The risk of divorce and household saving behavior

We analyze the impact of an increase in the risk of divorce on the savingbehaviour of married couples. From a theoretical perspective, the expected sign of theeffect is ambiguous. We take advantage of the legalization of divorce in Ireland in 1996as an exogenous increase in the likelihood of marital dissolution. We analyze the savingbehaviour over time of couples who were married before the law was passed. We proposea difference-in-differences approach where we use as comparison groups either marriedcouples in other European countries (not affected by the law change), or Irish familieswho did not experience a significant increase in the expected risk of divorce (such as veryreligious families, or single individuals). Our results suggest that the increase in the riskof divorce brought about by the law was followed by an increase in the propensity to saveof married couples, consistent with a rise in precautionary savings interpretation. Anincrease in the risk of marital dissolution of about 40 percent led to a 7 to 13 percent risein the proportion of married couples reporting positive savings.

Economic experiments used for the evaluation of building users’ energy-saving behavior

Different treatments that could be implemented in the home environ-ment are evaluated with the objective of reaching a more rational and efficient use of energy. We consider that a detailed knowledge of energy-consuming behaviour is paramount for the development and implementation of new technologies, services and even policies that could result in more rational energy use. The proposed evaluation methodology is based on the development of economic experiments implemented in an experimental economics laboratory, where the behaviour of individuals when making decisions related to energy use in the domestic environment can be tested.

The retirement outlook for Chile's independently employed workers: a case study of attitudes and saving behavior

Includes bibliography

Diz-me porque poupas, dir-te-ei como te comportas

Embora Portugal seja um país onde tradicionalmente se mantinham elevados níveis de poupança, essa tendência esbateu-se na década passada, fruto de fatores diversos e de uma realidade sócio-económica menos favorável. Todavia, na presente conjuntura económica reveste-se de particular importância a adoção de comportamentos de poupança. É, por isso, necessário compreender claramente os fatores que estão na sua origem. Neste estudo, que envolveu uma amostra de 835 portugueses, procurámos investigar a relação entre as motivações de poupança e os comportamentos de poupança dos portugueses. Os resultados indicam que as motivações de poupança estão relacionadas com a perceção da capacidade de gestão financeira, com a elaboração de um orçamento familiar e com a frequência de poupança dos agregados familiares em Portugal.

A simple model of multiple equilibria based on risk

This paper shows how risk may aggravate fluctuations in economies with imperfect insurance and multiple assets. A two period job matching model is studied, in which risk averse agents act both as workers and as entrepreneurs. They choose between two types of investment: one type is riskless, while the other is a risky activity that creates jobs.Equilibrium is unique under full insurance. If investment is fully insured but unemployment risk is uninsured, then precautionary saving behavior dampens output fluctuations. However, if both investment and employment are uninsured, then an increase in unemployment gives agents an incentive to shift investment away from the risky asset, further increasing unemployment. This positive feedback may lead to multiple Pareto ranked equilibria. An overlapping generations version of the model may exhibit poverty traps or persistent multiplicity. Greater insurance is doubly beneficial in this context since it can both prevent multiplicity and promote risky investment.

The role of guarantees in pension plan design: Pension saving decisions

This study centers on the assessment of psychological value of guarantees in pension products and the behavior biases associated with choice. When a guarantee on a product increases from 99% to 99,5% less than half of respondents show willingness to pay in contrast with 73% when going from 99,5% to 100%. Out of 105 respondents, 55 show that their choices concerning pension products are inconsistent with classic utility theory. Financial background proves insignificant thus pointing to behavioral biases. As individuals make choices that leave them worse-off, we argue that pension plan design would highly benefit from public policy interventions.

The impact of past hyperinflation on current household investment behavior

Neste estudo é proposto que a instabilidade macroeconômica extrema causada pela hiperinflação nas décadas de 80 e 90 no Brasil causou um efeito de longo prazo no comportamento de poupança dos indivíduos. Usando dados da Pesquisa Nacional por Amostra de Domicílio (PNAD) de 2009 e 2011 e um questionário complementar, encontramos três evidências significantes: (1) indivíduos que possuem memória do período de hiperinflação no Brasil tem uma menor probabilidade de participar do mercado de ações; (2) há uma forte evidência que pessoas que estavam em idade formativa durante a hiperinflação são menos dispostos de possuir algum tipo de instrumento financeiro do que pessoas que tiveram a experiência desse choque macroeconômico em outros períodos de suas vidas; (3) mulheres solteiras são muito mais prováveis de ter uma poupança financeira que homens solteiros.

Mechanical behavior of natural fiber composites

The use of natural fibers as reinforcement in polymeric composites for technical applications has been a research subject of scientists during the last decade. There is a great interest in the application of sisal fiber as substitutes for glass fibers, motivated by potential advantages of weight saving, lower raw material price, and ecological advantages of using green resources which are renewable and biodegradable.Castor oil, a triglyceride vegetable that has hydroxyl groups, was reacted with 4,4' diphenylmethane diisocyanate (MDI) to produce the polyurethane matrix. Woven sisal fibers were used untreated and thermal treated at 60 C for 72h, and the composites were processed by compression molding.The present work study tensile behavior at four composites: dry sisal/polyurethane, humid sisal/polyurethane, dry sisal/phenolic and humid sisal/phenolic resin. The moisture content influences of sisal fibers on the mechanical behaviors were analyzed.Experimental results showed a higher tensile strength for the sisal/phenolic composites followed by sisal/polyurethane, respectively. In this research, sisal composites were also characterized by scanning electron microscopy. (C) 2011 Published by Elsevier Ltd. Selection and/or peer-review under responsibility of ICM11

Continuum models of the mechanical behavior of rolled and die-cast magnesium alloys

En los últimos años ha habido una fuerte tendencia a disminuir las emisiones de CO2 y su negativo impacto medioambiental. En la industria del transporte, reducir el peso de los vehículos aparece como la mejor opción para alcanzar este objetivo. Las aleaciones de Mg constituyen un material con gran potencial para el ahorro de peso. Durante la última década se han realizado muchos esfuerzos encaminados a entender los mecanismos de deformación que gobiernan la plasticidad de estos materiales y así, las aleaciones de Mg de colada inyectadas a alta presión y forjadas son todavía objeto de intensas campañas de investigación. Es ahora necesario desarrollar modelos que contemplen la complejidad inherente de los procesos de deformación de éstos. Esta tesis doctoral constituye un intento de entender mejor la relación entre la microestructura y el comportamiento mecánico de aleaciones de Mg, y dará como resultado modelos de policristales capaces de predecir propiedades macro- y microscópicas. La deformación plástica de las aleaciones de Mg está gobernada por una combinación de mecanismos de deformación característicos de la estructura cristalina hexagonal, que incluye el deslizamiento cristalográfico en planos basales, prismáticos y piramidales, así como el maclado. Las aleaciones de Mg de forja presentan texturas fuertes y por tanto los mecanismos de deformación activos dependen de la orientación de la carga aplicada. En este trabajo se ha desarrollado un modelo de plasticidad cristalina por elementos finitos con el objetivo de entender el comportamiento macro- y micromecánico de la aleación de Mg laminada AZ31 (Mg-3wt.%Al-1wt.%Zn). Este modelo, que incorpora el maclado y tiene en cuenta el endurecimiento por deformación debido a las interacciones dislocación-dislocación, dislocación-macla y macla-macla, predice exitosamente las actividades de los distintos mecanismos de deformación y la evolución de la textura con la deformación. Además, se ha llevado a cabo un estudio que combina difracción de electrones retrodispersados en tres dimensiones y modelización para investigar el efecto de los límites de grano en la propagación del maclado en el mismo material. Ambos, experimentos y simulaciones, confirman que el ángulo de desorientación tiene una influencia decisiva en la propagación del maclado. Se ha observado que los efectos no-Schmid, esto es, eventos de deformación plástica que no cumplen la ley de Schmid con respecto a la carga aplicada, no tienen lugar en la vecindad de los límites de baja desorientación y se hacen más frecuentes a medida que la desorientación aumenta. Esta investigación también prueba que la morfología de las maclas está altamente influenciada por su factor de Schmid. Es conocido que los procesos de colada suelen dar lugar a la formación de microestructuras con una microporosidad elevada, lo cuál afecta negativamente a sus propiedades mecánicas. La aplicación de presión hidrostática después de la colada puede reducir la porosidad y mejorar las propiedades aunque es poco conocido su efecto en el tamaño y morfología de los poros. En este trabajo se ha utilizado un enfoque mixto experimentalcomputacional, basado en tomografía de rayos X, análisis de imagen y análisis por elementos finitos, para la determinación de la distribución tridimensional (3D) de la porosidad y de la evolución de ésta con la presión hidrostática en la aleación de Mg AZ91 (Mg- 9wt.%Al-1wt.%Zn) colada por inyección a alta presión. La distribución real de los poros en 3D obtenida por tomografía se utilizó como input para las simulaciones por elementos finitos. Los resultados revelan que la aplicación de presión tiene una influencia significativa tanto en el cambio de volumen como en el cambio de forma de los poros que han sido cuantificados con precisión. Se ha observado que la reducción del tamaño de éstos está íntimamente ligada con su volumen inicial. En conclusión, el modelo de plasticidad cristalina propuesto en este trabajo describe con éxito los mecanismos intrínsecos de la deformación de las aleaciones de Mg a escalas meso- y microscópica. Más especificamente, es capaz de capturar las activadades del deslizamiento cristalográfico y maclado, sus interacciones, así como los efectos en la porosidad derivados de los procesos de colada. ---ABSTRACT--- The last few years have seen a growing effort to reduce CO2 emissions and their negative environmental impact. In the transport industry more specifically, vehicle weight reduction appears as the most straightforward option to achieve this objective. To this end, Mg alloys constitute a significant weight saving material alternative. Many efforts have been devoted over the last decade to understand the main mechanisms governing the plasticity of these materials and, despite being already widely used, high pressure die-casting and wrought Mg alloys are still the subject of intense research campaigns. Developing models that can contemplate the complexity inherent to the deformation of Mg alloys is now timely. This PhD thesis constitutes an attempt to better understand the relationship between the microstructure and the mechanical behavior of Mg alloys, as it will result in the design of polycrystalline models that successfully predict macro- and microscopic properties. Plastic deformation of Mg alloys is driven by a combination of deformation mechanisms specific to their hexagonal crystal structure, namely, basal, prismatic and pyramidal dislocation slip as well as twinning. Wrought Mg alloys present strong textures and thus specific deformation mechanisms are preferentially activated depending on the orientation of the applied load. In this work a crystal plasticity finite element model has been developed in order to understand the macro- and micromechanical behavior of a rolled Mg AZ31 alloy (Mg-3wt.%Al-1wt.%Zn). The model includes twinning and accounts for slip-slip, slip-twin and twin-twin hardening interactions. Upon calibration and validation against experiments, the model successfully predicts the activity of the various deformation mechanisms and the evolution of the texture at different deformation stages. Furthermore, a combined three-dimensional electron backscatter diffraction and modeling approach has been adopted to investigate the effect of grain boundaries on twin propagation in the same material. Both experiments and simulations confirm that the misorientation angle has a critical influence on twin propagation. Non-Schmid effects, i.e. plastic deformation events that do not comply with the Schmid law with respect to the applied stress, are absent in the vicinity of low misorientation boundaries and become more abundant as misorientation angle increases. This research also proves that twin morphology is highly influenced by the Schmid factor. Finally, casting processes usually lead to the formation of significant amounts of gas and shrinkage microporosity, which adversely affect the mechanical properties. The application of hydrostatic pressure after casting can reduce the porosity and improve the properties but little is known about the effects on the casting’s pores size and morphology. In this work, an experimental-computational approach based on X-ray computed tomography, image analysis and finite element analysis is utilized for the determination of the 3D porosity distribution and its evolution with hydrostatic pressure in a high pressure diecast Mg AZ91 alloy (Mg-9wt.%Al-1wt.%Zn). The real 3D pore distribution obtained by tomography is used as input for the finite element simulations using an isotropic hardening law. The model is calibrated and validated against experimental stress-strain curves. The results reveal that the pressure treatment has a significant influence both on the volume and shape changes of individuals pores, which have been precisely quantified, and which are found to be related to the initial pore volume. In conclusion, the crystal plasticity model proposed in this work successfully describes the intrinsic deformation mechanisms of Mg alloys both at the mesoscale and the microscale. More specifically, it can capture slip and twin activities, their interactions, as well as the potential porosity effects arising from casting processes.

Consumer behavior of individual families over two & three years.

Mode of access: Internet.

Disentangle contextual and permanent individual motivations:an application to shopping behavior

Past studies resulted in conflicting definitions of consumer motivation. On the one hand, motivations are seen as the consumer’s characteristics that shape her general behavior (motivational trait). On the other hand, they are seen as contextual variables representing the reason why the individual is behaving specific to today’s context (motivational state). The objective of this research is to stress the difference between these two concepts and to understand the impact of each on consumer behavior. We applied our empirical study to shopping motivations; our results show a strong interaction between motivational trait and motivational state. Problem and Hypothesis On the one hand, Westbrook and Black (1985) consider shopping motivations as individual permanent characteristics. This concept is shared by other researchers (Rohm and Swaminathan 2004), which show that some shoppers are functional (they shop for convenience, information seeking, and time saving) while some others are hedonic (they shop for social interaction, bargain hunting and browsing). On the other hand, Kaltcheva and Weitz (2006) define motivations as a contextual orientation changing over time, depending on the situation, and show that contextual shopping motivations have a strong impact on shopping behavior. From our knowledge, no research specifically examined the respective impact of both these shopping motivation types. To deal with this issue, we used the notions of “traits” and “states” that have been largely used in marketing research to designate respectively a permanent characteristic of the individual and a temporary orientation of the consumer (Mowen 2000). The reversal theory (Apter 2001) suggests that two opposite states exist: the telic and the paratelic states. In the telic state, individuals set goals for themselves, must be disciplined to reach these goals, and do not behave in accordance with their personal trait. In the paratelic state, individuals are seeking arousal and enjoyment, do not set rules, and one could postulate that they act in accordance with their natural tendencies. Based on these considerations, we hypothesize the following process: in situations involving paratelic states, hedonic as well as functional individuals should behave according to their natural traits, whereas in situations involving telic states, hedonic people should inhibit their natural propensity to enjoy shopping and behave similarly to functional people. Hence, we postulate the following: Hypothesis: Compared to shoppers with functional motivational trait, shoppers with hedonic motivational trait will a) significantly display more hedonic shopping behavior intentions in a condition of paratelic motivational state, and b) not display more hedonic shopping behavior intentions in a condition a telic motivational state Empirical Research First, 108 participants were asked to fill a multi-items scale about their shopping habits, which actually measured their shopping motivational traits. This questionnaire allowed us to highlight four different dimensions in shopping motivational traits: social interaction, novelty/utility seeking, bargain hunting, and browsing. According to their scores on different items, participants were classified as functional or as hedonic on each of these four dimensions (a single individual may be hedonic on some dimensions and functional on others). Then, participants were then induced to adopt either a telic or a paratelic shopping motivational state while reading an appropriate scenario. Finally, participants were asked for their shopping behavior intentions in response to the shopping context. Four items were developed, corresponding to the four shopping motivational trait dimensions we found with our factor analysis. Results As we found four dimensions in shopping motivational trait, we set up four quasi-experimental designs to capture the entire phenomenon: for each dimension, a 2 (motivational trait) x 2 (motivational state) design was built, where the dependant variable was the shopping behavior element corresponding to the studied dimension. Four 2 x 2 Anovas were performed to assess the interaction between motivational trait and motivational state. Concerning the three dimensions - browsing, novelty/utility seeking, and bargain hunting- , in the paratelic state scenario participants with hedonic motivational trait displayed significantly more hedonic shopping behavior intentions than participants with a functional motivational trait (resp. F = 9.701, p = .003; F = 4.979, p = .03; F = 5.757, p = .02); and in the telic state scenario, there was no significant difference in behavior intentions between participants with hedonic or functional motivation trait. Each time, the interaction effect between motivational state and motivational trait was significant (resp. F = 4.859, p = .03; F = 3.314, p = .07; F = 2.98, p = .08). Concerning the fourth dimension, social interaction, shopping behavior intentions of participants with hedonic and with functional motivational traits were significantly different in the paratelic state scenario (F = 29.898, p <.000) as well as in the telic state scenario (F = 9.559, p = .003). However, the interaction effect showed that this behavioral difference was significantly stronger in the paratelic scenario. All these results support our research hypothesis. Discussion and Implications Our study provides consistent support for our hypotheses saying that there is an interaction effect between shopping motivational states and shopping motivational traits. The generalization of the results is strengthened by the study of four different shopping traits: social interaction, novelty/utility seeking, bargain hunting and browsing. As we proposed, when shopping in a goal-oriented state (telic state), behaviors of hedonic and functional shoppers do not differ significantly. Conversely, when shopping for a recreational reason (paratelic state), hedonic and functional shoppers behave significantly different. These results could explain why some previous studies concluded that shopping motivational traits had no impact on shopping behavior: they did not take into consideration the interaction between motivational trait and motivational state. Moreover, our study shows that marketing surveys performed by store managers to draw the personal profile of their customers must be crossed with contextual motivations in order to accurately forecast shopper behavior. Future Developments Our results can be explained by the self-control process, which pushes hedonic-trait shoppers to behave in a rather functional way in utilitarian situations. However, to be certain that this is the very process that occurs, we plan to add self-control perception scales to our existing measures. This is obviously the next step of this research.

Governing the water conservation in the Urmia Lake Basin: addressing macro systems’ fit and micro users’ behavior

To change unadapted water governing systems, and water users’ traditional conducts in line with climate change, understanding of systems’ structures and users’ behaviors is necessary. To this aim, comprehensive and pragmatic research was designed and implemented in the Urmia Lake Basin where due to the severe droughts, and human-made influences, especially through the agricultural development, the lake has been shrunken drastically. To analyze the water governance and conservation issues in the basin, an innovative framework was developed based on mathematical physics concepts and pro-environmental behavior theories. Accordingly, in system level (macro/meso), the problem of fit of the early-shaped water governing system associating with the function of “political-security” and “political-economic” factors in the basin was identified through mean-field models. Furthermore, the effect of a “political-environmental” factor, the Urmia Lake Restoration Program (ULRP), on reforming the system structure and hence its fit was assessed. The analysis results revealed that by revising the provincial boundaries (horizontal alternation) for the entity of Kurdistan province to permit that interact with the headquarter of West Azerbaijan province for its water demand-supply initiatives, the system fit can increase. Also, the constitution of the ULRP (vertical arrangement) not only could increase the structural fit of the water governing system to the basin, but also significantly could enhance the system fit through its water-saving policy. Besides, in individual level (micro), the governing factors of water conservation behavior of the major users/farmers were identified through rational and moral socio-psychological models. In rational approach, incorporating PMT and TPB, the SEM results demonstrated that “Perceived Vulnerability”, “Self-Efficacy”, “Response Efficacy”, “Response Cost”, “Subjective Norms” and “Institutional Trust” significantly affect the water-saving intention/behavior. Likewise, NAM based analysis as a moral approach, uncovered the significant effects of “Awareness of Consequences”, “Appraisal of Responsibility”, “Personal Norms” as well as “Place Attachment” and “Emotions” on water-saving intention.

Discovery Of A Rare Pterosaur Bone Bed In A Cretaceous Desert With Insights On Ontogeny And Behavior Of Flying Reptiles.

A pterosaur bone bed with at least 47 individuals (wing spans: 0.65-2.35 m) of a new species is reported from southern Brazil from an interdunal lake deposit of a Cretaceous desert, shedding new light on several biological aspects of those flying reptiles. The material represents a new pterosaur, Caiuajara dobruskii gen. et sp. nov., that is the southermost occurrence of the edentulous clade Tapejaridae (Tapejarinae, Pterodactyloidea) recovered so far. Caiuajara dobruskii differs from all other members of this clade in several cranial features, including the presence of a ventral sagittal bony expansion projected inside the nasoantorbital fenestra, which is formed by the premaxillae; and features of the lower jaw, like a marked rounded depression in the occlusal concavity of the dentary. Ontogenetic variation of Caiuajara dobruskii is mainly reflected in the size and inclination of the premaxillary crest, changing from small and inclined (∼ 115°) in juveniles to large and steep (∼ 90°) in adults. No particular ontogenetic features are observed in postcranial elements. The available information suggests that this species was gregarious, living in colonies, and most likely precocial, being able to fly at a very young age, which might have been a general trend for at least derived pterosaurs.

Bile And Liver Metallothionein Behavior In Copper-exposed Fish.

The present study analyzed metallothionein (MT) excretion from liver to bile in Nile Tilapia (Oreochromis niloticus) exposed to sub-lethal copper concentrations (2mgL(-1)) in a laboratory setting. MTs in liver and bile were quantified by spectrophotometry after thermal incubation and MT metal-binding profiles were characterized by size exclusion high performance liquid chromatography coupled to ICP-MS (SEC-HPLC-ICP-MS). Results show that liver MT is present in approximately 250-fold higher concentrations than bile MT in non-exposed fish. Differences between the MT profiles from the control and exposed group were observed for both matrices, indicating differential metal-binding behavior when comparing liver and bile MT. This is novel data regarding intra-organ MT comparisons, since differences between organs are usually present only with regard to quantification, not metal-binding behavior. Bile MT showed statistically significant differences between the control and exposed group, while the same did not occur with liver MT. This indicates that MTs synthesized in the liver accumulate more slowly than MTs excreted from liver to bile, since the same fish presented significantly higher MT levels in liver when compared to bile. We postulate that bile, although excreted in the intestine and partially reabsorbed by the same returning to the liver, may also release MT-bound metals more rapidly and efficiently, which may indicate an efficient detoxification route. Thus, we propose that the analysis of bile MTs to observe recent metal exposure may be more adequate than the analysis of liver MTs, since organism responses to metals are more quickly observed in bile, although further studies are necessary.