海藻酸钙固定混合SRB菌群生物吸附Ni^2＋的动力学

利用海藻酸钙为载体包埋固定化硫酸盐还原菌（SRB）混合菌群，研究了固定化微生物吸附重金属镍离子的动力学特性．结果表明：固定化混合SRB菌群对Ni^2＋具有良好的吸附性能，最大吸附容量qm高达931．9mg（Ni^2＋）／g（SRB）颗粒，是一种颇具应用前景的生物吸附剂．固定化SRB吸附Ni^2＋的动力学过程可以用准二次动力学方程描述，整个吸附过程可以明显地分为两个阶段，即物理化学吸附阶段和生物沉淀阶段．扩散动力学研究表明，固定化颗粒的内扩散并非是唯一控制吸附速率的机制，整个吸附过程涉及到多种吸附机制．

Isotopic signature of specific biomarkers derived from anaerobic methanotrophic archaea (ANME groups) and sulphate-reducing bacteria (SRB) at different cold seep provinces

Anaerobic methane-oxidizing microbial communities in sediments at cold methane seeps are important factors in controlling methane emission to the ocean and atmosphere. Here, we investigated the distribution and carbon isotopic signature of specific biomarkers derived from anaerobic methanotrophic archaea (ANME groups) and sulphate-reducing bacteria (SRB) responsible for the anaerobic oxidation of methane (AOM) at different cold seep provinces of Hydrate Ridge, Cascadia margin. The special focus was on their relation to in situ cell abundances and methane turnover. In general, maxima in biomarker abundances and minima in carbon isotope signatures correlated with maxima in AOM and sulphate reduction as well as with consortium biomass. We found ANME-2a/DSS aggregates associated with high abundances of sn-2,3-di-O-isoprenoidal glycerol ethers (archaeol, sn-2-hydroxyarchaeol) and specific bacterial fatty acids (C16:1omega5c, cyC17:0omega5,6) as well as with high methane fluxes (Beggiatoa site). The low to medium flux site (Calyptogena field) was dominated by ANME-2c/DSS aggregates and contained less of both compound classes but more of AOM-related glycerol dialkyl glycerol tetraethers (GDGTs). ANME-1 archaea dominated deeper sediment horizons at the Calyptogena field where sn-1,2-di-O-alkyl glycerol ethers (DAGEs), archaeol, methyl-branched fatty acids (ai-C15:0, i-C16:0, ai-C17:0), and diagnostic GDGTs were prevailing. AOM-specific bacterial and archaeal biomarkers in these sediment strata generally revealed very similar d13C-values of around -100 per mill. In ANME-2-dominated sediment sections, archaeal biomarkers were even more 13C-depleted (down to -120 per mill), whereas bacterial biomarkers were found to be likewise 13C-depleted as in ANME-1-dominated sediment layers (d13C: -100 per mill). The zero flux site (Acharax field), containing only a few numbers of ANME-2/DSS aggregates, however, provided no specific biomarker pattern. Deeper sediment sections (below 20 cm sediment depth) from Beggiatoa covered areas which included solid layers of methane gas hydrates contained ANME-2/DSS typical biomarkers showing subsurface peaks combined with negative shifts in carbon isotopic compositions. The maxima were detected just above the hydrate layers, indicating that methane stored in the hydrates may be available for the microbial community. The observed variations in biomarker abundances and 13C-depletions are indicative of multiple environmental and physiological factors selecting for different AOM consortia (ANME-2a/DSS, ANME-2c/DSS, ANME-1) along horizontal and vertical gradients of cold seep settings.

Herramientas innovadoras en el diagnóstico del síndrome respiratorio bovino (SRB)

A pesar de todos los avances realizados en las últimas décadas en el conocimiento sobre numerosos aspectos del Síndrome Respiratorio Bovino (SRB), entre los que se encuentran los factores de riesgo, la etiopatogenia, las características de los agentes causales, el diagnóstico, la terapéutica o la profilaxis y sus efectos globales, el SRB continúa siendo la enfermedad de mayor impacto económico en el ganado vacuno de cebo. Además, parece que tanto su incidencia como las pérdidas que origina siguen estables en los cebaderos de todo el mundo desde hace varias décadas. Sus principales características indican que debemos considerar que es una enfermedad de difícil control dado su carácter multifactorial y con la que, por tanto, debemos acostumbrarnos a convivir aunque aspirando a minimizar tanto su incidencia, como la gravedad de sus consecuencias. Por otro lado, aunque existen muchas técnicas diagnósticas a nuestra disposición, aún no se puede decir que exista una técnica de referencia o “gold standard” para el diagnóstico del SRB, y mucho menos una técnica estandarizada para su diagnóstico precoz. Establecer y estandarizar protocolos para la detección de grupos de animales en riesgo y su monitorización más intensa en fases posteriores del cebo para reducir el consumo de antibióticos de uso preventivo o metafiláctico es de gran interés. Hasta ahora, este tipo de estrategias se han basado en la detección de evidencias de contacto con gérmenes patógenos pulmonares (principalmente análisis de serología). Sin embargo, no debemos olvidar que la identificación de un agente patógeno en ausencia de una lesión y/o signos clínicos atribuibles al mismo, tan sólo es indicativa de contacto previo (no de padecimiento de un proceso de enfermedad) y que, por otro lado, la mayoría de los agentes microbiológicos ligados al SRB son comensales habituales de las vías respiratorias altas. De modo que la identificación de un agente sólo prueba enfermedad si se diagnostica junto con los signos clínicos compatibles de enfermedad y la lesión...

SRB-X : shuttle derived launch vehicle.

Chiefly illustrations.

La gouvernance métropolitaine du transport collectif dans la région montréalaise : le cas du SRB Pie-IX

Montréal parle de disposer d’un service rapide par bus depuis une dizaine années. En 2015, les travaux pour réaliser le premier tronçon du projet appelé le SRB Pie-IX commencent à peine. Comment justifier des délais de réalisation de plusieurs années alors que d’autres villes y arrivent en moins de 3 ans? Plusieurs élus et organismes de Montréal dénoncent une problématique de gouvernance du transport collectif. Seulement, il n’est pas évident de saisir la signification de ce concept si souvent invoqué pour justifier, entre autres, les difficultés de la métropole à faire naître des projets métropolitains de transport collectif. Certains évoquent la responsabilité du gouvernement, d’autres avancent la mauvaise répartition des rôles et responsabilités ou encore déplorent le trop grand nombre d’intervenants dans la région métropolitaine. La gouvernance est un concept à la fois flou et complexe qui cherche à établir la bonne conduite des affaires publiques comme celle de la gestion métropolitaine du transport collectif. Cependant, le système de transport collectif fait intervenir une multitude de parties prenantes aux intérêts contradictoires. La « bonne gouvernance » serait d’établir une collaboration fructueuse qui dépasse les limites institutionnalisées des intervenants pour réaliser des projets d’envergure métropolitaine, comme le SRB Pie-IX.

La gouvernance métropolitaine du transport collectif dans la région montréalaise : le cas du SRB Pie-IX

Montréal parle de disposer d’un service rapide par bus depuis une dizaine années. En 2015, les travaux pour réaliser le premier tronçon du projet appelé le SRB Pie-IX commencent à peine. Comment justifier des délais de réalisation de plusieurs années alors que d’autres villes y arrivent en moins de 3 ans? Plusieurs élus et organismes de Montréal dénoncent une problématique de gouvernance du transport collectif. Seulement, il n’est pas évident de saisir la signification de ce concept si souvent invoqué pour justifier, entre autres, les difficultés de la métropole à faire naître des projets métropolitains de transport collectif. Certains évoquent la responsabilité du gouvernement, d’autres avancent la mauvaise répartition des rôles et responsabilités ou encore déplorent le trop grand nombre d’intervenants dans la région métropolitaine. La gouvernance est un concept à la fois flou et complexe qui cherche à établir la bonne conduite des affaires publiques comme celle de la gestion métropolitaine du transport collectif. Cependant, le système de transport collectif fait intervenir une multitude de parties prenantes aux intérêts contradictoires. La « bonne gouvernance » serait d’établir une collaboration fructueuse qui dépasse les limites institutionnalisées des intervenants pour réaliser des projets d’envergure métropolitaine, comme le SRB Pie-IX.

Synthesis and modifications of metal oxide nanostructures and their applications

Transition metal oxides are functional materials that have advanced applications in many areas, because of their diverse properties (optical, electrical, magnetic, etc.), hardness, thermal stability and chemical resistance. Novel applications of the nanostructures of these oxides are attracting significant interest as new synthesis methods are developed and new structures are reported. Hydrothermal synthesis is an effective process to prepare various delicate structures of metal oxides on the scales from a few to tens of nanometres, specifically, the highly dispersed intermediate structures which are hardly obtained through pyro-synthesis. In this thesis, a range of new metal oxide (stable and metastable titanate, niobate) nanostructures, namely nanotubes and nanofibres, were synthesised via a hydrothermal process. Further structure modifications were conducted and potential applications in catalysis, photocatalysis, adsorption and construction of ceramic membrane were studied. The morphology evolution during the hydrothermal reaction between Nb2O5 particles and concentrated NaOH was monitored. The study demonstrates that by optimising the reaction parameters (temperature, amount of reactants), one can obtain a variety of nanostructured solids, from intermediate phases niobate bars and fibres to the stable phase cubes. Trititanate (Na2Ti3O7) nanofibres and nanotubes were obtained by the hydrothermal reaction between TiO2 powders or a titanium compound (e.g. TiOSO4·xH2O) and concentrated NaOH solution by controlling the reaction temperature and NaOH concentration. The trititanate possesses a layered structure, and the Na ions that exist between the negative charged titanate layers are exchangeable with other metal ions or H+ ions. The ion-exchange has crucial influence on the phase transition of the exchanged products. The exchange of the sodium ions in the titanate with H+ ions yields protonated titanate (H-titanate) and subsequent phase transformation of the H-titanate enable various TiO2 structures with retained morphology. H-titanate, either nanofibres or tubes, can be converted to pure TiO2(B), pure anatase, mixed TiO2(B) and anatase phases by controlled calcination and by a two-step process of acid-treatment and subsequent calcination. While the controlled calcination of the sodium titanate yield new titanate structures (metastable titanate with formula Na1.5H0.5Ti3O7, with retained fibril morphology) that can be used for removal of radioactive ions and heavy metal ions from water. The structures and morphologies of the metal oxides were characterised by advanced techniques. Titania nanofibres of mixed anatase and TiO2(B) phases, pure anatase and pure TiO2(B) were obtained by calcining H-titanate nanofibres at different temperatures between 300 and 700 °C. The fibril morphology was retained after calcination, which is suitable for transmission electron microscopy (TEM) analysis. It has been found by TEM analysis that in mixed-phase structure the interfaces between anatase and TiO2(B) phases are not random contacts between the engaged crystals of the two phases, but form from the well matched lattice planes of the two phases. For instance, (101) planes in anatase and (101) planes of TiO2(B) are similar in d spaces (~0.18 nm), and they join together to form a stable interface. The interfaces between the two phases act as an one-way valve that permit the transfer of photogenerated charge from anatase to TiO2(B). This reduces the recombination of photogenerated electrons and holes in anatase, enhancing the activity for photocatalytic oxidation. Therefore, the mixed-phase nanofibres exhibited higher photocatalytic activity for degradation of sulforhodamine B (SRB) dye under ultraviolet (UV) light than the nanofibres of either pure phase alone, or the mechanical mixtures (which have no interfaces) of the two pure phase nanofibres with a similar phase composition. This verifies the theory that the difference between the conduction band edges of the two phases may result in charge transfer from one phase to the other, which results in effectively the photogenerated charge separation and thus facilitates the redox reaction involving these charges. Such an interface structure facilitates charge transfer crossing the interfaces. The knowledge acquired in this study is important not only for design of efficient TiO2 photocatalysts but also for understanding the photocatalysis process. Moreover, the fibril titania photocatalysts are of great advantage when they are separated from a liquid for reuse by filtration, sedimentation, or centrifugation, compared to nanoparticles of the same scale. The surface structure of TiO2 also plays a significant role in catalysis and photocatalysis. Four types of large surface area TiO2 nanotubes with different phase compositions (labelled as NTA, NTBA, NTMA and NTM) were synthesised from calcination and acid treatment of the H-titanate nanotubes. Using the in situ FTIR emission spectrescopy (IES), desorption and re-adsorption process of surface OH-groups on oxide surface can be trailed. In this work, the surface OH-group regeneration ability of the TiO2 nanotubes was investigated. The ability of the four samples distinctively different, having the order: NTA > NTBA > NTMA > NTM. The same order was observed for the catalytic when the samples served as photocatalysts for the decomposition of synthetic dye SRB under UV light, as the supports of gold (Au) catalysts (where gold particles were loaded by a colloid-based method) for photodecomposition of formaldehyde under visible light and for catalytic oxidation of CO at low temperatures. Therefore, the ability of TiO2 nanotubes to generate surface OH-groups is an indicator of the catalytic activity. The reason behind the correlation is that the oxygen vacancies at bridging O2- sites of TiO2 surface can generate surface OH-groups and these groups facilitate adsorption and activation of O2 molecules, which is the key step of the oxidation reactions. The structure of the oxygen vacancies at bridging O2- sites is proposed. Also a new mechanism for the photocatalytic formaldehyde decomposition with the Au-TiO2 catalysts is proposed: The visible light absorbed by the gold nanoparticles, due to surface plasmon resonance effect, induces transition of the 6sp electrons of gold to high energy levels. These energetic electrons can migrate to the conduction band of TiO2 and are seized by oxygen molecules. Meanwhile, the gold nanoparticles capture electrons from the formaldehyde molecules adsorbed on them because of gold’s high electronegativity. O2 adsorbed on the TiO2 supports surface are the major electron acceptor. The more O2 adsorbed, the higher the oxidation activity of the photocatalyst will exhibit. The last part of this thesis demonstrates two innovative applications of the titanate nanostructures. Firstly, trititanate and metastable titanate (Na1.5H0.5Ti3O7) nanofibres are used as intelligent absorbents for removal of radioactive cations and heavy metal ions, utilizing the properties of the ion exchange ability, deformable layered structure, and fibril morphology. Environmental contamination with radioactive ions and heavy metal ions can cause a serious threat to the health of a large part of the population. Treatment of the wastes is needed to produce a waste product suitable for long-term storage and disposal. The ion-exchange ability of layered titanate structure permitted adsorption of bivalence toxic cations (Sr2+, Ra2+, Pb2+) from aqueous solution. More importantly, the adsorption is irreversible, due to the deformation of the structure induced by the strong interaction between the adsorbed bivalent cations and negatively charged TiO6 octahedra, and results in permanent entrapment of the toxic bivalent cations in the fibres so that the toxic ions can be safely deposited. Compared to conventional clay and zeolite sorbents, the fibril absorbents are of great advantage as they can be readily dispersed into and separated from a liquid. Secondly, new generation membranes were constructed by using large titanate and small ã-alumina nanofibres as intermediate and top layers, respectively, on a porous alumina substrate via a spin-coating process. Compared to conventional ceramic membranes constructed by spherical particles, the ceramic membrane constructed by the fibres permits high flux because of the large porosity of their separation layers. The voids in the separation layer determine the selectivity and flux of a separation membrane. When the sizes of the voids are similar (which means a similar selectivity of the separation layer), the flux passing through the membrane increases with the volume of the voids which are filtration passages. For the ideal and simplest texture, a mesh constructed with the nanofibres 10 nm thick and having a uniform pore size of 60 nm, the porosity is greater than 73.5 %. In contrast, the porosity of the separation layer that possesses the same pore size but is constructed with metal oxide spherical particles, as in conventional ceramic membranes, is 36% or less. The membrane constructed by titanate nanofibres and a layer of randomly oriented alumina nanofibres was able to filter out 96.8% of latex spheres of 60 nm size, while maintaining a high flux rate between 600 and 900 Lm–2 h–1, more than 15 times higher than the conventional membrane reported in the most recent study.

Molekyylibiologisten menetelmien kehittäminen ihmisen suoliston sulfaattia pelkistävien bakteerien määrittämiseksi

Ihmisen ruuansulatuskanavan bakteeriston kehitys alkaa syntymästä, jolloin ensimmäiset bakteerit kansoittavat steriilin ruuansulatuskanavan. Bakteeristo kehittyy perimän, ympäristön ja varhaisen ruokavalion vaikutuksesta kohti monimuotoisempaa bakteeripopulaatiota. Aikuisen ruuansulatuskanavan normaalibakteeristo on varsin muuttumaton, mutta siihen vaikuttavat monet tekijät, kuten ikä, terveydentila, ruokavalio ja antibioottien käyttö. Bakteeriston koostumus vaihtelee ruuansulatuskanavan eri osissa ja bakteerimäärä kasvaa kohti paksusuolta, ollen paksusuolessa ja ulosteessa peräti 1010-1012 pmy/ml. Suurin osa ruuansulatuskanavan bakteereista on anaerobeja. Ruuansulatuskanavan bakteeristo vaikuttaa muun muassa suoliston kehittymiseen ja hiilihydraattien ja proteiinien hajotukseen sekä toimii osana immuunipuolustusta. Sulfaattia pelkistävät bakteerit (SRB) ovat monimuotoinen ryhmä pääosin anaerobisia bakteereita, jotka käyttävät aineenvaihdunnassaan elektronin vastaanottajana sulfaattia muuttaen sen lopulta sulfidiksi. SRB:t ovat sopeutuneet useisiin erilaisiin ympäristöihin. Niitä tavataan mm. vesistöjen sedimenteissä sekä ihmisen ruuansulatuskanavassa. Ihmisen ruuansulatuskanavassa on SRB:ta n. 105-108 pmy/g, ja niitä on löydetty erityisesti anaerobisista osista kuten suun ientaskuista ja paksusuolesta. SRB:t voivat olla haitaksi ruuansulatuskanavalle tuottamansa sulfidin vuoksi, joka esiintyy vesiliuoksessa vetysulfidina. Tämän on havaittu olevan toksista suoliston epiteelisoluille. Viimeaikoina on kiinnostuttu sulfaatinpelkistäjien yhteydestä suoliston sairaustiloihin, kuten tulehduksellisiin suolistosairauksiin (IBD). Pro gradu -tutkimukseni tavoitteena oli kehittää PCR-DGGE- ja qPCR-menetelmät ulosteen sulfaattia pelkistävien bakteerien määritykseen. Kohdegeeninä menetelmänkehityksessä käytettiin dsrAB-geeniä, joka koodaa dissimilatorista sulfiitinpelkistysentsyymiä. dsrAB-geeni on sulfaatinpelkistäjille ominainen konservoitunut geenialue, johon perustuvia tutkimuksia ei vielä ole paljon ihmispuolelta. qPCR-menetelmä saatiin optimoitua herkäksi ja spesifiseksi käyttäen dsrA-geenispesifisiä alukkeita, mutta PCR-DGGE-menetelmää ei saatu optimoitua käytössä olleilla alukkeilla, jotka monistivat PCR-DGGE:ssa myös negatiivikontrollikantoja. Tutkittaessa qPCR:lla IBD:tä (Crohn ja ulseratiivinen koliitti) sairastavien lasten ja terveiden kontrollihenkilöiden ulostenäytteistä eristettyä DNA:ta, merkittävää eroa SRB-määrissä ei havaittu eri ryhmien välillä. Crohnin tautia sairastavien aktiivisen vaiheen ja oireettoman vaiheen näytteiden välillä oli kuitenkin tilastollisesti merkitsevä ero (SRB-määrät; oireeton vaihe>oireellinen vaihe) (P <0,05).

Influence of the highest occupied molecular orbital energy level of the donor material on the effectiveness of the anode buffer layer in organic solar cells

Efficiency of organic photovoltaic cells based on organic electron donor/organic electron acceptor junctions can be strongly improved when the transparent conductive Anode is coated with a Buffer Layer (ABL). Here, the effects of a metal (gold) or oxide (molybdenum oxide) ABL are reported, as a function of the Highest Occupied Molecular Orbital (HOMO) of different electron donors. The results indicate that a good matching between the work function of the anode and the highest occupied molecular orbital of the donor material is the major factor limiting the hole transfer efficiency. Indeed, gold is efficient as ABL only when the HOMO of the organic donor is close to its work function Phi(Au). Therefore we show that the MoO(3) oxide has a wider field of application as ABL than gold. (C) 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim

About the transparent electrode of the organic photovoltaic cells

Electrodes and the nature of their contact with organic materials play a crucial role in the realization of efficient optoelectronic components. Whether the injection (organic light-emitting diodes - OLEDs) or collection (organic photovoltaic cells - OPV cells) of carriers, contacts must be as efficient as possible. To do this, it is customary to refer to electrode surface treatment and/or using a buffer layer all things to optimize the contact. Efficiency of organic photovoltaic cells based on organic electron donor/organic electron acceptor junctions can be strongly improved when the transparent conductive anode is coated with a buffer layer (ABL). We show that an ultra-thin gold (0.5 nm) or a thin molybdenum oxide (3-5 nm) can be used as efficient ABL. However, the effects of these ABL depend on the highest occupied molecular orbital (HOMO) of different electron donors of the OPV cells. The results indicate that, in the case of metal ABL, a good matching between the work function of the anode and the highest occupied molecular orbital of the donor material is the major factor limiting the hole transfer efficiency. Indeed, gold is efficient as ABL only when the HOMO of the organic donor is close to its work function Phi(Au). MoO3 has a wider field of application as ABL than gold. The role of the oxide is not so clearly understood than that of Au, different models proposed to interpret the experimental results are discussed.

Dinuclear zinc bis(thiosemicarbazone) complexes: Synthesis, in vitro anticancer activity, cellular uptake and DNA interaction study

Four dinucleating bis(thiosemicarbazone) ligands and their zinc complexes have been synthesized and characterized by multinuclear NMR (H-1 and C-13), IR, UV-Vis, ESI-MS and fluorescence spectroscopic techniques. Their purity was assessed by elemental analysis. Cytotoxicity was tested against five human cancer cell lines using the sulphorhodamine B (SRB) assay, where one of the complexes, 1,3-bis{biacetyl-2'-(4 `'-N-pyrrolidinylthiosemicarbazone)-3'-(4 `'-N-pyrrolidinylthiosemicarbazone) zinc(II)} propane (6), was found to be quite cytotoxic against MCF-7 (breast cancer) and HepG2 (hepatoma cancer) cell lines, with a potency similar to that of the well known anticancer drug adriamycin. It is evident from the cellular uptake studies that the uptake is same for the active complex 6 and the inactive complex 8 (1,6-bis{biacetyl- 2'-(4 `'-N-pyrrolidinylthiosemicarbazone)-3'-(4 `'-N-pyrrolidinylthiosemicarbazone) zinc(II)} hexane) in MCF-7 and HepG2 cell lines. In vitro DNA binding and cleavage studies revealed that all complexes bind with DNA through electrostatic interaction, and cause no significant cleavage of DNA. (C) 2'13 Elsevier B. V. All rights reserved.