of other stakeholders. Privacy is an important security requirement that concerns the subject of data held by an organisation. WfMSs often process sensitive data about individuals and institutions who demand that their data is properly protected, but WfMSs fail to recognise and enforce privacy policies. In this paper, we illustrate existing WfMS privacy weaknesses and introduce WfMS extensions required to enforce data privacy. We have implemented these extensions in the YAWL system and present a case scenario to demonstrate how it can enforce a subject’s privacy policy.

Common secure index for conjunctive keyword-based retrieval over encrypted data

We consider the following problem: users in a dynamic group store their encrypted documents on an untrusted server, and wish to retrieve documents containing some keywords without any loss of data confidentiality. In this paper, we investigate common secure indices which can make multi-users in a dynamic group to obtain securely the encrypted documents shared among the group members without re-encrypting them. We give a formal definition of common secure index for conjunctive keyword-based retrieval over encrypted data (CSI-CKR), define the security requirement for CSI-CKR, and construct a CSI-CKR based on dynamic accumulators, Paillier’s cryptosystem and blind signatures. The security of proposed scheme is proved under strong RSA and co-DDH assumptions.

Cryptographic hash functions

Cryptographic hash functions are an important tool of cryptography and play a fundamental role in efficient and secure information processing. A hash function processes an arbitrary finite length input message to a fixed length output referred to as the hash value. As a security requirement, a hash value should not serve as an image for two distinct input messages and it should be difficult to find the input message from a given hash value. Secure hash functions serve data integrity, non-repudiation and authenticity of the source in conjunction with the digital signature schemes. Keyed hash functions, also called message authentication codes (MACs) serve data integrity and data origin authentication in the secret key setting. The building blocks of hash functions can be designed using block ciphers, modular arithmetic or from scratch. The design principles of the popular Merkle–Damgård construction are followed in almost all widely used standard hash functions such as MD5 and SHA-1.

OPTIMALITY OF THE PRODUCT-MATRIX CONSTRUCTION FOR SECURE MSR REGENERATING CODES

In this paper, we consider the security of exact-repair regenerating codes operating at the minimum-storage-regenerating (MSR) point. The security requirement (introduced in Shah et. al.) is that no information about the stored data file must be leaked in the presence of an eavesdropper who has access to the contents of l(1) nodes as well as all the repair traffic entering a second disjoint set of l(2) nodes. We derive an upper bound on the size of a data file that can be securely stored that holds whenever l(2) <= d - k +1. This upper bound proves the optimality of the product-matrix-based construction of secure MSR regenerating codes by Shah et. al.

PUF-based secure checker protocol for Networked RFID Systems

Radio Frequency Identification (RFID) system is anemerging technology for automating object identification. TheNetworked RFID System (NRS) is a component of a distributedobject identification network which facilitates automated supplychain management. It also makes the Internet of Things (IoT)concept a reality. To increase the business feasibility of NRSimplementation, the system should be able to ensure the visibilityand traceability of the object throughout the chain using achecker protocol. By doing so, the protocol will check thegenuineness of the object and the genuineness of the object’sprevious travel path on-site. While doing so, the protocol needs toensure the security requirement of the system. To this end, wepropose a secure checker protocol for NRS which will use a PUF(Physically Unclonable Function) and simple cryptographicprimitives. The protocol provides security (protect privacy of thepartners, injection of fake objects, non-repudiation, andunclonability), visibility and traceability for NRS. It is alsosuitable for passive tags.

Enterprise information security policy assessment : an extended framework for metrics development utilising the goal-question-metric approach

Effective enterprise information security policy management requires review and assessment activities to ensure information security policies are aligned with business goals and objectives. As security policy management involves the elements of policy development process and the security policy as output, the context for security policy assessment requires goal-based metrics for these two elements. However, the current security management assessment methods only provide checklist types of assessment that are predefined by industry best practices and do not allow for developing specific goal-based metrics. Utilizing theories drawn from literature, this paper proposes the Enterprise Information Security Policy Assessment approach that expands on the Goal-Question-Metric (GQM) approach. The proposed assessment approach is then applied in a case scenario example to illustrate a practical application. It is shown that the proposed framework addresses the requirement for developing assessment metrics and allows for the concurrent undertaking of process-based and product-based assessment. Recommendations for further research activities include the conduct of empirical research to validate the propositions and the practical application of the proposed assessment approach in case studies to provide opportunities to introduce further enhancements to the approach.

The enterprise information security policy as a strategic business policy within the corporate strategic plan (extended abstract)

Information security has been recognized as a core requirement for corporate governance that is expected to facilitate not only the management of risks, but also as a corporate enabler that supports and contributes to the sustainability of organizational operations. In implementing information security, the enterprise information security policy is the set of principles and strategies that guide the course of action for the security activities and may be represented as a brief statement that defines program goals and sets information security and risk requirements. The enterprise information security policy (alternatively referred to as security policy in this paper) that represents the meta-policy of information security is an element of corporate ICT governance and is derived from the strategic requirements for risk management and corporate governance. Consistent alignment between the security policy and the other corporate business policies and strategies has to be maintained if information security is to be implemented according to evolving business objectives. This alignment may be facilitated by managing security policy alongside other corporate business policies within the strategic management cycle. There are however limitations in current approaches for developing and managing the security policy to facilitate consistent strategic alignment. This paper proposes a conceptual framework for security policy management by presenting propositions to positively affect security policy alignment with business policies and prescribing a security policy management approach that expounds on the propositions.

Security constrained economic dispatch considering wind energy conversion systems

The available wind power is stochastic and requires appropriate tools in the OPF model for economic and reliable power system operation. This paper exhibit the OPF formulation with factors involved in the intermittency of wind power. Weibull distribution is adopted to find the stochastic wind speed and power distribution. The reserve requirement is evaluated based on the wind distribution and risk of under/over estimation of the wind power. In addition, the Wind Energy Conversion System (WECS) is represented by Doubly Fed Induction Generator (DFIG) based wind farms. The reactive power capability for DFIG based wind farm is also analyzed. The study is performed on IEEE-30 bus system with wind farm located at different buses and with different wind profiles. Also the reactive power capacity to be installed in the wind farm to maintain a satisfactory voltage profile under the various wind flow scenario is demonstrated.

Novel information sharing syntax for data sharing between police and community partners, using role-based security.

The exchange of information between the police and community partners forms a central aspect of effective community service provision. In the context of policing, a robust and timely communications mechanism is required between police agencies and community partner domains, including: Primary healthcare (such as a Family Physician or a General Practitioner); Secondary healthcare (such as hospitals); Social Services; Education; and Fire and Rescue services. Investigations into high-profile cases such as the Victoria Climbié murder in 2000, the murders of Holly Wells and Jessica Chapman in 2002, and, more recently, the death of baby Peter Connelly through child abuse in 2007, highlight the requirement for a robust information-sharing framework. This paper presents a novel syntax that supports information-sharing requests, within strict data-sharing policy definitions. Such requests may form the basis for any information-sharing agreement that can exist between the police and their community partners. It defines a role-based architecture, with partner domains, with a syntax for the effective and efficient information sharing, using SPoC (Single Point-of-Contact) agents to control in-formation exchange. The application of policy definitions using rules within these SPoCs is inspired by network firewall rules and thus define information exchange permissions. These rules can be imple-mented by software filtering agents that act as information gateways between partner domains. Roles are exposed from each domain to give the rights to exchange information as defined within the policy definition. This work involves collaboration with the Scottish Police, as part of the Scottish Institute for Policing Research (SIPR), and aims to improve the safety of individuals by reducing risks to the community using enhanced information-sharing mechanisms.

Exploiting Direct Links for Physical Layer Security in Multi-User Multi-Relay Networks

We present two physical layer secure transmission schemes for multi-user multi-relay networks, where the communication from M users to the base station is assisted by direct links and by N decode-and-forward relays. In this network, we consider that a passive eavesdropper exists to overhear the transmitted information, which entails exploiting the advantages of both direct and relay links for physical layer security enhancement. To fulfill this requirement, we investigate two criteria for user and relay selection and examine the achievable secrecy performance. Criterion I performs a joint user and relay selection, while Criterion II performs separate user and relay selections, with a lower implementation complexity. We derive a tight lower bound on the secrecy outage probability for Criterion I and an accurate analytical expression for the secrecy outage probability for Criterion II. We further derive the asymptotic secrecy outage probabilities at high transmit signal-to-noise ratios and high main-to-eavesdropper ratios for both criteria. We demonstrate that the secrecy diversity order is min (MN, M + N) for Criterion I, and N for Criterion II. Finally, we present numerical and simulation results to validate the proposed analysis, and show the occurrence condition of the secrecy outage probability floor

The Article 51 reporting requirement for self-defense actions

This article examines one legal criterion for the exercise of the right of self-defense that has been significantly overlooked by commentators: the so-called “reporting requirement.” Article 51 of the United Nations (UN) Charter provides, inter alia, that “[m]easures taken by members in the exercise of this right of self-defense shall be immediately reported to the Security Council.” Although the requirement to report all self-defense actions to the Council is clearly set out in Article 51, the Charter offers no further guidance with regard to this obligation. Reference to the practice of states since the UN’s inception in 1945 is therefore essential to understanding the scope and nature of the reporting requirement. As such, this article is underpinned by an extensive original dataset of reporting practice covering the period from January 1, 1998 to December 31, 2013. We know from Article 51 that states “shall” report, but do they, and—if so—in what manner? What are the various implications of reporting, of failing to report, and of the way in which states report? How are reports used, and by whom? Most importantly, this article questions the ultimate value of states reporting their self-defense actions to the Security Council in modern interstate relations.